Gillarn, scanModem does not display full information needed to recommend a driver. For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1f.6 8086:24c6 103c:0890 Modem: Intel Corporation 82801DB/DBL/DBM Modem interrupt assignment and sharing: 11: 40794 XT-PIC-XT Intel 82801DB-ICH4, eth0 --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- [ 0.560512] pci 0000:00:1f.6: reg 10 io port: [0x3400-0x34ff] [ 0.560519] pci 0000:00:1f.6: reg 14 io port: [0x3800-0x387f] [ 0.560548] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.560553] pci 0000:00:1f.6: PME# disabled [ 1.827548] serial 0000:00:1f.6: PCI INT B -> Link[C0C3] -> GSI 11 (level, low) -> IRQ 11 [ 1.827556] serial 0000:00:1f.6: PCI INT B disabled This driver could be supported by SLMODEMD variant, or by hsfmodem software. Marv, I want to recommend him SLMODEMD but would prefer that you verify that this modem is indeed supported by slmodemd+alsa. Otherwise the modem may be supported by hsfmodem drivers by linuxant? Which modem driver should he try to see if it would serve this modem? Best Regards, Antonio On Fri, Oct 5, 2012 at 6:23 AM, Gillarn Mutale <gmutale1@xxxxxxxxx> wrote: >
