Re: [PATCH v5 17/17] serial: 8250: Add 8250_acpi driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, May 01, 2024 at 05:47:42PM +0530, Sunil V L wrote:
> RISC-V has non-PNP generic 16550A compatible UART which needs to be
> enumerated as ACPI platform device. Add driver support for such devices
> similar to 8250_of.
> 
> The driver is enabled when the CONFIG_SERIAL_ACPI_PLATFORM option is
> enabled. Enable this option for RISC-V.
> 
> Signed-off-by: Sunil V L <sunilvl@xxxxxxxxxxxxxxxx>
> ---
>  arch/riscv/configs/defconfig        |  1 +
>  drivers/tty/serial/8250/8250_acpi.c | 96 +++++++++++++++++++++++++++++
>  drivers/tty/serial/8250/Kconfig     |  8 +++
>  drivers/tty/serial/8250/Makefile    |  1 +
>  4 files changed, 106 insertions(+)
>  create mode 100644 drivers/tty/serial/8250/8250_acpi.c
> 
> diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
> index 3cae018f9315..bea8241f52eb 100644
> --- a/arch/riscv/configs/defconfig
> +++ b/arch/riscv/configs/defconfig
> @@ -150,6 +150,7 @@ CONFIG_SERIAL_8250=y
>  CONFIG_SERIAL_8250_CONSOLE=y
>  CONFIG_SERIAL_8250_DW=y
>  CONFIG_SERIAL_OF_PLATFORM=y
> +CONFIG_SERIAL_ACPI_PLATFORM=y
>  CONFIG_SERIAL_SH_SCI=y
>  CONFIG_SERIAL_EARLYCON_RISCV_SBI=y
>  CONFIG_VIRTIO_CONSOLE=y
> diff --git a/drivers/tty/serial/8250/8250_acpi.c b/drivers/tty/serial/8250/8250_acpi.c
> new file mode 100644
> index 000000000000..3682443bb69c
> --- /dev/null
> +++ b/drivers/tty/serial/8250/8250_acpi.c
> @@ -0,0 +1,96 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Serial Port driver for ACPI platform devices
> + *
> + * This driver is for generic 16550 compatible UART enumerated via ACPI
> + * platform bus instead of PNP bus like PNP0501. This is not a full
> + * driver but mostly provides the ACPI wrapper and uses generic
> + * 8250 framework for rest of the functionality.

No copyright line?  Odd, but ok, I'll take it, glad to see your company
finally realizes the lack of needing them :)


And as Andy said, please use the existing driver and extend what you
need, don't write a new one, we really don't need a new one.

> +static int acpi_platform_serial_probe(struct platform_device *pdev)
> +{
> +	struct acpi_serial_info *data;
> +	struct uart_8250_port port8250;
> +	struct device *dev = &pdev->dev;
> +	struct resource *regs;
> +
> +	int ret, irq;
> +
> +	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	if (!regs) {
> +		dev_err(dev, "no registers defined\n");
> +		return -EINVAL;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	memset(&port8250, 0, sizeof(port8250));
> +
> +	spin_lock_init(&port8250.port.lock);

Are you sure this works?

thanks,

greg k-h




[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux