Hesham, On Wed, Dec 14, 2011 at 11:54 AM, Hesham M.Hafez <heshamhfz1@xxxxxxxxx> wrote: > On 12/14/2011 05:31 PM, Antonio Olivares wrote: >> >> [Dialer Defaults] >> Modem = /dev/modem >> Baud = 57600 >> Init1 = ATZ >> Init2 = ATQ0 V1 E1 S0=0&C1&D2 >> Init3 = >> Area Code = >> Phone = PHONE_NO_GOES_HERE >> Username =YOUR_USERNAME_GOES_HERE >> Password =********** >> Ask Password = 0 >> Dial Command = ATDT >> Stupid Mode = 1 >> Compuserve = 0 >> Force Address = >> Idle Seconds = 300 >> DialMessage1 = >> DialMessage2 = >> ISDN = 0 >> Auto DNS = 1 > > I used the following parameters in /etc/wvdial.conf > > > [Dialer Defaults] > Modem = /dev/modem > Baud = 57600 > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 > Init3 = > Area Code = > Phone = 0777 7777 Here the phone number should be all together and not separated : 07777777 > > Dial Command = ATDT > Stupid Mode = 1 > Compuserve = 0 > Force Address = > Idle Seconds = 300 > DialMessage1 = > DialMessage2 = > ISDN = 0 > Auto DNS = 1 > > But unfortunately doesn't work too. My phone line is down now I just want > test the modem and make sure that it's installed correctly since I'll use it > in fax server not for Internet purposes I don't know how to advice here for faxing. Regards, Antonio
