CCH hsfmodem-7.80.02.06x86_64full.tar.gz near the bottom of http://www.linuxant.com/drivers/hsf/full/downloads.php is the support package needed for "Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP" USBmodemID=0572:1300 Under Ubuntu $ tar zxf hsf*.tar.gz and follow the instructions in the new folder. While the USB modem can be tested with this package, buying the software key is necessary to activate full speed service. After the drivers are installed, the modem should be detected by: $ sudo wvdialconf I'll have to update scanModem to optimize output for your case. email to the List (not me directly) if you need further helo MarvS scanModem maintaner On Sat, Oct 1, 2011 at 11:35 AM, Casimiro Casino Higo <spmk1975@xxxxxxxxx> wrote: > I send the modedata.txt file looking for help. As a new user of Ubuntu > 10, I don't understand well what this file means. I suppose I have a > Conexant chipset, then I would have to pay a license for a full modem > use. There is no > hsfmodem-7.80.02.05full_k2.6.32_24_generic_ubuntu_i386.deb.zip in the > linuxant page. > > My modem is a Conceptronic 56k usb voice/fax/modem C56U. It seems that > Ubuntu has not any option for 56k dial-up connections in the net > panel. I have downloaded and installed gnome-network-admin as the help > says but no tab for dial-up connections by now. > > Thanks for your help. > > ModemData.txt > > ----------- > > Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, > as HTML can contain viruses. Use as the email Subject Line: > YourName, YourCountry kernel 2.6.32-24-generic > With this Subject Line cogent experts will be alerted, and useful > case names left in the Archive. > YourCountry will enable Country specific guidance. Linux experts in > YourCountry > can be found through: http://www.linux.org/groups/index.html. > They will know your Country's modem code, which may be essential for > dialup service. > Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an > Internet Provider mail filters. > So in a day, also check the Archived responses at http://www.linmodems.org > -------------------------- System information ---------------------------- > CPU=x86_64, Ubuntu , ALSA_version=1.0.21 > Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 > (Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 05:14:15 UTC 2010 > scanModem update of: 2011_08_08 > > Distrib_ID=Ubuntu > DistribCodeName=lucid > AptRepositoryStem=http://es.archive.ubuntu.com/ubuntu/ > > > Presently install your Linux Distributions dkms package. It provides > for automated driver updates, > following upgrade of your kernel. For details see > http://linux.dell.com/projects.shtml#dkms > > > Some modem drivers can only be used in 32 bit modem on x86_64 systems, > while some others are competent on x86_64 Systems. Cases are: > 1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html > for the snd-hda-intel audio+modem driver. Also applicable to AC97 > modem controllers. > In both cases, 32 bit libraries must be installed to support the > slmodemd helper having a precompiled 32 bit component. > 2) For USB modems using the slusb.ko driver. 32 bit libraries must be > installed to support the slmodemd helper having a precompiled 32 bit > component > 3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes > are x86_64 competent. > 4) agrsm packages for LSI/AgereSystems softmodems are not competent on > x86_64 systems. > > There are no blacklisted modem drivers in /etc/modprobe* files > > Potentially useful modem drivers now loaded are: > snd_hda_intel > > Attached USB devices are: > ID 0572:1300 Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP > ID 04d9:1135 Holtek Semiconductor, Inc. > ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty > ID 14cd:8168 Super Top > ID 0718:0624 Imation Corp. > If a cellphone is not detected, see > http://ubuntuforums.org/archive/index.php/t-878554.html > A sample report is: > http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html > > If a USB modem or cellphone is attached and was not detected, please > provide available information in your request to discuss@xxxxxxxxxxxxx > > Candidate PCI devices with modem chips are: > 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High > Definition Audio Controller (rev 01) > High Definition Audio cards can host modem chips. > > For candidate card in slot 00:1b.0, firmware information and bootup > diagnostics are: > PCI slot PCI ID SubsystemID Name > ---------- --------- --------- -------------- > 00:1b.0 8086:27d8 1043:8445 Audio device: Intel Corporation N10/ICH 7 > Family High Definition Audio Controller > > Modem interrupt assignment and sharing: > 21: 629 245 IO-APIC-fasteoi HDA Intel > --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- > [ 0.336576] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf8000-0xfeafbfff] > [ 0.336610] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.336614] pci 0000:00:1b.0: PME# disabled > [ 8.701231] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, > low) -> IRQ 21 > [ 8.701349] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 8.857239] input: HDA Digital PCBeep as > /devices/pci0000:00/0000:00:1b.0/input/input6 > > The PCI slot 00:1b.0 of the modem card may be disabled early in > a bootup process, but then enabled later. If modem drivers load > but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. > Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx > if help is needed. > > > > ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== > The ALSA packages provide audio support and also drivers for some modems. > ALSA diagnostics are written during bootup to /proc/asound/ folders. > > The modem cards detected by "aplay -l" are: None > > > The /proc/asound/pcm file reports: > ----------------------- > 00-00: ALC887 Analog : ALC887 Analog : playback 1 : capture 1 > 00-01: ALC887 Digital : ALC887 Digital : playback 1 > 00-02: ALC887 Analog : ALC887 Analog : capture 1 > > about /proc/asound/cards: > ------------------------ > 0 [Intel ]: HDA-Intel - HDA Intel > HDA Intel at 0xfeaf8000 irq 21 > > PCI slot 00:1b.0 has a High Definition Audio Card > The drivers are in the kernel modules tree at: > /lib/modules/2.6.32-24-generic/kernel/sound/pci/hda/snd-hda-intel.ko > > The HDA diagnostics did not recognize a modem chip on the audio subsystem, > though a Conexant chip modem might not be recognized. > > === Finished firmware and bootup diagnostics, next deducing cogent software. === > > Predictive diagnostics for card in bus 003: > Modem chipset detected on > SLOT="Bus 003 Device 002:" > NAME="Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP" > bus=003 > USBmodemID=0572:1300 > IDENT=hsfmodem > Driver=hsfmodem > > For a detailed USB cellphone usage report, see > http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html > For candidate modem in: 003 > Conexant Systems (Rockwell), Inc. SoftK56 Data Fax Voice CARP > Primary device ID: 0572:1300 > Support type needed or chipset: hsfmodem > > > > Writing DOCs/Intel.txt > > For owners of a Dell PCs with Conexant HSF modems, a driver source > package with full speed enabled is available, but requires driver > compiling. Read DOCs/Conexant.txt > > > Modem support packages from Linuxant include resources for compiling drivers. > If an installer package matching your kernel_version is not provided, > just install a generic code package. > > From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php > download hsfmodem-7.80.02.05full_k2.6.32_24_generic_ubuntu_i386.deb.zip > Under Linux unpack with: > $ unzip hsfmodem*.zip > Then install with: > $ sudo dpkg -i hsfmodem*.deb > Subsequently, the modem should be found with > $ sudo wvdialconf /etc/wvdial.conf > Edit in your personal information with: > $ sudo gedit /etc/wvdial.conf > and try dialing out with: > $ sudo wvdial. > See DOCs/Testing.txt for details. > > The directions following below need only be pursued, if the above > procedures are not adequate. > > Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the > hsfmodem package matching your System. For several Linux distros, there are > precompiled drivers matched to specific kernels. These have within the FileName, > your KernelVersion: 2.6.32_24_generic > They can be found through > http://www.linuxant.com/drivers/hsf/full/downloads.php > A more precise location may be given a few paragraphs below. > If an EXACT Match with your your KernelVersion is not found, one of the > "Generic packages with source" near the bottom of the page must be used. > Downloaded packages must be moved into the Linux partition (home folder is OK) > and unzipped with: > unzip hsf*.zip > The installation command for a .deb suffic packages is, with root/adm > permission: > sudo dpkg -i hsf*.deb > while for .rpm suffix it is, with: > rpm -i hsf*.rpm > Read DOCs/Conexant.txt > > Writing DOCs/Conexant.txt > > > > Predictive diagnostics for card in bus 00:1b.0: > Modem chipset not detected on > NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition > Audio Controller " > CLASS=0403 > PCIDEV=8086:27d8 > SUBSYS=1043:8445 > IRQ=21 > HDA2=00:1b.0 > SOFT=8086:27d8.HDA > > For candidate modem in: 00:1b.0 > 0403 Audio device: Intel Corporation N10/ICH 7 Family High > Definition Audio Controller > Primary device ID: 8086:27d8 > Subsystem PCI_id 1043:8445 > Softmodem codec or chipset from diagnostics: > from Archives: > > > > Support type needed or chipset: > > Support can likely be achieved through two mutually exclusive alternatives: > 1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt > The following ALSA alternative CANNOT work with Conexant modems. > > 2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and > to test get the package SLMODEMD_gcc4.4_alsa1.0.21.tar.gz from: > http://linmodems.technion.ac.il/packages/smartlink/ > > > The base of the UDEV device file system is: /dev/.udev > > Versions adequately match for the compiler installed: 4.4.3 > and the compiler used in kernel assembly: 4.4.3 > > The patch utility is needed for compiling ALSA drivers, and possibly others. > > > Minimal compiling resources appear complete: > make utility - /usr/bin/make > Compiler version 4.4 > linuc_headers base folder /lib/modules/2.6.32-24-generic/build > > However some compilations and executable functions may need additional files, > in the FileNames.h (so called kernel "h"eaders) collection installed > in /usr/include/ . > For martian_modem, additional required packages are needed. The also > required headers of package libc6 are commonly installed by default. > Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev > packages, for kernels 2.6.24 and later versions. > In not included on your install CD, search for them at > http://packages.ubuntu.com > or comparable Repository for other Linux distros. > When compiling ALSA drivers, the utility "patch" will also be needed. > > > > > If a driver compilation fails, with message including some lack of > some FileName.h (stdio.h for example), then > Some additional kernel-header files need installation to /usr/include. > The minimal additional packages are libc6-dev > and any of its dependents, under Ubuntu linux-libc-dev > > If an alternate ethernet connection is available, > $ apt-get update > $ apt-get -s install linux-kernel-devel > will install needed packages. > For Debian/Ubuntu related distributions, run the following command to > display the needed package list: > > Otherwise packages have to be found through http://packages.ubuntu.com > Once downloaded and transferred into a Linux partition, > they can be installed alltogether with: > $ sudo dpkg -i *.deb > > > Checking pppd properties: > -rwsr-xr-- 1 root dip 321680 2010-03-07 06:37 /usr/sbin/pppd > > In case of an "error 17" "serial loopback" problem, see: > http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html > > To enable dialout without Root permission do: > $ su - root (not for Ubuntu) > sudo chmod a+x /usr/sbin/pppd > or under Ubuntu related Linuxes > sudo chmod a+x /usr/sbin/pppd > > Checking settings of: /etc/ppp/options > asyncmap 0 > noauth > crtscts > lock > hide-password > modem > proxyarp > lcp-echo-interval 30 > lcp-echo-failure 4 > noipx > > In case of a message like: > Warning: Could not modify /etc/ppp/pap-secrets: Permission denied > see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html > > For guidance on FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz > It has samples for a modem using port /dev/ttySL0, which must be > changed to match your modem's port. > > Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 > Which can interfere with Browser naviagation. > > Don't worry about the following, it is for experts should trouble > shooting be necessary. > ========================================================== > > Checking for modem support lines: > -------------------------------------- > /device/modem symbolic link: > slmodemd created symbolic link /dev/ttySL0: > Within /etc/udev/ files: > > Within /etc/modprobe.conf files: > /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 > /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 > /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in > order to blacklist unwanted modem drivers > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem > /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem > Within any ancient /etc/devfs files: > > Within ancient kernel 2.4.n /etc/module.conf files: > > --------- end modem support lines -------- >
