dmesg attached This is a new, the maximum latency I got with debug enabled was little over 3 seconds.... For a while I was worried that debugging actually masked the problem! On Mon, 13 Apr 2009 11:02:51 +0800 Zhang Rui <rui.zhang@xxxxxxxxx> wrote: > CC Alexey because this is EC related. > The high letancy is probably spent on accessing the EC address space > in _TMP method. > > Tiago, > please make sure your kernel is built with CONFIG_ACPI_DEBUG set > and then > 1. boot with printk.time=1 acpi.debug_level=0x07 > acpi.debug_layer=0x04000018 > 2. run cat /sys/class/thermal/thermal_zone0/temp > 3. attach the full dmesg output. > > thanks, > rui > > On Mon, 2009-04-13 at 10:28 +0800, Tiago Simões Batista wrote: > > acpidump output attached. > > > > I found no latency on battery iterface, included is another poke at > > the thermal zone for comparison. > > > > This problem is still present, but at the moment, I shut down the > > sensors-applet on the gnome panel, so that it no longer makes > > gnome-panel stall. > > > > $ time cat /sys/class/thermal/thermal_zone0/temp > > 49000 > > > > real 0m13.476s > > user 0m0.001s > > sys 0m0.001s > > $ time cat /sys/class/power_supply/BAT0/* > > 0 > > 29 > > 0 > > 0 > > cat: /sys/class/power_supply/BAT0/device: Is a directory > > 582640000 > > 65120000 > > 18710000 > > SMP-SONY > > 04ZL > > cat: /sys/class/power_supply/BAT0/power: Is a directory > > 0 > > 0 > > 1 > > Full > > cat: /sys/class/power_supply/BAT0/subsystem: Is a directory > > Li-ion > > 270 > > Battery > > PHYSDEVPATH=/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0b/PNP0C09:00/ACPI0001:00/ACPI0002:00 > > PHYSDEVBUS=acpi > > PHYSDEVDRIVER=sbs > > POWER_SUPPLY_NAME=BAT0 > > POWER_SUPPLY_TYPE=Battery > > POWER_SUPPLY_STATUS=Full > > POWER_SUPPLY_PRESENT=1 > > POWER_SUPPLY_TECHNOLOGY=Li-ion > > POWER_SUPPLY_VOLTAGE_MIN_DESIGN=14800000 > > POWER_SUPPLY_VOLTAGE_NOW=15611000 > > POWER_SUPPLY_CURRENT_NOW=0 > > POWER_SUPPLY_CURRENT_AVG=0 > > POWER_SUPPLY_POWER_NOW=0 > > POWER_SUPPLY_POWER_AVG=0 > > POWER_SUPPLY_CAPACITY=29 > > POWER_SUPPLY_ENERGY_FULL_DESIGN=65120000 > > POWER_SUPPLY_ENERGY_FULL=582640000 > > POWER_SUPPLY_ENERGY_NOW=18710000 > > POWER_SUPPLY_TEMP=270 > > POWER_SUPPLY_MODEL_NAME=04ZL > > POWER_SUPPLY_MANUFACTURER=SMP-SONY > > 14800000 > > 15611000 > > > > real 0m0.110s > > user 0m0.001s > > sys 0m0.004s > > > > > > On Mon, 13 Apr 2009 09:43:42 +0800 > > Zhang Rui <rui.zhang@xxxxxxxxx> wrote: > > > > > this sounds like an EC problem to me. please attach the acpidump > > > output. is there a long latency when you poke other ACPI devices, > > > say battery? > > > > > > thanks, > > > rui > > > > > > On Mon, 2009-04-13 at 00:03 +0800, Tiago Simões Batista wrote: > > > > On Sat, 11 Apr 2009 23:16:11 +0100 > > > > Tiago Simões Batista <tiagosbatista@xxxxxxxxx> wrote: > > > > > > > > > Sorry about the noise, by brain was stopped when I sent the > > > > > last mail, please ignore the From address, it is wrong! > > > > > > > > > > On Sat, 11 Apr 2009 12:14:16 -0700 > > > > > Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx> wrote: > > > > > > > > > > > (cc linux-acpi) > > > > > > > > > > > > On Sat, 11 Apr 2009 15:56:12 +0100 "Tiago Sim__es Batista" > > > > > > <tiagosbatista@xxxxxxxxx> wrote: > > > > > > > > > > > > > Hi all > > > > > > > > > > > > > > Yesterday, I recompiled my kernel (git + tuxonice) > > > > > > > v2.6.30-rc1-1002-gac91f91, there were a couple of issues, > > > > > > > the main one is ilustrated bellow. > > > > > > > > > > > > > > I am not familiar with the kernel code, but if you give me > > > > > > > some pointers, I will be glad to investigate this further > > > > > > > > > > > > > > $time cat /sys/class/thermal/thermal_zone0/temp > > > > > > > 34000 > > > > > > > > > > > > > > real 0m6.613s > > > > > > > user 0m0.000s > > > > > > > sys 0m0.001s > > > > > > > > > > > > > > > > > > > Is this a regression? Was 2.6.29 OK? > > > > > > > > > > > > Thanks. > > > > > > > > > > My last kernel was fine: > > > > > > > > > > $ time cat /sys/class/thermal/thermal_zone0/temp > > > > > 48000 > > > > > > > > > > real 0m0.007s > > > > > user 0m0.001s > > > > > sys 0m0.007s > > > > > > > > > > > > > > > I also forgot to add some information about my kernels... > > > > > > > > > > The good one is 2.6.29 + tuxonice as it was the day after the > > > > > 2.6.29 kernel was released. > > > > > > > > > > The bad one is a pull from linus tree on april the 9th plus > > > > > tuxonice on the same day > > > > > > > > > > from git (hope this helps): > > > > > $ git describe v2.6.29-tiago2-ice > > > > > v2.6.29-836-g00492ed > > > > > $ git describe v2.6.30-rc1-tiago1-ice > > > > > v2.6.30-rc1-1002-gac91f91 > > > > > > > > > > > > > > > If tuxonice is a suspect, I will be glad to remove it and > > > > > recompile. If I have the time later this weekend, and nothing > > > > > was found, I will try to bisect this. > > > > > > > > > > > > > Here are some results from the bisect: > > > > The metric I used to mark a revision as good/bad was > > > > $ time for ((i =0; i < 100; i++)); do > > > > cat /sys/class/thermal/thermal_zone0/temp > /dev/null; > > > > done > > > > > > > > The bad ones take forever, i never even finished one bad run. > > > > The good ones take about half a second. > > > > > > > > When I checked out revisions v2.6.29-148-g33526a5 and > > > > v2.6.29-159-g8a3f257, it took almost 2 secons to run the > > > > command, so I think some of the latency my have been introduced > > > > around these. Yet, I still marked them as good. > > > > > > > > The resut was: > > > > 478c6a43fcbc6c11609f8cee7c7b57223907754f is first bad commit > > > > witch is a merge. I am out of ideas... > > > > > > > > I forgot to ask, am I the only one experiencing this? I am > > > > using a TravelMate 4000 with the intel graphics chip, can > > > > anyone reproduce this? If no one can reproduce this, I can > > > > still test a vanilla kernel to remove TOI from the equation! > > > > > > > > Tiago > > > > > > > > > > > > Below is the bisect log: > > > > $ git bisect log > > > > git bisect start > > > > # bad: [ac91f917d7ed7d1ebe14532ee137fcd759b4406d] Merge branch > > > > 'all' into all-tuxonice git bisect bad > > > > ac91f917d7ed7d1ebe14532ee137fcd759b4406d # good: > > > > [178a426510a901d9335f39d3391ae5e8628a36d1] Merge branch > > > > 'tuxonice' into all-tuxonice git bisect good > > > > 178a426510a901d9335f39d3391ae5e8628a36d1 # good: > > > > [fdf9c9979a355916433262ea5e5e64bed5def86e] V4L/DVB (10465): > > > > dsbr100: Add few lost mutex locks. git bisect good > > > > fdf9c9979a355916433262ea5e5e64bed5def86e # good: > > > > [edbd606c4671fcd439164c8d63e896044d706156] Staging: wlan-ng: > > > > Replace WLAN_LOG_ERROR() with printk() git bisect good > > > > edbd606c4671fcd439164c8d63e896044d706156 # good: > > > > [3516c6a8dc0b1153c611c4cf0dc4a51631f052bb] Merge > > > > git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 > > > > git bisect good 3516c6a8dc0b1153c611c4cf0dc4a51631f052bb # bad: > > > > [3989203290fba6fdf6bc4825fbf6526e1bf17977] Merge > > > > git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 git > > > > bisect bad 3989203290fba6fdf6bc4825fbf6526e1bf17977 # bad: > > > > [d7ca6f8cdffa5765e486edb3dada9121fba8e6aa] Merge branch > > > > 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight git > > > > bisect bad d7ca6f8cdffa5765e486edb3dada9121fba8e6aa # good: > > > > [3b4dadf05d177289c279c50030c7c75e004952bb] Merge branch > > > > 'acpi_enforce_resources' into release git bisect good > > > > 3b4dadf05d177289c279c50030c7c75e004952bb # bad: > > > > [32fb6c17566ec66de87324a834c7776f40e35e78] Merge branch > > > > 'release' of > > > > git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 > > > > git bisect bad 32fb6c17566ec66de87324a834c7776f40e35e78 # good: > > > > [45e36c1666aa6c8b0c538abcf984b336184d8c3f] Merge > > > > git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 git > > > > bisect good 45e36c1666aa6c8b0c538abcf984b336184d8c3f # good: > > > > [33526a53600ac887d100e3c9b4be3637ac8ae3a5] Merge branch 'x2apic' > > > > into release git bisect good > > > > 33526a53600ac887d100e3c9b4be3637ac8ae3a5 # good: > > > > [c542aadeb4700bc316834d862d52ba3d2664f13a] panasonic-laptop: Fix > > > > autoloading git bisect good > > > > c542aadeb4700bc316834d862d52ba3d2664f13a # bad: > > > > [478c6a43fcbc6c11609f8cee7c7b57223907754f] Merge branch 'linus' > > > > into release git bisect bad > > > > 478c6a43fcbc6c11609f8cee7c7b57223907754f # good: > > > > [15065531c1c5902775ae3ade24eb37d0e688353b] toshiba-acpi: remove > > > > MAINTAINERS entry git bisect good > > > > 15065531c1c5902775ae3ade24eb37d0e688353b # good: > > > > [8a3f257c704e02aee9869decd069a806b45be3f1] Merge branch 'misc' > > > > into release git bisect good > > > > 8a3f257c704e02aee9869decd069a806b45be3f1 > > > > > >
Attachment:
dmesg
Description: Binary data
