Re: [lm-sensors] Could the k8temp driver be interfering with ACPI?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Jean Delvare wrote:
> Can you try to load the i2c-dev driver, then run the following commands
> and report the results:
> $ i2cdetect -l
> For each bus listed:
> $ i2cdetect N

FWIW it's really an ATIIXP chipset, but supposedly PIIX4 compatible:

# i2cdetect -l
i2c-0   smbus           SMBus PIIX4 adapter at 8400             Non-I2C SMBus adapter
# i2cdetect 0
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0.
I will probe address range 0x03-0x77.
Continue? [Y/n] y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:          XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
50: 50 51 XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX XX XX XX XX XX XX XX XX 69 XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux