On Mon, Mar 18, 2024 at 07:27:34PM -0700, Drew Fustini wrote: > On Mon, Mar 18, 2024 at 11:40:34AM -0700, Drew Fustini wrote: > > On Thu, Feb 08, 2024 at 09:14:11AM +0530, Sunil V L wrote: > > > This series enables the support for "Collaborative Processor Performance > > > Control (CPPC) on ACPI based RISC-V platforms. It depends on the > > > encoding of CPPC registers as defined in RISC-V FFH spec [2]. > > > > > > CPPC is described in the ACPI spec [1]. RISC-V FFH spec required to > > > enable this, is available at [2]. > > > > > > [1] - https://uefi.org/specs/ACPI/6.5/08_Processor_Configuration_and_Control.html#collaborative-processor-performance-control > > > [2] - https://github.com/riscv-non-isa/riscv-acpi-ffh/releases/download/v1.0.0/riscv-ffh.pdf > > > > > > The series is based on the LPI support series. > > > Based-on: 20240118062930.245937-1-sunilvl@xxxxxxxxxxxxxxxx > > > (https://lore.kernel.org/lkml/20240118062930.245937-1-sunilvl@xxxxxxxxxxxxxxxx/) > > > > Should the https://github.com/vlsunil/qemu/tree/lpi_exp branch also be > > used for this CPPC series too? > > I noticed the ventanamicro qemu repo has a dev-upstream branch [1] which > contains 4bb6ba4d0fb9 ("riscv/virt: acpi: Enable CPPC - _CPC and _PSD"). > I've built that but I still see 'SBI CPPC extension NOT detected!!' in > the Linux boot log. > > I'm using upstream opensbi. It seems that sbi_cppc_probe() fails because > cppc_dev is not set. Nothing in the upstream opensbi repo seems to call > sbi_cppc_set_device(), so I am uncertain how it is possible for it to > work. Is there an opensbi branch I should be using? > > Thanks, > Drew > > [1] https://github.com/ventanamicro/qemu/tree/dev-upstream Please use below branches for qemu and opensbi. These are just dummy objects/interfaces added to test the kernel change which are otherwise platform specific features. https://github.com/vlsunil/qemu/tree/lpi_cppc_exp https://github.com/vlsunil/opensbi/tree/cppc_exp Regards Sunil
