Never in my life I have read so minutely, so much, in so little time!
Hope the subject syntax are sufficient.
Tried to install hsfmodem_7.80.02.06full_i386.deb , but failed. Report
in Instal_output_hsfm.txt
Regards,
Rajib Bandopadhyay
root@Squeeze:/home/user/Downloads/softmodem installation# dpkg -i hsfmodem_7.80.02.06full_i386.deb
(Reading database ... 143756 files and directories currently installed.)
Preparing to replace hsfmodem 7.80.02.06full (using hsfmodem_7.80.02.06full_i386.deb) ...
Removing hsf driver from /lib/modules/2.6.32-5-686-bigmem/
/usr/sbin/hsfmodconflicts: warning: unable to open /lib/modules/2.6.32-5-686-bigmem/modules.pcimap: No such file or directory
/usr/sbin/hsfmodconflicts: warning: unable to open /lib/modules/2.6.32-5-686-bigmem/modules.pcimap: No such file or directory
Unpacking replacement hsfmodem ...
Setting up hsfmodem (7.80.02.06full) ...
Conexant HSF softmodem driver, version 7.80.02.06full
If you need license keys, assistance or more information, please go to:
http://www.linuxant.com/
When reporting a problem for the first time, please send
us the file generated by "hsfconfig --dumpdiag".
No pre-built modules for: Debian-6.0.3 linux-2.6.32-5-686-bigmem i686-SMP
Trying to automatically build the driver modules...
(this requires a C compiler and proper kernel sources to be installed)
WARNING: Building older built-in HDA driver; some audio/modem issues may occur.
If this is the case, please try the latest alsa-driver-linuxant package
available from http://www.linuxant.com/alsa-driver
Building modules for kernel 2.6.32-5-686-bigmem, using source directory
/lib/modules/2.6.32-5-686-bigmem/build. Please wait...
/usr/sbin/hsfmodconflicts: warning: unable to open /lib/modules/2.6.32-5-686-bigmem/modules.pcimap: No such file or directory
/usr/sbin/hsfmodconflicts: warning: unable to open /lib/modules/2.6.32-5-686-bigmem/modules.pcimap: No such file or directory
done.
Warning: no device detected by hsf driver - HDA modems may require reboot
Note: HDA support not compiled in the driver
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-5-686-bigmem
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, debian , ALSA_version=1.0.21
Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-38) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 05:03:32 UTC 2011
scanModem update of: 2010_05_29
/etc/lsb-release not found
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 046d:c05b Logitech, Inc.
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
ID eb1a:5060 eMPIA Technology, Inc.
ID 08dd:0120 Billionton Systems, Inc.
ID 12d1:1436 Huawei Technologies Co., Ltd.
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:08.0 10de:0ac0 1071:9515 Audio device: nVidia Corporation MCP79 High Definition Audio
Modem interrupt assignment and sharing:
21: 1378 0 IO-APIC-fasteoi mmc0, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:08.0 ----
[ 0.180580] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0780000-0xf0783fff]
[ 0.180612] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.180616] pci 0000:00:08.0: PME# disabled
[ 8.144582] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 8.144635] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 8.144937] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 8.144974] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 8.892127] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input10
The PCI slot 00:08.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf0780000 irq 21
PCI slot 00:08.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.32-5-686-bigmem/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f10000
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC268 Analog : ALC268 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf0780000 irq 21
PCI slot 00:08.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.32-5-686-bigmem/kernel/sound/pci/hda/snd-hda-intel.ko
The modem codec file for the HDA card is: /proc/asound/card0/codec#1
--------------------------------------------------------
Codec: Conexant ID 2c06
Address: 1
Function Id: 0x2
Vendor Id: 0x14f12c06
Subsystem Id: 0x14f10000
Revision Id: 0x100000
Modem Function Group: 0x2
The audio card hosts a softmodem chip: 0x14f12c06
14f1 is the Conexant Vendor ID, and 0x14f12c06 a softmodem chipset.
Get a hsfmodem package through http://www.linuxant.com
If not a Conexant modem, the driver hsfmodem-drivers with its dependent drivers:
----------
provide audio + modem support with the modem chip residing on the subsystem.
Any particular card can host any one of several soft modem chips.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:08.0:
Modem chipset detected on
NAME="Audio device: nVidia Corporation MCP79 High Definition Audio "
CLASS=0403
PCIDEV=10de:0ac0
SUBSYS=1071:9515
IRQ=21
HDA2=00:08.0
SOFT=10de:0ac0.HDA
CodecDiagnosed=Conexant_
HDAchipVendorID=14f1
CHIP=0x14f12c06
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:08.0
0403 Audio device: nVidia Corporation MCP79 High Definition Audio
Primary device ID: 10de:0ac0
Subsystem PCI_id 1071:9515
Softmodem codec or chipset from diagnostics: Conexant_0x14f12c06
from Archives:
The HDA card softmodem chip is 0x14f12c06
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>
Start at http://www.linuxant.com/drivers/hsf/full for
eventually download of a hsfmodem-7.68.00.12full_k.???.zip package
with ??? the package type (deb, rpm, tar etc)
These packages have compiled drivers but will also compile a driver,
if there is a mismatch between the resident kernel and provided driver.
The generic hsfmodem-7.68.00.12full.tar.gz package only provides compiling support
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.32_5_686_bigmem
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers
will be auto compiled anyway. Alternatively, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.3.5
and the compiler used in kernel assembly: 4.3.5
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.3
linuc_headers base folder /lib/modules/2.6.32-5-686-bigmem/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
For Debian and some related distributions, a package kernel-kbuild-2.6-32 may be needed to support driver compiling.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273568 Aug 9 2010 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 ppp0 vmnet1 vmnet8
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base-blacklist.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/alsa-base-blacklist.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
For Debian users, the linux-headers-2.6.32-5-686-bigmem.deb can be used instead of kernel-source/
CPU0 CPU1
0: 188957 0 IO-APIC-edge timer
1: 908 0 IO-APIC-edge i8042
7: 1 0 IO-APIC-edge
8: 1 0 IO-APIC-edge rtc0
9: 2376 0 IO-APIC-fasteoi acpi
12: 2862 0 IO-APIC-edge i8042
16: 24768 0 IO-APIC-fasteoi ohci_hcd:usb4
17: 150 0 IO-APIC-fasteoi ohci_hcd:usb3
18: 16 0 IO-APIC-fasteoi ehci_hcd:usb2
19: 27473 0 IO-APIC-fasteoi ehci_hcd:usb1
20: 0 0 IO-APIC-fasteoi eth0
21: 1378 0 IO-APIC-fasteoi mmc0, HDA Intel
22: 1493 0 IO-APIC-fasteoi nvidia
27: 32824 0 PCI-MSI-edge ahci
NMI: 0 0 Non-maskable interrupts
LOC: 16608 74052 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 7028 4776 Rescheduling interrupts
CAL: 1815 1860 Function call interrupts
TLB: 1235 1323 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 5 5 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-686-bigmem (Debian 2.6.32-38) (ben@xxxxxxxxxxxxxxx) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 05:03:32 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000009fed0000 (usable)
[ 0.000000] BIOS-e820: 000000009fed0000 - 000000009fedc000 (ACPI data)
[ 0.000000] BIOS-e820: 000000009fedc000 - 000000009fee1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000009fee1000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-CFFFF uncachable
[ 0.000000] D0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 1 base 000000000 mask F00000000 write-back
[ 0.000000] 2 base 100000000 mask FC0000000 write-back
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037600000 page 2M
[ 0.000000] 0037600000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-17000
[ 0.000000] RAMDISK: 376bc000 - 37fef612
[ 0.000000] Allocated new RAMDISK: 00100000 - 00a33612
[ 0.000000] Move RAMDISK from 00000000376bc000 - 0000000037fef611 to 00100000 - 00a33611
[ 0.000000] ACPI: RSDP 000f7990 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 9fed3c19 00094 (v01 PTLTD ? XSDT 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 9fedbdfe 000F4 (v03 NVIDIA MCP79 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 9fed579b 065EF (v01 NVIDIA MCP79 06040000 MSFT 03000001)
[ 0.000000] ACPI: FACS 9fee0fc0 00040
[ 0.000000] ACPI: MCFG 9fedbef2 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 9fedbf2e 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 9fedbf66 00072 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 9fedbfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 9fed553c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed5496 000A6 (v01 PmRef Cpu7Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed53f0 000A6 (v01 PmRef Cpu6Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed534a 000A6 (v01 PmRef Cpu5Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed52a4 000A6 (v01 PmRef Cpu4Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed51fe 000A6 (v01 PmRef Cpu3Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed5158 000A6 (v01 PmRef Cpu2Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed50b2 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 9fed3cad 01405 (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4232MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00014000 - 0001af00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001503534] TEXT DATA BSS ==> [0001000000 - 0001503534]
[ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #5 [0001504000 - 0001511164] BRK ==> [0001504000 - 0001511164]
[ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #7 [0000100000 - 0000a33612] NEW RAMDISK ==> [0000100000 - 0000a33612]
[ 0.000000] #8 [0000014000 - 000001b000] BOOTMAP ==> [0000014000 - 000001b000]
[ 0.000000] found SMP MP-table at [c00f79c0] f79c0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x0009fed0
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 917085
[ 0.000000] free_area_init_node: node 0, pgdat c13d60c0, node_mem_map c1513200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8465 pages used for memmap
[ 0.000000] HighMem zone: 681409 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10dea301 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c3e00000 s37688 r0 d23752 u1048576
[ 0.000000] pcpu-alloc: s37688 r0 d23752 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 906844
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem root=UUID=93149277-7faa-41af-8606-13ab5108a64c ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Initializing HighMem for node 0 (000377fe:00140000)
[ 0.000000] Memory: 3610784k/5242880k available (2574k kernel code, 56596k reserved, 1393k data, 396k init, 2759496k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc13e0000 - 0xc1443000 ( 396 kB)
[ 0.000000] .data : 0xc12839e5 - 0xc13dfe70 (1393 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12839e5 (2574 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2099.905 MHz processor.
[ 0.004004] Calibrating delay loop (skipped), value calculated using timer frequency.. 4199.81 BogoMIPS (lpj=8399620)
[ 0.004018] Security Framework initialized
[ 0.004023] SELinux: Disabled at boot.
[ 0.004029] Mount-cache hash table entries: 512
[ 0.004139] Initializing cgroup subsys ns
[ 0.004143] Initializing cgroup subsys cpuacct
[ 0.004147] Initializing cgroup subsys devices
[ 0.004149] Initializing cgroup subsys freezer
[ 0.004151] Initializing cgroup subsys net_cls
[ 0.004171] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004174] CPU: L2 cache: 1024K
[ 0.004176] CPU: Physical Processor ID: 0
[ 0.004177] CPU: Processor Core ID: 0
[ 0.004181] mce: CPU supports 6 MCE banks
[ 0.004187] CPU0: Thermal monitoring handled by SMI
[ 0.004190] using mwait in idle threads.
[ 0.004197] Performance Events: Core2 events, Intel PMU driver.
[ 0.004201] ... version: 2
[ 0.004203] ... bit width: 40
[ 0.004204] ... generic registers: 2
[ 0.004206] ... value mask: 000000ffffffffff
[ 0.004207] ... max period: 000000007fffffff
[ 0.004209] ... fixed-purpose events: 3
[ 0.004210] ... event mask: 0000000700000003
[ 0.004215] Checking 'hlt' instruction... OK.
[ 0.021193] ACPI: Core revision 20090903
[ 0.032056] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.032489] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.074235] CPU0: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz stepping 0a
[ 0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring handled by SMI
[ 0.160096] CPU1: Intel Pentium(R) Dual-Core CPU T4300 @ 2.10GHz stepping 0a
[ 0.160109] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.164049] Brought up 2 CPUs
[ 0.164051] Total of 2 processors activated (8399.68 BogoMIPS).
[ 0.164715] CPU0 attaching sched-domain:
[ 0.164719] domain 0: span 0-1 level MC
[ 0.164721] groups: group c3e04420 cpus 0 group c3f04420 cpus 1
[ 0.164727] CPU1 attaching sched-domain:
[ 0.164729] domain 0: span 0-1 level MC
[ 0.164731] groups: group c3f04420 cpus 1 group c3e04420 cpus 0
[ 0.164783] devtmpfs: initialized
[ 0.164783] regulator: core version 0.5
[ 0.164783] NET: Registered protocol family 16
[ 0.164783] ACPI: bus type pci registered
[ 0.164783] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.164783] PCI: MCFG area at e0000000 reserved in E820
[ 0.164783] PCI: Using MMCONFIG for extended config space
[ 0.164783] PCI: Using configuration type 1 for base access
[ 0.164783] bio: create slab <bio-0> at 0
[ 0.164792] ACPI: EC: Look up EC in DSDT
[ 0.170552] ACPI: Interpreter enabled
[ 0.170558] ACPI: (supports S0 S3 S4 S5)
[ 0.170575] ACPI: Using IOAPIC for interrupt routing
[ 0.179255] ACPI: EC: GPE = 0x5e, I/O: command/status = 0x66, data = 0x62
[ 0.179559] ACPI: No dock devices found.
[ 0.179666] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.179905] pci 0000:00:03.0: reg 10 io port: [0x1c00-0x1cff]
[ 0.180020] pci 0000:00:03.2: reg 10 io port: [0x3080-0x30bf]
[ 0.180035] pci 0000:00:03.2: reg 20 io port: [0x3040-0x307f]
[ 0.180040] pci 0000:00:03.2: reg 24 io port: [0x3000-0x303f]
[ 0.180063] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.180069] pci 0000:00:03.2: PME# disabled
[ 0.180201] pci 0000:00:03.5: reg 10 32bit mmio: [0xf0500000-0xf057ffff]
[ 0.180294] pci 0000:00:04.0: reg 10 32bit mmio: [0xf0786000-0xf0786fff]
[ 0.180325] pci 0000:00:04.0: supports D1 D2
[ 0.180327] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180331] pci 0000:00:04.0: PME# disabled
[ 0.180360] pci 0000:00:04.1: reg 10 32bit mmio: [0xf0789000-0xf07890ff]
[ 0.180398] pci 0000:00:04.1: supports D1 D2
[ 0.180400] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180403] pci 0000:00:04.1: PME# disabled
[ 0.180437] pci 0000:00:06.0: reg 10 32bit mmio: [0xf0787000-0xf0787fff]
[ 0.180469] pci 0000:00:06.0: supports D1 D2
[ 0.180471] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180474] pci 0000:00:06.0: PME# disabled
[ 0.180504] pci 0000:00:06.1: reg 10 32bit mmio: [0xf0789400-0xf07894ff]
[ 0.180541] pci 0000:00:06.1: supports D1 D2
[ 0.180543] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180547] pci 0000:00:06.1: PME# disabled
[ 0.180580] pci 0000:00:08.0: reg 10 32bit mmio: [0xf0780000-0xf0783fff]
[ 0.180612] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.180616] pci 0000:00:08.0: PME# disabled
[ 0.180676] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf0788000-0xf0788fff]
[ 0.180681] pci 0000:00:0a.0: reg 14 io port: [0x30d0-0x30d7]
[ 0.180686] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf0789c00-0xf0789cff]
[ 0.180691] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf0789800-0xf078980f]
[ 0.180714] pci 0000:00:0a.0: supports D1 D2
[ 0.180716] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180721] pci 0000:00:0a.0: PME# disabled
[ 0.180761] pci 0000:00:0b.0: reg 20 io port: [0x30c0-0x30cf]
[ 0.180766] pci 0000:00:0b.0: reg 24 32bit mmio: [0xf0784000-0xf0785fff]
[ 0.180836] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180839] pci 0000:00:10.0: PME# disabled
[ 0.181072] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181080] pci 0000:00:15.0: PME# disabled
[ 0.181337] pci 0000:00:16.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181345] pci 0000:00:16.0: PME# disabled
[ 0.181602] pci 0000:00:17.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.181610] pci 0000:00:17.0: PME# disabled
[ 0.181696] pci 0000:00:09.0: transparent bridge
[ 0.181734] pci 0000:02:00.0: reg 10 32bit mmio: [0xcc000000-0xccffffff]
[ 0.181744] pci 0000:02:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.181754] pci 0000:02:00.0: reg 1c 64bit mmio pref: [0xce000000-0xcfffffff]
[ 0.181760] pci 0000:02:00.0: reg 24 io port: [0x4000-0x407f]
[ 0.181767] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.181829] pci 0000:00:10.0: bridge io port: [0x4000-0x4fff]
[ 0.181832] pci 0000:00:10.0: bridge 32bit mmio: [0xcc000000-0xccffffff]
[ 0.181837] pci 0000:00:10.0: bridge 64bit mmio pref: [0xce000000-0xdfffffff]
[ 0.181899] pci 0000:00:15.0: bridge io port: [0x5000-0x5fff]
[ 0.181907] pci 0000:00:15.0: bridge 32bit mmio: [0xf0200000-0xf03fffff]
[ 0.181922] pci 0000:00:15.0: bridge 64bit mmio pref: [0xf0000000-0xf01fffff]
[ 0.182057] pci 0000:06:00.0: reg 10 64bit mmio: [0xf0400000-0xf04007ff]
[ 0.182112] pci 0000:06:00.0: supports D2
[ 0.182114] pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
[ 0.182118] pci 0000:06:00.0: PME# disabled
[ 0.182172] pci 0000:06:00.1: reg 10 64bit mmio: [0xf0400800-0xf04008ff]
[ 0.182226] pci 0000:06:00.1: supports D2
[ 0.182228] pci 0000:06:00.1: PME# supported from D2 D3hot D3cold
[ 0.182233] pci 0000:06:00.1: PME# disabled
[ 0.188149] pci 0000:00:17.0: bridge 32bit mmio: [0xf0400000-0xf04fffff]
[ 0.188208] pci_bus 0000:00: on NUMA node 0
[ 0.188212] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.188465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.188488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.242377] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.242571] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.244015] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.244206] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.244397] ACPI: PCI Interrupt Link [Z002] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.244588] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.244778] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.244969] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.245161] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.245353] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.245545] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.245737] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.245929] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.246124] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.246316] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.246506] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.246698] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.246889] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.247081] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.247273] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.247464] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.247656] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.247847] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.248047] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.248238] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.248430] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.248621] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.248813] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.249004] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.249196] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.249386] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.249578] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.249770] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.249963] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.250154] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.250350] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.250542] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.250732] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.250923] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.251114] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.251305] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.251496] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.251692] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.251888] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.252011] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.252015] vgaarb: loaded
[ 0.252034] PCI: Using ACPI for IRQ routing
[ 0.252110] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.252117] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.252122] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.256015] Switching to clocksource tsc
[ 0.257220] pnp: PnP ACPI init
[ 0.257232] ACPI: bus type pnp registered
[ 0.258137] pnp 00:03: mem resource (0xf0500000-0xf0507fff) overlaps 0000:00:03.5 BAR 0 (0xf0500000-0xf057ffff), disabling
[ 0.260789] pnp: PnP ACPI: found 12 devices
[ 0.260791] ACPI: ACPI bus type pnp unregistered
[ 0.260796] PnPBIOS: Disabled by ACPI PNP
[ 0.260806] system 00:00: iomem range 0xffc00000-0xffffffff could not be reserved
[ 0.260810] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.260813] system 00:00: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.260816] system 00:00: iomem range 0xfed00000-0xfed00fff has been reserved
[ 0.260825] system 00:04: ioport range 0x1000-0x107f has been reserved
[ 0.260827] system 00:04: ioport range 0x1080-0x10ff has been reserved
[ 0.260830] system 00:04: ioport range 0x1400-0x147f has been reserved
[ 0.260833] system 00:04: ioport range 0x1480-0x14ff has been reserved
[ 0.260836] system 00:04: ioport range 0x1800-0x187f has been reserved
[ 0.260839] system 00:04: ioport range 0x1880-0x18ff has been reserved
[ 0.260841] system 00:04: ioport range 0x3040-0x307f has been reserved
[ 0.260844] system 00:04: ioport range 0x3000-0x303f has been reserved
[ 0.260851] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.260853] system 00:07: ioport range 0xa00-0xa0f has been reserved
[ 0.260856] system 00:07: ioport range 0x295-0x296 has been reserved
[ 0.295627] pci 0000:00:09.0: PCI bridge, secondary bus 0000:01
[ 0.295629] pci 0000:00:09.0: IO window: disabled
[ 0.295633] pci 0000:00:09.0: MEM window: disabled
[ 0.295636] pci 0000:00:09.0: PREFETCH window: disabled
[ 0.295644] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xe0000000-0xdfffffff]
[ 0.295647] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[ 0.295649] pci 0000:00:10.0: IO window: 0x4000-0x4fff
[ 0.295653] pci 0000:00:10.0: MEM window: 0xcc000000-0xccffffff
[ 0.295657] pci 0000:00:10.0: PREFETCH window: 0x000000ce000000-0x000000dfffffff
[ 0.295662] pci 0000:00:15.0: PCI bridge, secondary bus 0000:03
[ 0.295667] pci 0000:00:15.0: IO window: 0x5000-0x5fff
[ 0.295677] pci 0000:00:15.0: MEM window: 0xf0200000-0xf03fffff
[ 0.295685] pci 0000:00:15.0: PREFETCH window: 0x000000f0000000-0x000000f01fffff
[ 0.295699] pci 0000:00:16.0: PCI bridge, secondary bus 0000:05
[ 0.295701] pci 0000:00:16.0: IO window: disabled
[ 0.295711] pci 0000:00:16.0: MEM window: disabled
[ 0.295718] pci 0000:00:16.0: PREFETCH window: disabled
[ 0.295732] pci 0000:00:17.0: PCI bridge, secondary bus 0000:06
[ 0.295734] pci 0000:00:17.0: IO window: disabled
[ 0.295744] pci 0000:00:17.0: MEM window: 0xf0400000-0xf04fffff
[ 0.295752] pci 0000:00:17.0: PREFETCH window: disabled
[ 0.295770] pci 0000:00:09.0: setting latency timer to 64
[ 0.295777] pci 0000:00:10.0: setting latency timer to 64
[ 0.296095] ACPI: PCI Interrupt Link [Z00E] enabled at IRQ 23
[ 0.296100] pci 0000:00:15.0: PCI INT A -> Link[Z00E] -> GSI 23 (level, low) -> IRQ 23
[ 0.296109] pci 0000:00:15.0: setting latency timer to 64
[ 0.296401] ACPI: PCI Interrupt Link [Z00I] enabled at IRQ 22
[ 0.296406] pci 0000:00:16.0: PCI INT A -> Link[Z00I] -> GSI 22 (level, low) -> IRQ 22
[ 0.296414] pci 0000:00:16.0: setting latency timer to 64
[ 0.296705] ACPI: PCI Interrupt Link [Z00M] enabled at IRQ 21
[ 0.296710] pci 0000:00:17.0: PCI INT A -> Link[Z00M] -> GSI 21 (level, low) -> IRQ 21
[ 0.296718] pci 0000:00:17.0: setting latency timer to 64
[ 0.296724] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.296727] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.296730] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.296732] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.296735] pci_bus 0000:02: resource 0 io: [0x4000-0x4fff]
[ 0.296738] pci_bus 0000:02: resource 1 mem: [0xcc000000-0xccffffff]
[ 0.296740] pci_bus 0000:02: resource 2 pref mem [0xce000000-0xdfffffff]
[ 0.296743] pci_bus 0000:03: resource 0 io: [0x5000-0x5fff]
[ 0.296745] pci_bus 0000:03: resource 1 mem: [0xf0200000-0xf03fffff]
[ 0.296747] pci_bus 0000:03: resource 2 pref mem [0xf0000000-0xf01fffff]
[ 0.296750] pci_bus 0000:06: resource 1 mem: [0xf0400000-0xf04fffff]
[ 0.296778] NET: Registered protocol family 2
[ 0.296852] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.297135] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.297555] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.297866] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.297869] TCP reno registered
[ 0.297973] NET: Registered protocol family 1
[ 0.407933] pci 0000:02:00.0: Boot video device
[ 0.407985] Unpacking initramfs...
[ 0.668185] Freeing initrd memory: 9421k freed
[ 0.674241] Simple Boot Flag at 0x36 set to 0x1
[ 0.674527] audit: initializing netlink socket (disabled)
[ 0.674541] type=2000 audit(1373011399.671:1): initialized
[ 0.678150] highmem bounce pool size: 64 pages
[ 0.678155] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.679424] VFS: Disk quotas dquot_6.5.2
[ 0.679472] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.679534] msgmni has been set to 1682
[ 0.679703] alg: No test for stdrng (krng)
[ 0.679750] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.679753] io scheduler noop registered
[ 0.679755] io scheduler anticipatory registered
[ 0.679757] io scheduler deadline registered
[ 0.679789] io scheduler cfq registered (default)
[ 0.680109] pcieport 0000:00:15.0: irq 24 for MSI/MSI-X
[ 0.680130] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.680499] pcieport 0000:00:16.0: irq 25 for MSI/MSI-X
[ 0.680519] pcieport 0000:00:16.0: setting latency timer to 64
[ 0.680886] pcieport 0000:00:17.0: irq 26 for MSI/MSI-X
[ 0.680906] pcieport 0000:00:17.0: setting latency timer to 64
[ 0.681146] isapnp: Scanning for PnP cards...
[ 1.034071] isapnp: No Plug & Play device found
[ 1.035311] Linux agpgart interface v0.103
[ 1.035424] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.035792] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.038176] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.039248] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.039254] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.039257] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.039260] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.039263] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.039333] mice: PS/2 mouse device common for all mice
[ 1.039413] rtc_cmos 00:0a: rtc core: registered rtc_cmos as rtc0
[ 1.039461] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 1.039470] cpuidle: using governor ladder
[ 1.039471] cpuidle: using governor menu
[ 1.039475] No iBFT detected.
[ 1.039775] TCP cubic registered
[ 1.039898] NET: Registered protocol family 10
[ 1.040557] Mobile IPv6
[ 1.040560] NET: Registered protocol family 17
[ 1.040574] Using IPI No-Shortcut mode
[ 1.040632] PM: Resume from disk failed.
[ 1.040642] registered taskstats version 1
[ 1.041167] rtc_cmos 00:0a: setting system clock to 2013-07-05 08:03:20 UTC (1373011400)
[ 1.041214] Initalizing network drop monitor service
[ 1.041241] Freeing unused kernel memory: 396k freed
[ 1.041413] Write protecting the kernel text: 2576k
[ 1.041441] Write protecting the kernel read-only data: 940k
[ 1.059698] udev[58]: starting version 164
[ 1.074470] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.186525] usbcore: registered new interface driver usbfs
[ 1.186580] usbcore: registered new interface driver hub
[ 1.186633] usbcore: registered new device driver usb
[ 1.188234] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.188600] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 1.188609] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 1.188614] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.193034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.205638] SCSI subsystem initialized
[ 1.215375] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.215384] ACPI: Thermal Zone [TZ0] (75 C)
[ 1.215745] sdhci: Secure Digital Host Controller Interface driver
[ 1.215747] sdhci: Copyright(c) Pierre Ossman
[ 1.231942] libata version 3.00 loaded.
[ 1.233970] sdhci-pci 0000:06:00.1: SDHCI controller found [1106:401b] (rev 0)
[ 1.233991] sdhci-pci 0000:06:00.1: PCI INT A -> Link[Z00M] -> GSI 21 (level, low) -> IRQ 21
[ 1.235015] sdhci-pci 0000:06:00.1: setting latency timer to 64
[ 1.236087] Registered led device: mmc0::
[ 1.237148] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 1.262312] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:22:20:06:ad:7f
[ 1.262316] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 1.262684] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
[ 1.262693] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 19 (level, low) -> IRQ 19
[ 1.262714] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 1.262718] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 1.262743] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 1.262769] ehci_hcd 0000:00:04.1: debug port 1
[ 1.262778] ehci_hcd 0000:00:04.1: cache line size of 32 is not supported
[ 1.262792] ehci_hcd 0000:00:04.1: irq 19, io mem 0xf0789000
[ 1.276782] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 1.276808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.276810] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.276813] usb usb1: Product: EHCI Host Controller
[ 1.276815] usb usb1: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
[ 1.276817] usb usb1: SerialNumber: 0000:00:04.1
[ 1.276895] usb usb1: configuration #1 chosen from 1 choice
[ 1.276923] hub 1-0:1.0: USB hub found
[ 1.276930] hub 1-0:1.0: 5 ports detected
[ 1.276979] ahci 0000:00:0b.0: version 3.0
[ 1.277036] ahci 0000:00:0b.0: irq 27 for MSI/MSI-X
[ 1.277077] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl IDE mode
[ 1.277081] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum boh
[ 1.277086] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.278111] scsi0 : ahci
[ 1.278199] scsi1 : ahci
[ 1.278285] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 1.278288] ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed
[ 1.279656] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
[ 1.279664] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 18 (level, low) -> IRQ 18
[ 1.279683] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 1.279686] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 1.280712] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 1.280739] ehci_hcd 0000:00:06.1: debug port 1
[ 1.280747] ehci_hcd 0000:00:06.1: cache line size of 32 is not supported
[ 1.280761] ehci_hcd 0000:00:06.1: irq 18, io mem 0xf0789400
[ 1.292007] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 1.292031] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.292034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.292036] usb usb2: Product: EHCI Host Controller
[ 1.292038] usb usb2: Manufacturer: Linux 2.6.32-5-686-bigmem ehci_hcd
[ 1.292040] usb usb2: SerialNumber: 0000:00:06.1
[ 1.292115] usb usb2: configuration #1 chosen from 1 choice
[ 1.292143] hub 2-0:1.0: USB hub found
[ 1.292151] hub 2-0:1.0: 5 ports detected
[ 1.388455] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.388822] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 17
[ 1.388830] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 17 (level, low) -> IRQ 17
[ 1.388848] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 1.388851] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 1.388864] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 1.388887] ohci_hcd 0000:00:04.0: irq 17, io mem 0xf0786000
[ 1.426053] mmc0: new high speed SDHC card at address e624
[ 1.428926] mmcblk0: mmc0:e624 SU08G 7.40 GiB
[ 1.428970] mmcblk0: p1
[ 1.446010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.446014] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.446016] usb usb3: Product: OHCI Host Controller
[ 1.446018] usb usb3: Manufacturer: Linux 2.6.32-5-686-bigmem ohci_hcd
[ 1.446020] usb usb3: SerialNumber: 0000:00:04.0
[ 1.446094] usb usb3: configuration #1 chosen from 1 choice
[ 1.446123] hub 3-0:1.0: USB hub found
[ 1.446130] hub 3-0:1.0: 5 ports detected
[ 1.446498] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 16
[ 1.446506] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 16 (level, low) -> IRQ 16
[ 1.446528] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 1.446531] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.446540] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 1.446562] ohci_hcd 0000:00:06.0: irq 16, io mem 0xf0787000
[ 1.502002] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.502005] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.502007] usb usb4: Product: OHCI Host Controller
[ 1.502009] usb usb4: Manufacturer: Linux 2.6.32-5-686-bigmem ohci_hcd
[ 1.502011] usb usb4: SerialNumber: 0000:00:06.0
[ 1.502076] usb usb4: configuration #1 chosen from 1 choice
[ 1.502101] hub 4-0:1.0: USB hub found
[ 1.502109] hub 4-0:1.0: 5 ports detected
[ 1.589008] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 1.722822] usb 1-1: New USB device found, idVendor=12d1, idProduct=1436
[ 1.722825] usb 1-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 1.722828] usb 1-1: Product: HUAWEI Mobile
[ 1.722830] usb 1-1: Manufacturer: HUAWEI Technology
[ 1.722890] usb 1-1: configuration #1 chosen from 1 choice
[ 1.731728] Initializing USB Mass Storage driver...
[ 1.733715] scsi7 : SCSI emulation for USB Mass Storage devices
[ 1.733807] usb-storage: device found at 2
[ 1.733809] usb-storage: waiting for device to settle before scanning
[ 1.734087] scsi8 : SCSI emulation for USB Mass Storage devices
[ 1.734158] usbcore: registered new interface driver usb-storage
[ 1.734163] USB Mass Storage support registered.
[ 1.734170] usb-storage: device found at 2
[ 1.734171] usb-storage: waiting for device to settle before scanning
[ 1.836013] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 2.150957] usb 1-3: New USB device found, idVendor=08dd, idProduct=0120
[ 2.150960] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.150963] usb 1-3: Product: 802.11 bg WLAN
[ 2.150965] usb 1-3: Manufacturer: Ralink
[ 2.151050] usb 1-3: configuration #1 chosen from 1 choice
[ 2.165012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.168009] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.181325] ata2.00: ATAPI: hp DVD RW AD-7561S, AH73, max UDMA/100
[ 2.195075] ata2.00: configured for UDMA/100
[ 2.202219] ata1.00: ATA-8: WDC WD3200BEVT-11ZCT0, 11.01A11, max UDMA/133
[ 2.202222] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.204674] ata1.00: configured for UDMA/133
[ 2.220101] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEVT-1 11.0 PQ: 0 ANSI: 5
[ 2.221261] scsi 1:0:0:0: CD-ROM hp DVD RW AD-7561S AH73 PQ: 0 ANSI: 5
[ 2.234089] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.234134] sd 0:0:0:0: [sda] Write Protect is off
[ 2.234137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.234156] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.234318] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.237776] Uniform CD-ROM driver Revision: 3.20
[ 2.237861] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.242451] sda1 sda2 < sda5 sda6 > sda3 sda4
[ 2.264886] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.269893] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.269930] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.464012] usb 2-4: new high speed USB device using ehci_hcd and address 3
[ 2.598061] usb 2-4: New USB device found, idVendor=eb1a, idProduct=5060
[ 2.598064] usb 2-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.598144] usb 2-4: configuration #1 chosen from 1 choice
[ 2.900011] usb 3-4: new full speed USB device using ohci_hcd and address 2
[ 2.935770] PM: Starting manual resume from disk
[ 2.935774] PM: Resume from partition 8:5
[ 2.935776] PM: Checking hibernation image.
[ 2.938015] PM: Error -22 checking image file
[ 2.938017] PM: Resume from disk failed.
[ 2.972220] kjournald starting. Commit interval 5 seconds
[ 2.972230] EXT3-fs: mounted filesystem with ordered data mode.
[ 3.161065] usb 3-4: New USB device found, idVendor=0a12, idProduct=0001
[ 3.161068] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.161150] usb 3-4: configuration #1 chosen from 1 choice
[ 3.468010] usb 4-2: new low speed USB device using ohci_hcd and address 2
[ 3.680066] usb 4-2: New USB device found, idVendor=046d, idProduct=c05b
[ 3.680069] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.680072] usb 4-2: Product: USB Optical Mouse
[ 3.680073] usb 4-2: Manufacturer: Logitech
[ 3.680154] usb 4-2: configuration #1 chosen from 1 choice
[ 4.376277] udev[456]: starting version 164
[ 4.765641] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 4.765647] ACPI: Power Button [PWRB]
[ 4.765702] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:23/PNP0C0D:00/input/input2
[ 4.774838] ACPI: SSDT 9fede3d8 00232 (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 4.775462] ACPI: SSDT 9fede9ad 0067D (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 4.777314] Monitor-Mwait will be used to enter C-1 state
[ 4.777335] Monitor-Mwait will be used to enter C-2 state
[ 4.777352] Monitor-Mwait will be used to enter C-3 state
[ 4.777357] Marking TSC unstable due to TSC halts in idle
[ 4.777393] Switching to clocksource hpet
[ 4.777819] processor LNXCPU:00: registered as cooling_device0
[ 4.778427] ACPI: SSDT 9fede215 001C3 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 4.778778] ACPI: SSDT 9fede928 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 4.779526] processor LNXCPU:01: registered as cooling_device1
[ 4.794578] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 4.804597] usbcore: registered new interface driver usbserial
[ 4.804615] USB Serial support registered for generic
[ 4.804684] usbcore: registered new interface driver usbserial_generic
[ 4.804686] usbserial: USB Serial Driver core
[ 4.884153] ACPI: AC Adapter [AC] (on-line)
[ 4.887455] ACPI Warning for \_SB_.PCI0.BAT0._BIF: Return Package type mismatch at index 9 - found [NULL Object Descriptor], expected String/Buffer (20090903/nspredef-1012)
[ 4.890507] ACPI: Battery Slot [BAT0] (battery present)
[ 4.890603] ACPI: WMI: Mapper loaded
[ 4.916462] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.929571] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.938231] USB Serial support registered for GSM modem (1-port)
[ 4.938660] option 1-1:1.0: GSM modem (1-port) converter detected
[ 4.938905] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 4.938929] option 1-1:1.3: GSM modem (1-port) converter detected
[ 4.939151] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 4.939166] option 1-1:1.4: GSM modem (1-port) converter detected
[ 4.939285] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 4.939342] usbcore: registered new interface driver option
[ 4.939344] option: v0.7.2:USB Driver for GSM modems
[ 4.943117] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 4.968435] ACPI: Lid Switch [LID]
[ 4.968511] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4
[ 4.968554] ACPI: Sleep Button [SBTN]
[ 4.968597] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 4.968621] ACPI: Power Button [PWRF]
[ 4.972532] usbcore: registered new interface driver hiddev
[ 4.973282] acpi device:09: registered as cooling_device2
[ 4.973554] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:08/LNXVIDEO:00/input/input6
[ 4.973630] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 4.978398] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.0/input/input7
[ 4.978496] generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:06.0-2/input0
[ 4.978520] usbcore: registered new interface driver usbhid
[ 4.978522] usbhid: v2.6:USB HID core driver
[ 5.054804] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 5.054822] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 5.517717] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0/0x0
[ 5.549583] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input8
[ 6.538150] nvidia: module license 'NVIDIA' taints kernel.
[ 6.538154] Disabling lock debugging due to kernel taint
[ 6.736414] usb-storage: device scan complete
[ 6.736777] usb-storage: device scan complete
[ 6.738162] scsi 7:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 6.738849] scsi 8:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 6.744520] sr1: scsi-1 drive
[ 6.744617] sr 7:0:0:0: Attached scsi CD-ROM sr1
[ 6.744673] sr 7:0:0:0: Attached scsi generic sg2 type 5
[ 6.746654] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 6.799149] sd 8:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 6.801029] sd 8:0:0:0: [sdb] Write Protect is off
[ 6.801032] sd 8:0:0:0: [sdb] Mode Sense: 0f 0e 00 00
[ 6.801034] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 6.804021] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 6.804075] sdb: sdb1
[ 6.850024] sd 8:0:0:0: [sdb] Assuming drive cache: write through
[ 6.850081] sd 8:0:0:0: [sdb] Attached SCSI removable disk
[ 7.301517] Linux video capture interface: v2.00
[ 7.521600] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23
[ 7.521606] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23
[ 7.521909] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 22
[ 7.521913] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 22 (level, low) -> IRQ 22
[ 7.521919] nvidia 0000:02:00.0: setting latency timer to 64
[ 7.521923] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 7.522174] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.31 Tue Jun 1 22:08:27 PDT 2010
[ 7.565266] Bluetooth: Core ver 2.15
[ 7.565326] NET: Registered protocol family 31
[ 7.565328] Bluetooth: HCI device and connection manager initialized
[ 7.565331] Bluetooth: HCI socket layer initialized
[ 7.638365] cfg80211: Using static regulatory domain info
[ 7.638367] cfg80211: Regulatory domain: US
[ 7.638369] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.638372] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 7.638375] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.638378] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.638380] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.638383] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 7.638385] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 7.638764] cfg80211: Calling CRDA for country: US
[ 7.641922] uvcvideo: Found UVC 1.00 device <unnamed> (eb1a:5060)
[ 7.642614] input: UVC Camera (eb1a:5060) as /devices/pci0000:00/0000:00:06.1/usb2/2-4/2-4:1.0/input/input9
[ 7.642703] usbcore: registered new interface driver uvcvideo
[ 7.642706] USB Video Class driver (v0.1.0)
[ 7.832716] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 7.833054] usbcore: registered new interface driver btusb
[ 8.144582] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 8.144635] HDA Intel 0000:00:08.0: power state changed by ACPI to D0
[ 8.144932] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 8.144937] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 8.144940] hda_intel: Disable MSI for Nvidia chipset
[ 8.144974] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 8.316447] phy0: Selected rate control algorithm 'minstrel'
[ 8.317086] Registered led device: rt73usb-phy0::radio
[ 8.317100] Registered led device: rt73usb-phy0::assoc
[ 8.317114] Registered led device: rt73usb-phy0::quality
[ 8.318313] usbcore: registered new interface driver rt73usb
[ 8.854374] hda_codec: ALC268: BIOS auto-probing.
[ 8.892127] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:08.0/input/input10
[ 9.613325] Adding 11261524k swap on /dev/sda5. Priority:-1 extents:1 across:11261524k
[ 9.812742] EXT3 FS on sda6, internal journal
[ 9.991419] loop: module loaded
[ 10.761128] eth0: no link during initialization.
[ 10.761608] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 11.005960] PPP generic driver version 2.4.2
[ 16.247058] Bluetooth: L2CAP ver 2.14
[ 16.247061] Bluetooth: L2CAP socket layer initialized
[ 16.253567] Bluetooth: RFCOMM TTY layer initialized
[ 16.253571] Bluetooth: RFCOMM socket layer initialized
[ 16.253573] Bluetooth: RFCOMM ver 1.11
[ 16.497820] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.497823] Bluetooth: BNEP filters: protocol multicast
[ 16.592652] Bridge firewalling registered
[ 16.724353] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.724356] Bluetooth: SCO socket layer initialized
[ 17.534317] lp: driver loaded but no devices found
[ 17.538390] ppdev: user-space parallel port driver
[ 23.171849] /dev/vmmon[2045]: Module vmmon: registered with major=10 minor=165
[ 23.171860] /dev/vmmon[2045]: Module vmmon: initialized
[ 23.211478] /dev/vmci[2053]: VMCI: Driver initialized.
[ 23.211749] /dev/vmci[2053]: Module vmci: registered with major=10 minor=58
[ 23.211754] /dev/vmci[2053]: Module vmci: initialized
[ 24.940157] /dev/vmnet: open called by PID 2208 (vmnet-dhcpd)
[ 24.940169] /dev/vmnet: hub 1 does not exist, allocating memory.
[ 24.940209] /dev/vmnet: port on hub 1 successfully opened
[ 25.090807] /dev/vmnet: open called by PID 2213 (vmnet-netifup)
[ 25.090823] /dev/vmnet: port on hub 1 successfully opened
[ 25.302495] /dev/vmnet: open called by PID 2223 (vmnet-dhcpd)
[ 25.302509] /dev/vmnet: hub 8 does not exist, allocating memory.
[ 25.302548] /dev/vmnet: port on hub 8 successfully opened
[ 25.352705] /dev/vmnet: open called by PID 2229 (vmnet-natd)
[ 25.352722] /dev/vmnet: port on hub 8 successfully opened
[ 25.392636] /dev/vmnet: open called by PID 2230 (vmnet-netifup)
[ 25.392654] /dev/vmnet: port on hub 8 successfully opened
[ 35.368023] vmnet1: no IPv6 routers present
[ 35.809035] vmnet8: no IPv6 routers present
[ 237.927426] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 240.682719] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 241.190039] ISO 9660 Extensions: Microsoft Joliet Level 1
[ 241.191046] ISOFS: changing to secondary root
[ 860.482992] PPP BSD Compression module registered
[ 860.522085] PPP Deflate Compression module registered
[ 861.569313] ip_tables: (C) 2000-2006 Netfilter Core Team
Module Size Used by
xt_TCPMSS 2303 1
xt_tcpmss 1017 1
xt_tcpudp 1743 1
iptable_mangle 2325 1
ip_tables 7706 1 iptable_mangle
x_tables 8327 4 xt_TCPMSS,xt_tcpmss,xt_tcpudp,ip_tables
ppp_deflate 2790 0
zlib_deflate 15822 1 ppp_deflate
bsd_comp 4120 0
ppp_async 5305 1
crc_ccitt 1039 1 ppp_async
isofs 24608 1
nls_utf8 908 3
nls_cp437 4489 2
vfat 6570 2
fat 34912 1 vfat
vmnet 31893 10
vmblock 8518 1
vsock 29255 0
vmci 41791 1 vsock
vmmon 53868 0
acpi_cpufreq 4951 0
cpufreq_stats 1997 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 0
parport_pc 15871 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
rfcomm 25199 12
l2cap 21721 16 bnep,rfcomm
crc16 1027 1 l2cap
ppp_generic 16359 7 ppp_deflate,bsd_comp,ppp_async
slhc 3691 1 ppp_generic
loop 9769 0
snd_hda_codec_realtek 163318 1
arc4 974 2
ecb 1405 2
snd_hda_intel 16907 3
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm 47386 2 snd_hda_intel,snd_hda_codec
rt73usb 17605 0
crc_itu_t 1035 1 rt73usb
rt2x00usb 5713 1 rt73usb
rt2x00lib 19125 2 rt73usb,rt2x00usb
snd_seq 35463 0
mac80211 123586 2 rt2x00usb,rt2x00lib
snd_timer 12270 2 snd_pcm,snd_seq
btusb 8101 2
snd_seq_device 3673 1 snd_seq
uvcvideo 45582 0
cfg80211 87637 2 rt2x00lib,mac80211
bluetooth 36319 9 sco,bnep,rfcomm,l2cap,btusb
joydev 6739 0
videodev 25605 1 uvcvideo
snd 34415 14 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
rfkill 10264 5 cfg80211,bluetooth
nvidia 9843640 30
v4l1_compat 10250 2 uvcvideo,videodev
i2c_nforce2 4556 0
soundcore 3450 1 snd
usbhid 28056 0
i2c_core 12787 3 videodev,nvidia,i2c_nforce2
snd_page_alloc 5113 2 snd_hda_intel,snd_pcm
video 14605 0
output 1204 1 video
option 12638 1
shpchp 21264 0
pci_hotplug 18545 1 shpchp
psmouse 44809 0
usb_wwan 6464 1 option
hid 50909 1 usbhid
serio_raw 2916 0
usbserial 22100 5 option,usb_wwan
pcspkr 1207 0
wmi 3575 0
processor 26335 3 acpi_cpufreq
evdev 5609 22
button 3598 0
ac 1640 0
battery 3782 0
ext3 94396 1
jbd 32317 1 ext3
mbcache 3762 1 ext3
sg 19937 0
sd_mod 26005 5
crc_t10dif 1012 1 sd_mod
sr_mod 10770 1
cdrom 26487 1 sr_mod
ata_generic 2247 0
usb_storage 30937 2
mmc_block 6472 2
ohci_hcd 17191 0
ahci 27426 2
sdhci_pci 4597 0
libata 116181 2 ata_generic,ahci
sdhci 12343 1 sdhci_pci
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
mmc_core 38697 2 mmc_block,sdhci
led_class 1757 2 rt2x00lib,sdhci
scsi_mod 104865 5 sg,sd_mod,sr_mod,usb_storage,libata
ehci_hcd 29105 0
forcedeth 41069 0
usbcore 99317 12 rt73usb,rt2x00usb,btusb,uvcvideo,usbhid,option,usb_wwan,usbserial,usb_storage,ohci_hcd,ehci_hcd
nls_base 4541 6 isofs,nls_utf8,nls_cp437,vfat,fat,usbcore
