On Tue, Dec 19, 2023 at 06:50:19PM +0100, Rafael J. Wysocki wrote: > On Tue, Dec 19, 2023 at 6:45 PM Sunil V L <sunilvl@xxxxxxxxxxxxxxxx> wrote: > > > > This series adds support for the below ECR approved by ASWG. > > 1) MADT - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing > > > > The series primarily enables irqchip drivers for RISC-V ACPI based > > platforms. > > > > The series can be broadly categorized like below. > > > > 1) PCI ACPI related functions are migrated from arm64 to common file so > > that we don't need to duplicate them for RISC-V. > > > > 2) Introduced support for fw_devlink for ACPI nodes for IRQ dependency. > > This helps to support deferred probe of interrupt controller drivers. > > > > 3) Modified pnp_irq() to try registering the IRQ again if it sees it in > > disabled state. This solution is similar to how > > platform_get_irq_optional() works for regular platform devices. > > > > 4) Added support for re-ordering the probe of interrupt controllers when > > IRQCHIP_ACPI_DECLARE is used. > > > > 5) ACPI support added in RISC-V interrupt controller drivers. > > > > This series is based on Anup's AIA v11 series. Since Anup's AIA v11 is > > not merged yet and first time introducing fw_devlink, deferred probe and > > reordering support for IRQCHIP probe, this series is still kept as RFC. > > Looking forward for the feedback! > > > > Changes since RFC v2: > > 1) Introduced fw_devlink for ACPI nodes for IRQ dependency. > > 2) Dropped patches in drivers which are not required due to > > fw_devlink support. > > 3) Dropped pci_set_msi() patch and added a patch in > > pci_create_root_bus(). > > 4) Updated pnp_irq() patch so that none of the actual PNP > > drivers need to change. > > > > Changes since RFC v1: > > 1) Abandoned swnode approach as per Marc's feedback. > > 2) To cope up with AIA series changes which changed irqchip driver > > probe from core_initcall() to platform_driver, added patches > > to support deferred probing. > > 3) Rebased on top of Anup's AIA v11 and added tags. > > > > To test the series, > > > > 1) Qemu should be built using the riscv_acpi_b2_v8 branch at > > https://github.com/vlsunil/qemu.git > > > > 2) EDK2 should be built using the instructions at: > > https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md > > > > 3) Build Linux using this series on top of Anup's AIA v11 series. > > > > Run Qemu: > > qemu-system-riscv64 \ > > -M virt,pflash0=pflash0,pflash1=pflash1,aia=aplic-imsic \ > > -m 2G -smp 8 \ > > -serial mon:stdio \ > > -device virtio-gpu-pci -full-screen \ > > -device qemu-xhci \ > > -device usb-kbd \ > > -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \ > > -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \ > > -netdev user,id=net0 -device virtio-net-pci,netdev=net0 \ > > -kernel arch/riscv/boot/Image \ > > -initrd rootfs.cpio \ > > -append "root=/dev/ram ro console=ttyS0 rootwait earlycon=uart8250,mmio,0x10000000" > > > > To boot with APLIC only, use aia=aplic. > > To boot with PLIC, remove aia= option. > > > > This series is also available in acpi_b2_v3_riscv_aia_v11 branch at > > https://github.com/vlsunil/linux.git > > > > Based-on: 20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx > > (https://lore.kernel.org/lkml/20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx/) > > > > Sunil V L (17): > > arm64: PCI: Migrate ACPI related functions to pci-acpi.c > > RISC-V: ACPI: Implement PCI related functionality > > PCI: Make pci_create_root_bus() declare its reliance on MSI domains > > ACPI: Add fw_devlink support for ACPI fwnode for IRQ dependency > > ACPI: irq: Add support for deferred probe in acpi_register_gsi() > > pnp.h: Reconfigure IRQ in pnp_irq() to support deferred probe > > ACPI: scan.c: Add weak arch specific function to reorder the IRQCHIP > > probe > > ACPI: RISC-V: Implement arch function to reorder irqchip probe entries > > irqchip: riscv-intc: Add ACPI support for AIA > > irqchip: riscv-imsic: Add ACPI support > > irqchip: riscv-aplic: Add ACPI support > > irqchip: irq-sifive-plic: Add ACPI support > > ACPI: bus: Add RINTC IRQ model for RISC-V > > ACPI: bus: Add acpi_riscv_init function > > ACPI: RISC-V: Create APLIC platform device > > ACPI: RISC-V: Create PLIC platform device > > irqchip: riscv-intc: Set ACPI irqmodel > > JFYI, I have no capacity to provide any feedback on this till 6.8-rc1 is out. > No worries!. I will wait for your feedback. Thanks! Sunil
