commit 1796f808e4bb ("HID: i2c-hid: acpi: Stop setting wakeup_capable")
changed the policy such that I2C touchpads may be able to wake up the
system by default if the system is configured as such.
However on Clevo NH5xAx/TUXEDO XA15 Gen10 there is a mistake in the ACPI
tables that the TP_ATTN# signal connected to GPIO 10 is configured as
ActiveLow and level triggered but connected to a pull up. As soon as the
system suspends the touchpad loses power and then the system wakes up.
To avoid this problem, introduce a quirk for this model that will prevent
the wakeup capability for being set for GPIO 10.
Signed-off-by: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx # v6.1+
---
drivers/gpio/gpiolib-acpi.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c
index e2ab4d5253bea..82e8e43582eba 100644
--- a/drivers/gpio/gpiolib-acpi.c
+++ b/drivers/gpio/gpiolib-acpi.c
@@ -1612,6 +1612,18 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] __initconst = {
.ignore_wake = "ELAN0415:00@9",
},
},
+ {
+ /*
+ * Spurious wakeups from TP_ATTN# pin
+ * Found in BIOS 1.7.7
+ */
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "NH5xAx"),
+ },
+ .driver_data = &(struct acpi_gpiolib_dmi_quirk) {
+ .ignore_wake = "SYNA1202:00@16",
+ },
+ },
{} /* Terminating entry */
};
--
2.34.1
