I just thought it would be best if you knew all the facts. where would i be looking for a jumper? My modem card has none. Sent with Verizon Mobile Email ---Original Message--- From: "Philippe Vouters" <philippe.vouters@xxxxxxxxxxx> Sent: 7/5/2012 10:50 pm To: "Andrew Merczynski-Hait" <andrewmh20@xxxxxxxxxx> Cc: "'Antonio Olivares'" <olivares14031@xxxxxxxxx>, "'Linmodems'" <discuss@xxxxxxxxxxxxx>, "'Marvin Stodolsky'" <marvin.stodolsky@xxxxxxxxx> Subject: Re: Can you erase /etc/init.d/537_boot ? Andrew, This should have to deal with either your BIOS setup or a jumper inside your computer. Obviously a NO DIALTONE has nothing to deal with a username/password issue. The username/password issue comes up after getting a modem carrier which comes after dialing. Philippe Vouters (Fontainebleau/France) URL: http://vouters.dyndns.org/ SIP: sip:Vouters@xxxxxxxxxxxxxxxx Le 06/07/2012 04:30, Andrew Merczynski-Hait a écrit : > I think I may have issues with my user name and password, but that is I > think irrelevant to this. When I call the number form a phone I hear dial up > sounds. So, even if I have to deal with user name/password issues, it should > still dial. > > -----Original Message----- > From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx] > Sent: Thursday, July 05, 2012 8:36 PM > To: Andrew Merczynski-Hait; 'Antonio Olivares' > Cc: 'Linmodems'; 'Marvin Stodolsky' > Subject: Re: Can you erase /etc/init.d/537_boot ? > > Andrew, > > Yes indeed, the boot in recovery mode did it perfectly. I took advantage of > this day to review the ungrab-windom.c code and the intel 537 code. > However, I still get a NO DIALTONE. Can you manually dial using your phone > appartus the phone numbers in /etc/wvdial.conf and ~/wvdial.conf and tell me > whether you get a DAILTONE and a carrier ? > > Antonio, > > You may download > http://vouters.dyndns.org/Intel/ungrab-winmodem-20120705.tar.gz I added to > it 537 modems at least the ones handled by the Intel 537EP driver. > Also I changed somehow the code. > > Awaiting for Andrew's response. > Best regards to both. > > Philippe Vouters (Fontainebleau/France) > URL: http://vouters.dyndns.org/ > SIP: sip:Vouters@xxxxxxxxxxxxxxxx > > Le 05/07/2012 23:50, Andrew Merczynski-Hait a écrit : >> Done. Instead of using the CD I just booted into recovery mode and did >> it. I hope that accomplishes the same goal. >> >> -----Original Message----- >> From: Philippe Vouters [mailto:philippe.vouters@xxxxxxxxxxx] >> Sent: Thursday, July 05, 2012 5:39 AM >> To: Andrew Merczynski-Ha it; Linmodems; Antonio Olivares; Marvin >> Stodolsky >> Subject: Can you erase /etc/init.d/537_boot ? >> >> Dear Andrew, >> >> I just realized that I was not erasing /etc/init.d/537_boot but >> /etc/rc.d/537_boot. This works on a Fedora system but not on a >> Debian/Ubuntu system. This problem was specific to makefile_537. So I >> modified my >> makefile_537 to correctly perform this action at the very beginning of >> the uninstall actions. I took advantage to also move this action at >> the very beginning of the makefile_536 in the uninstall make target. >> >> Meanwhile your system has crashed. Can you boot the Ubuntu Rescue CD >> and erase /etc/init.d/537_boot ? >> >> Thank you so much to have removed the ModemManager. I hope I shall at >> last be able to get rid from the NO DIALTONE message, but I am not so > sure. >> There are things Intel did I do not understand in the driver. This is >> specifically related to your modem board. I must dig into disassembled >> code >> (537core.lib) to attempt to understand. >> >> -- >> Philippe Vouters (Fontainebleau/France) >> URL: http://vouters.dyndns.org/ >> SIP: sip:Vouters@xxxxxxxxxxxxxxxx >> >> > >
