Andrew,
I had to change a timeout in efaxio.c so that efax works.
andrew@ubuntu-11:~/Downloads/efax$ ./efax -vewinchmart
./efax: Thu Jan 5 04:12:01 2006 efax v 0.9a-001114 Copyright 1999 Ed Casas
./efax: Thu Jan 5 04:12:01 2006 efax v 0.9a-001114 Copyright 1999 Ed Casas
efax: 12:01 compiled Jan 5 2006 04:01:03
efax: 12:01 argv[0]=./efax
efax: 12:01 argv[1]=-vewinchmart
efax: 12:03 opened /dev/modem
efax: 12:03 command "Q0V1"
efax: 12:03 waiting 5.0 s
efax: 12:07 .276 [ATQ0V1<CR><CR><LF>]
efax: 12:07 .336 [OK<CR><LF>]
efax: 12:07 response "OK"
efax: 12:07 command "E0"
efax: 12:07 waiting 5.0 s
efax: 12:07 .456 [ATE0<CR><CR><LF>]
efax: 12:07 .504 [OK<CR><LF>]
efax: 12:07 response "OK"
efax: 12:07 command "I3"
efax: 12:07 waiting 5.0 s
efax: 12:07 .656 [<CR><LF>537EP <CR><LF>]
efax: 12:07 .676 [<CR><LF>OK<CR><LF>]
efax: 12:07 response "OK"
efax: 12:07 command "+FCLASS=?"
efax: 12:07 waiting 5.0 s
efax: 12:07 .824 [<CR><LF>0,1,2,2.0,8<CR><LF>]
efax: 12:07 .844 [<CR><LF>OK<CR><LF>]
efax: 12:07 response "OK"
efax: 12:07 command "+FCLASS=2.0"
efax: 12:07 waiting 5.0 s
efax: 12:08 .016 [<CR><LF>OK<CR><LF>]
efax: 12:08 response "OK"
efax: 12:08 command "+FMI?"
efax: 12:08 waiting 5.0 s
efax: 12:08 .164 [<CR><LF>Intel Corporation<CR><LF>]
efax: 12:08 .184 [<CR><LF>OK<CR><LF>]
efax: 12:08 response "OK"
efax: 12:08 command "+FMM?"
efax: 12:08 waiting 5.0 s
efax: 12:08 .336 [<CR><LF>Intel V92 Data Fax Voice<CR><LF>]
efax: 12:08 .336 [<CR><LF>H.324 video-ready rev. 1.0<CR><LF>]
efax: 12:08 .356 [<CR><LF>OK<CR><LF>]
efax: 12:08 response "OK"
efax: 12:08 command "+FMR?"
efax: 12:08 waiting 5.0 s
efax: 12:08 .504 [<CR><LF>RSA REV 4.04 <CR><LF>]
efax: 12:08 .524 [<CR><LF>OK<CR><LF>]
efax: 12:08 response "OK"
efax: 12:08 using 537EP Intel Corporation Intel V92 Data Fax Voice RSA
REV 4.04 in class 2.0
efax: 12:08 command "+FIP"
efax: 12:08 waiting 5.0 s
efax: 12:08 .684 [<CR><LF>ERROR<CR><LF>]
efax: 12:08 response "ERROR"
efax: 12:08 Warning: wrong response after command: +FIP
efax: 12:08 command "+FNR=1,1,1,0"
efax: 12:08 waiting 5.0 s
efax: 12:08 .856 [<CR><LF>OK<CR><LF>]
efax: 12:08 response "OK"
efax: 12:08 command "+FLO=1"
efax: 12:08 waiting 5.0 s
efax: 12:09 .024 [<CR><LF>OK<CR><LF>]
efax: 12:09 response "OK"
efax: 12:09 command "+FBO=0"
efax: 12:09 waiting 5.0 s
efax: 12:09 .196 [<CR><LF>OK<CR><LF>]
efax: 12:09 response "OK"
efax: 12:09 command "+FCR=1"
efax: 12:09 waiting 5.0 s
efax: 12:09 .364 [<CR><LF>OK<CR><LF>]
efax: 12:09 response "OK"
efax: 12:09 command "+FIS?"
efax: 12:09 waiting 5.0 s
efax: 12:09 .416 [<CR><LF>1,5,0,2,0,0,0,0<CR><LF>]
efax: 12:09 .436 [<CR><LF>OK<CR><LF>]
efax: 12:09 response "OK"
efax: 12:09 command "+FLI=" ""
efax: 12:09 waiting 5.0 s
efax: 12:09 .504 [<CR><LF>OK<CR><LF>]
efax: 12:09 response "OK"
efax: 12:09 command "A"
efax: 12:09 waiting 120.0 s
efax: 13:40 .256 [<CR><LF>NO CARRIER<CR><LF>]
efax: 13:40 response "NO CARRIER"
efax: 13:40 Error: unable to answer call
efax: 13:40 command "Q0V1"
efax: 13:40 waiting 5.0 s
efax: 13:40 .436 [<CR><LF>OK<CR><LF>]
efax: 13:40 response "OK"
efax: 13:40 command "H"
efax: 13:40 waiting 5.0 s
efax: 13:41 .296 [<CR><LF>OK<CR><LF>]
efax: 13:41 response "OK"
efax: 13:41 done, returning 3 (invalid modem response)
andrew@ubuntu-11:~/Downloads/efax$
However I can't get wvdialconf to work. It says no modem detected. This
is unlike with my 536EP modem. Also I did not need to change the timeout
in efax when I tested it on my side. My belief is that there again is a
too short timeout problem with wvdialconf.
It almost 4AM here. I shall go to bed. Can you keep your computer up for
the night ? I shall work again onto tomorrow noon French time.
--
Philippe Vouters (Fontainebleau/France)
URL: http://vouters.dyndns.org/
SIP: sip:Vouters@sip.linphone.org0
