Hello,
My log say :
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify
linux-acpi@xxxxxxxxxxxxxxx
so ...
My laptop work fine.
++
[ 0.000000] Linux version 2.6.24-16-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 13:23:42 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable)
[ 0.000000] BIOS-e820: 000000003fe90000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5c10
[ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261776
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261776
[ 0.000000] On node 0 totalpages: 261776
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32147 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F5A70 checksum 0
[ 0.000000] ACPI: RSDP 000F5A70, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 3FE94FDC, 0058 (r1 ACRSYS ACRPRDCT 6040000 INNA 0)
[ 0.000000] ACPI: FACP 3FE9DC78, 0074 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: DSDT 3FE96D79, 6EFF (r1 INTEL CALISTGA 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FE9EFC0, 0040
[ 0.000000] ACPI: APIC 3FE9DCEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3FE9DD54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3FE9DD8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 3FE9DDC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
[ 0.000000] ACPI: SLIC 3FE9DDFA, 0176 (r1 ACRSYS ACRPRDCT 6040000 ANNI 1)
[ 0.000000] ACPI: APIC 3FE9DF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: BOOT 3FE9DFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3FE9672A, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE96098, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE955C0, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE9551A, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE95034, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx
[ 0.000000] ACPI: DMI detected: Acer
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec28000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 2, version 255, address 0xfec28000, GSI 24-279
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259731
[ 0.000000] Kernel command line: root=UUID=063e7a9a-f0be-4492-bb3a-5efe17d25851 ro splash
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] mapped IOAPIC to ffff9000 (fec28000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1729.275 MHz processor.
[ 15.373897] Console: colour VGA+ 80x25
[ 15.373904] console [tty0] enabled
[ 15.378885] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 15.379614] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 15.432588] Memory: 1023816k/1047104k available (2157k kernel code, 22560k reserved, 998k data, 364k init, 129600k highmem)
[ 15.432689] virtual kernel memory layout:
[ 15.432692] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
[ 15.432695] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 15.432697] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 15.432700] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 15.432703] .init : 0xc041b000 - 0xc0476000 ( 364 kB)
[ 15.432706] .data : 0xc031b5a4 - 0xc0414dc4 ( 998 kB)
[ 15.432708] .text : 0xc0100000 - 0xc031b5a4 (2157 kB)
[ 15.433213] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 15.433398] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[ 15.433632] hpet clockevent registered
[ 15.513615] Calibrating delay using timer specific routine.. 3463.46 BogoMIPS (lpj=6926921)
[ 15.513779] Security Framework initialized
[ 15.513853] SELinux: Disabled at boot.
[ 15.513938] AppArmor: AppArmor initialized
[ 15.514008] Failure registering capabilities with primary security module.
[ 15.514088] Mount-cache hash table entries: 512
[ 15.514363] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[ 15.514380] monitor/mwait feature present.
[ 15.514447] using mwait in idle threads.
[ 15.514514] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 15.514623] CPU: L2 cache: 1024K
[ 15.514686] CPU: Physical Processor ID: 0
[ 15.514749] CPU: Processor Core ID: 0
[ 15.514812] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[ 15.514830] Compat vDSO mapped to ffffe000.
[ 15.514914] Checking 'hlt' instruction... OK.
[ 15.530378] SMP alternatives: switching to UP code
[ 15.533925] Early unpacking initramfs... done
[ 16.421096] ACPI: Core revision 20070126
[ 16.421284] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 16.468486] CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
[ 16.468727] SMP alternatives: switching to SMP code
[ 16.470029] Booting processor 1/1 eip 3000
[ 16.480328] Initializing CPU#1
[ 16.557259] Calibrating delay using timer specific routine.. 3458.55 BogoMIPS (lpj=6917104)
[ 16.557272] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000 00000000
[ 16.557284] monitor/mwait feature present.
[ 16.557290] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 16.557294] CPU: L2 cache: 1024K
[ 16.557298] CPU: Physical Processor ID: 0
[ 16.557302] CPU: Processor Core ID: 1
[ 16.557305] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940 0000c189 00000000 00000000 00000000
[ 16.557945] CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz stepping 0c
[ 16.558632] Total of 2 processors activated (6922.01 BogoMIPS).
[ 16.560250] ENABLING IO-APIC IRQs
[ 16.560580] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 16.705402] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 16.725541] Brought up 2 CPUs
[ 16.725676] CPU0 attaching sched-domain:
[ 16.725681] domain 0: span 03
[ 16.725685] groups: 01 02
[ 16.725692] CPU1 attaching sched-domain:
[ 16.725696] domain 0: span 03
[ 16.725700] groups: 02 01
[ 16.726146] net_namespace: 64 bytes
[ 16.726221] Booting paravirtualized kernel on bare hardware
[ 16.727268] Time: 5:38:12 Date: 05/22/08
[ 16.727383] NET: Registered protocol family 16
[ 16.727847] EISA bus registered
[ 16.727917] ACPI: bus type pci registered
[ 16.728297] PCI: PCI BIOS revision 2.10 entry at 0xfd5a3, last bus=10
[ 16.728370] PCI: Using configuration type 1
[ 16.728433] Setting up standard PCI resources
[ 16.735894] ACPI: EC: Look up EC in DSDT
[ 16.740047] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 16.740119] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@xxxxxxxxxxxxxxx
[ 16.741087] ACPI: Interpreter enabled
[ 16.741154] ACPI: (supports S0 S3 S4 S5)
[ 16.741419] ACPI: Using IOAPIC for interrupt routing
[ 16.742161] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 16.756812] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 16.756887] ACPI: EC: driver started in interrupt mode
[ 16.757043] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 16.758203] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 16.758278] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 16.760005] PCI: Transparent bridge - 0000:00:1e.0
[ 16.760227] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 16.760892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 16.761191] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 16.761481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 16.761762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 16.762042] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 16.762352] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 16.779112] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
[ 16.779567] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
[ 16.780015] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
[ 16.780464] ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
[ 16.780911] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
[ 16.781468] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
[ 16.782008] ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
[ 16.782456] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
[ 16.783013] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 16.783143] pnp: PnP ACPI init
[ 16.783219] ACPI: bus type pnp registered
[ 16.788907] pnp: PnP ACPI: found 11 devices
[ 16.788976] ACPI: ACPI bus type pnp unregistered
[ 16.789044] PnPBIOS: Disabled by ACPI PNP
[ 16.789584] PCI: Using ACPI for IRQ routing
[ 16.789654] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 16.857495] NET: Registered protocol family 8
[ 16.857564] NET: Registered protocol family 20
[ 16.857693] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 16.857942] hpet0: 3 64-bit timers, 14318180 Hz
[ 16.859068] AppArmor: AppArmor Filesystem Enabled
[ 16.861166] Time: tsc clocksource has been installed.
[ 16.861256] Switched to high resolution mode on CPU 0
[ 16.861487] Switched to high resolution mode on CPU 1
[ 16.874172] system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
[ 16.874258] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 16.876001] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 16.876084] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 16.876166] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 16.876247] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 16.876330] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 16.876413] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 16.876506] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 16.876597] system 00:06: ioport range 0x680-0x68f has been reserved
[ 16.876667] system 00:06: ioport range 0x800-0x80f has been reserved
[ 16.876737] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 16.876807] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 16.876877] system 00:06: ioport range 0x1200-0x120f has been reserved
[ 16.876952] system 00:07: ioport range 0x6a0-0x6af has been reserved
[ 16.877022] system 00:07: ioport range 0x6b0-0x6ff has been reserved
[ 16.907972] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
[ 16.908056] PCI: Bridge: 0000:00:01.0
[ 16.908118] IO window: disabled.
[ 16.908184] MEM window: d0000000-d1ffffff
[ 16.908250] PREFETCH window: b0000000-bfffffff
[ 16.908319] PCI: Bridge: 0000:00:1c.0
[ 16.908384] IO window: 2000-2fff
[ 16.908452] MEM window: c8000000-c9ffffff
[ 16.908519] PREFETCH window: c0000000-c1ffffff
[ 16.908589] PCI: Bridge: 0000:00:1c.1
[ 16.908656] IO window: 3000-3fff
[ 16.908723] MEM window: ca000000-cbffffff
[ 16.908790] PREFETCH window: c2000000-c3ffffff
[ 16.908860] PCI: Bridge: 0000:00:1c.2
[ 16.908925] IO window: 4000-4fff
[ 16.908993] MEM window: cc000000-cdffffff
[ 16.909061] PREFETCH window: c4000000-c5ffffff
[ 16.909131] PCI: Bridge: 0000:00:1c.3
[ 16.909196] IO window: 5000-5fff
[ 16.909264] MEM window: ce000000-cfffffff
[ 16.909331] PREFETCH window: c6000000-c7ffffff
[ 16.909413] PCI: Bus 11, cardbus bridge: 0000:0a:06.0
[ 16.909482] IO window: 00001400-000014ff
[ 16.909550] IO window: 00001c00-00001cff
[ 16.909618] PREFETCH window: 50000000-53ffffff
[ 16.909687] MEM window: 54000000-57ffffff
[ 16.909755] PCI: Bridge: 0000:00:1e.0
[ 16.909818] IO window: disabled.
[ 16.909886] MEM window: d2000000-d20fffff
[ 16.909953] PREFETCH window: disabled.
[ 16.910044] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 16.910183] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 16.910218] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 16.910350] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 16.910383] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 16.910515] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 16.910549] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 16.910681] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 16.910714] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 16.910846] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 16.910863] PCI: Enabling device 0000:00:1e.0 (0104 -> 0106)
[ 16.910938] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 16.910963] ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 16.911111] NET: Registered protocol family 2
[ 16.954185] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 16.954699] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 16.956285] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 16.957102] TCP: Hash tables configured (established 131072 bind 65536)
[ 16.957175] TCP reno registered
[ 16.966345] checking if image is initramfs... it is
[ 18.729919] Freeing initrd memory: 9420k freed
[ 18.730237] Simple Boot Flag at 0x36 set to 0x1
[ 18.731648] audit: initializing netlink socket (disabled)
[ 18.731734] audit(1211434694.136:1): initialized
[ 18.732137] highmem bounce pool size: 64 pages
[ 18.736410] VFS: Disk quotas dquot_6.5.1
[ 18.736644] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 18.736982] io scheduler noop registered
[ 18.737050] io scheduler anticipatory registered
[ 18.737115] io scheduler deadline registered
[ 18.737199] io scheduler cfq registered (default)
[ 18.737400] Boot video device is 0000:01:00.0
[ 18.737613] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 18.737674] assign_interrupt_mode Found MSI capability
[ 18.737789] Allocate Port Service[0000:00:01.0:pcie00]
[ 18.737932] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 18.738009] assign_interrupt_mode Found MSI capability
[ 18.738135] Allocate Port Service[0000:00:1c.0:pcie00]
[ 18.738205] Allocate Port Service[0000:00:1c.0:pcie02]
[ 18.738363] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 18.738439] assign_interrupt_mode Found MSI capability
[ 18.738566] Allocate Port Service[0000:00:1c.1:pcie00]
[ 18.738638] Allocate Port Service[0000:00:1c.1:pcie02]
[ 18.738795] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 18.738871] assign_interrupt_mode Found MSI capability
[ 18.738997] Allocate Port Service[0000:00:1c.2:pcie00]
[ 18.739066] Allocate Port Service[0000:00:1c.2:pcie02]
[ 18.739227] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 18.739303] assign_interrupt_mode Found MSI capability
[ 18.739430] Allocate Port Service[0000:00:1c.3:pcie00]
[ 18.739502] Allocate Port Service[0000:00:1c.3:pcie02]
[ 18.739988] isapnp: Scanning for PnP cards...
[ 19.095417] isapnp: No Plug & Play device found
[ 19.153456] Real Time Clock Driver v1.12ac
[ 19.153938] hpet_resources: 0xfed00000 is busy
[ 19.153985] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 19.156500] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 19.156718] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 19.156997] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 19.157507] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 19.157663] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 19.157735] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 19.157805] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 19.157872] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 19.157939] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 19.189542] mice: PS/2 mouse device common for all mice
[ 19.189849] EISA: Probing bus 0 at eisa.0
[ 19.189923] Cannot allocate resource for EISA slot 1
[ 19.189989] Cannot allocate resource for EISA slot 2
[ 19.190055] Cannot allocate resource for EISA slot 3
[ 19.190125] Cannot allocate resource for EISA slot 4
[ 19.190192] Cannot allocate resource for EISA slot 5
[ 19.190279] EISA: Detected 0 cards.
[ 19.190353] cpuidle: using governor ladder
[ 19.190417] cpuidle: using governor menu
[ 19.190638] NET: Registered protocol family 1
[ 19.190756] Using IPI No-Shortcut mode
[ 19.190866] registered taskstats version 1
[ 19.191133] Magic number: 8:754:618
[ 19.191244] hash matches device ptye8
[ 19.191316] hash matches device ptybb
[ 19.191453] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 19.191522] EDD information not available.
[ 19.191831] Freeing unused kernel memory: 364k freed
[ 19.192919] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 20.749813] fuse init (API version 7.9)
[ 20.795725] ACPI: SSDT 3FE95D9E, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 20.796229] ACPI: SSDT 3FE9581F, 04FA (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 20.800771] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 20.800783] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 20.801303] ACPI: SSDT 3FE95FDB, 00BD (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 20.801758] ACPI: SSDT 3FE95D19, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 20.803492] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 20.803505] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 20.809842] ACPI: Thermal Zone [TZS0] (37 C)
[ 20.811983] ACPI: Thermal Zone [TZS1] (46 C)
[ 21.775661] r8169 Gigabit Ethernet driver 2.2LK loaded
[ 21.775712] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.775742] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 21.776322] eth0: RTL8168b/8111b at 0xf8860000, 00:16:d3:57:17:02, XID 38000000 IRQ 218
[ 21.866838] usbcore: registered new interface driver usbfs
[ 21.866884] usbcore: registered new interface driver hub
[ 21.869972] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 21.869995] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 21.898020] usbcore: registered new device driver usb
[ 21.904472] SCSI subsystem initialized
[ 21.908403] USB Universal Host Controller Interface driver v3.0
[ 21.944708] ssb: Sonics Silicon Backplane found on PCI device 0000:05:00.0
[ 21.944953] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
[ 21.944978] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 21.944986] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 21.945360] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 21.949303] ehci_hcd 0000:00:1d.7: debug port 1
[ 21.949314] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 21.949334] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd2304000
[ 21.953604] libata version 3.00 loaded.
[ 21.964504] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.964747] usb usb1: configuration #1 chosen from 1 choice
[ 21.964798] hub 1-0:1.0: USB hub found
[ 21.964810] hub 1-0:1.0: 8 ports detected
[ 22.068692] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
[ 22.068717] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 22.068725] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 22.068776] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 22.068818] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800
[ 22.069048] usb usb2: configuration #1 chosen from 1 choice
[ 22.069099] hub 2-0:1.0: USB hub found
[ 22.069111] hub 2-0:1.0: 2 ports detected
[ 22.171608] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.171630] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.171638] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.171686] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 22.171732] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 22.171962] usb usb3: configuration #1 chosen from 1 choice
[ 22.172017] hub 3-0:1.0: USB hub found
[ 22.172029] hub 3-0:1.0: 2 ports detected
[ 22.275592] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.275616] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.275624] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.275673] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 22.275720] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 22.275949] usb usb4: configuration #1 chosen from 1 choice
[ 22.276001] hub 4-0:1.0: USB hub found
[ 22.276013] hub 4-0:1.0: 2 ports detected
[ 22.379558] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 22.379580] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 22.379589] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 22.379636] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 22.379681] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 22.379916] usb usb5: configuration #1 chosen from 1 choice
[ 22.379967] hub 5-0:1.0: USB hub found
[ 22.379979] hub 5-0:1.0: 2 ports detected
[ 22.483747] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.483810] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 22.483834] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[ 22.495425] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 22.496999] ata_piix 0000:00:1f.2: version 2.12
[ 22.497012] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 22.497051] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 22.497110] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 22.498761] scsi0 : ata_piix
[ 22.498921] scsi1 : ata_piix
[ 22.500808] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 22.500816] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 22.664857] ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
[ 22.664869] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
[ 22.679891] ata1.00: configured for UDMA/100
[ 22.881677] usb 1-7: configuration #1 chosen from 1 choice
[ 23.012698] ata2.01: ATAPI: Optiarc DVD RW AD-7530A, EX31, max UDMA/33
[ 23.127150] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 23.183669] ata2.01: configured for UDMA/33
[ 23.183951] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
[ 23.185428] scsi 1:0:1:0: CD-ROM Optiarc DVD RW AD-7530A EX31 PQ: 0 ANSI: 5
[ 23.208151] Driver 'sd' needs updating - please use bus_type methods
[ 23.208298] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 23.208326] sd 0:0:0:0: [sda] Write Protect is off
[ 23.208332] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.208372] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.208486] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 23.208510] sd 0:0:0:0: [sda] Write Protect is off
[ 23.208516] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 23.208554] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 23.208562] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 23.226251] sda1 sda2 < sda5 sda6 > sda3 sda4
[ 23.258599] sd 0:0:0:0: [sda] Attached SCSI disk
[ 23.271676] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 23.271687] Uniform CD-ROM driver Revision: 3.20
[ 23.271781] sr 1:0:1:0: Attached scsi CD-ROM sr0
[ 23.272671] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 23.272712] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 23.307434] usb 4-2: configuration #1 chosen from 1 choice
[ 23.435157] usbcore: registered new interface driver hiddev
[ 23.448524] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input2
[ 23.475148] input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.2-2
[ 23.475187] usbcore: registered new interface driver usbhid
[ 23.475195] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 23.590974] Clocksource tsc unstable (delta = -348198300 ns)
[ 23.594968] Time: hpet clocksource has been installed.
[ 23.608253] Attempting manual resume
[ 23.608261] swsusp: Resume From Partition 8:5
[ 23.608265] PM: Checking swsusp image.
[ 23.608535] PM: Resume from disk failed.
[ 23.656340] kjournald starting. Commit interval 5 seconds
[ 23.656373] EXT3-fs: mounted filesystem with ordered data mode.
[ 31.741115] Linux agpgart interface v0.102
[ 31.930605] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 31.994232] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.561811] iTCO_vendor_support: vendor-support=0
[ 32.585852] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 32.586062] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
[ 32.586083] iTCO_wdt: No card detected
[ 32.666074] input: Power Button (FF) as /devices/virtual/input/input3
[ 32.689687] ACPI: Power Button (FF) [PWRF]
[ 32.689892] input: Lid Switch as /devices/virtual/input/input4
[ 32.692167] ACPI: Lid Switch [LID0]
[ 32.692328] input: Sleep Button (CM) as /devices/virtual/input/input5
[ 32.709684] ACPI: Sleep Button (CM) [SLPB]
[ 32.769708] intel_rng: FWH not detected
[ 32.992878] ACPI: WMI-Acer: Mapper loaded
[ 33.790610] Yenta: CardBus bridge found at 0000:0a:06.0 [1025:0107]
[ 33.790648] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 33.790652] Yenta: Routing CardBus interrupts to PCI
[ 33.790662] Yenta TI: socket 0000:0a:06.0, mfunc 0x01aa1b22, devctl 0x64
[ 33.864235] nvidia: module license 'NVIDIA' taints kernel.
[ 34.241134] Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
[ 34.241143] Socket status: 30000006
[ 34.241149] Yenta: Raising subordinate bus# of parent bus (#0a) from #0a to #0e
[ 34.241158] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[ 34.473605] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6
[ 34.492004] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 34.492559] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 34.503992] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 34.614170] ACPI: PCI Interrupt 0000:0a:06.2[A] -> GSI 22 (level, low) -> IRQ 20
[ 34.648074] sdhci: Secure Digital Host Controller Interface driver
[ 34.648084] sdhci: Copyright(c) Pierre Ossman
[ 34.648166] sdhci: SDHCI controller found at 0000:0a:06.3 [104c:803c] (rev 0)
[ 34.648198] ACPI: PCI Interrupt 0000:0a:06.3[A] -> GSI 22 (level, low) -> IRQ 20
[ 34.648300] mmc0: SDHCI at 0xd2005800 irq 20 PIO
[ 35.314344] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
[ 35.314387] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 35.431656] ACPI: AC Adapter [ADP1] (on-line)
[ 35.471717] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 35.471738] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 35.471905] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 35.713218] ACPI: Battery Slot [BAT0] (battery present)
[ 36.551349] b43-phy0: Broadcom 4311 WLAN found
[ 36.703819] phy0: Selected rate control algorithm 'simple'
[ 36.735213] Linux video capture interface: v2.00
[ 36.848160] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 36.907296] uvcvideo: Found UVC 1.00 device USB2.0 Camera (5986:0100)
[ 36.988648] usbcore: registered new interface driver uvcvideo
[ 36.988659] USB Video Class driver (v0.1.0)
[ 37.394961] acer_acpi: Acer Laptop ACPI Extras version 0.11.1
[ 37.394975] acer_acpi: Detected Acer AMW0 version 2 interface
[ 37.400420] acer_acpi: Unable to detect mail LED
[ 37.592857] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
[ 37.623711] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input9
[ 39.297668] cs: IO port probe 0x100-0x3af: clean.
[ 39.300003] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 39.300996] cs: IO port probe 0x820-0x8ff: clean.
[ 39.301822] cs: IO port probe 0xc00-0xcf7: clean.
[ 39.302959] cs: IO port probe 0xa00-0xaff: clean.
[ 39.953084] lp: driver loaded but no devices found
[ 40.279465] Adding 1076312k swap on /dev/sda5. Priority:-1 extents:1 across:1076312k
[ 40.916318] EXT3 FS on sda6, internal journal
[ 42.702407] kjournald starting. Commit interval 5 seconds
[ 42.702696] EXT3 FS on sda3, internal journal
[ 42.702706] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.764096] kjournald starting. Commit interval 5 seconds
[ 42.764408] EXT3 FS on sda1, internal journal
[ 42.764418] EXT3-fs: mounted filesystem with ordered data mode.
[ 42.789572] kjournald starting. Commit interval 5 seconds
[ 42.789871] EXT3 FS on sda4, internal journal
[ 42.789881] EXT3-fs: mounted filesystem with ordered data mode.
[ 43.620125] ip_tables: (C) 2000-2006 Netfilter Core Team
