and before ? can you send lspci -n ? On Sun, 2006-05-28 at 21:50 +0200, Paul Surgeon wrote: > I had a problem with ACPI IRQ routing messing up the USB ehci module. > I have to disable the irq routing with apci=noirq in the bootloader config in > order to use the ehci module. > > Failing to do so results in : > usb 5-1: new high speed USB device using ehci_hcd and address 3 > ehci_hcd 0000:00:10.4: Unlink after no-IRQ? Controller is probably using the > wrong IRQ. > > System : > Kernel 2.6.16.18 > Chipset VIA KT400A > > Regards > Paul > - > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html - To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
