On Fri, Feb 10, 2023 at 05:46:36PM +0100, Werner Sembach wrote:
> commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
> changed the policy such that I2C touchpads may be able to wake up the
> system by default if the system is configured as such.
>
> However on Clevo NH5xAx/TUXEDO XA15 Gen10 there is a mistake in the ACPI
> tables that the TP_ATTN# signal connected to GPIO 10 is configured as
> ActiveLow and level triggered but connected to a pull up.
I'm not sure I understand the issue here. From what you say here it seems
correct ACPI description.
> As soon as the
> system suspends the touchpad loses power and then the system wakes up.
>
> To avoid this problem, introduce a quirk for this model that will prevent
> the wakeup capability for being set for GPIO 10.
I'm not against fixing this, but wouldn't be better to actually target the root
cause and have a different quirk? Or is it me who didn't get what is the root
cause?
--
With Best Regards,
Andy Shevchenko
