Good afternoon,
the attached mail is result of scanmodem.
Waiting for a reply, I send best regards.
--
/Gaetano Mastellone/
*/Per favore, pensa all’ambiente prima di stampare questa nota./*
*/Please consider the environment before printing this mail note./*
/Il presente messaggio di posta elettronica potrebbe avere carattere
riservato ed essere tutelato dal segreto professionale ed è ad esclusivo
utilizzo del destinatario indicato in indirizzo. Qualora non foste il
destinatario del presente messaggio (o autorizzato dal destinatario a
riceverlo) non potete utilizzare, inoltrare, duplicare a nessuno il
presente messaggio e ogni documento ad esso allegato. Se avete ricevuto
il presente messaggio per errore, Vi preghiamo di avvertire il mittente
immediatamente tramite posta elettronica e di cancellare il presente
messaggio./
/This email contains information which is confidential and may be
privileged. Unless you are the intended addressee (or authorised to
receive for the addressee) you may not use, forward, copy or disclose to
anyone this email or any information contained in this email. If you
have received this email in error, please advise the sender by reply
email immediately and delete this email./
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 3.5.0-34-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.25
Linux version 3.5.0-34-generic (buildd@akateko) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #55~precise1-Ubuntu SMP Fri Jun 7 16:32:06 UTC 2013
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=precise
AptRepositoryStem=http://it.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_atiixp_modem snd_via82xx_modem snd_intel8x0m snd_hda_intel
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
01:02.0 Modem: Motorola SM56 Data Fax Modem (rev 04)
High Definition Audio cards can host modem chips.
For candidate card in slot 01:02.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:02.0 1057:3052 1057:3020 Modem: Motorola SM56 Data Fax Modem
Modem interrupt assignment and sharing:
17: 0 IO-APIC-fasteoi snd_intel8x0
--- Bootup diagnostics for card in PCI slot 01:02.0 ----
[ 0.107936] pci 0000:01:02.0: [1057:3052] type 00 class 0x070300
[ 0.107958] pci 0000:01:02.0: reg 10: [mem 0xfe5ff000-0xfe5fffff]
[ 0.107970] pci 0000:01:02.0: reg 14: [io 0xb800-0xb8ff]
[ 0.108062] pci 0000:01:02.0: PME# supported from D0 D3hot D3cold
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 01:02.0:
Modem chipset detected on
NAME="Modem: Motorola SM56 Data Fax Modem "
CLASS=0703
PCIDEV=1057:3052
SUBSYS=1057:3020
IRQ=17
IDENT=slamr
For candidate modem in: 01:02.0
0703 Modem: Motorola SM56 Data Fax Modem
Primary device ID: 1057:3052
Support type needed or chipset: slamr
1057:3052 has a Motorola chipset, poorly supported by Motorola itself
However Zello discovered that drivers written to support Smartlink modems do support the 1057:3052 chipset!!
It sufficed to add 1057:3052 to the list of modem cards recognized by the Smartlink slamr driver.
There is a ungrab-winmodem driver used in conjunction with slamr, which must have 1057:3052
similarly added. See messages from Zello:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00846.html
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00848.html
and Alvaro Aguirre about the ungrab-winmodem fix:
http://linmodems.technion.ac.il/bigarch/archive-seventh/msg00990.html
For general guidance on ungrab-winmodem + slamr usage, read the DOCs/Smartlink.txt
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
For 3.5.0-34-generic compiling drivers is necessary. As of October 2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.6.3
and the compiler used in kernel assembly: 4.6
linux-headers-3.5.0-34-generic resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-3.5.0-34-generic
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273272 feb 4 2011 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout /dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) || (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout /dev/slusb0)
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
