Hi, I downloaded pmtools from http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/pmtools-20071116.tar.bz2 and compiled: it created exactly the same result what my currently installed acpidump Debian package version 20071116-1. I think it is useless to send the same log again. After I boot the "Please send acpidump to linux-acpi@xxxxxxxxxxxxxxx" message is already there. So when I first get the prompt I checked for this message in dmesg and executed the given command. Here is my result: # cat /proc/acpi/thermal_zone/*/* 0 - Active; 1 - Passive <polling disabled> state: ok temperature: 42 C critical (S5): 155 C passive: 84 C: tc1=2 tc2=5 tsp=0 devices=CPU0 active[0]: 70 C: devices= # ls /proc/acpi/thermal_zone/*/* /proc/acpi/thermal_zone/THRM/cooling_mode /proc/acpi/thermal_zone/THRM/polling_frequency /proc/acpi/thermal_zone/THRM/state /proc/acpi/thermal_zone/THRM/temperature /proc/acpi/thermal_zone/THRM/trip_points Maybe this is related to http://bugzilla.kernel.org/show_bug.cgi?id=8544 ? Márton Németh Zhang, Rui wrote: > Please attach the result of "cat /proc/acpi/thermal_zone/*/*" after this message is shown. > > Thanks, > rui > >> -----Original Message----- >> From: linux-acpi-owner@xxxxxxxxxxxxxxx >> [mailto:linux-acpi-owner@xxxxxxxxxxxxxxx] On Behalf Of Zhang, Rui >> Sent: Thursday, March 06, 2008 6:50 AM >> To: Németh Márton >> Cc: linux-acpi@xxxxxxxxxxxxxxx; LKML >> Subject: Re: AE_ERROR, ACPI thermal trip point state changed >> >> hi, Márton, >> >> Please re-send the acpidump using the latest pmtools at >> http://www.kernel.org/pub/linux/kernel/people/lenb/acpi/utils/ >> >> thanks, >> rui >> >> On Thu, 2008-03-06 at 08:01 +0100, Németh Márton wrote: >>> Hi, >>> >>> in my dmesg the following lines appear with linux-2.6.25-rc4 on Clevo D410J >> laptop: >>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >>> Please send acpidump to linux-acpi@xxxxxxxxxxxxxxx >>> [20070126] >>> >>> Should I do something else than sending the acpidump? >>> >>> Márton Németh >>> >>> >>> Németh Márton wrote: >>>> Hi, >>>> >>>> I get the following message from the kernel 2.6.25-rc1 on Clevo D410J laptop: >>>> >>>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state >> changed >>>> Please send acpidump to linux-acpi@xxxxxxxxxxxxxxx >>>> [20070126] >>>> >>>> So I am writing this email to you. >>>> >>>> Márton Németh >>> plain text document attachment (dmesg-2.6.25-rc4.txt) >>> Linux version 2.6.25-rc4 (nmarci@europa) (gcc version 4.2.3 20080114 >> (prerelease) (Debian 4.2.2-7)) #1 PREEMPT Wed Mar 5 21:34:08 CET 2008 >>> BIOS-provided physical RAM map: >>> BIOS-e820: 0000000000000000 - 000000000009f800 (usable) >>> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) >>> BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved) >>> BIOS-e820: 0000000000100000 - 000000003bf70000 (usable) >>> BIOS-e820: 000000003bf70000 - 000000003bf7a000 (ACPI data) >>> BIOS-e820: 000000003bf7a000 - 000000003bf80000 (ACPI NVS) >>> BIOS-e820: 000000003bf80000 - 0000000040000000 (reserved) >>> BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved) >>> 63MB HIGHMEM available. >>> 896MB LOWMEM available. >>> Scan SMP from c0000000 for 1024 bytes. >>> Scan SMP from c009fc00 for 1024 bytes. >>> Scan SMP from c00f0000 for 65536 bytes. >>> found SMP MP-table at [c00f6870] 000f6870 >>> Entering add_active_range(0, 0, 245616) 0 entries of 256 used >>> Zone PFN ranges: >>> DMA 0 -> 4096 >>> Normal 4096 -> 229376 >>> HighMem 229376 -> 245616 >>> Movable zone start PFN for each node >>> early_node_map[1] active PFN ranges >>> 0: 0 -> 245616 >>> On node 0 totalpages: 245616 >>> DMA zone: 32 pages used for memmap >>> DMA zone: 0 pages reserved >>> DMA zone: 4064 pages, LIFO batch:0 >>> Normal zone: 1760 pages used for memmap >>> Normal zone: 223520 pages, LIFO batch:31 >>> HighMem zone: 126 pages used for memmap >>> HighMem zone: 16114 pages, LIFO batch:3 >>> Movable zone: 0 pages used for memmap >>> DMI present. >>> ACPI: RSDP 000F68D0, 0014 (r0 PTLTD ) >>> ACPI: RSDT 3BF7600B, 0030 (r1 PTLTD RSDT 6040000 LTP 0) >>> ACPI: FACP 3BF79E87, 0074 (r1 AMDK8 PTLTW 6040000 PTL_ F4240) >>> ACPI: DSDT 3BF7603B, 3E4C (r1 VIA PTL_ACPI 6040000 MSFT 100000E) >>> ACPI: FACS 3BF7AFC0, 0040 >>> ACPI: SSDT 3BF79EFB, 00B5 (r1 PTLTD POWERNOW 6040000 LTP 1) >>> ACPI: APIC 3BF79FB0, 0050 (r1 PTLTD APIC 6040000 LTP 0) >>> ACPI: PM-Timer IO Port: 0x4008 >>> ACPI: Local APIC address 0xfee00000 >>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>> Processor #0 15:12 APIC version 16 >>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) >>> IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 >>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >>> ACPI: IRQ0 used by override. >>> ACPI: IRQ2 used by override. >>> ACPI: IRQ10 used by override. >>> Enabling APIC mode: Flat. Using 1 I/O APICs >>> Using ACPI (MADT) for SMP configuration information >>> Allocating PCI resources starting at 50000000 (gap: 40000000:bffe0000) >>> PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 >>> PM: Registered nosave memory: 00000000000a0000 - 00000000000d8000 >>> PM: Registered nosave memory: 00000000000d8000 - 0000000000100000 >>> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 243698 >>> Kernel command line: root=/dev/hda3 ro log_buf_len=1M resume=/dev/hda2 >>> log_buf_len: 1048576 >>> mapped APIC to ffffb000 (fee00000) >>> mapped IOAPIC to ffffa000 (fec00000) >>> Enabling fast FPU save and restore... done. >>> Enabling unmasked SIMD FPU exception support... done. >>> Initializing CPU#0 >>> PID hash table entries: 4096 (order: 12, 16384 bytes) >>> Detected 1603.695 MHz processor. >>> Console: colour VGA+ 80x25 >>> console [tty0] enabled >>> Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar >>> ... MAX_LOCKDEP_SUBCLASSES: 8 >>> ... MAX_LOCK_DEPTH: 48 >>> ... MAX_LOCKDEP_KEYS: 2048 >>> ... CLASSHASH_SIZE: 1024 >>> ... MAX_LOCKDEP_ENTRIES: 8192 >>> ... MAX_LOCKDEP_CHAINS: 16384 >>> ... CHAINHASH_SIZE: 8192 >>> memory used by lock dependency info: 992 kB >>> per task-struct memory footprint: 1920 bytes >>> ------------------------ >>> | Locking API testsuite: >>> >> --------------------------------------------------------------------------- >> - >>> | spin |wlock |rlock |mutex | wsem | rsem >> | >> -------------------------------------------------------------------------- >>> A-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok >> | >>> double unlock: ok | ok | ok | ok | ok | ok >> | >>> initialize held: ok | ok | ok | ok | ok | ok >> | >>> bad unlock order: ok | ok | ok | ok | ok | ok >> | >> -------------------------------------------------------------------------- >>> recursive read-lock: | ok | | ok >> | >>> recursive read-lock #2: | ok | | ok >> | >>> mixed read-write-lock: | ok | | ok >> | >>> mixed write-read-lock: | ok | | ok >> | >> -------------------------------------------------------------------------- >>> hard-irqs-on + irq-safe-A/12: ok | ok | ok | >>> soft-irqs-on + irq-safe-A/12: ok | ok | ok | >>> hard-irqs-on + irq-safe-A/21: ok | ok | ok | >>> soft-irqs-on + irq-safe-A/21: ok | ok | ok | >>> sirq-safe-A => hirqs-on/12: ok | ok | ok | >>> sirq-safe-A => hirqs-on/21: ok | ok | ok | >>> hard-safe-A + irqs-on/12: ok | ok | ok | >>> soft-safe-A + irqs-on/12: ok | ok | ok | >>> hard-safe-A + irqs-on/21: ok | ok | ok | >>> soft-safe-A + irqs-on/21: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/123: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/123: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/132: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/132: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/213: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/213: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/231: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/231: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/312: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/312: ok | ok | ok | >>> hard-safe-A + unsafe-B #1/321: ok | ok | ok | >>> soft-safe-A + unsafe-B #1/321: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/123: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/123: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/132: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/132: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/213: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/213: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/231: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/231: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/312: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/312: ok | ok | ok | >>> hard-safe-A + unsafe-B #2/321: ok | ok | ok | >>> soft-safe-A + unsafe-B #2/321: ok | ok | ok | >>> hard-irq lock-inversion/123: ok | ok | ok | >>> soft-irq lock-inversion/123: ok | ok | ok | >>> hard-irq lock-inversion/132: ok | ok | ok | >>> soft-irq lock-inversion/132: ok | ok | ok | >>> hard-irq lock-inversion/213: ok | ok | ok | >>> soft-irq lock-inversion/213: ok | ok | ok | >>> hard-irq lock-inversion/231: ok | ok | ok | >>> soft-irq lock-inversion/231: ok | ok | ok | >>> hard-irq lock-inversion/312: ok | ok | ok | >>> soft-irq lock-inversion/312: ok | ok | ok | >>> hard-irq lock-inversion/321: ok | ok | ok | >>> soft-irq lock-inversion/321: ok | ok | ok | >>> hard-irq read-recursion/123: ok | >>> soft-irq read-recursion/123: ok | >>> hard-irq read-recursion/132: ok | >>> soft-irq read-recursion/132: ok | >>> hard-irq read-recursion/213: ok | >>> soft-irq read-recursion/213: ok | >>> hard-irq read-recursion/231: ok | >>> soft-irq read-recursion/231: ok | >>> hard-irq read-recursion/312: ok | >>> soft-irq read-recursion/312: ok | >>> hard-irq read-recursion/321: ok | >>> soft-irq read-recursion/321: ok | >>> ------------------------------------------------------- >>> Good, all 218 testcases passed! | >>> --------------------------------- >>> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) >>> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) >>> Memory: 966876k/982464k available (2071k kernel code, 15072k reserved, 891k >> data, 272k init, 64960k highmem) >>> virtual kernel memory layout: >>> fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB) >>> pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>> vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) >>> lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) >>> .init : 0xc03e8000 - 0xc042c000 ( 272 kB) >>> .data : 0xc0305c2b - 0xc03e4c18 ( 891 kB) >>> .text : 0xc0100000 - 0xc0305c2b (2071 kB) >>> Checking if this processor honours the WP bit even in supervisor mode...Ok. >>> CPA: page pool initialized 1 of 1 pages preallocated >>> Calibrating delay using timer specific routine.. 3210.53 BogoMIPS >> (lpj=1605269) >>> Mount-cache hash table entries: 512 >>> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) >>> CPU: L2 Cache: 128K (64 bytes/line) >>> Intel machine check architecture supported. >>> Intel machine check reporting enabled on CPU#0. >>> Compat vDSO mapped to ffffe000. >>> CPU: AMD Mobile AMD Sempron(tm) Processor 2600+ stepping 00 >>> Checking 'hlt' instruction... OK. >>> Freeing SMP alternatives: 0k freed >>> ACPI: Core revision 20070126 >>> Parsing all Control Methods: >>> Table [DSDT](id 0001) - 480 Objects with 49 Devices 147 Methods 13 Regions >>> Parsing all Control Methods: >>> Table [SSDT](id 0002) - 3 Objects with 0 Devices 0 Methods 0 Regions >>> tbxface-0598 [00] tb_load_namespace : ACPI Tables successfully acquired >>> evxfevnt-0091 [00] enable : Transition to ACPI mode successful >>> ENABLING IO-APIC IRQs >>> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 >>> net_namespace: 604 bytes >>> NET: Registered protocol family 16 >>> EISA bus registered >>> ACPI: bus type pci registered >>> PCI: PCI BIOS revision 2.10 entry at 0xfd88c, last bus=1 >>> PCI: Using configuration type 1 >>> Setting up standard PCI resources >>> evgpeblk-0956 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int >> 0xA >>> evgpeblk-1052 [00] ev_initialize_gpe_bloc: Found 4 Wake, Enabled 0 Runtime >> GPEs in this block >>> ACPI: EC: Look up EC in DSDT >>> Completing Region/Field/Buffer/Package >> initialization:..................................................... >>> Initialized 11/13 Regions 1/1 Fields 23/24 Buffers 18/26 Packages (492 nodes) >>> Initializing Device/Processor/Thermal objects by executing _INI methods:. >>> Executed 1 _INI methods requiring 1 _STA executions (examined 53 objects) >>> ACPI: Interpreter enabled >>> ACPI: (supports S0 S3 S4 S5) >>> ACPI: Using IOAPIC for interrupt routing >>> ACPI: EC: non-query interrupt received, switching to interrupt mode >>> ACPI: EC: missing write data confirmation, don't expect it any longer. >>> ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62 >>> ACPI: EC: driver started in interrupt mode >>> ACPI: PCI Root Bridge [PCI0] (0000:00) >>> pci 0000:00:11.0: quirk: region 4000-407f claimed by vt8235 PM >>> pci 0000:00:11.0: quirk: region 8100-810f claimed by vt8235 SMB >>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled. >>> ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *11, disabled. >>> ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *10, disabled. >>> ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *5, disabled. >>> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 12 14 15) >>> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 12 14 15) *11 >>> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11 12 14 15) *10 >>> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 9 10 11 12 14 15) >>> Linux Plug and Play Support v0.97 (c) Adam Belay >>> pnp: PnP ACPI init >>> ACPI: bus type pnp registered >>> pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) >>> pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) >>> pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active) >>> pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) >>> pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) >>> 00:05: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >>> pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) >>> 00:06: calling quirk 0xc025ae70: quirk_supermicro_h8dce_system+0x0/0x110() >>> pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) >>> pnp 00:07: Plug and Play ACPI device, IDs PNP0f13 (active) >>> pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) >>> pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) >>> pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active) >>> pnp: PnP ACPI: found 11 devices >>> ACPI: ACPI bus type pnp unregistered >>> PCI: Using ACPI for IRQ routing >>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report >>> pnp: the driver 'system' has been registered >>> system 00:05: iomem range 0x0-0x9ffff could not be reserved >>> system 00:05: iomem range 0xe0000-0xfffff could not be reserved >>> system 00:05: iomem range 0xfff00000-0xffffffff could not be reserved >>> system 00:05: iomem range 0xffee0000-0xffefffff has been reserved >>> system 00:05: iomem range 0xfec00000-0xfec00fff has been reserved >>> system 00:05: iomem range 0xfee00000-0xfee00fff has been reserved >>> system 00:05: driver attached >>> system 00:06: ioport range 0x4d0-0x4d1 has been reserved >>> system 00:06: ioport range 0xfe10-0xfe11 has been reserved >>> system 00:06: ioport range 0xfe00-0xfe00 has been reserved >>> system 00:06: ioport range 0x4000-0x407f has been reserved >>> system 00:06: ioport range 0x8100-0x811f could not be reserved >>> Time: tsc clocksource has been installed. >>> system 00:06: driver attached >>> PCI: Bridge: 0000:00:01.0 >>> IO window: disabled. >>> MEM window: 0xd1000000-0xd1ffffff >>> PREFETCH window: 0x00000000f0000000-0x00000000f3ffffff >>> PCI: Bus 2, cardbus bridge: 0000:00:0c.0 >>> IO window: 0x00002000-0x000020ff >>> IO window: 0x00002400-0x000024ff >>> PREFETCH window: 0x50000000-0x53ffffff >>> MEM window: 0x54000000-0x57ffffff >>> PCI: Setting latency timer of device 0000:00:01.0 to 64 >>> PCI: Enabling device 0000:00:0c.0 (0000 -> 0003) >>> ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 16 >>> PCI: Setting latency timer of device 0000:00:0c.0 to 64 >>> NET: Registered protocol family 2 >>> IP route cache hash table entries: 32768 (order: 5, 131072 bytes) >>> TCP established hash table entries: 131072 (order: 8, 1048576 bytes) >>> TCP bind hash table entries: 65536 (order: 9, 2097152 bytes) >>> TCP: Hash tables configured (established 131072 bind 65536) >>> TCP reno registered >>> audit: initializing netlink socket (disabled) >>> type=2000 audit(1204788516.711:1): initialized >>> highmem bounce pool size: 64 pages >>> io scheduler noop registered >>> io scheduler cfq registered (default) >>> PCI: VIA PCI bridge detected. Disabling DAC. >>> pci 0000:01:00.0: Boot video device >>> isapnp: Scanning for PnP cards... >>> isapnp: No Plug & Play device found >>> Uniform Multi-Platform E-IDE driver >>> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx >>> VP_IDE: IDE controller (0x1106:0x0571 rev 0x06) at PCI slot 0000:00:11.1 >>> ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 23 >>> ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 23 >>> ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [ALKA] -> GSI 23 (level, low) -> >> IRQ 23 >>> VP_IDE: not 100% native mode: will probe irqs later >>> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 >>> ide0: BM-DMA at 0x1c60-0x1c67, BIOS settings: hda:DMA, hdb:PIO >>> ide1: BM-DMA at 0x1c68-0x1c6f, BIOS settings: hdc:DMA, hdd:PIO >>> Probing IDE interface ide0... >>> Switched to high resolution mode on CPU 0 >>> hdb: IRQ probe failed (0xfffffbfe) >>> hdb: IRQ probe failed (0xfffffbfe) >>> hda: SAMSUNG MP0804H, ATA DISK drive >>> hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hda: UDMA/100 mode selected >>> Probing IDE interface ide1... >>> hdc: Optiarc DVD RW AD-7543A, ATAPI CD/DVD-ROM drive >>> hdc: host max PIO5 wanted PIO255(auto-tune) selected PIO4 >>> hdc: UDMA/33 mode selected >>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 >>> ide1 at 0x170-0x177,0x376 on irq 15 >>> pnp: the driver 'ide' has been registered >>> hda: max request size: 512KiB >>> hda: 156368016 sectors (80060 MB) w/8192KiB Cache, CHS=16383/255/63 >>> hda: cache flushes supported >>> hda: hda1 hda2 hda3 >>> TCP cubic registered >>> NET: Registered protocol family 1 >>> NET: Registered protocol family 17 >>> Using IPI Shortcut mode >>> ReiserFS: hda3: found reiserfs format "3.6" with standard journal >>> ReiserFS: hda3: using ordered data mode >>> ReiserFS: hda3: journal params: device hda3, size 8192, journal first block >> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>> ReiserFS: hda3: checking transaction log (hda3) >>> ReiserFS: hda3: Using r5 hash to sort names >>> VFS: Mounted root (reiserfs filesystem) readonly. >>> Freeing unused kernel memory: 272k freed >>> Write protecting the kernel read-only data: 732k >>> ACPI: CPU0 (power states: C1[C1] C2[C2]) >>> ACPI: ACPI0007:00 is registered as cooling_device0 >>> input: Power Button (FF) as /class/input/input0 >>> ACPI: Power Button (FF) [PWRF] >>> input: Power Button (CM) as /class/input/input1 >>> ACPI: Power Button (CM) [PWB] >>> input: Sleep Button (CM) as /class/input/input2 >>> ACPI: Sleep Button (CM) [SLPB] >>> input: Lid Switch as /class/input/input3 >>> ACPI: Lid Switch [LID] >>> ACPI: LNXTHERM:01 is registered as thermal_zone0 >>> ACPI: Thermal Zone [THRM] (14 C) >>> ACPI: AC Adapter [AC] (on-line) >>> ACPI: Battery Slot [BAT0] (battery present) >>> Yenta: CardBus bridge found at 0000:00:0c.0 [1558:4702] >>> Yenta: Using CSCINT to route CSC interrupts to PCI >>> Yenta: Routing CardBus interrupts to PCI >>> Yenta TI: socket 0000:00:0c.0, mfunc 0x00001002, devctl 0x44 >>> 8139too Fast Ethernet driver 0.9.28 >>> hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache >>> Uniform CD-ROM driver Revision: 3.20 >>> Yenta: ISA IRQ mask 0x0840, PCI irq 16 >>> Socket status: 30000006 >>> ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 19 (level, low) -> IRQ 19 >>> eth0: RealTek RTL8139 at 0xf88fa000, 00:90:f5:3e:5a:ca, IRQ 19 >>> eth0: Identified 8139 chip type 'RTL-8100B/8139D' >>> Marking TSC unstable due to: possible TSC halt in C2. >>> Time: acpi_pm clocksource has been installed. >>> usbcore: registered new interface driver usbfs >>> usbcore: registered new interface driver hub >>> usbcore: registered new device driver usb >>> input: PC Speaker as /class/input/input4 >>> pnp: the driver 'parport_pc' has been registered >>> parport_pc 00:0a: reported by Plug and Play ACPI >>> parport0: PC-style at 0x378 (0x778), irq 7, dma 1 >> [PCSPP,TRISTATE,COMPAT,ECP,DMA] >>> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled >>> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> Real Time Clock Driver v1.12ac >>> parport_pc 00:0a: driver attached >>> USB Universal Host Controller Interface driver v3.0 >>> ACPI: PCI Interrupt Link [ALKD] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 21 >>> ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 21 >>> ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.0: UHCI Host Controller >>> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 >>> uhci_hcd 0000:00:10.0: irq 21, io base 0x00001c00 >>> usb usb1: configuration #1 chosen from 1 choice >>> hub 1-0:1.0: USB hub found >>> hub 1-0:1.0: 2 ports detected >>> ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.1: UHCI Host Controller >>> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 >>> uhci_hcd 0000:00:10.1: irq 21, io base 0x00001c20 >>> usb usb2: configuration #1 chosen from 1 choice >>> hub 2-0:1.0: USB hub found >>> hub 2-0:1.0: 2 ports detected >>> ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> uhci_hcd 0000:00:10.2: UHCI Host Controller >>> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 >>> uhci_hcd 0000:00:10.2: irq 21, io base 0x00001c40 >>> usb usb3: configuration #1 chosen from 1 choice >>> hub 3-0:1.0: USB hub found >>> hub 3-0:1.0: 2 ports detected >>> pnp: the driver 'serial' has been registered >>> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A >>> serial 00:09: driver attached >>> ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [ALKD] -> GSI 21 (level, low) -> >> IRQ 21 >>> ehci_hcd 0000:00:10.3: EHCI Host Controller >>> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 >>> ehci_hcd 0000:00:10.3: irq 21, io mem 0xd0004400 >>> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 >>> usb usb4: configuration #1 chosen from 1 choice >>> hub 4-0:1.0: USB hub found >>> hub 4-0:1.0: 6 ports detected >>> cs: IO port probe 0x100-0x4ff: clean. >>> cs: IO port probe 0x800-0x8ff: clean. >>> cs: IO port probe 0xc00-0xcff: clean. >>> cs: IO port probe 0xa00-0xaff: clean. >>> ACPI: PCI Interrupt Link [ALKC] disabled and referenced, BIOS bug >>> ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 >>> ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 >>> ACPI: PCI Interrupt 0000:00:11.6[C] -> Link [ALKC] -> GSI 22 (level, low) -> >> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:11.6 to 64 >>> ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> >> IRQ 22 >>> PCI: Setting latency timer of device 0000:00:11.5 to 64 >>> Adding 1951888k swap on /dev/hda2. Priority:-1 extents:1 across:1951888k >>> pnp: the driver 'i8042 kbd' has been registered >>> i8042 kbd 00:08: driver attached >>> pnp: the driver 'i8042 aux' has been registered >>> i8042 aux 00:07: driver attached >>> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 >>> i8042.c: Detected active multiplexing controller, rev 1.1. >>> serio: i8042 KBD port at 0x60,0x64 irq 1 >>> serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>> serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>> input: AT Translated Set 2 keyboard as /class/input/input5 >>> powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 2600+ processors (1 cpu >> cores) (version 2.20.00) >>> powernow-k8: 0 : fid 0x8 (1600 MHz), vid 0x6 >>> powernow-k8: 1 : fid 0x0 (800 MHz), vid 0x18 >>> powernow-k8: ph2 null fid transition 0x8 >>> input: PS/2 Mouse as /class/input/input6 >>> input: AlpsPS/2 ALPS GlidePoint as /class/input/input7 >>> mice: PS/2 mouse device common for all mice >>> Linux agpgart interface v0.103 >>> [drm] Initialized drm 1.1.0 20060810 >>> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 >>> [drm] Initialized via 2.11.1 20070202 on minor 0 >>> leds_clevo_mail: 'Clevo D410J' found >>> Registered led device: clevo::mail >>> ACPI Exception (thermal-0514): AE_ERROR, ACPI thermal trip point state changed >>> Please send acpidump to linux-acpi@xxxxxxxxxxxxxxx >>> [20070126] >>> ReiserFS: hda1: found reiserfs format "3.6" with standard journal >>> ReiserFS: hda1: using ordered data mode >>> ReiserFS: hda1: journal params: device hda1, size 8192, journal first block >> 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 >>> ReiserFS: hda1: checking transaction log (hda1) >>> ReiserFS: hda1: Using r5 hash to sort names >>> ip_tables: (C) 2000-2006 Netfilter Core Team >>> eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 >>> NET: Registered protocol family 10 >>> lp0: using parport0 (interrupt-driven). >>> ppdev: user-space parallel port driver >>> Clocksource tsc unstable (delta = -282353088 ns) >>> eth0: no IPv6 routers present >>> warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) >>> irq 16: nobody cared (try booting with the "irqpoll" option) >>> Pid: 0, comm: swapper Not tainted 2.6.25-rc4 #1 >>> [<c0157227>] __report_bad_irq+0x27/0x90 >>> [<c01574c6>] note_interrupt+0x236/0x270 >>> [<c01568d3>] ? handle_IRQ_event+0x53/0x60 >>> [<c0157b6a>] handle_fasteoi_irq+0x7a/0xd0 >>> [<c0106174>] do_IRQ+0x44/0xa0 >>> [<c0104c66>] common_interrupt+0x2e/0x34 >>> [<c0301ac8>] ? _spin_unlock_irq+0x28/0x50 >>> [<c0118974>] finish_task_switch+0x54/0xc0 >>> [<c0118920>] ? finish_task_switch+0x0/0xc0 >>> [<c02ff326>] schedule+0x2b6/0x470 >>> [<f892fdae>] ? acpi_processor_idle+0x0/0x436 [processor] >>> [<c0102b65>] cpu_idle+0xb5/0xd0 >>> [<c02fa66c>] rest_init+0x5c/0x60 >>> ======================= >>> handlers: >>> [<f8915830>] (yenta_interrupt+0x0/0xe0 [yenta_socket]) >>> [<f8aee3f0>] (via_driver_irq_handler+0x0/0x1c0 [via]) >>> Disabling IRQ #16 >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in >> the body of a message to majordomo@xxxxxxxxxxxxxxx >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
