On Fri, Jun 13, 2008 at 12:07:45PM +0100, Luke Sharkey wrote: > Example sensors output: > k8temp-pci-00c3 > Adapter: PCI adapter > Core0 Temp: +54.0°C 54 degrees is fine. > state: ok > temperature: 0 C > critical (S5): 94 C > passive: 90 C: tc1=2 tc2=5 tsp=50 devices=CPU0 Can you attach the output of the acpidump command? The BIOS is presumably reading the temperature without any trouble, given the fan behaviour, so it would be nice to check why Linux isn't picking it up. Do you get the same readings if you don't load the k8temp module? Also, make sure no other sensors modules are loaded. They can potentially interfere with ACPI. -- Matthew Garrett | mjg59@xxxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
