Dear Marvin, I have just tried to build the hsfmodem module. The "make install" procedure ended with errors. Please find attached the logfile compiled by the procedure. What can I do next? Thanks a lot in advance. -- Un saludo, Kind regards, Antonio Rodulfo Ingeniero Industrial, Consultor de Proyectos Industrial Engineer, Project Consultant 2011/10/7 Antonio Rodulfo <antonio.rodulfo@xxxxxxxxx>: > Ok, then! > Thanks, Marvin! > -- > Un saludo, > Kind regards, > > Antonio Rodulfo > Ingeniero Industrial, Consultor de Proyectos > Industrial Engineer, Project Consultant > > > > 2011/10/7 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >> AR >> >> Download both packages. >> Try the hsfmodem package installation alone first. >> It may abort with message that the linuxant-alsa package is needed. >> >> In that case, install the linuxant-alsa package. >> Then again try the hsfmodem package. >> >> MarvS >> >> On Fri, Oct 7, 2011 at 10:05 AM, Antonio Rodulfo >> <antonio.rodulfo@xxxxxxxxx> wrote: >>> Dear Marvin, >>> >>> Thank you so much for your help. >>> If I get it right, I must intall the recommended alsa driver first >>> and, then, download and install the hsfmodem files. >>> Can you confirm it? >>> >>> Thanks in advance. >>> -- >>> Un saludo, >>> Kind regards, >>> >>> Antonio Rodulfo >>> Ingeniero Industrial, Consultor de Proyectos >>> Industrial Engineer, Project Consultant >>> >>> >>> >>> 2011/10/6 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>> AR >>>> >>>> for x86_64 systems you can use hsfmodem-7.80.02.06x86_64full.tar.gz >>>> found near the bottom of http://www.linuxant.com/drivers/hsf/full/downloads.php >>>> Unpack with >>>> $ tar zxf hsf*.tar.ggz >>>> and follow the instructions in the new folder exposed. >>>> >>>> You way be informed that it is also necessary to install from >>>> http://www.linuxant.com/alsa-driver/ the >>>> alsa-driver-linuxant_1.0.23.1_all.deb.zip , in which case. >>>> $ unzip driver*.zip >>>> $ dpkg -i driver *. deb >>>> and again start the hsfmodem install. >>>> >>>> If the is a mismatch between ALSA versions of the Linuxant and >>>> packages, you may lose audio support. >>>> But let's deal with that later. >>>> >>>> MarvS >>>> scanModem maintainer >>>> >>>> On Thu, Oct 6, 2011 at 2:08 PM, Antonio Rodulfo >>>> <antonio.rodulfo@xxxxxxxxx> wrote: >>>>> Dear Antonio, >>>>> >>>>> Thank you so much for your quick answer. >>>>> I have reviewed the options available at Linuxant's and, sadly, >>>>> there's no exact package for 2.38.11. In fact, the latest available >>>>> package seems to match 2.31.17. >>>>> Moreover, it seems to correspond to the x86, i.e., 32 bits kernel. >>>>> >>>>> As far as the web is concerned, I have two options: on the one hand, I >>>>> can download the available package and try to install and use it >>>>> (maybe I should cross my fingers?); on the other hand, I can download >>>>> the generic package and do my best (not that much, for the time being, >>>>> given my small experience) to get a proper driver compiled / >>>>> installed. >>>>> What would you recomend? >>>>> >>>>> In case I decide to use the generic package: >>>>> * is it enough for me to have the proper headers installed or do I >>>>> need to have the full kernel source? >>>>> * given the fact I'm using the 64 bits system, shouldn't I use the >>>>> x86_64 generic package? >>>>> >>>>> Thanks a lot in advance. >>>>> >>>>> -- >>>>> Un saludo, >>>>> Kind regards, >>>>> >>>>> Antonio Rodulfo >>>>> Ingeniero Industrial, Consultor de Proyectos >>>>> Industrial Engineer, Project Consultant >>>>> >>>>> >>>>> >>>>> 2011/10/6 Antonio Olivares <olivares14031@xxxxxxxxx>: >>>>>> Antonio, >>>>>> >>>>>> scanModem reports that your modem is supported by hsfmodem drivers. >>>>>> The snd_hda_intel driver is for sound and for certain modems supported >>>>>> by SLMODEMD variants. >>>>>> >>>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>>> Modem chipset detected on >>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition >>>>>> Audio Controller " >>>>>> CLASS=0403 >>>>>> PCIDEV=8086:27d8 >>>>>> SUBSYS=152d:0753 >>>>>> IRQ=46 >>>>>> HDA2=00:1b.0 >>>>>> SOFT=8086:27d8.HDA >>>>>> ArchivedChip=0x14f12bfa >>>>>> CodecClass=14f1 >>>>>> IDENT=hsfmodem >>>>>> Driver=hsfmodem-drivers >>>>>> >>>>>> For candidate modem in: 00:1b.0 >>>>>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High >>>>>> Definition Audio Controller >>>>>> Primary device ID: 8086:27d8 >>>>>> Subsystem PCI_id 152d:0753 >>>>>> Softmodem codec or chipset from diagnostics: >>>>>> from Archives: 0x14f12bfa >>>>>> >>>>>> >>>>>> >>>>>> Support type needed or chipset: hsfmodem >>>>>> >>>>>> >>>>>> Writing DOCs/Intel.txt >>>>>> >>>>>> For owners of a Dell PCs with Conexant HSF modems, a driver source >>>>>> package with full speed enabled is available, but requires driver >>>>>> compiling. Read DOCs/Conexant.txt >>>>>> >>>>>> >>>>>> Modem support packages from Linuxant include resources for compiling drivers. >>>>>> If an installer package matching your kernel_version is not provided, >>>>>> just install a generic code package. >>>>>> >>>>>> From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php >>>>>> download hsfmodem-7.80.02.05full_k2.6.38_11_generic_ubuntu_i386.deb.zip >>>>>> Under Linux unpack with: >>>>>> $ unzip hsfmodem*.zip >>>>>> Then install with: >>>>>> $ sudo dpkg -i hsfmodem*.deb >>>>>> Subsequently, the modem should be found with >>>>>> $ sudo wvdialconf /etc/wvdial.conf >>>>>> Edit in your personal information with: >>>>>> $ sudo gedit /etc/wvdial.conf >>>>>> and try dialing out with: >>>>>> $ sudo wvdial. >>>>>> See DOCs/Testing.txt for details. >>>>>> >>>>>> Download generic package: >>>>>> >>>>>> http://www.linuxant.com/drivers/hsf/full/archive/hsfmodem-7.80.02.06full/hsfmodem_7.80.02.06full_i386.deb.zip >>>>>> and follow instructions provided >>>>>> >>>>>> METHOD B: DEBIAN PACKAGE (*.deb) >>>>>> If you have obtained the driver package in DEBIAN format: >>>>>> >>>>>> 1. install the package with "dpkg -i hsfmodem_{version}_{arch}.deb", >>>>>> if apt-get or some other tool hasn't already done it for you. >>>>>> >>>>>> 2. if necessary, run "hsfconfig" to complete the installation, enter >>>>>> license information, or to change your modem's configuration. >>>>>> >>>>>> If you need to rebuild the Debian generic package from source, you can >>>>>> get the TAR package, and from the top directory run: "make debdist". A >>>>>> pre-compiled DEB package for the currently running kernel can be built >>>>>> using "make debprecomp" instead. >>>>>> >>>>>> http://www.linuxant.com/drivers/hsf/install.php >>>>>> >>>>>> Sadly you appear to also have a Modem Interrupt assignment which may >>>>>> affect the drivers, if you install the driver and your modem is >>>>>> nonresponsive please send us output of dmesg as it says here: >>>>>> >>>>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>>>> diagnostics are: >>>>>> PCI slot PCI ID SubsystemID Name >>>>>> ---------- --------- --------- -------------- >>>>>> 00:1b.0 8086:27d8 152d:0753 Audio device: Intel Corporation N10/ICH 7 >>>>>> Family High Definition Audio Controller >>>>>> >>>>>> Modem interrupt assignment and sharing: >>>>>> 46: 449 0 PCI-MSI-edge hda_intel >>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>>> [ 0.421621] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403 >>>>>> [ 0.421621] pci 0000:00:1b.0: reg 10: [mem 0xde300000-0xde303fff 64bit] >>>>>> [ 0.421621] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>>> [ 0.421621] pci 0000:00:1b.0: PME# disabled >>>>>> [ 13.536785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [ 13.536846] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [ 13.536874] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [46062.850301] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [46062.870026] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 129.960 msecs >>>>>> [46063.320332] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [46063.419918] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [46063.419930] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [46063.420029] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [51232.280187] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [51232.300025] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 128.907 msecs >>>>>> [51232.750333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [51232.849917] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [51232.849929] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [51232.850033] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [76807.210217] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [76807.230028] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 126.607 msecs >>>>>> [76807.760333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [76807.858066] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [76807.858078] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [76807.858155] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [87584.890190] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [87584.910024] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 122.420 msecs >>>>>> [87585.370333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [87585.461165] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [87585.461176] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [87585.461254] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [123722.470213] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [123722.490027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 125.325 msecs >>>>>> [123723.030325] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [123723.125473] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [123723.125486] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [123723.125563] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [171941.990190] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [171942.010031] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 129.819 msecs >>>>>> [171942.540332] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [171942.639816] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [171942.639828] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [171942.639901] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [219683.870202] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [219683.890029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 123.755 msecs >>>>>> [219684.470333] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [219684.570243] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [219684.570255] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [219684.570328] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [271116.110195] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [271116.130029] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 129.850 msecs >>>>>> [271116.630347] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [271116.727148] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [271116.727160] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [271116.727233] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [298911.650215] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [298911.670027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 128.981 msecs >>>>>> [298912.220335] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [298912.310282] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [298912.310294] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [298912.310367] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [350457.090193] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [350457.110027] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 123.903 msecs >>>>>> [350457.570330] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [350457.663155] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [350457.663167] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [350457.663241] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> [401399.270191] HDA Intel 0000:00:1b.0: PCI INT A disabled >>>>>> [401399.290040] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete >>>>>> after 125.578 msecs >>>>>> [401399.750334] HDA Intel 0000:00:1b.0: restoring config space at >>>>>> offset 0x1 (was 0x100006, writing 0x100002) >>>>>> [401399.850097] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, >>>>>> low) -> IRQ 22 >>>>>> [401399.850109] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>>> [401399.850180] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>>>>> >>>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>>>> a bootup process, but then enabled later. If modem drivers load >>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>>> if help is needed. >>>>>> >>>>>> >>>>>> Regards, >>>>>> >>>>>> Antonio >>>>>> >>>>>> On Thu, Oct 6, 2011 at 9:54 AM, Antonio Rodulfo >>>>>> <antonio.rodulfo@xxxxxxxxx> wrote: >>>>>>> Dear all, >>>>>>> >>>>>>> I've just dowloaded scanModem from your web page, uncompressed and >>>>>>> executed it in my system. >>>>>>> Attached you'll find the ModemData.txt it has just produced. >>>>>>> >>>>>>> I'm not "afraid" of the file and its contents. However, I can't >>>>>>> properly interpret it. It says "Potentially useful modem drivers now >>>>>>> loaded are: snd_hda_intel", but it doesn't conclude if the driver is >>>>>>> properly supporting the modem or not, nor have I any clue on how to >>>>>>> actually test it. >>>>>>> >>>>>>> Please help! >>>>>>> -- >>>>>>> Un saludo, >>>>>>> Kind regards, >>>>>>> >>>>>>> Antonio Rodulfo >>>>>>> Ingeniero Industrial, Consultor de Proyectos >>>>>>> Industrial Engineer, Project Consultant >>>>>>> >>>>>> >>>>> >>>> >>> >> >
driver version 7.80.02.06x86_64full (cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" clean) make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic' make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' (cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules/GPL/hda" "CC=gcc" "HDA_CFLAGS=-DFOUND_KZALLOC -DFOUND_TLV -DFOUND_IRQ_HANDLER_T -DFOUND_DELAYED_WORK -DFOUND_NO_CTL_ELEM_RW" clean) make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic' make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' rm -rf *.o GPL/*.o *.ko GPL/*.ko *.mod.c GPL/*.mod.c .*.cmd GPL/.*.cmd .tmp_versions .tmp_versions /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfosspec.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfserial.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfengine.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfpcibasic2.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfpcibasic3.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfhda.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ich.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97via.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ali.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97ati.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfmc97sis.mod /lib/modules/2.6.38-11-generic/build/.tmp_versions/hsfsoar.mod Modules.symvers GPL/hda/Modules.symvers Module.symvers GPL/hda/Module.symvers modules.order GPL/hda/modules.order Module.markers GPL/hda/Module.markers (cd /lib/modules/2.6.38-11-generic/build && make "CNXT_KERNELSRC=/lib/modules/2.6.38-11-generic/build" "M=/usr/lib/hsfmodem/modules" "CC=gcc" modules) make[1]: Entering directory `/usr/src/linux-headers-2.6.38-11-generic' CC [M] /usr/lib/hsfmodem/modules/mod_engine.o CC [M] /usr/lib/hsfmodem/modules/mod_hda.o CC [M] /usr/lib/hsfmodem/modules/mod_mc97ali.o CC [M] /usr/lib/hsfmodem/modules/mod_mc97ati.o CC [M] /usr/lib/hsfmodem/modules/mod_mc97ich.o CC [M] /usr/lib/hsfmodem/modules/mod_mc97sis.o CC [M] /usr/lib/hsfmodem/modules/mod_mc97via.o CC [M] /usr/lib/hsfmodem/modules/mod_osspec.o CC [M] /usr/lib/hsfmodem/modules/osservices.o /usr/lib/hsfmodem/modules/osservices.c: In function 'OsInit': /usr/lib/hsfmodem/modules/osservices.c:1287:80: warning: format '%d' expects type 'int', but argument 2 has type 'long unsigned int' /usr/lib/hsfmodem/modules/osservices.c:1287:80: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' /usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsRawVPrintf': /usr/lib/hsfmodem/modules/osservices.c:1320:1: warning: the frame size of 1040 bytes is larger than 1024 bytes /usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsErrorVPrintf': /usr/lib/hsfmodem/modules/osservices.c:1369:1: warning: the frame size of 1040 bytes is larger than 1024 bytes /usr/lib/hsfmodem/modules/osservices.c: In function 'cnxthsf_7800206x86_64full_OsDebugVPrintf': /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame size of 1040 bytes is larger than 1024 bytes CC [M] /usr/lib/hsfmodem/modules/osstdio.o CC [M] /usr/lib/hsfmodem/modules/osnvm.o /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here (not in a function) make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' make: *** [all] Error 2