Nikolay, Please send to the List not directly to me, as others have more experience with the 11c10440 modem. The problem with hanging is common, sometimes there is a work around sometimes not. But with your: ------------ Modem interrupt assignment and sharing: 46: 544 537 PCI-MSI-edge hda_intel ---------- the first thing to try is to unload/stop functions which are sharing the same interrupt. For ARCH Linux, I can't advise how to thus proceed. I'm starting a road trip now and won't be back onto the PM. MarvS On Tue, Sep 6, 2011 at 1:26 PM, Nickolay Kozlov <knick@xxxxxxx> wrote: > Hi, Marvin! > Thank you for your help. I rolled back to my old backup with 2.6.38 kernel > and successfully compiled and loaded modem modules. > But, unfortunately, as Antonio wrote, when I try to launch wvdial, computer > freezes. It displays some text on screen (looks like dmesg output) and > doesn't respond. > Just wondering... Is support for 3.0 kernel planned in the future? >> >> Nick . Please try some series 2.6.38 or earlier kernel, which we are now >> supporting. It is not obvious what your Arch-3 kernel is, >> >> MarvS >> Sent from my Nokia phone >> -----Original Message----- >> From: Antonio Olivares >> Sent: 09/05/2011, 4:18 PM >> To: Nickolay Kozlov >> Cc:discuss@xxxxxxxxxxxxx >> Subject: Re: 11c11040 Agere/LSI, Nickolay Kozlov >> >> >> Nicolay, >> >> Output from dmesg shows: >> >> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel. >> [ 1252.792116] Disabling lock debugging due to kernel taint >> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0) >> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0) >> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0) >> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0) >> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0) >> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0) >> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0) >> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0) >> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0) >> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0) >> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0) >> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0) >> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0) >> >> >> In several reports, the modules load correctly, but when wvdialconf >> /etc/wvdial.conf is called, the computer freezes. Thank you for >> testing the package. Wish I could tell you more. You did change >> license to achieve successfull compilation, but now get these errors. >> You may try to force the loading of the modules, but then get back to >> issue in begining (freezing). >> >> Regards, >> >> Antonio >> >> On Mon, Sep 5, 2011 at 10:57 AM, Nickolay Kozlov<knick@xxxxxxx> wrote: >>> >>> Hello! >>> I have internal 11c11040 Nicolay, >> >> Output from dmesg shows: >> >> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel. >> [ 1252.792116] Disabling lock debugging due to kernel taint >> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0) >> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0) >> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0) >> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0) >> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0) >> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0) >> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0) >> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0) >> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0) >> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0) >> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0) >> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0) >> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0) >> >> >> In several reports, the modules load correctly, but when wvdialconf >> /etc/wvdial.conf is called, the computer freezes. Thank you for >> testing the package. Wish I could tell you more. You did change >> license to achieve successfull compilation, but now get these errors. >> You may try to force the loading of the modules, but then get back to >> issue in begining (freezing). >> >> Regards, >> >> Antonio >> >> On Mon, Sep 5, 2011 at 10:57 AM, Nickolay Kozlov<knick@xxxxxxx> wrote: >>> >>> Hello! >>> I have internal 11c11040 Agere modem in my notebook. Latest package >>> agrsm-11c11040-2.1.80-20110811.tar.bz2 compiles successfully, but when I >>> try >>> to modprobe agrmodem module I receive the following message: >>> FATAL: Error inserting agrmodem >>> (/lib/modules/3.0-ARCH/extra/agrmodem.ko): >>> Unknown symbol in module, or unknown parameter (see dmesg) >>> Any help would be appreciatted. Thanks in advance. >>> >>> scanModem output: >>> >>> Only plain text email is forwarded by theDiscuss@xxxxxxxxxxxxx List >>> Server, >>> as HTML can contain viruses. Use as the email Subject Line: >>> YourName, YourCountry [H [2J >>> Arch Linux kernel 3.0-ARCH >>> With this Subject Line cogent experts will be alerted, and useful case >>> names left in the Archive. >>> YourCountry will enable Country specific guidance. Linux experts in >>> YourCountry >>> can be found through:http://www.linux.org/groups/index.html. >>> They will know your Country's modem code, which may be essential for >>> dialup >>> service. >>> Responses fromDiscuss@xxxxxxxxxxxxx are sometimes blocked by an Internet >>> Provider mail filters. >>> So in a day, also check the Archived responses >>> athttp://www.linmodems.org >>> -------------------------- System information >>> ---------------------------- >>> CPU=i686, [H [2J >>> Arch , ALSA_version=1.0.24 >>> Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 >>> (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 >>> scanModem update of: 2011_08_08 >>> >>> /etc/lsb-release not found >>> >>> >>> The dkms driver upgrade utilities are installed, >>> >>> There are no blacklisted modem drivers in /etc/modprobe* files >>> >>> Potentially useful modem drivers now loaded are: >>> snd_hda_intel >>> >>> Attached USB devices are: >>> ID 174f:5931 Syntek >>> ID 0a5c:2101 Broadcom Corp. Bluetooth Controller >>> If a cellphone is not detected, see >>> http://ubuntuforums.org/archive/index.php/t-878554.html >>> A sample report is: >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>> >>> If a USB modem or cellphone is attached and was not detected, please >>> provide available information in your request todiscuss@xxxxxxxxxxxxx >>> >>> Candidate PCI devices with modem chips are: >>> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio >>> Controller (rev 03) >>> High Definition Audio cards can host modem chips. >>> >>> For candidate card in slot 00:1b.0, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 00:1b.0 8086:293e 144d:c521 Audio device: Intel Corporation >>> 82801I >>> >>> Modem interrupt assignment and sharing: >>> 46: 544 537 PCI-MSI-edge hda_intel >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>> [ 0.763899] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 >>> [ 0.763920] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff >>> 64bit] >>> [ 0.764001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.764005] pci 0000:00:1b.0: PME# disabled >>> [ 7.740686] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) >>> -> >>> IRQ 22 >>> [ 7.740774] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X >>> [ 7.740810] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> [ 7.791115] input: HDA Digital PCBeep as >>> /devices/pci0000:00/0000:00:1b.0/input/input8 >>> [ 7.877916] input: HDA Intel HDMI/DP as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 >>> [ 7.877992] input: HDA Intel Mic as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 >>> [ 7.878063] input: HDA Intel Headphone as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 >>> >>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible >>> fixes. >>> Send dmesg.txt along with ModemData.txt todiscuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> >>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== >>> The ALSA packages provide audio support and also drivers for some modems. >>> ALSA diagnostics are written during bootup to /proc/asound/ folders. >>> >>> The modem cards detected by "aplay -l" are: None >>> >>> >>> The /proc/asound/pcm file reports: >>> ----------------------- >>> 00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture 1 >>> 00-03: HDMI 0 : HDMI 0 : playback 1 >>> >>> about /proc/asound/cards: >>> ------------------------ >>> 0 [Intel ]: HDA-Intel - HDA Intel >>> HDA Intel at 0xf6700000 irq 46 >>> >>> PCI slot 00:1b.0 has a High Definition Audio Card >>> The drivers are in the kernel modules tree at: >>> >>> The modem codec file for the HDA card is: /proc/asound/card0/codec#1 >>> -------------------------------------------------------- >>> Codec: LSI ID 1040 >>> Address: 1 >>> MFG Function Id: 0x2 (unsol 1) >>> Vendor Id: 0x11c11040 >>> Subsystem Id: 0x2118144d >>> Revision Id: 0x100200 >>> Modem Function Group: 0x1 >>> >>> The audio card hosts a softmodem chip: 0x11c11040 >>> >>> The softmodem chip 11c11040 is hosted on the Subsytem of the High >>> Definition >>> Audio card, >>> and is supported by the AgereSystems/LSI driver pair agrmodem + >>> agrserial, >>> which is provided by >>> the most current package agrsm-11c11040-version at >>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>> >>> If not a Conexant modem, the driver agrsm with its dependent drivers: >>> >>> ---------- >>> provide audio + modem support with the modem chip residing on the >>> subsystem. >>> Any particular card can host any one of several soft modem chips. >>> >>> === Finished firmware and bootup diagnostics, next deducing cogent >>> software. >>> === >>> >>> Predictive diagnostics for card in bus 00:1b.0: >>> Modem chipset detected on >>> NAME="Audio device: Intel Corporation 82801I " >>> CLASS=0403 >>> PCIDEV=8086:293e >>> SUBSYS=144d:c521 >>> IRQ=46 >>> HDA2=00:1b.0 >>> SOFT=8086:293e.HDA >>> HDAchipVendorID=11c1 >>> CHIP=0x11c11040 >>> IDENT=agrsm >>> Driver=agrsm >>> package=agrsm-11c11040 >>> >>> For candidate modem in: 00:1b.0 >>> 0403 Audio device: Intel Corporation 82801I >>> Primary device ID: 8086:293e >>> Subsystem PCI_id 144d:c521 >>> Softmodem codec or chipset from diagnostics: 0x11c11040 >>> from Archives: >>> The HDA card softmodem chip is 0x11c11040 >>> >>> >>> Support type needed or chipset: agrsm >>> >>> >>> Writing DOCs/Intel.txt >>> >>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem + >>> agrserial >>> driver pair. >>> There are a few different chipsets which use this driver pair, but they >>> use >>> different code resources: >>> Chipsets KV* PackageNames (most current as of November >>> 2009) >>> >>> ---------------------------------------------------------------------------------------------- >>> 11c1:048c and 11c1:048f 2.6.29 >>> agrsm048pci-2.1.60_20100108_i386.deb or >>> agrsm048pci-2.1.60_20100108.tar.gz >>> 11c1:0620 2.6.31 >>> agrsm06pci-2.1.80_20100106_i386.deb >>> or agrsm06pci-2.1.80~20100106.tar.gz !! >>> 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb >>> or >>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !! >>> All available at: >>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>> Additionally there are; >>> automation& testing agrsm-tools_0.0.1_all.deb or >>> agrsm-tools-0.0.1-2.noarch.rpm >>> General background agrsm_howto.txt >>> >>> ------------------------------------------------------------------------------------------------ >>> * KV == latest kernel release with a reported success >>> !! Latest update with major credit to Nikolay Zhuravlev >>> But see conflict issue: >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html >>> For the 11c11040 chip with kernels 2.6.31 and later a change in a >>> modules >>> loading settingmay be necessary. >>> Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your >>> Distro), change the phrase: >>> options snd-hda-intel power_save=10 >>> to: >>> options snd-hda-intel power_save=0 >>> or the agrsm drivers will not function. For Ubuntu related systems this >>> can be done with: >>> $ sudo gedit /etc/modprobe.d/alsa-base.conf >>> >>> Report from Bjorn Wielens: >>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives >>> an error about the module_version symbol. Using: >>> # modprobe --force agrmodem >>> # modprobe --force agrserial >>> is necessary to load the drivers, and does not appear to cause ill >>> effects. >>> >>> >>> All of the above packages are dkms competent. This means that if your >>> Linux >>> distros dkms package >>> is previously installed, if provides for future updates matching >>> forthcoming >>> kernels. >>> >>> -------------- end Agere Systems section ------------------- >>> >>> Completed candidate modem analyses. >>> >>> A UDEV device file system is not active. >>> >>> Versions adequately match for the compiler installed: 4.6.1 >>> and the compiler used in kernel assembly: 4.6.1 >>> >>> linux-headers-3.0-ARCH resources needed for compiling are not manifestly >>> ready! >>> >>> If compiling is necessary packages must be installed, providing: >>> kernel-source-3.0-ARCH >>> >>> >>> If a driver compilation fails, with message including some lack of some >>> FileName.h (stdio.h for example), then >>> Some additional kernel-header files need installation to /usr/include. >>> The >>> minimal additional packages are libc6-dev >>> and any of its dependents, under Ubuntu linux-libc-dev >>> >>> If an alternate ethernet connection is available, >>> $ apt-get update >>> $ apt-get -s install linux-kernel-devel >>> will install needed packages. >>> For Debian/Ubuntu related distributions, run the following command to >>> display the needed package list: >>> >>> Otherwise packages have to be found throughhttp://packages.ubuntu.com >>> Once downloaded and transferred into a Linux partition, >>> they can be installed alltogether with: >>> $ sudo dpkg -i *.deb >>> >>> >>> Checking pppd properties: >>> -r-xr-xr-x 1 root root 265044 февр. 9 2011 /usr/sbin/pppd >>> >>> In case of an "error 17" "serial loopback" problem, see: >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>> >>> To enable dialout without Root permission do: >>> $ su - root (not for Ubuntu) >>> chmod a+x /usr/sbin/pppd >>> or under Ubuntu related Linuxes >>> chmod a+x /usr/sbin/pppd >>> >>> Checking settings of: /etc/ppp/options >>> asyncmap 0 >>> auth >>> crtscts >>> lock >>> hide-password >>> modem >>> proxyarp >>> lcp-echo-interval 30 >>> lcp-echo-failure 4 >>> noipx >>> >>> In case of a message like: >>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>> seehttp://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>> >>> For guidance on FAX usage, get from >>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz >>> It has samples for a modem using port /dev/ttySL0, which must be changed >>> to >>> match your modem's port. >>> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 pan1 >>> wlan0 >>> Which can interfere with Browser naviagation. >>> >>> Don't worry about the following, it is for experts should trouble >>> shooting >>> be necessary. >>> ========================================================== >>> >>> Checking for modem support lines: >>> -------------------------------------- >>> /device/modem symbolic link: >>> slmodemd created symbolic link /dev/ttySL0: >>> Within /etc/udev/ files: >>> >>> Within /etc/modprobe.conf files: >>> >>> Within any ancient /etc/devfs files: >>> >>> Within ancient kernel 2.4.n /etc/module.conf files: >>> >>> --------- end modem support lines -------- >>> >>> dmesg output: >>> >>> [ 0.000000] Initializing cgroup subsys cpuset >>> [ 0.000000] Initializing cgroup subsys cpu >>> [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version >>> 4.6.1 >>> 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 >>> [ 0.000000] BIOS-provided physical RAM map: >>> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e400 (usable) >>> [ 0.000000] BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) >>> [ 0.000000] BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable) >>> [ 0.000000] BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved) >>> [ 0.000000] BIOS-e820: 000000007d6a7000 - 000000007d7bd000 (usable) >>> [ 0.000000] BIOS-e820: 000000007d7bd000 - 000000007d80f000 (reserved) >>> [ 0.000000] BIOS-e820: 000000007d80f000 - 000000007d908000 (usable) >>> [ 0.000000] BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved) >>> [ 0.000000] BIOS-e820: 000000007db0f000 - 000000007db18000 (usable) >>> [ 0.000000] BIOS-e820: 000000007db18000 - 000000007db1f000 (reserved) >>> [ 0.000000] BIOS-e820: 000000007db1f000 - 000000007db64000 (usable) >>> [ 0.000000] BIOS-e820: 000000007db64000 - 000000007db9f000 (ACPI NVS) >>> [ 0.000000] BIOS-e820: 000000007db9f000 - 000000007dc00000 (ACPI >>> data) >>> [ 0.000000] BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved) >>> [ 0.000000] BIOS-e820: 000000007e000000 - 0000000080000000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) >>> [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) >>> [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! >>> [ 0.000000] DMI present. >>> [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Q310 >>> /Q310 , BIOS 10SU.MP01.20090121.HCW 01/21/2009 >>> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 >>> (usable) ==> (reserved) >>> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 >>> (usable) >>> [ 0.000000] last_pfn = 0x7db64 max_arch_pfn = 0x100000 >>> [ 0.000000] MTRR default type: uncachable >>> [ 0.000000] MTRR fixed ranges enabled: >>> [ 0.000000] 00000-9FFFF write-back >>> [ 0.000000] A0000-BFFFF uncachable >>> [ 0.000000] C0000-D3FFF write-protect >>> [ 0.000000] D4000-D7FFF uncachable >>> [ 0.000000] D8000-FFFFF write-protect >>> [ 0.000000] MTRR variable ranges enabled: >>> [ 0.000000] 0 base 07E000000 mask FFE000000 uncachable >>> [ 0.000000] 1 base 000000000 mask F80000000 write-back >>> [ 0.000000] 2 base 07DC00000 mask FFFC00000 uncachable >>> [ 0.000000] 3 disabled >>> [ 0.000000] 4 disabled >>> [ 0.000000] 5 disabled >>> [ 0.000000] 6 disabled >>> [ 0.000000] 7 disabled >>> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new >>> 0x7010600070106 >>> [ 0.000000] found SMP MP-table at [c00f7310] f7310 >>> [ 0.000000] initial memory mapped : 0 - 00c00000 >>> [ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384 >>> [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 >>> [ 0.000000] 0000000000 - 0000400000 page 4k >>> [ 0.000000] 0000400000 - 0037400000 page 2M >>> [ 0.000000] 0037400000 - 00377fe000 page 4k >>> [ 0.000000] kernel direct mapping tables up to 377fe000 @ >>> bfb000-c00000 >>> [ 0.000000] RAMDISK: 7d47a000 - 7d691000 >>> [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fdf73 >>> [ 0.000000] Move RAMDISK from 000000007d47a000 - 000000007d690f72 to >>> 375e7000 - 377fdf72 >>> [ 0.000000] ACPI: RSDP 000f7270 00024 (v02 PTLTD ) >>> [ 0.000000] ACPI: XSDT 7dbf85c1 00074 (v01 SECCSD LH43STAR 06040000 >>> LTP >>> 00000000) >>> [ 0.000000] ACPI: FACP 7dbe8000 000F4 (v03 INTEL CRESTLNE 06040000 >>> ALAN >>> 00000001) >>> [ 0.000000] ACPI: DSDT 7dbe9000 0652E (v02 Intel CANTIGA 06040000 >>> INTL >>> 20050624) >>> [ 0.000000] ACPI: FACS 7db9efc0 00040 >>> [ 0.000000] ACPI: HPET 7dbfed86 00038 (v01 INTEL CRESTLNE 06040000 >>> LOHR >>> 0000005A) >>> [ 0.000000] ACPI: MCFG 7dbfedbe 0003C (v01 INTEL CRESTLNE 06040000 >>> LOHR >>> 0000005A) >>> [ 0.000000] ACPI: APIC 7dbfedfa 00068 (v01 PTLTD ? APIC 06040000 >>> LTP >>> 00000000) >>> [ 0.000000] ACPI: BOOT 7dbfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 >>> LTP >>> 00000001) >>> [ 0.000000] ACPI: SLIC 7dbfee8a 00176 (v01 SECCSD LH43STAR 06040000 >>> LTP >>> 00000000) >>> [ 0.000000] ACPI: SSDT 7dbf865d 00093 (v01 BrtRef DD01BRT 00001000 >>> INTL >>> 20050624) >>> [ 0.000000] ACPI: SSDT 7dbe7000 005F9 (v01 PmRef CpuPm 00003000 >>> INTL >>> 20050624) >>> [ 0.000000] ACPI: SSDT 7dbe6000 00259 (v01 PmRef Cpu0Tst 00003000 >>> INTL >>> 20050624) >>> [ 0.000000] ACPI: SSDT 7dbe5000 0020F (v01 PmRef ApTst 00003000 >>> INTL >>> 20050624) >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] 1123MB HIGHMEM available. >>> [ 0.000000] 887MB LOWMEM available. >>> [ 0.000000] mapped low ram: 0 - 377fe000 >>> [ 0.000000] low ram: 0 - 377fe000 >>> [ 0.000000] Zone PFN ranges: >>> [ 0.000000] DMA 0x00000010 -> 0x00001000 >>> [ 0.000000] Normal 0x00001000 -> 0x000377fe >>> [ 0.000000] HighMem 0x000377fe -> 0x0007db64 >>> [ 0.000000] Movable zone start PFN for each node >>> [ 0.000000] early_node_map[6] active PFN ranges >>> [ 0.000000] 0: 0x00000010 -> 0x0000009e >>> [ 0.000000] 0: 0x00000100 -> 0x0007d6a1 >>> [ 0.000000] 0: 0x0007d6a7 -> 0x0007d7bd >>> [ 0.000000] 0: 0x0007d80f -> 0x0007d908 >>> [ 0.000000] 0: 0x0007db0f -> 0x0007db18 >>> [ 0.000000] 0: 0x0007db1f -> 0x0007db64 >>> [ 0.000000] On node 0 totalpages: 514188 >>> [ 0.000000] free_area_init_node: node 0, pgdat c05adc80, node_mem_map >>> f662e200 >>> [ 0.000000] DMA zone: 32 pages used for memmap >>> [ 0.000000] DMA zone: 0 pages reserved >>> [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 >>> [ 0.000000] Normal zone: 1744 pages used for memmap >>> [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 >>> [ 0.000000] HighMem zone: 2247 pages used for memmap >>> [ 0.000000] HighMem zone: 284729 pages, LIFO batch:31 >>> [ 0.000000] Using APIC driver default >>> [ 0.000000] ACPI: PM-Timer IO Port: 0x408 >>> [ 0.000000] ACPI: Local APIC address 0xfee00000 >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) >>> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) >>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) >>> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) >>> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) >>> [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI >>> 0-23 >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) >>> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high >>> level) >>> [ 0.000000] ACPI: IRQ0 used by override. >>> [ 0.000000] ACPI: IRQ2 used by override. >>> [ 0.000000] ACPI: IRQ9 used by override. >>> [ 0.000000] Using ACPI (MADT) for SMP configuration information >>> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 >>> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs >>> [ 0.000000] nr_irqs_gsi: 40 >>> [ 0.000000] PM: Registered nosave memory: 000000000009e000 - >>> 000000000009f000 >>> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - >>> 00000000000a0000 >>> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - >>> 00000000000dc000 >>> [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - >>> 0000000000100000 >>> [ 0.000000] Allocating PCI resources starting at 80000000 (gap: >>> 80000000:60000000) >>> [ 0.000000] Booting paravirtualized kernel on bare hardware >>> [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 >>> nr_node_ids:1 >>> [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680 >>> u2097152 >>> [ 0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304 >>> [ 0.000000] pcpu-alloc: [0] 0 1 >>> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. >>> Total >>> pages: 510165 >>> [ 0.000000] Kernel command line: root=/dev/sda4 ro >>> acpi_backlight=vendor >>> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) >>> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 >>> bytes) >>> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 >>> bytes) >>> [ 0.000000] Initializing CPU#0 >>> [ 0.000000] allocated 8238400 bytes of page_cgroup >>> [ 0.000000] please try 'cgroup_disable=memory' option if you don't >>> want >>> memory cgroups >>> [ 0.000000] Initializing HighMem for node 0 (000377fe:0007db64) >>> [ 0.000000] Memory: 2023248k/2059664k available (3415k kernel code, >>> 33504k reserved, 1407k data, 500k init, 1147904k highmem) >>> [ 0.000000] virtual kernel memory layout: >>> [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB) >>> [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) >>> [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) >>> [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) >>> [ 0.000000] .init : 0xc05b6000 - 0xc0633000 ( 500 kB) >>> [ 0.000000] .data : 0xc0455cd5 - 0xc05b5980 (1407 kB) >>> [ 0.000000] .text : 0xc0100000 - 0xc0455cd5 (3415 kB) >>> [ 0.000000] Checking if this processor honours the WP bit even in >>> supervisor mode...Ok. >>> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, >>> CPUs=2, Nodes=1 >>> [ 0.000000] Preemptible hierarchical RCU implementation. >>> [ 0.000000] Verbose stalled-CPUs detection is disabled. >>> [ 0.000000] NR_IRQS:512 >>> [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000 >>> [ 0.000000] Extended CMOS year: 2000 >>> [ 0.000000] Console: colour VGA+ 80x25 >>> [ 0.000000] console [tty0] enabled >>> [ 0.000000] hpet clockevent registered >>> [ 0.000000] Fast TSC calibration using PIT >>> [ 0.000000] Detected 2161.088 MHz processor. >>> [ 0.003337] Calibrating delay loop (skipped), value calculated using >>> timer frequency.. 4323.26 BogoMIPS (lpj=7203626) >>> [ 0.003342] pid_max: default: 32768 minimum: 301 >>> [ 0.003383] Security Framework initialized >>> [ 0.003389] AppArmor: AppArmor disabled by boot time parameter >>> [ 0.003409] Mount-cache hash table entries: 512 >>> [ 0.003616] Initializing cgroup subsys cpuacct >>> [ 0.003628] Initializing cgroup subsys memory >>> [ 0.003639] Initializing cgroup subsys devices >>> [ 0.003641] Initializing cgroup subsys freezer >>> [ 0.003643] Initializing cgroup subsys net_cls >>> [ 0.003645] Initializing cgroup subsys blkio >>> [ 0.003685] CPU: Physical Processor ID: 0 >>> [ 0.003687] CPU: Processor Core ID: 0 >>> [ 0.003690] mce: CPU supports 6 MCE banks >>> [ 0.003699] CPU0: Thermal monitoring enabled (TM2) >>> [ 0.003703] using mwait in idle threads. >>> [ 0.006743] ACPI: Core revision 20110413 >>> [ 0.013347] ftrace: allocating 15364 entries in 31 pages >>> [ 0.016716] Enabling APIC mode: Flat. Using 1 I/O APICs >>> [ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 >>> [ 0.053005] CPU0: Intel(R) Core(TM)2 Duo CPU T5850 @ 2.16GHz >>> stepping 0d >>> [ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU >>> driver. >>> [ 0.053330] PEBS disabled due to CPU errata. >>> [ 0.053330] ... version: 2 >>> [ 0.053330] ... bit width: 40 >>> [ 0.053330] ... generic registers: 2 >>> [ 0.053330] ... value mask: 000000ffffffffff >>> [ 0.053330] ... max period: 000000007fffffff >>> [ 0.053330] ... fixed-purpose events: 3 >>> [ 0.053330] ... event mask: 0000000700000003 >>> [ 0.070121] NMI watchdog enabled, takes one hw-pmu counter. >>> [ 0.096675] CPU 1 irqstacks, hard=f54ca000 soft=f54cc000 >>> [ 0.096677] Booting Node 0, Processors #1 Ok. >>> [ 0.096680] smpboot cpu 1: start_ip = 9a000 >>> [ 0.006666] Initializing CPU#1 >>> [ 0.193349] NMI watchdog enabled, takes one hw-pmu counter. >>> [ 0.199991] Brought up 2 CPUs >>> [ 0.199994] Total of 2 processors activated (8648.85 BogoMIPS). >>> [ 0.200907] devtmpfs: initialized >>> [ 0.200907] PM: Registering ACPI NVS region at 7db64000 (241664 bytes) >>> [ 0.201070] print_constraints: dummy: >>> [ 0.201127] NET: Registered protocol family 16 >>> [ 0.201235] ACPI: bus type pci registered >>> [ 0.201328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem >>> 0xe0000000-0xefffffff] (base 0xe0000000) >>> [ 0.201332] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in >>> E820 >>> [ 0.201334] PCI: Using MMCONFIG for extended config space >>> [ 0.201336] PCI: Using configuration type 1 for base access >>> [ 0.201828] bio: create slab<bio-0> at 0 >>> [ 0.204558] ACPI: EC: Look up EC in DSDT >>> [ 0.207733] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored >>> [ 0.209547] ACPI: SSDT 7db1ac20 00265 (v01 PmRef Cpu0Ist 00003000 >>> INTL >>> 20050624) >>> [ 0.209866] ACPI: Dynamic OEM Table Load: >>> [ 0.209869] ACPI: SSDT (null) 00265 (v01 PmRef Cpu0Ist 00003000 >>> INTL >>> 20050624) >>> [ 0.210074] ACPI: SSDT 7db18020 00C78 (v01 PmRef Cpu0Cst 00003001 >>> INTL >>> 20050624) >>> [ 0.210374] ACPI: Dynamic OEM Table Load: >>> [ 0.210377] ACPI: SSDT (null) 00C78 (v01 PmRef Cpu0Cst 00003001 >>> INTL >>> 20050624) >>> [ 0.230249] ACPI: SSDT 7db19ca0 001CF (v01 PmRef ApIst 00003000 >>> INTL >>> 20050624) >>> [ 0.230585] ACPI: Dynamic OEM Table Load: >>> [ 0.230588] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 >>> INTL >>> 20050624) >>> [ 0.240080] ACPI: SSDT 7db19f20 0008D (v01 PmRef ApCst 00003000 >>> INTL >>> 20050624) >>> [ 0.240394] ACPI: Dynamic OEM Table Load: >>> [ 0.240397] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 >>> INTL >>> 20050624) >>> [ 0.753336] ACPI: Interpreter enabled >>> [ 0.753347] ACPI: (supports S0 S3 S4 S5) >>> [ 0.753369] ACPI: Using IOAPIC for interrupt routing >>> [ 0.753742] [Firmware Bug]: ACPI: No _BQC method, cannot determine >>> initial brightness >>> [ 0.757641] ACPI: Power Resource [FN00] (off) >>> [ 0.757641] ACPI: Power Resource [FN01] (off) >>> [ 0.757641] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = >>> 0x62 >>> [ 0.757641] ACPI: No dock devices found. >>> [ 0.757641] HEST: Table not found. >>> [ 0.757641] PCI: Using host bridge windows from ACPI; if necessary, >>> use >>> "pci=nocrs" and report a bug >>> [ 0.757856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) >>> [ 0.758469] pci_root PNP0A08:00: host bridge window [io >>> 0x0000-0x0cf7] >>> [ 0.758472] pci_root PNP0A08:00: host bridge window [io >>> 0x0d00-0xffff] >>> [ 0.758475] pci_root PNP0A08:00: host bridge window [mem >>> 0x000a0000-0x000bffff] >>> [ 0.758478] pci_root PNP0A08:00: host bridge window [mem >>> 0x000d4000-0x000d7fff] >>> [ 0.758481] pci_root PNP0A08:00: host bridge window [mem >>> 0x000d8000-0x000dbfff] >>> [ 0.758484] pci_root PNP0A08:00: host bridge window [mem >>> 0x80000000-0xfebfffff] >>> [ 0.758499] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600 >>> [ 0.758526] DMAR: Forcing write-buffer flush capability >>> [ 0.758528] DMAR: Disabling IOMMU for graphics on this chipset >>> [ 0.758553] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300 >>> [ 0.758568] pci 0000:00:02.0: reg 10: [mem 0xf6000000-0xf63fffff >>> 64bit] >>> [ 0.758579] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit >>> pref] >>> [ 0.758586] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807] >>> [ 0.758623] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380 >>> [ 0.758636] pci 0000:00:02.1: reg 10: [mem 0xf6400000-0xf64fffff >>> 64bit] >>> [ 0.760028] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03 >>> [ 0.760088] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f] >>> [ 0.760149] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03 >>> [ 0.760210] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f] >>> [ 0.760270] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03 >>> [ 0.760330] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f] >>> [ 0.760403] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03 >>> [ 0.760431] pci 0000:00:1a.7: reg 10: [mem 0xf6704800-0xf6704bff] >>> [ 0.760526] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold >>> [ 0.760531] pci 0000:00:1a.7: PME# disabled >>> [ 0.760561] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403 >>> [ 0.760583] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff >>> 64bit] >>> [ 0.760663] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.760668] pci 0000:00:1b.0: PME# disabled >>> [ 0.760694] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604 >>> [ 0.760777] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold >>> [ 0.760782] pci 0000:00:1c.0: PME# disabled >>> [ 0.760812] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604 >>> [ 0.760895] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold >>> [ 0.760899] pci 0000:00:1c.2: PME# disabled >>> [ 0.760928] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604 >>> [ 0.761010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold >>> [ 0.761014] pci 0000:00:1c.3: PME# disabled >>> [ 0.761049] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03 >>> [ 0.761109] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f] >>> [ 0.761170] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03 >>> [ 0.761230] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf] >>> [ 0.761293] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03 >>> [ 0.761354] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df] >>> [ 0.761428] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03 >>> [ 0.761456] pci 0000:00:1d.7: reg 10: [mem 0xf6704c00-0xf6704fff] >>> [ 0.761549] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold >>> [ 0.761554] pci 0000:00:1d.7: PME# disabled >>> [ 0.761578] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 >>> [ 0.761657] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601 >>> [ 0.761793] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106 >>> [ 0.761821] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] >>> [ 0.761832] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] >>> [ 0.761844] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] >>> [ 0.761855] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] >>> [ 0.761867] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff] >>> [ 0.761879] pci 0000:00:1f.2: reg 24: [mem 0xf6704000-0xf67047ff] >>> [ 0.761929] pci 0000:00:1f.2: PME# supported from D3hot >>> [ 0.761933] pci 0000:00:1f.2: PME# disabled >>> [ 0.761955] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 >>> [ 0.761977] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff >>> 64bit] >>> [ 0.762008] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f] >>> [ 0.762120] pci 0000:02:00.0: [168c:001c] type 0 class 0x000200 >>> [ 0.762150] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff >>> 64bit] >>> [ 0.762264] pci 0000:02:00.0: PME# supported from D3hot >>> [ 0.762270] pci 0000:02:00.0: PME# disabled >>> [ 0.762299] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. >>> You >>> can enable it with 'pcie_aspm=force' >>> [ 0.762312] pci 0000:00:1c.0: PCI bridge to [bus 02-03] >>> [ 0.762317] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] >>> [ 0.762322] pci 0000:00:1c.0: bridge window [mem >>> 0xf3000000-0xf3ffffff] >>> [ 0.762330] pci 0000:00:1c.0: bridge window [mem >>> 0xf0000000-0xf0ffffff >>> 64bit pref] >>> [ 0.762388] pci 0000:00:1c.2: PCI bridge to [bus 04-05] >>> [ 0.762392] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] >>> [ 0.762398] pci 0000:00:1c.2: bridge window [mem >>> 0xf4000000-0xf4ffffff] >>> [ 0.762405] pci 0000:00:1c.2: bridge window [mem >>> 0xf1000000-0xf1ffffff >>> 64bit pref] >>> [ 0.762618] pci 0000:06:00.0: [11ab:4363] type 0 class 0x000200 >>> [ 0.762771] pci 0000:06:00.0: reg 10: [mem 0xf5000000-0xf5003fff >>> 64bit] >>> [ 0.762848] pci 0000:06:00.0: reg 18: [io 0x4000-0x40ff] >>> [ 0.763168] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] >>> [ 0.763469] pci 0000:06:00.0: supports D1 D2 >>> [ 0.763472] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot >>> D3cold >>> [ 0.763492] pci 0000:06:00.0: PME# disabled >>> [ 0.770004] pci 0000:00:1c.3: PCI bridge to [bus 06-07] >>> [ 0.770009] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] >>> [ 0.770013] pci 0000:00:1c.3: bridge window [mem >>> 0xf5000000-0xf5ffffff] >>> [ 0.770021] pci 0000:00:1c.3: bridge window [mem >>> 0xf2000000-0xf2ffffff >>> 64bit pref] >>> [ 0.770100] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive >>> decode) >>> [ 0.770105] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] >>> (disabled) >>> [ 0.770111] pci 0000:00:1e.0: bridge window [mem >>> 0xfff00000-0x000fffff] >>> (disabled) >>> [ 0.770118] pci 0000:00:1e.0: bridge window [mem >>> 0xfff00000-0x000fffff >>> pref] (disabled) >>> [ 0.770121] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] >>> (subtractive decode) >>> [ 0.770124] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] >>> (subtractive decode) >>> [ 0.770127] pci 0000:00:1e.0: bridge window [mem >>> 0x000a0000-0x000bffff] >>> (subtractive decode) >>> [ 0.770129] pci 0000:00:1e.0: bridge window [mem >>> 0x000d4000-0x000d7fff] >>> (subtractive decode) >>> [ 0.770132] pci 0000:00:1e.0: bridge window [mem >>> 0x000d8000-0x000dbfff] >>> (subtractive decode) >>> [ 0.770135] pci 0000:00:1e.0: bridge window [mem >>> 0x80000000-0xfebfffff] >>> (subtractive decode) >>> [ 0.770161] pci_bus 0000:00: on NUMA node 0 >>> [ 0.770164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] >>> [ 0.770402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] >>> [ 0.770459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] >>> [ 0.770506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] >>> [ 0.770562] pci0000:00: Requesting ACPI _OSC control (0x1d) >>> [ 0.770566] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), >>> returned control mask: 0x1d >>> [ 0.770567] ACPI _OSC control for PCIe not granted, disabling ASPM >>> [ 0.776207] ACPI: PCI Interrupt Link [LNKA] (IRQs *11) >>> [ 0.776254] ACPI: PCI Interrupt Link [LNKB] (IRQs *10) >>> [ 0.776300] ACPI: PCI Interrupt Link [LNKC] (IRQs *5) >>> [ 0.776345] ACPI: PCI Interrupt Link [LNKD] (IRQs *5) >>> [ 0.776389] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled. >>> [ 0.776438] ACPI: PCI Interrupt Link [LNKF] (IRQs *10) >>> [ 0.776483] ACPI: PCI Interrupt Link [LNKG] (IRQs *5) >>> [ 0.776527] ACPI: PCI Interrupt Link [LNKH] (IRQs *5) >>> [ 0.776610] vgaarb: device added: >>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none >>> [ 0.776630] vgaarb: loaded >>> [ 0.776632] vgaarb: bridge control possible 0000:00:02.0 >>> [ 0.776725] PCI: Using ACPI for IRQ routing >>> [ 0.786784] PCI: pci_cache_line_size set to 64 bytes >>> [ 0.786913] reserve RAM buffer: 000000000009e400 - 000000000009ffff >>> [ 0.786915] reserve RAM buffer: 000000007d6a1000 - 000000007fffffff >>> [ 0.786920] reserve RAM buffer: 000000007d7bd000 - 000000007fffffff >>> [ 0.786924] reserve RAM buffer: 000000007d908000 - 000000007fffffff >>> [ 0.786927] reserve RAM buffer: 000000007db18000 - 000000007fffffff >>> [ 0.786930] reserve RAM buffer: 000000007db64000 - 000000007fffffff >>> [ 0.787043] NetLabel: Initializing >>> [ 0.787045] NetLabel: domain hash size = 128 >>> [ 0.787047] NetLabel: protocols = UNLABELED CIPSOv4 >>> [ 0.787060] NetLabel: unlabeled traffic allowed by default >>> [ 0.787073] HPET: 4 timers in total, 0 timers will be used for per-cpu >>> timer >>> [ 0.787079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 >>> [ 0.787084] hpet0: 4 comparators, 64-bit 14.318180 MHz counter >>> [ 0.796633] Switching to clocksource hpet >>> [ 0.799865] Switched to NOHz mode on CPU #0 >>> [ 0.799922] Switched to NOHz mode on CPU #1 >>> [ 0.803406] pnp: PnP ACPI init >>> [ 0.803428] ACPI: bus type pnp registered >>> [ 0.803787] pnp 00:00: [bus 00-ff] >>> [ 0.803790] pnp 00:00: [io 0x0000-0x0cf7 window] >>> [ 0.803792] pnp 00:00: [io 0x0cf8-0x0cff] >>> [ 0.803795] pnp 00:00: [io 0x0d00-0xffff window] >>> [ 0.803797] pnp 00:00: [mem 0x000a0000-0x000bffff window] >>> [ 0.803799] pnp 00:00: [mem 0x000c0000-0x000c3fff window] >>> [ 0.803802] pnp 00:00: [mem 0x000c4000-0x000c7fff window] >>> [ 0.803804] pnp 00:00: [mem 0x000c8000-0x000cbfff window] >>> [ 0.803806] pnp 00:00: [mem 0x000cc000-0x000cffff window] >>> [ 0.803808] pnp 00:00: [mem 0x000d0000-0x000d3fff window] >>> [ 0.803811] pnp 00:00: [mem 0x000d4000-0x000d7fff window] >>> [ 0.803813] pnp 00:00: [mem 0x000d8000-0x000dbfff window] >>> [ 0.803815] pnp 00:00: [mem 0x000dc000-0x000dffff window] >>> [ 0.803817] pnp 00:00: [mem 0x000e0000-0x000e3fff window] >>> [ 0.803820] pnp 00:00: [mem 0x000e4000-0x000e7fff window] >>> [ 0.803822] pnp 00:00: [mem 0x000e8000-0x000ebfff window] >>> [ 0.803824] pnp 00:00: [mem 0x000ec000-0x000effff window] >>> [ 0.803826] pnp 00:00: [mem 0x000f0000-0x000fffff window] >>> [ 0.803829] pnp 00:00: [mem 0x80000000-0xfebfffff window] >>> [ 0.803831] pnp 00:00: [mem 0xfed40000-0xfed44fff window] >>> [ 0.803911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 >>> (active) >>> [ 0.804097] pnp 00:01: [io 0x0000-0x001f] >>> [ 0.804100] pnp 00:01: [io 0x0081-0x0091] >>> [ 0.804102] pnp 00:01: [io 0x0093-0x009f] >>> [ 0.804104] pnp 00:01: [io 0x00c0-0x00df] >>> [ 0.804106] pnp 00:01: [dma 4] >>> [ 0.804139] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) >>> [ 0.804148] pnp 00:02: [mem 0xff000000-0xffffffff] >>> [ 0.804179] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) >>> [ 0.804249] pnp 00:03: [mem 0xfed00000-0xfed003ff] >>> [ 0.804315] system 00:03: [mem 0xfed00000-0xfed003ff] has been >>> reserved >>> [ 0.804318] system 00:03: Plug and Play ACPI device, IDs PNP0103 >>> PNP0c01 >>> (active) >>> [ 0.804330] pnp 00:04: [io 0x00f0] >>> [ 0.804342] pnp 00:04: [irq 13] >>> [ 0.804378] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) >>> [ 0.804391] pnp 00:05: [io 0x002e-0x002f] >>> [ 0.804393] pnp 00:05: [io 0x004e-0x004f] >>> [ 0.804395] pnp 00:05: [io 0x0061] >>> [ 0.804397] pnp 00:05: [io 0x0063] >>> [ 0.804399] pnp 00:05: [io 0x0065] >>> [ 0.804403] pnp 00:05: [io 0x0067] >>> [ 0.804405] pnp 00:05: [io 0x0070] >>> [ 0.804407] pnp 00:05: [io 0x0080] >>> [ 0.804409] pnp 00:05: [io 0x0092] >>> [ 0.804410] pnp 00:05: [io 0x00b2-0x00b3] >>> [ 0.804412] pnp 00:05: [io 0x0680-0x069f] >>> [ 0.804415] pnp 00:05: [io 0x0480-0x048f] >>> [ 0.804417] pnp 00:05: [io 0xffff] >>> [ 0.804419] pnp 00:05: [io 0xffff] >>> [ 0.804420] pnp 00:05: [io 0x0400-0x047f] >>> [ 0.804422] pnp 00:05: [io 0x0480-0x048f] >>> [ 0.804424] pnp 00:05: [io 0x1180-0x11ff] >>> [ 0.804426] pnp 00:05: [io 0x164e-0x164f] >>> [ 0.804428] pnp 00:05: [io 0x5000-0x500f] >>> [ 0.804430] pnp 00:05: [io 0xfe00] >>> [ 0.804494] system 00:05: [io 0x0680-0x069f] has been reserved >>> [ 0.804497] system 00:05: [io 0x0480-0x048f] has been reserved >>> [ 0.804500] system 00:05: [io 0xffff] has been reserved >>> [ 0.804503] system 00:05: [io 0xffff] has been reserved >>> [ 0.804505] system 00:05: [io 0x0400-0x047f] has been reserved >>> [ 0.804508] system 00:05: [io 0x0480-0x048f] has been reserved >>> [ 0.804511] system 00:05: [io 0x1180-0x11ff] has been reserved >>> [ 0.804513] system 00:05: [io 0x164e-0x164f] has been reserved >>> [ 0.804516] system 00:05: [io 0x5000-0x500f] has been reserved >>> [ 0.804518] system 00:05: [io 0xfe00] has been reserved >>> [ 0.804522] system 00:05: Plug and Play ACPI device, IDs PNP0c02 >>> (active) >>> [ 0.804544] pnp 00:06: [io 0x06a0-0x06af] >>> [ 0.804546] pnp 00:06: [io 0x06b0-0x06ff] >>> [ 0.804596] system 00:06: [io 0x06a0-0x06af] has been reserved >>> [ 0.804599] system 00:06: [io 0x06b0-0x06ff] has been reserved >>> [ 0.804602] system 00:06: Plug and Play ACPI device, IDs PNP0c02 >>> (active) >>> [ 0.804612] pnp 00:07: [io 0x0070-0x0077] >>> [ 0.804618] pnp 00:07: [irq 8] >>> [ 0.804650] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) >>> [ 0.804661] pnp 00:08: [io 0x0060] >>> [ 0.804663] pnp 00:08: [io 0x0064] >>> [ 0.804669] pnp 00:08: [irq 1] >>> [ 0.804705] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) >>> [ 0.804718] pnp 00:09: [irq 12] >>> [ 0.804751] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active) >>> [ 0.804878] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] >>> [ 0.804881] pnp 00:0a: [mem 0xfed10000-0xfed13fff] >>> [ 0.804883] pnp 00:0a: [mem 0xfed18000-0xfed18fff] >>> [ 0.804885] pnp 00:0a: [mem 0xfed19000-0xfed19fff] >>> [ 0.804887] pnp 00:0a: [mem 0xe0000000-0xefffffff] >>> [ 0.804889] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] >>> [ 0.804891] pnp 00:0a: [mem 0xfed40000-0xfed44fff] >>> [ 0.804893] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] >>> [ 0.804955] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been >>> reserved >>> [ 0.804958] system 00:0a: [mem 0xfed10000-0xfed13fff] has been >>> reserved >>> [ 0.804961] system 00:0a: [mem 0xfed18000-0xfed18fff] has been >>> reserved >>> [ 0.804964] system 00:0a: [mem 0xfed19000-0xfed19fff] has been >>> reserved >>> [ 0.804967] system 00:0a: [mem 0xe0000000-0xefffffff] has been >>> reserved >>> [ 0.804970] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been >>> reserved >>> [ 0.804973] system 00:0a: [mem 0xfed40000-0xfed44fff] has been >>> reserved >>> [ 0.804975] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been >>> reserved >>> [ 0.804979] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 >>> (active) >>> [ 0.805273] pnp: PnP ACPI: found 11 devices >>> [ 0.805275] ACPI: ACPI bus type pnp unregistered >>> [ 0.841652] PCI: max bus depth: 1 pci_try_num: 2 >>> [ 0.841697] pci 0000:00:1f.3: BAR 0: assigned [mem >>> 0x80000000-0x800000ff >>> 64bit] >>> [ 0.841706] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff >>> 64bit] (PCI address [0x80000000-0x800000ff]) >>> [ 0.841710] pci 0000:00:1c.0: PCI bridge to [bus 02-03] >>> [ 0.841713] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] >>> [ 0.841720] pci 0000:00:1c.0: bridge window [mem >>> 0xf3000000-0xf3ffffff] >>> [ 0.841725] pci 0000:00:1c.0: bridge window [mem >>> 0xf0000000-0xf0ffffff >>> 64bit pref] >>> [ 0.841732] pci 0000:00:1c.2: PCI bridge to [bus 04-05] >>> [ 0.841736] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff] >>> [ 0.841742] pci 0000:00:1c.2: bridge window [mem >>> 0xf4000000-0xf4ffffff] >>> [ 0.841748] pci 0000:00:1c.2: bridge window [mem >>> 0xf1000000-0xf1ffffff >>> 64bit pref] >>> [ 0.841756] pci 0000:06:00.0: BAR 6: assigned [mem >>> 0xf2000000-0xf201ffff >>> pref] >>> [ 0.841759] pci 0000:00:1c.3: PCI bridge to [bus 06-07] >>> [ 0.841762] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff] >>> [ 0.841768] pci 0000:00:1c.3: bridge window [mem >>> 0xf5000000-0xf5ffffff] >>> [ 0.841773] pci 0000:00:1c.3: bridge window [mem >>> 0xf2000000-0xf2ffffff >>> 64bit pref] >>> [ 0.841781] pci 0000:00:1e.0: PCI bridge to [bus 08-08] >>> [ 0.841783] pci 0000:00:1e.0: bridge window [io disabled] >>> [ 0.841788] pci 0000:00:1e.0: bridge window [mem disabled] >>> [ 0.841793] pci 0000:00:1e.0: bridge window [mem pref disabled] >>> [ 0.841811] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> >>> IRQ 17 >>> [ 0.841817] pci 0000:00:1c.0: setting latency timer to 64 >>> [ 0.841826] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> >>> IRQ 18 >>> [ 0.841831] pci 0000:00:1c.2: setting latency timer to 64 >>> [ 0.841840] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> >>> IRQ 19 >>> [ 0.841845] pci 0000:00:1c.3: setting latency timer to 64 >>> [ 0.841853] pci 0000:00:1e.0: setting latency timer to 64 >>> [ 0.841857] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] >>> [ 0.841860] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] >>> [ 0.841862] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] >>> [ 0.841865] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] >>> [ 0.841867] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] >>> [ 0.841870] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff] >>> [ 0.841872] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] >>> [ 0.841875] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff] >>> [ 0.841877] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff >>> 64bit >>> pref] >>> [ 0.841880] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] >>> [ 0.841882] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff] >>> [ 0.841885] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff >>> 64bit >>> pref] >>> [ 0.841887] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff] >>> [ 0.841890] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff] >>> [ 0.841892] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff >>> 64bit >>> pref] >>> [ 0.841895] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] >>> [ 0.841897] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] >>> [ 0.841899] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] >>> [ 0.841902] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff] >>> [ 0.841904] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff] >>> [ 0.841907] pci_bus 0000:08: resource 9 [mem 0x80000000-0xfebfffff] >>> [ 0.841953] NET: Registered protocol family 2 >>> [ 0.842026] IP route cache hash table entries: 32768 (order: 5, 131072 >>> bytes) >>> [ 0.842275] TCP established hash table entries: 131072 (order: 8, >>> 1048576 >>> bytes) >>> [ 0.842816] TCP bind hash table entries: 65536 (order: 7, 524288 >>> bytes) >>> [ 0.843051] TCP: Hash tables configured (established 131072 bind >>> 65536) >>> [ 0.843053] TCP reno registered >>> [ 0.843056] UDP hash table entries: 512 (order: 2, 16384 bytes) >>> [ 0.843065] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) >>> [ 0.843176] NET: Registered protocol family 1 >>> [ 0.843193] pci 0000:00:02.0: Boot video device >>> [ 0.843395] PCI: CLS 64 bytes, default 64 >>> [ 0.843454] Unpacking initramfs... >>> [ 0.880093] Freeing initrd memory: 2140k freed >>> [ 0.881141] Simple Boot Flag at 0x37 set to 0x1 >>> [ 0.881441] apm: BIOS not found. >>> [ 0.881611] audit: initializing netlink socket (disabled) >>> [ 0.881625] type=2000 audit(1315248361.879:1): initialized >>> [ 0.886302] highmem bounce pool size: 64 pages >>> [ 0.886308] HugeTLB registered 4 MB page size, pre-allocated 0 pages >>> [ 0.895724] VFS: Disk quotas dquot_6.5.2 >>> [ 0.895812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) >>> [ 0.895922] msgmni has been set to 1713 >>> [ 0.896120] Block layer SCSI generic (bsg) driver version 0.4 loaded >>> (major 253) >>> [ 0.896151] io scheduler noop registered >>> [ 0.896153] io scheduler deadline registered >>> [ 0.896165] io scheduler cfq registered (default) >>> [ 0.896298] pcieport 0000:00:1c.0: setting latency timer to 64 >>> [ 0.896351] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X >>> [ 0.896430] pcieport 0000:00:1c.2: setting latency timer to 64 >>> [ 0.896478] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X >>> [ 0.896552] pcieport 0000:00:1c.3: setting latency timer to 64 >>> [ 0.896600] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X >>> [ 0.896813] intel_idle: MWAIT substates: 0x22220 >>> [ 0.896815] intel_idle: does not run on family 6 model 15 >>> [ 0.896821] ERST: Table is not found! >>> [ 0.896835] isapnp: Scanning for PnP cards... >>> [ 1.253172] isapnp: No Plug& Play device found >>> [ 1.253235] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled >>> [ 1.440435] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at >>> 0x60,0x64 irq 1,12 >>> [ 1.442918] i8042: Detected active multiplexing controller, rev 1.1 >>> [ 1.444044] serio: i8042 KBD port at 0x60,0x64 irq 1 >>> [ 1.444079] serio: i8042 AUX0 port at 0x60,0x64 irq 12 >>> [ 1.444106] serio: i8042 AUX1 port at 0x60,0x64 irq 12 >>> [ 1.444132] serio: i8042 AUX2 port at 0x60,0x64 irq 12 >>> [ 1.444164] serio: i8042 AUX3 port at 0x60,0x64 irq 12 >>> [ 1.444251] mousedev: PS/2 mouse device common for all mice >>> [ 1.444441] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 >>> [ 1.444469] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet >>> irqs >>> [ 1.444490] cpuidle: using governor ladder >>> [ 1.444492] cpuidle: using governor menu >>> [ 1.444735] TCP cubic registered >>> [ 1.444738] NET: Registered protocol family 17 >>> [ 1.444745] Registering the dns_resolver key type >>> [ 1.444760] Using IPI No-Shortcut mode >>> [ 1.444841] PM: Hibernation image not present or could not be loaded. >>> [ 1.444846] registered taskstats version 1 >>> [ 1.449119] rtc_cmos 00:07: setting system clock to 2011-09-05 >>> 18:46:02 >>> UTC (1315248362) >>> [ 1.449209] Initializing network drop monitor service >>> [ 1.449294] Freeing unused kernel memory: 500k freed >>> [ 1.449509] Write protecting the kernel text: 3416k >>> [ 1.449533] Write protecting the kernel read-only data: 1036k >>> [ 1.462206] udevd[58]: starting version 173 >>> [ 1.472616] input: AT Translated Set 2 keyboard as >>> /devices/platform/i8042/serio0/input/input0 >>> [ 1.486999] usbcore: registered new interface driver usbfs >>> [ 1.487029] usbcore: registered new interface driver hub >>> [ 1.499718] usbcore: registered new device driver usb >>> [ 1.505879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver >>> [ 1.505915] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) >>> -> >>> IRQ 19 >>> [ 1.505938] ehci_hcd 0000:00:1a.7: setting latency timer to 64 >>> [ 1.505943] ehci_hcd 0000:00:1a.7: EHCI Host Controller >>> [ 1.505978] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned >>> bus >>> number 1 >>> [ 1.506012] ehci_hcd 0000:00:1a.7: debug port 1 >>> [ 1.520660] ehci_hcd 0000:00:1a.7: cache line size of 64 is not >>> supported >>> [ 1.520687] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6704800 >>> [ 1.538108] SCSI subsystem initialized >>> [ 1.546834] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 >>> [ 1.546995] hub 1-0:1.0: USB hub found >>> [ 1.547001] hub 1-0:1.0: 6 ports detected >>> [ 1.547104] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> [ 1.547126] ehci_hcd 0000:00:1d.7: setting latency timer to 64 >>> [ 1.547130] ehci_hcd 0000:00:1d.7: EHCI Host Controller >>> [ 1.547140] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned >>> bus >>> number 2 >>> [ 1.547170] ehci_hcd 0000:00:1d.7: debug port 1 >>> [ 1.550183] libata version 3.00 loaded. >>> [ 1.551067] ehci_hcd 0000:00:1d.7: cache line size of 64 is not >>> supported >>> [ 1.551088] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6704c00 >>> [ 1.563355] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 >>> [ 1.563518] hub 2-0:1.0: USB hub found >>> [ 1.563523] hub 2-0:1.0: 6 ports detected >>> [ 1.563616] ahci 0000:00:1f.2: version 3.0 >>> [ 1.563633] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> >>> IRQ 19 >>> [ 1.563690] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X >>> [ 1.563773] ahci: SSS flag set, parallel bus scan disabled >>> [ 1.563814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps >>> 0x33 impl SATA mode >>> [ 1.563818] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo >>> pio >>> slum part ccc ems sxs >>> [ 1.563824] ahci 0000:00:1f.2: setting latency timer to 64 >>> [ 1.583998] scsi0 : ahci >>> [ 1.584102] scsi1 : ahci >>> [ 1.584177] scsi2 : ahci >>> [ 1.584249] scsi3 : ahci >>> [ 1.584322] scsi4 : ahci >>> [ 1.584397] scsi5 : ahci >>> [ 1.584462] ata1: SATA max UDMA/133 abar m2048@0xf6704000 port >>> 0xf6704100 >>> irq 43 >>> [ 1.584466] ata2: SATA max UDMA/133 abar m2048@0xf6704000 port >>> 0xf6704180 >>> irq 43 >>> [ 1.584468] ata3: DUMMY >>> [ 1.584470] ata4: DUMMY >>> [ 1.584472] ata5: SATA max UDMA/133 abar m2048@0xf6704000 port >>> 0xf6704300 >>> irq 43 >>> [ 1.584476] ata6: SATA max UDMA/133 abar m2048@0xf6704000 port >>> 0xf6704380 >>> irq 43 >>> [ 1.592366] uhci_hcd: USB Universal Host Controller Interface driver >>> [ 1.592434] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) >>> -> >>> IRQ 16 >>> [ 1.592444] uhci_hcd 0000:00:1a.0: setting latency timer to 64 >>> [ 1.592448] uhci_hcd 0000:00:1a.0: UHCI Host Controller >>> [ 1.592460] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned >>> bus >>> number 3 >>> [ 1.592506] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820 >>> [ 1.592668] hub 3-0:1.0: USB hub found >>> [ 1.592672] hub 3-0:1.0: 2 ports detected >>> [ 1.592752] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) >>> -> >>> IRQ 21 >>> [ 1.592758] uhci_hcd 0000:00:1a.1: setting latency timer to 64 >>> [ 1.592762] uhci_hcd 0000:00:1a.1: UHCI Host Controller >>> [ 1.592770] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned >>> bus >>> number 4 >>> [ 1.592806] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 >>> [ 1.592939] hub 4-0:1.0: USB hub found >>> [ 1.592943] hub 4-0:1.0: 2 ports detected >>> [ 1.593020] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) >>> -> >>> IRQ 19 >>> [ 1.593028] uhci_hcd 0000:00:1a.2: setting latency timer to 64 >>> [ 1.593031] uhci_hcd 0000:00:1a.2: UHCI Host Controller >>> [ 1.593038] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned >>> bus >>> number 5 >>> [ 1.593066] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860 >>> [ 1.593196] hub 5-0:1.0: USB hub found >>> [ 1.593201] hub 5-0:1.0: 2 ports detected >>> [ 1.593271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) >>> -> >>> IRQ 23 >>> [ 1.593280] uhci_hcd 0000:00:1d.0: setting latency timer to 64 >>> [ 1.593283] uhci_hcd 0000:00:1d.0: UHCI Host Controller >>> [ 1.593291] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned >>> bus >>> number 6 >>> [ 1.593318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880 >>> [ 1.593473] hub 6-0:1.0: USB hub found >>> [ 1.593481] hub 6-0:1.0: 2 ports detected >>> [ 1.593553] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) >>> -> >>> IRQ 19 >>> [ 1.593560] uhci_hcd 0000:00:1d.1: setting latency timer to 64 >>> [ 1.593564] uhci_hcd 0000:00:1d.1: UHCI Host Controller >>> [ 1.593571] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned >>> bus >>> number 7 >>> [ 1.593598] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0 >>> [ 1.593730] hub 7-0:1.0: USB hub found >>> [ 1.593734] hub 7-0:1.0: 2 ports detected >>> [ 1.593805] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) >>> -> >>> IRQ 18 >>> [ 1.593812] uhci_hcd 0000:00:1d.2: setting latency timer to 64 >>> [ 1.593815] uhci_hcd 0000:00:1d.2: UHCI Host Controller >>> [ 1.593823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned >>> bus >>> number 8 >>> [ 1.593858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0 >>> [ 1.593991] hub 8-0:1.0: USB hub found >>> [ 1.593995] hub 8-0:1.0: 2 ports detected >>> [ 1.853355] usb 1-3: new high speed USB device number 2 using ehci_hcd >>> [ 1.883353] Refined TSC clocksource calibration: 2161.249 MHz. >>> [ 1.883358] Switching to clocksource tsc >>> [ 1.903355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> [ 1.910290] ata1.00: ATA-8: SAMSUNG HM250JI, HS100-06, max UDMA7 >>> [ 1.910293] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth >>> 31/32), AA >>> [ 1.917293] ata1.00: configured for UDMA/133 >>> [ 1.917425] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM250JI >>> HS10 PQ: 0 ANSI: 5 >>> [ 2.236685] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) >>> [ 2.237177] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC05, max >>> UDMA/100 >>> [ 2.237181] ata2.00: applying bridge limits >>> [ 2.238190] ata2.00: configured for UDMA/100 >>> [ 2.241329] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633A >>> SC05 PQ: 0 ANSI: 5 >>> [ 2.560020] ata5: SATA link down (SStatus 0 SControl 300) >>> [ 2.823345] usb 8-2: new full speed USB device number 2 using uhci_hcd >>> [ 2.880017] ata6: SATA link down (SStatus 0 SControl 300) >>> [ 2.886320] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 >>> GB/232 GiB) >>> [ 2.886370] sd 0:0:0:0: [sda] Write Protect is off >>> [ 2.886373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 >>> [ 2.886395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: >>> enabled, >>> doesn't support DPO or FUA >>> [ 2.918787] sda: sda1 sda2 sda3 sda4 >>> [ 2.919129] sd 0:0:0:0: [sda] Attached SCSI disk >>> [ 2.924124] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw >>> xa/form2 >>> cdda tray >>> [ 2.924129] cdrom: Uniform CD-ROM driver Revision: 3.20 >>> [ 2.924305] sr 1:0:0:0: Attached scsi CD-ROM sr0 >>> [ 3.607096] EXT4-fs (sda4): mounted filesystem with ordered data mode. >>> Opts: (null) >>> [ 5.230165] udevd[290]: starting version 173 >>> [ 5.518200] ACPI: acpi_idle registered with cpuidle >>> [ 5.520415] Monitor-Mwait will be used to enter C-1 state >>> [ 5.520443] Monitor-Mwait will be used to enter C-2 state >>> [ 5.520467] Monitor-Mwait will be used to enter C-3 state >>> [ 5.520473] Marking TSC unstable due to TSC halts in idle >>> [ 5.520502] Switching to clocksource hpet >>> [ 5.953359] input: Lid Switch as >>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 >>> [ 5.953411] ACPI: Lid Switch [LID0] >>> [ 5.953486] input: Power Button as >>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 >>> [ 5.953493] ACPI: Power Button [PWRB] >>> [ 5.953547] input: Sleep Button as >>> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 >>> [ 5.953551] ACPI: Sleep Button [SLPB] >>> [ 5.953598] input: Power Button as >>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 >>> [ 5.953602] ACPI: Power Button [PWRF] >>> [ 5.956873] ACPI: Deprecated procfs I/F for AC is loaded, please retry >>> with CONFIG_ACPI_PROCFS_POWER cleared >>> [ 5.957918] ACPI: AC Adapter [ADP1] (on-line) >>> [ 5.959566] ACPI: Deprecated procfs I/F for battery is loaded, please >>> retry with CONFIG_ACPI_PROCFS_POWER cleared >>> [ 5.959574] ACPI: Battery Slot [BAT1] (battery present) >>> [ 6.033129] Linux agpgart interface v0.103 >>> [ 6.119998] Samsung-backlight: checking for SABI support. >>> [ 6.120080] Samsung-backlight: SABI is supported (f48da) >>> [ 6.135051] ACPI: Fan [FAN0] (off) >>> [ 6.135051] ACPI: Fan [FAN1] (off) >>> [ 6.136620] thermal LNXTHERM:00: registered as thermal_zone0 >>> [ 6.136623] ACPI: Thermal Zone [TZ00] (51 C) >>> [ 6.137129] thermal LNXTHERM:01: registered as thermal_zone1 >>> [ 6.137132] ACPI: Thermal Zone [TZ01] (51 C) >>> [ 6.179014] iTCO_vendor_support: vendor-support=0 >>> [ 6.180282] sky2: driver version 1.28 >>> [ 6.180367] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> >>> IRQ 19 >>> [ 6.180415] sky2 0000:06:00.0: setting latency timer to 64 >>> [ 6.180500] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 >>> [ 6.181160] sky2 0000:06:00.0: irq 44 for MSI/MSI-X >>> [ 6.181804] sky2 0000:06:00.0: eth0: addr 00:13:77:b0:56:1b >>> [ 6.192207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 >>> [ 6.192301] iTCO_wdt: Found a ICH9M TCO device (Version=2, >>> TCOBASE=0x0460) >>> [ 6.192372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) >>> [ 6.193704] agpgart-intel 0000:00:00.0: Intel GM45 Chipset >>> [ 6.193833] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K >>> total, 262144K mappable >>> [ 6.194690] agpgart-intel 0000:00:00.0: detected 32768K stolen memory >>> [ 6.194928] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ >>> 0xd0000000 >>> [ 6.425225] sd 0:0:0:0: Attached scsi generic sg0 type 0 >>> [ 6.425274] sr 1:0:0:0: Attached scsi generic sg1 type 5 >>> [ 6.580684] cfg80211: Calling CRDA to update world regulatory domain >>> [ 6.635902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) >>> -> >>> IRQ 22 >>> [ 6.636049] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X >>> [ 6.636080] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> [ 6.771772] [drm] Initialized drm 1.1.0 20060810 >>> [ 6.791280] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> >>> IRQ >>> 16 >>> [ 6.791294] ath5k 0000:02:00.0: setting latency timer to 64 >>> [ 6.791349] ath5k 0000:02:00.0: registered as 'phy0' >>> [ 6.889672] input: PC Speaker as /devices/platform/pcspkr/input/input5 >>> [ 6.925987] Bluetooth: Core ver 2.16 >>> [ 6.926189] NET: Registered protocol family 31 >>> [ 6.926191] Bluetooth: HCI device and connection manager initialized >>> [ 6.926194] Bluetooth: HCI socket layer initialized >>> [ 6.926196] Bluetooth: L2CAP socket layer initialized >>> [ 6.926264] Bluetooth: SCO socket layer initialized >>> [ 6.964060] Bluetooth: Generic Bluetooth USB driver ver 0.6 >>> [ 6.965950] usbcore: registered new interface driver btusb >>> [ 6.970145] hda_codec: ALC262: BIOS auto-probing. >>> [ 6.970705] input: HDA Digital PCBeep as >>> /devices/pci0000:00/0000:00:1b.0/input/input6 >>> [ 6.984416] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0 >>> [ 6.987488] input: HDA Intel HDMI/DP as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 >>> [ 6.987617] input: HDA Intel Mic as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 >>> [ 6.987738] input: HDA Intel Headphone as >>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 >>> [ 6.988095] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> >>> IRQ 16 >>> [ 6.988101] i915 0000:00:02.0: setting latency timer to 64 >>> [ 7.024656] i915 0000:00:02.0: irq 46 for MSI/MSI-X >>> [ 7.024663] [drm] Supports vblank timestamp caching Rev 1 >>> (10.10.2010). >>> [ 7.024665] [drm] Driver supports precise vblank timestamp query. >>> [ 7.024709] vgaarb: device changed decodes: >>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem >>> [ 7.203465] Linux media interface: v0.10 >>> [ 7.234519] Linux video capture interface: v2.00 >>> [ 7.327490] ath: EEPROM regdomain: 0x65 >>> [ 7.327493] ath: EEPROM indicates we should expect a direct regpair >>> map >>> [ 7.327497] ath: Country alpha2 being used: 00 >>> [ 7.327499] ath: Regpair used: 0x65 >>> [ 7.341089] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera >>> (174f:5931) >>> [ 7.357835] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps: >>> 0xa04711/0xa00000/0x0 >>> [ 7.364659] ieee80211 phy0: Selected rate control algorithm >>> 'minstrel_ht' >>> [ 7.364971] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: >>> 0x70) >>> [ 7.394585] input: SynPS/2 Synaptics TouchPad as >>> /devices/platform/i8042/serio4/input/input10 >>> [ 7.396181] uvcvideo: UVC non compliance - GET_DEF(PROBE) not >>> supported. >>> Enabling workaround. >>> [ 7.414784] usbcore: registered new interface driver uvcvideo >>> [ 7.414787] USB Video Class driver (v1.1.0) >>> [ 7.794860] fbcon: inteldrmfb (fb0) is primary device >>> [ 7.838481] Console: switching to colour frame buffer device 160x50 >>> [ 7.842933] fb0: inteldrmfb frame buffer device >>> [ 7.842935] drm: registered panic notifier >>> [ 7.843838] input: Video Bus as >>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11 >>> [ 7.843904] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: >>> no) >>> [ 7.843995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on >>> minor 0 >>> [ 7.844028] 0: no IPv6 routers present >>> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel. >>> [ 1252.792116] Disabling lock debugging due to kernel taint >>> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0) >>> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0) >>> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0) >>> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0) >>> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0) >>> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0) >>> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0) >>> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0) >>> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0) >>> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0) >>> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0) >>> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0) >>> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0) >>> >>> >>> > > >
