Re: [PATCH v2 2/3] ACPI: Behave uniquely based on processor declaration definition type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2008-11-03 at 08:10 +0800, Myron Stowe wrote:
> On Fri, 2008-10-31 at 09:19 +0800, Zhao Yakui wrote:
> > On Fri, 2008-10-31 at 06:13 +0800, Myron Stowe wrote:
> > > Associating a Local SAPIC with a processor object is dependent upon the
> > > processor object's definition type.  CPUs declared as "Processor" should
> > > use the Local SAPIC's 'processor_id', and CPUs declared as "Device"
> > > should use the 'uid'.  Note that for "Processor" declarations, even if a
> > > '_UID' child object exists, it has no bearing with respect to mapping
> > > Local SAPICs (see section 5.2.11.13 - Local SAPIC Structure; "Advanced
> > > Configuration and Power Interface Specification", Revision 3.0b).
> > > 
> > > This patch changes the lsapic mapping logic to rely on the distinction of
> > > how the processor object was declared - the mapping can't just try both
> > > types of matches irregardless of declaration type and rely on one failing
> > > as is currently being done.
> > > 
> > > Signed-off-by: Myron Stowe <myron.stowe@xxxxxx>
> > > Cc: Alexey Starikovskiy <aystarik@xxxxxxxxx>
> > > Cc: Zhao Yakui <yakui.zhao@xxxxxxxxx>
> > > ---
> > > 
> > >  drivers/acpi/processor_core.c |   75 +++++++++++++++++++++++------------------
> > >  1 files changed, 42 insertions(+), 33 deletions(-)
> > > 
> > > diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
> > > index 0c670dd..35d33e8 100644
> > > --- a/drivers/acpi/processor_core.c
> > > +++ b/drivers/acpi/processor_core.c
> > > @@ -410,7 +410,7 @@ static int acpi_processor_remove_fs(struct acpi_device *device)
> > >  /* Use the acpiid in MADT to map cpus in case of SMP */
> > >  
> > >  #ifndef CONFIG_SMP
> > > -static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;}
> > > +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id) { return -1; }
> > >  #else
> > >  
> > >  static struct acpi_table_madt *madt;
> > > @@ -429,27 +429,35 @@ static int map_lapic_id(struct acpi_subtable_header *entry,
> > >  }
> > >  
> > >  static int map_lsapic_id(struct acpi_subtable_header *entry,
> > > -		  u32 acpi_id, int *apic_id)
> > > +		int device_declaration, u32 acpi_id, int *apic_id)
> > >  {
> > >  	struct acpi_madt_local_sapic *lsapic =
> > >  		(struct acpi_madt_local_sapic *)entry;
> > > +	u32 tmp = (lsapic->id << 8) | lsapic->eid;
> > > +
> > >  	/* Only check enabled APICs*/
> > > -	if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
> > > -		/* First check against id */
> > > -		if (lsapic->processor_id == acpi_id) {
> > > -			*apic_id = (lsapic->id << 8) | lsapic->eid;
> > > -			return 1;
> > > -		/* Check against optional uid */
> > > -		} else if (entry->length >= 16 &&
> > > -			lsapic->uid == acpi_id) {
> > > -			*apic_id = lsapic->uid;
> > > -			return 1;
> > > -		}
> > > -	}
> > > +	if (!(lsapic->lapic_flags & ACPI_MADT_ENABLED))
> > > +		return 0;
> > > +
> > > +	/* Device statement declaration type */
> > > +	if (device_declaration) {
> > > +		if (entry->length < 16)
> > > +			printk(KERN_ERR PREFIX
> > > +			    "Invalid LSAPIC with Device type processor (SAPIC ID %#x)\n",
> > > +			    tmp);
> > > +		else if (lsapic->uid == acpi_id)
> > > +			goto found;
> > > +	/* Processor statement declaration type */
> > > +	} else if (lsapic->processor_id == acpi_id)
> > > +		goto found;
> > > +
> > >  	return 0;
> > > +found:
> > > +	*apic_id = tmp;
> > > +	return 1;
> > >  }
> > >  
> > > -static int map_madt_entry(u32 acpi_id)
> > > +static int map_madt_entry(int type, u32 acpi_id)
> > >  {
> > >  	unsigned long madt_end, entry;
> > >  	int apic_id = -1;
> > > @@ -470,7 +478,7 @@ static int map_madt_entry(u32 acpi_id)
> > >  			if (map_lapic_id(header, acpi_id, &apic_id))
> > >  				break;
> > >  		} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
> > > -			if (map_lsapic_id(header, acpi_id, &apic_id))
> > > +			if (map_lsapic_id(header, type, acpi_id, &apic_id))
> > >  				break;
> > >  		}
> > >  		entry += header->length;
> > > @@ -478,7 +486,7 @@ static int map_madt_entry(u32 acpi_id)
> > >  	return apic_id;
> > >  }
> > >  
> > > -static int map_mat_entry(acpi_handle handle, u32 acpi_id)
> > > +static int map_mat_entry(acpi_handle handle, int type, u32 acpi_id)
> > >  {
> > >  	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
> > >  	union acpi_object *obj;
> > > @@ -501,7 +509,7 @@ static int map_mat_entry(acpi_handle handle, u32 acpi_id)
> > >  	if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
> > >  		map_lapic_id(header, acpi_id, &apic_id);
> > >  	} else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
> > > -		map_lsapic_id(header, acpi_id, &apic_id);
> > > +		map_lsapic_id(header, type, acpi_id, &apic_id);
> > >  	}
> > >  
> > >  exit:
> > > @@ -510,14 +518,14 @@ exit:
> > >  	return apic_id;
> > >  }
> > >  
> > > -static int get_cpu_id(acpi_handle handle, u32 acpi_id)
> > > +static int get_cpu_id(acpi_handle handle, int type, u32 acpi_id)
> > >  {
> > >  	int i;
> > >  	int apic_id = -1;
> > >  
> > > -	apic_id = map_mat_entry(handle, acpi_id);
> > > +	apic_id = map_mat_entry(handle, type, acpi_id);
> > >  	if (apic_id == -1)
> > > -		apic_id = map_madt_entry(acpi_id);
> > > +		apic_id = map_madt_entry(type, acpi_id);
> > >  	if (apic_id == -1)
> > >  		return apic_id;
> > >  
> > > @@ -533,15 +541,16 @@ static int get_cpu_id(acpi_handle handle, u32 acpi_id)
> > >                                   Driver Interface
> > >     -------------------------------------------------------------------------- */
> > >  
> > > -static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > > +static int acpi_processor_get_info(struct acpi_device *device)
> > >  {
> > >  	acpi_status status = 0;
> > >  	union acpi_object object = { 0 };
> > >  	struct acpi_buffer buffer = { sizeof(union acpi_object), &object };
> > > -	int cpu_index;
> > > +	struct acpi_processor *pr;
> > > +	int cpu_index, device_declaration = 0;
> > >  	static int cpu0_initialized;
> > >  
> > > -
> > > +	pr = acpi_driver_data(device);
> > >  	if (!pr)
> > >  		return -EINVAL;
> > >  
> > > @@ -562,8 +571,11 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > >  		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
> > >  				  "No bus mastering arbitration control\n"));
> > >  
> > > -	/* Check if it is a Device with HID and UID */
> > > -	if (has_uid) {
> > > +	if (!strcmp(acpi_device_hid(device), ACPI_PROCESSOR_HID)) {
> > > +		/*
> > > +		 * Declared with "Device" statement; match _UID.
> > > +		 * Note that we don't handle string _UIDs yet.
> > Looks very good. 
> > Can you add the check whether the device.flags.unique_id exists before
> > evaluating the _UID object? 
> > If not exist, it indicates that the processor definition is incorrect.
> 
> The additional check would create a relationship with
> 'device.flags.unique_id' which seems redundant and would introduce
> unnecessary complexity going forward.  While such an additional check
> would possibly short circuit the call to 'acpi_evaluate_integer()' -
> when FW is in error and a _UID child object does not exist; a case that
> is already caught - this code is not in a performance path and thus
> seems to yield no benefit.
In your patch the device.flags.unique_id is not used. Maybe on some
systems the processor is defined by Device. But there is no _UID
object.This is incorrect. 
   IMO in such case we should catch such error.
  
Best regards.
   Yakui
> Was there some other aspect that you were thinking of?
> 
> Myron
> 
> > Thanks.
> > > +		 */
> > >  		unsigned long long value;
> > >  		status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
> > >  						NULL, &value);
> > > @@ -571,13 +583,10 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > >  			printk(KERN_ERR PREFIX "Evaluating processor _UID\n");
> > >  			return -ENODEV;
> > >  		}
> > > +		device_declaration = 1;
> > >  		pr->acpi_id = value;
> > >  	} else {
> > > -		/*
> > > -		* Evalute the processor object.  Note that it is common on SMP to
> > > -		* have the first (boot) processor with a valid PBLK address while
> > > -		* all others have a NULL address.
> > > -		*/
> > > +		/* Declared with "Processor" statement; match ProcessorID */
> > >  		status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
> > >  		if (ACPI_FAILURE(status)) {
> > >  			printk(KERN_ERR PREFIX "Evaluating processor object\n");
> > > @@ -590,7 +599,7 @@ static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
> > >  		*/
> > >  		pr->acpi_id = object.processor.proc_id;
> > >  	}
> > > -	cpu_index = get_cpu_id(pr->handle, pr->acpi_id);
> > > +	cpu_index = get_cpu_id(pr->handle, device_declaration, pr->acpi_id);
> > >  
> > >  	/* Handle UP system running SMP kernel, with no LAPIC in MADT */
> > >  	if (!cpu0_initialized && (cpu_index == -1) &&
> > > @@ -662,7 +671,7 @@ static int __cpuinit acpi_processor_start(struct acpi_device *device)
> > >  
> > >  	pr = acpi_driver_data(device);
> > >  
> > > -	result = acpi_processor_get_info(pr, device->flags.unique_id);
> > > +	result = acpi_processor_get_info(device);
> > >  	if (result) {
> > >  		/* Processor is physically not present */
> > >  		return 0;
> > > 
> > 

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux