Re: [PATCH 2/8] gpiolib: acpi: Add a ignore interrupt quirk for Peaq C1010

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Sep 09, 2023 at 04:18:10PM +0200, Hans de Goede wrote:
> On the Peaq C1010 2-in-1 INT33FC:00 pin 3 is connected to
> a "dolby" button. At the ACPI level an _AEI event-handler
> is connected which sets an ACPI variable to 1 on both
> edges. This variable can be polled + cleared to 0 using WMI.
> 
> Since the variable is set on both edges the WMI interface is pretty
> useless even when polling. So instead of writing a custom WMI
> driver for this the x86-android-tablets code instantiates
> a gpio-keys platform device for the "dolby" button.
> 
> Add an ignore_interrupt quirk for INT33FC:00 pin 3 on the Peaq C1010,
> so that it is not seen as busy when the gpio-keys driver requests it.
> 
> Note this replaces a hack in x86-android-tablets where it would
> call acpi_gpiochip_free_interrupts() on the INT33FC:00 GPIO
> controller. acpi_gpiochip_free_interrupts() is considered private
> (internal) gpiolib API so x86-android-tablets should stop using it.
> 
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>

Reviewed-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>



[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]
  Powered by Linux