Re: [lm-sensors] Could the k8temp driver be interfering with ACPI?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Chuck,

I'm the author of K8temp. Please can you share with us your DSDT table?
(cat /proc/acpi/dsdt > /tmp/dsdt.bin)

> So, could ACPI and the k8temp driver be at odds?

Yes because ACPI AML code has no synchronization with Linux drivers. Second
reason is that ACPI AML code assign resource regions to itself but with cleared
busy flag - so other drivers could bind and might possibly interfere  with ACPI.

This is very long term problem, I already proposed some possible solutions to
this problem
(http://lists.lm-sensors.org/pipermail/lm-sensors/2007-February/018788.html)

There are some ideas, but none is implemented yet. As you already wrote, best
solution is to stop using k8temp driver.

I will check the DSDT table to confirm this fact.

Thanks,
Rudolf
-
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux IBM ACPI]     [Linux Power Management]     [Linux Kernel]     [Linux Laptop]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Device Mapper]     [Linux Resources]

  Powered by Linux