Re: [RFC PATCH v3 00/17] RISC-V: ACPI: Add external interrupt controller support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 19, 2023 at 6:45 PM Sunil V L <sunilvl@xxxxxxxxxxxxxxxx> wrote:
>
> This series adds support for the below ECR approved by ASWG.
> 1) MADT - https://drive.google.com/file/d/1oMGPyOD58JaPgMl1pKasT-VKsIKia7zR/view?usp=sharing
>
> The series primarily enables irqchip drivers for RISC-V ACPI based
> platforms.
>
> The series can be broadly categorized like below.
>
> 1) PCI ACPI related functions are migrated from arm64 to common file so
> that we don't need to duplicate them for RISC-V.
>
> 2) Introduced support for fw_devlink for ACPI nodes for IRQ dependency.
> This helps to support deferred probe of interrupt controller drivers.
>
> 3) Modified pnp_irq() to try registering the IRQ  again if it sees it in
> disabled state. This solution is similar to how
> platform_get_irq_optional() works for regular platform devices.
>
> 4) Added support for re-ordering the probe of interrupt controllers when
> IRQCHIP_ACPI_DECLARE is used.
>
> 5) ACPI support added in RISC-V interrupt controller drivers.
>
> This series is based on Anup's AIA v11 series. Since Anup's AIA v11 is
> not merged yet and first time introducing fw_devlink, deferred probe and
> reordering support for IRQCHIP probe, this series is still kept as RFC.
> Looking forward for the feedback!
>
> Changes since RFC v2:
>         1) Introduced fw_devlink for ACPI nodes for IRQ dependency.
>         2) Dropped patches in drivers which are not required due to
>            fw_devlink support.
>         3) Dropped pci_set_msi() patch and added a patch in
>            pci_create_root_bus().
>         4) Updated pnp_irq() patch so that none of the actual PNP
>            drivers need to change.
>
> Changes since RFC v1:
>         1) Abandoned swnode approach as per Marc's feedback.
>         2) To cope up with AIA series changes which changed irqchip driver
>            probe from core_initcall() to platform_driver, added patches
>            to support deferred probing.
>         3) Rebased on top of Anup's AIA v11 and added tags.
>
> To test the series,
>
> 1) Qemu should be built using the riscv_acpi_b2_v8 branch at
> https://github.com/vlsunil/qemu.git
>
> 2) EDK2 should be built using the instructions at:
> https://github.com/tianocore/edk2/blob/master/OvmfPkg/RiscVVirt/README.md
>
> 3) Build Linux using this series on top of Anup's AIA v11 series.
>
> Run Qemu:
> qemu-system-riscv64 \
>  -M virt,pflash0=pflash0,pflash1=pflash1,aia=aplic-imsic \
>  -m 2G -smp 8 \
>  -serial mon:stdio \
>  -device virtio-gpu-pci -full-screen \
>  -device qemu-xhci \
>  -device usb-kbd \
>  -blockdev node-name=pflash0,driver=file,read-only=on,filename=RISCV_VIRT_CODE.fd \
>  -blockdev node-name=pflash1,driver=file,filename=RISCV_VIRT_VARS.fd \
>  -netdev user,id=net0 -device virtio-net-pci,netdev=net0 \
>  -kernel arch/riscv/boot/Image \
>  -initrd rootfs.cpio \
>  -append "root=/dev/ram ro console=ttyS0 rootwait earlycon=uart8250,mmio,0x10000000"
>
> To boot with APLIC only, use aia=aplic.
> To boot with PLIC, remove aia= option.
>
> This series is also available in acpi_b2_v3_riscv_aia_v11 branch at
> https://github.com/vlsunil/linux.git
>
> Based-on: 20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx
> (https://lore.kernel.org/lkml/20231023172800.315343-1-apatel@xxxxxxxxxxxxxxxx/)
>
> Sunil V L (17):
>   arm64: PCI: Migrate ACPI related functions to pci-acpi.c
>   RISC-V: ACPI: Implement PCI related functionality
>   PCI: Make pci_create_root_bus() declare its reliance on MSI domains
>   ACPI: Add fw_devlink support for ACPI fwnode for IRQ dependency
>   ACPI: irq: Add support for deferred probe in acpi_register_gsi()
>   pnp.h: Reconfigure IRQ in pnp_irq() to support deferred probe
>   ACPI: scan.c: Add weak arch specific function to reorder the IRQCHIP
>     probe
>   ACPI: RISC-V: Implement arch function to reorder irqchip probe entries
>   irqchip: riscv-intc: Add ACPI support for AIA
>   irqchip: riscv-imsic: Add ACPI support
>   irqchip: riscv-aplic: Add ACPI support
>   irqchip: irq-sifive-plic: Add ACPI support
>   ACPI: bus: Add RINTC IRQ model for RISC-V
>   ACPI: bus: Add acpi_riscv_init function
>   ACPI: RISC-V: Create APLIC platform device
>   ACPI: RISC-V: Create PLIC platform device
>   irqchip: riscv-intc: Set ACPI irqmodel

JFYI, I have no capacity to provide any feedback on this till 6.8-rc1 is out.

Thanks!





[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux