Re: 11c11040 Agere/LSI, Nickolay Kozlov

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I suspect it is a release of the 3.0 kernel.


On 09/05/2011 05:35 PM, marvin.stodolsky@xxxxxxxxx wrote:
> Nick . Please try some series 2.6.38 or earlier kernel, which we are now supporting. It is not obvious what your Arch-3 kernel is,
> 
> MarvS
> Sent from my Nokia phone
> -----Original Message-----
> From: Antonio Olivares
> Sent:  09/05/2011, 4:18  PM
> To: Nickolay Kozlov
> Cc: discuss@xxxxxxxxxxxxx
> Subject: Re: 11c11040 Agere/LSI, Nickolay Kozlov
> 
> 
> Nicolay,
> 
> Output from dmesg shows:
> 
> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel.
> [ 1252.792116] Disabling lock debugging due to kernel taint
> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0)
> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0)
> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0)
> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0)
> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0)
> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0)
> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0)
> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0)
> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0)
> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0)
> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0)
> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0)
> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0)
> 
> 
> In several reports, the modules load correctly, but when wvdialconf
> /etc/wvdial.conf is called, the computer freezes.  Thank you for
> testing the package.  Wish I could tell you more.  You did change
> license to achieve successfull compilation, but now get these errors.
> You may try to force the loading of the modules, but then get back to
> issue in begining (freezing).
> 
> Regards,
> 
> Antonio
> 
> On Mon, Sep 5, 2011 at 10:57 AM, Nickolay Kozlov <knick@xxxxxxx> wrote:
>> Hello!
>> I have internal 11c11040 Nicolay,
> 
> Output from dmesg shows:
> 
> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel.
> [ 1252.792116] Disabling lock debugging due to kernel taint
> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0)
> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0)
> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0)
> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0)
> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0)
> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0)
> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0)
> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0)
> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0)
> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0)
> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0)
> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0)
> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0)
> 
> 
> In several reports, the modules load correctly, but when wvdialconf
> /etc/wvdial.conf is called, the computer freezes.  Thank you for
> testing the package.  Wish I could tell you more.  You did change
> license to achieve successfull compilation, but now get these errors.
> You may try to force the loading of the modules, but then get back to
> issue in begining (freezing).
> 
> Regards,
> 
> Antonio
> 
> On Mon, Sep 5, 2011 at 10:57 AM, Nickolay Kozlov <knick@xxxxxxx> wrote:
>> Hello!
>> I have internal 11c11040 Agere modem in my notebook. Latest package
>> agrsm-11c11040-2.1.80-20110811.tar.bz2 compiles successfully, but when I try
>> to modprobe agrmodem module I receive the following message:
>> FATAL: Error inserting agrmodem (/lib/modules/3.0-ARCH/extra/agrmodem.ko):
>> Unknown symbol in module, or unknown parameter (see dmesg)
>> Any help would be appreciatted. Thanks in advance.
>>
>> scanModem output:
>>
>>  Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
>> Server,
>>  as HTML can contain viruses. Use as the email Subject Line:
>>           YourName, YourCountry  [H [2J
>> Arch Linux  kernel 3.0-ARCH
>>  With this Subject Line cogent experts will be alerted, and useful case
>> names left in the Archive.
>>  YourCountry will enable Country specific guidance. Linux experts in
>> YourCountry
>>  can be found through: http://www.linux.org/groups/index.html.
>> They will know your Country's modem code, which may be essential for dialup
>> service.
>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
>> Provider mail filters.
>>  So in a day, also check the Archived responses at http://www.linmodems.org
>> --------------------------  System information ----------------------------
>> CPU=i686,   [H [2J
>> Arch ,  ALSA_version=1.0.24
>> Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819
>> (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011
>>  scanModem update of:  2011_08_08
>>
>> /etc/lsb-release not found
>>
>>
>> The dkms driver upgrade utilities are installed,
>>
>>  There are no blacklisted modem drivers in /etc/modprobe*  files
>>
>>  Potentially useful modem drivers now loaded are:
>>       snd_hda_intel
>>
>> Attached USB devices are:
>>  ID 174f:5931 Syntek
>>  ID 0a5c:2101 Broadcom Corp. Bluetooth Controller
>> If a cellphone is not detected, see
>> http://ubuntuforums.org/archive/index.php/t-878554.html
>> A sample report is:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>
>> If a USB modem or cellphone is attached and was not detected, please
>> provide available information in your request to discuss@xxxxxxxxxxxxx
>>
>> Candidate PCI devices with modem chips are:
>> 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio
>> Controller (rev 03)
>> High Definition Audio cards can host modem chips.
>>
>> For candidate card in slot 00:1b.0, firmware information and bootup
>> diagnostics are:
>>  PCI slot    PCI ID        SubsystemID    Name
>>  ----------    ---------    ---------    --------------
>>  00:1b.0    8086:293e    144d:c521    Audio device: Intel Corporation 82801I
>>
>>  Modem interrupt assignment and sharing:
>>  46:        544        537   PCI-MSI-edge      hda_intel
>>  --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>> [    0.763899] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
>> [    0.763920] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit]
>> [    0.764001] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> [    0.764005] pci 0000:00:1b.0: PME# disabled
>> [    7.740686] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
>> IRQ 22
>> [    7.740774] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
>> [    7.740810] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> [    7.791115] input: HDA Digital PCBeep as
>> /devices/pci0000:00/0000:00:1b.0/input/input8
>> [    7.877916] input: HDA Intel HDMI/DP as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>> [    7.877992] input: HDA Intel Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
>> [    7.878063] input: HDA Intel Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
>>
>>  The PCI slot 00:1b.0 of the modem card may be disabled early in
>>  a bootup process,  but then enabled later. If modem drivers load
>>  but the  modem is not responsive, read DOCs/Bootup.txt about possible
>> fixes.
>>  Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>  if help is needed.
>>
>>
>>
>> ===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
>> The ALSA packages provide audio support and also drivers for some modems.
>> ALSA diagnostics are written during bootup to /proc/asound/ folders.
>>
>> The modem cards detected by "aplay -l"  are: None
>>
>>
>> The /proc/asound/pcm file reports:
>> -----------------------
>> 00-00: ALC262 Analog : ALC262 Analog : playback 1 : capture 1
>> 00-03: HDMI 0 : HDMI 0 : playback 1
>>
>> about /proc/asound/cards:
>> ------------------------
>>  0 [Intel          ]: HDA-Intel - HDA Intel
>>                      HDA Intel at 0xf6700000 irq 46
>>
>>  PCI slot 00:1b.0 has a High Definition Audio Card
>>  The drivers are in the kernel modules tree at:
>>
>>  The modem codec file for the HDA card is: /proc/asound/card0/codec#1
>> --------------------------------------------------------
>> Codec: LSI ID 1040
>> Address: 1
>> MFG Function Id: 0x2 (unsol 1)
>> Vendor Id: 0x11c11040
>> Subsystem Id: 0x2118144d
>> Revision Id: 0x100200
>> Modem Function Group: 0x1
>>
>>  The audio card hosts a softmodem chip:  0x11c11040
>>
>> The softmodem chip 11c11040 is hosted on the Subsytem of the High Definition
>> Audio card,
>> and is supported by the AgereSystems/LSI driver pair agrmodem + agrserial,
>> which is provided by
>> the most current package agrsm-11c11040-version at
>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>
>> If not a Conexant modem, the driver agrsm with its dependent drivers:
>>
>> ----------
>> provide audio + modem support with the modem chip residing on the subsystem.
>> Any particular card can host any one of several soft modem chips.
>>
>> === Finished firmware and bootup diagnostics, next deducing cogent software.
>> ===
>>
>> Predictive  diagnostics for card in bus 00:1b.0:
>>    Modem chipset  detected on
>> NAME="Audio device: Intel Corporation 82801I "
>> CLASS=0403
>> PCIDEV=8086:293e
>> SUBSYS=144d:c521
>> IRQ=46
>> HDA2=00:1b.0
>> SOFT=8086:293e.HDA
>> HDAchipVendorID=11c1
>> CHIP=0x11c11040
>> IDENT=agrsm
>> Driver=agrsm
>> package=agrsm-11c11040
>>
>>  For candidate modem in:  00:1b.0
>>   0403 Audio device: Intel Corporation 82801I
>>      Primary device ID:  8086:293e
>>    Subsystem PCI_id  144d:c521
>>    Softmodem codec or chipset from diagnostics: 0x11c11040
>>                               from    Archives:
>>                        The HDA card softmodem chip is 0x11c11040
>>
>>
>> Support type needed or chipset:    agrsm
>>
>>
>> Writing DOCs/Intel.txt
>>
>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial
>> driver pair.
>> There are a few different chipsets which use this driver pair, but they use
>> different code resources:
>> Chipsets            KV*    PackageNames (most current as of November 2009)
>> ----------------------------------------------------------------------------------------------
>> 11c1:048c and 11c1:048f         2.6.29
>>  agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
>> 11c1:0620                       2.6.31  agrsm06pci-2.1.80_20100106_i386.deb
>> or agrsm06pci-2.1.80~20100106.tar.gz !!
>> 11c11040 (on HDA audio cards)   2.6.31  agrsm-11c11040_20091225_i386.deb or
>> agrsm-11c11040-2.1.80~20091225.tar.bz2  !!
>>   All available at:
>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>> Additionally there are;
>> automation & testing                    agrsm-tools_0.0.1_all.deb or
>> agrsm-tools-0.0.1-2.noarch.rpm
>> General background                      agrsm_howto.txt
>> ------------------------------------------------------------------------------------------------
>> * KV == latest kernel release with a reported success
>> !! Latest update with major credit to  Nikolay Zhuravlev
>>   But see conflict issue:
>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
>>   For the 11c11040 chip with kernels 2.6.31 and later a change in a modules
>> loading settingmay be necessary.
>>   Within the file /etc/modprobe.d/alsa-base.conf  (or equivalent for your
>> Distro), change the phrase:
>>      options snd-hda-intel power_save=10
>>   to:
>>      options snd-hda-intel power_save=0
>>   or the agrsm drivers will not function. For Ubuntu related systems this
>> can be done with:
>>   $ sudo gedit /etc/modprobe.d/alsa-base.conf
>>
>> Report from  Bjorn Wielens:
>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>>  an error about the module_version symbol. Using:
>> # modprobe --force agrmodem
>> # modprobe --force agrserial
>> is necessary to load the drivers, and does not appear to cause ill effects.
>>
>>
>> All of the above packages are dkms competent.  This means that if your Linux
>> distros dkms package
>> is previously installed, if provides for future updates matching forthcoming
>> kernels.
>>
>> -------------- end Agere Systems section -------------------
>>
>>  Completed candidate modem analyses.
>>
>>  A UDEV device file system is not active.
>>
>>  Versions adequately match for the compiler installed: 4.6.1
>>             and the compiler used in kernel assembly: 4.6.1
>>
>>  linux-headers-3.0-ARCH resources needed for compiling are not manifestly
>> ready!
>>
>>  If compiling is necessary packages must be installed, providing:
>>     kernel-source-3.0-ARCH
>>
>>
>> If a driver compilation fails, with message including some lack of some
>> FileName.h (stdio.h for example), then
>> Some additional kernel-header files need installation to /usr/include. The
>> minimal additional packages are libc6-dev
>> and any of its dependents, under Ubuntu linux-libc-dev
>>
>> If an alternate ethernet connection is available,
>> $  apt-get update
>> $  apt-get -s install linux-kernel-devel
>> will install needed packages.
>> For Debian/Ubuntu related distributions, run the following command to
>> display the needed package list:
>>
>> Otherwise packages have to be found through http://packages.ubuntu.com
>> Once downloaded and transferred into a Linux partition,
>> they can be installed alltogether with:
>> $ sudo dpkg -i *.deb
>>
>>
>> Checking pppd properties:
>>    -r-xr-xr-x 1 root root 265044 февр.  9  2011 /usr/sbin/pppd
>>
>> In case of an "error 17" "serial loopback" problem, see:
>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>
>> To enable dialout without Root permission do:
>>    $ su - root  (not for Ubuntu)
>>         chmod a+x /usr/sbin/pppd
>> or under Ubuntu related Linuxes
>>     chmod a+x /usr/sbin/pppd
>>
>> Checking settings of:    /etc/ppp/options
>> asyncmap 0
>> auth
>> crtscts
>> lock
>> hide-password
>> modem
>> proxyarp
>> lcp-echo-interval 30
>> lcp-echo-failure 4
>> noipx
>>
>> In case of a message like:
>>   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>
>> For guidance on FAX usage, get from
>> http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
>> It has samples for a modem using port /dev/ttySL0, which must be changed to
>> match your modem's port.
>>
>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 pan1
>> wlan0
>> Which can interfere with Browser naviagation.
>>
>>  Don't worry about the following, it is for experts should trouble shooting
>> be necessary.
>> ==========================================================
>>
>>  Checking for modem support lines:
>>  --------------------------------------
>>     /device/modem symbolic link:
>> slmodemd created symbolic link /dev/ttySL0:
>>     Within /etc/udev/ files:
>>
>>     Within /etc/modprobe.conf files:
>>
>>     Within any ancient /etc/devfs files:
>>
>>     Within ancient kernel 2.4.n /etc/module.conf files:
>>
>> --------- end modem support lines --------
>>
>> dmesg output:
>>
>> [    0.000000] Initializing cgroup subsys cpuset
>> [    0.000000] Initializing cgroup subsys cpu
>> [    0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1
>> 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011
>> [    0.000000] BIOS-provided physical RAM map:
>> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e400 (usable)
>> [    0.000000]  BIOS-e820: 000000000009e400 - 00000000000a0000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
>> [    0.000000]  BIOS-e820: 0000000000100000 - 000000007d6a1000 (usable)
>> [    0.000000]  BIOS-e820: 000000007d6a1000 - 000000007d6a7000 (reserved)
>> [    0.000000]  BIOS-e820: 000000007d6a7000 - 000000007d7bd000 (usable)
>> [    0.000000]  BIOS-e820: 000000007d7bd000 - 000000007d80f000 (reserved)
>> [    0.000000]  BIOS-e820: 000000007d80f000 - 000000007d908000 (usable)
>> [    0.000000]  BIOS-e820: 000000007d908000 - 000000007db0f000 (reserved)
>> [    0.000000]  BIOS-e820: 000000007db0f000 - 000000007db18000 (usable)
>> [    0.000000]  BIOS-e820: 000000007db18000 - 000000007db1f000 (reserved)
>> [    0.000000]  BIOS-e820: 000000007db1f000 - 000000007db64000 (usable)
>> [    0.000000]  BIOS-e820: 000000007db64000 - 000000007db9f000 (ACPI NVS)
>> [    0.000000]  BIOS-e820: 000000007db9f000 - 000000007dc00000 (ACPI data)
>> [    0.000000]  BIOS-e820: 000000007dc00000 - 000000007de00000 (reserved)
>> [    0.000000]  BIOS-e820: 000000007e000000 - 0000000080000000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> [    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>> [    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
>> [    0.000000] DMI present.
>> [    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. Q310
>> /Q310                       , BIOS 10SU.MP01.20090121.HCW 01/21/2009
>> [    0.000000] e820 update range: 0000000000000000 - 0000000000010000
>> (usable) ==> (reserved)
>> [    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
>> (usable)
>> [    0.000000] last_pfn = 0x7db64 max_arch_pfn = 0x100000
>> [    0.000000] MTRR default type: uncachable
>> [    0.000000] MTRR fixed ranges enabled:
>> [    0.000000]   00000-9FFFF write-back
>> [    0.000000]   A0000-BFFFF uncachable
>> [    0.000000]   C0000-D3FFF write-protect
>> [    0.000000]   D4000-D7FFF uncachable
>> [    0.000000]   D8000-FFFFF write-protect
>> [    0.000000] MTRR variable ranges enabled:
>> [    0.000000]   0 base 07E000000 mask FFE000000 uncachable
>> [    0.000000]   1 base 000000000 mask F80000000 write-back
>> [    0.000000]   2 base 07DC00000 mask FFFC00000 uncachable
>> [    0.000000]   3 disabled
>> [    0.000000]   4 disabled
>> [    0.000000]   5 disabled
>> [    0.000000]   6 disabled
>> [    0.000000]   7 disabled
>> [    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
>> 0x7010600070106
>> [    0.000000] found SMP MP-table at [c00f7310] f7310
>> [    0.000000] initial memory mapped : 0 - 00c00000
>> [    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
>> [    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
>> [    0.000000]  0000000000 - 0000400000 page 4k
>> [    0.000000]  0000400000 - 0037400000 page 2M
>> [    0.000000]  0037400000 - 00377fe000 page 4k
>> [    0.000000] kernel direct mapping tables up to 377fe000 @ bfb000-c00000
>> [    0.000000] RAMDISK: 7d47a000 - 7d691000
>> [    0.000000] Allocated new RAMDISK: 375e7000 - 377fdf73
>> [    0.000000] Move RAMDISK from 000000007d47a000 - 000000007d690f72 to
>> 375e7000 - 377fdf72
>> [    0.000000] ACPI: RSDP 000f7270 00024 (v02 PTLTD )
>> [    0.000000] ACPI: XSDT 7dbf85c1 00074 (v01 SECCSD LH43STAR 06040000  LTP
>> 00000000)
>> [    0.000000] ACPI: FACP 7dbe8000 000F4 (v03 INTEL  CRESTLNE 06040000 ALAN
>> 00000001)
>> [    0.000000] ACPI: DSDT 7dbe9000 0652E (v02 Intel  CANTIGA  06040000 INTL
>> 20050624)
>> [    0.000000] ACPI: FACS 7db9efc0 00040
>> [    0.000000] ACPI: HPET 7dbfed86 00038 (v01 INTEL  CRESTLNE 06040000 LOHR
>> 0000005A)
>> [    0.000000] ACPI: MCFG 7dbfedbe 0003C (v01 INTEL  CRESTLNE 06040000 LOHR
>> 0000005A)
>> [    0.000000] ACPI: APIC 7dbfedfa 00068 (v01 PTLTD  ? APIC   06040000  LTP
>> 00000000)
>> [    0.000000] ACPI: BOOT 7dbfee62 00028 (v01 PTLTD  $SBFTBL$ 06040000  LTP
>> 00000001)
>> [    0.000000] ACPI: SLIC 7dbfee8a 00176 (v01 SECCSD LH43STAR 06040000  LTP
>> 00000000)
>> [    0.000000] ACPI: SSDT 7dbf865d 00093 (v01 BrtRef  DD01BRT 00001000 INTL
>> 20050624)
>> [    0.000000] ACPI: SSDT 7dbe7000 005F9 (v01  PmRef    CpuPm 00003000 INTL
>> 20050624)
>> [    0.000000] ACPI: SSDT 7dbe6000 00259 (v01  PmRef  Cpu0Tst 00003000 INTL
>> 20050624)
>> [    0.000000] ACPI: SSDT 7dbe5000 0020F (v01  PmRef    ApTst 00003000 INTL
>> 20050624)
>> [    0.000000] ACPI: Local APIC address 0xfee00000
>> [    0.000000] 1123MB HIGHMEM available.
>> [    0.000000] 887MB LOWMEM available.
>> [    0.000000]   mapped low ram: 0 - 377fe000
>> [    0.000000]   low ram: 0 - 377fe000
>> [    0.000000] Zone PFN ranges:
>> [    0.000000]   DMA      0x00000010 -> 0x00001000
>> [    0.000000]   Normal   0x00001000 -> 0x000377fe
>> [    0.000000]   HighMem  0x000377fe -> 0x0007db64
>> [    0.000000] Movable zone start PFN for each node
>> [    0.000000] early_node_map[6] active PFN ranges
>> [    0.000000]     0: 0x00000010 -> 0x0000009e
>> [    0.000000]     0: 0x00000100 -> 0x0007d6a1
>> [    0.000000]     0: 0x0007d6a7 -> 0x0007d7bd
>> [    0.000000]     0: 0x0007d80f -> 0x0007d908
>> [    0.000000]     0: 0x0007db0f -> 0x0007db18
>> [    0.000000]     0: 0x0007db1f -> 0x0007db64
>> [    0.000000] On node 0 totalpages: 514188
>> [    0.000000] free_area_init_node: node 0, pgdat c05adc80, node_mem_map
>> f662e200
>> [    0.000000]   DMA zone: 32 pages used for memmap
>> [    0.000000]   DMA zone: 0 pages reserved
>> [    0.000000]   DMA zone: 3950 pages, LIFO batch:0
>> [    0.000000]   Normal zone: 1744 pages used for memmap
>> [    0.000000]   Normal zone: 221486 pages, LIFO batch:31
>> [    0.000000]   HighMem zone: 2247 pages used for memmap
>> [    0.000000]   HighMem zone: 284729 pages, LIFO batch:31
>> [    0.000000] Using APIC driver default
>> [    0.000000] ACPI: PM-Timer IO Port: 0x408
>> [    0.000000] ACPI: Local APIC address 0xfee00000
>> [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>> [    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
>> 0-23
>> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>> [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> [    0.000000] ACPI: IRQ0 used by override.
>> [    0.000000] ACPI: IRQ2 used by override.
>> [    0.000000] ACPI: IRQ9 used by override.
>> [    0.000000] Using ACPI (MADT) for SMP configuration information
>> [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> [    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> [    0.000000] nr_irqs_gsi: 40
>> [    0.000000] PM: Registered nosave memory: 000000000009e000 -
>> 000000000009f000
>> [    0.000000] PM: Registered nosave memory: 000000000009f000 -
>> 00000000000a0000
>> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
>> 00000000000dc000
>> [    0.000000] PM: Registered nosave memory: 00000000000dc000 -
>> 0000000000100000
>> [    0.000000] Allocating PCI resources starting at 80000000 (gap:
>> 80000000:60000000)
>> [    0.000000] Booting paravirtualized kernel on bare hardware
>> [    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2
>> nr_node_ids:1
>> [    0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s25472 r0 d23680
>> u2097152
>> [    0.000000] pcpu-alloc: s25472 r0 d23680 u2097152 alloc=1*4194304
>> [    0.000000] pcpu-alloc: [0] 0 1
>> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total
>> pages: 510165
>> [    0.000000] Kernel command line: root=/dev/sda4 ro acpi_backlight=vendor
>> [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
>> [    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
>> bytes)
>> [    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
>> bytes)
>> [    0.000000] Initializing CPU#0
>> [    0.000000] allocated 8238400 bytes of page_cgroup
>> [    0.000000] please try 'cgroup_disable=memory' option if you don't want
>> memory cgroups
>> [    0.000000] Initializing HighMem for node 0 (000377fe:0007db64)
>> [    0.000000] Memory: 2023248k/2059664k available (3415k kernel code,
>> 33504k reserved, 1407k data, 500k init, 1147904k highmem)
>> [    0.000000] virtual kernel memory layout:
>> [    0.000000]     fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
>> [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>> [    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
>> [    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
>> [    0.000000]       .init : 0xc05b6000 - 0xc0633000   ( 500 kB)
>> [    0.000000]       .data : 0xc0455cd5 - 0xc05b5980   (1407 kB)
>> [    0.000000]       .text : 0xc0100000 - 0xc0455cd5   (3415 kB)
>> [    0.000000] Checking if this processor honours the WP bit even in
>> supervisor mode...Ok.
>> [    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0,
>> CPUs=2, Nodes=1
>> [    0.000000] Preemptible hierarchical RCU implementation.
>> [    0.000000]     Verbose stalled-CPUs detection is disabled.
>> [    0.000000] NR_IRQS:512
>> [    0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
>> [    0.000000] Extended CMOS year: 2000
>> [    0.000000] Console: colour VGA+ 80x25
>> [    0.000000] console [tty0] enabled
>> [    0.000000] hpet clockevent registered
>> [    0.000000] Fast TSC calibration using PIT
>> [    0.000000] Detected 2161.088 MHz processor.
>> [    0.003337] Calibrating delay loop (skipped), value calculated using
>> timer frequency.. 4323.26 BogoMIPS (lpj=7203626)
>> [    0.003342] pid_max: default: 32768 minimum: 301
>> [    0.003383] Security Framework initialized
>> [    0.003389] AppArmor: AppArmor disabled by boot time parameter
>> [    0.003409] Mount-cache hash table entries: 512
>> [    0.003616] Initializing cgroup subsys cpuacct
>> [    0.003628] Initializing cgroup subsys memory
>> [    0.003639] Initializing cgroup subsys devices
>> [    0.003641] Initializing cgroup subsys freezer
>> [    0.003643] Initializing cgroup subsys net_cls
>> [    0.003645] Initializing cgroup subsys blkio
>> [    0.003685] CPU: Physical Processor ID: 0
>> [    0.003687] CPU: Processor Core ID: 0
>> [    0.003690] mce: CPU supports 6 MCE banks
>> [    0.003699] CPU0: Thermal monitoring enabled (TM2)
>> [    0.003703] using mwait in idle threads.
>> [    0.006743] ACPI: Core revision 20110413
>> [    0.013347] ftrace: allocating 15364 entries in 31 pages
>> [    0.016716] Enabling APIC mode:  Flat.  Using 1 I/O APICs
>> [    0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> [    0.053005] CPU0: Intel(R) Core(TM)2 Duo CPU     T5850  @ 2.16GHz
>> stepping 0d
>> [    0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU
>> driver.
>> [    0.053330] PEBS disabled due to CPU errata.
>> [    0.053330] ... version:                2
>> [    0.053330] ... bit width:              40
>> [    0.053330] ... generic registers:      2
>> [    0.053330] ... value mask:             000000ffffffffff
>> [    0.053330] ... max period:             000000007fffffff
>> [    0.053330] ... fixed-purpose events:   3
>> [    0.053330] ... event mask:             0000000700000003
>> [    0.070121] NMI watchdog enabled, takes one hw-pmu counter.
>> [    0.096675] CPU 1 irqstacks, hard=f54ca000 soft=f54cc000
>> [    0.096677] Booting Node   0, Processors  #1 Ok.
>> [    0.096680] smpboot cpu 1: start_ip = 9a000
>> [    0.006666] Initializing CPU#1
>> [    0.193349] NMI watchdog enabled, takes one hw-pmu counter.
>> [    0.199991] Brought up 2 CPUs
>> [    0.199994] Total of 2 processors activated (8648.85 BogoMIPS).
>> [    0.200907] devtmpfs: initialized
>> [    0.200907] PM: Registering ACPI NVS region at 7db64000 (241664 bytes)
>> [    0.201070] print_constraints: dummy:
>> [    0.201127] NET: Registered protocol family 16
>> [    0.201235] ACPI: bus type pci registered
>> [    0.201328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
>> 0xe0000000-0xefffffff] (base 0xe0000000)
>> [    0.201332] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
>> [    0.201334] PCI: Using MMCONFIG for extended config space
>> [    0.201336] PCI: Using configuration type 1 for base access
>> [    0.201828] bio: create slab <bio-0> at 0
>> [    0.204558] ACPI: EC: Look up EC in DSDT
>> [    0.207733] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
>> [    0.209547] ACPI: SSDT 7db1ac20 00265 (v01  PmRef  Cpu0Ist 00003000 INTL
>> 20050624)
>> [    0.209866] ACPI: Dynamic OEM Table Load:
>> [    0.209869] ACPI: SSDT   (null) 00265 (v01  PmRef  Cpu0Ist 00003000 INTL
>> 20050624)
>> [    0.210074] ACPI: SSDT 7db18020 00C78 (v01  PmRef  Cpu0Cst 00003001 INTL
>> 20050624)
>> [    0.210374] ACPI: Dynamic OEM Table Load:
>> [    0.210377] ACPI: SSDT   (null) 00C78 (v01  PmRef  Cpu0Cst 00003001 INTL
>> 20050624)
>> [    0.230249] ACPI: SSDT 7db19ca0 001CF (v01  PmRef    ApIst 00003000 INTL
>> 20050624)
>> [    0.230585] ACPI: Dynamic OEM Table Load:
>> [    0.230588] ACPI: SSDT   (null) 001CF (v01  PmRef    ApIst 00003000 INTL
>> 20050624)
>> [    0.240080] ACPI: SSDT 7db19f20 0008D (v01  PmRef    ApCst 00003000 INTL
>> 20050624)
>> [    0.240394] ACPI: Dynamic OEM Table Load:
>> [    0.240397] ACPI: SSDT   (null) 0008D (v01  PmRef    ApCst 00003000 INTL
>> 20050624)
>> [    0.753336] ACPI: Interpreter enabled
>> [    0.753347] ACPI: (supports S0 S3 S4 S5)
>> [    0.753369] ACPI: Using IOAPIC for interrupt routing
>> [    0.753742] [Firmware Bug]: ACPI: No _BQC method, cannot determine
>> initial brightness
>> [    0.757641] ACPI: Power Resource [FN00] (off)
>> [    0.757641] ACPI: Power Resource [FN01] (off)
>> [    0.757641] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>> [    0.757641] ACPI: No dock devices found.
>> [    0.757641] HEST: Table not found.
>> [    0.757641] PCI: Using host bridge windows from ACPI; if necessary, use
>> "pci=nocrs" and report a bug
>> [    0.757856] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
>> [    0.758469] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
>> [    0.758472] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
>> [    0.758475] pci_root PNP0A08:00: host bridge window [mem
>> 0x000a0000-0x000bffff]
>> [    0.758478] pci_root PNP0A08:00: host bridge window [mem
>> 0x000d4000-0x000d7fff]
>> [    0.758481] pci_root PNP0A08:00: host bridge window [mem
>> 0x000d8000-0x000dbfff]
>> [    0.758484] pci_root PNP0A08:00: host bridge window [mem
>> 0x80000000-0xfebfffff]
>> [    0.758499] pci 0000:00:00.0: [8086:2a40] type 0 class 0x000600
>> [    0.758526] DMAR: Forcing write-buffer flush capability
>> [    0.758528] DMAR: Disabling IOMMU for graphics on this chipset
>> [    0.758553] pci 0000:00:02.0: [8086:2a42] type 0 class 0x000300
>> [    0.758568] pci 0000:00:02.0: reg 10: [mem 0xf6000000-0xf63fffff 64bit]
>> [    0.758579] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit
>> pref]
>> [    0.758586] pci 0000:00:02.0: reg 20: [io  0x1800-0x1807]
>> [    0.758623] pci 0000:00:02.1: [8086:2a43] type 0 class 0x000380
>> [    0.758636] pci 0000:00:02.1: reg 10: [mem 0xf6400000-0xf64fffff 64bit]
>> [    0.760028] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
>> [    0.760088] pci 0000:00:1a.0: reg 20: [io  0x1820-0x183f]
>> [    0.760149] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
>> [    0.760210] pci 0000:00:1a.1: reg 20: [io  0x1840-0x185f]
>> [    0.760270] pci 0000:00:1a.2: [8086:2939] type 0 class 0x000c03
>> [    0.760330] pci 0000:00:1a.2: reg 20: [io  0x1860-0x187f]
>> [    0.760403] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
>> [    0.760431] pci 0000:00:1a.7: reg 10: [mem 0xf6704800-0xf6704bff]
>> [    0.760526] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
>> [    0.760531] pci 0000:00:1a.7: PME# disabled
>> [    0.760561] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
>> [    0.760583] pci 0000:00:1b.0: reg 10: [mem 0xf6700000-0xf6703fff 64bit]
>> [    0.760663] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> [    0.760668] pci 0000:00:1b.0: PME# disabled
>> [    0.760694] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
>> [    0.760777] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> [    0.760782] pci 0000:00:1c.0: PME# disabled
>> [    0.760812] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
>> [    0.760895] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
>> [    0.760899] pci 0000:00:1c.2: PME# disabled
>> [    0.760928] pci 0000:00:1c.3: [8086:2946] type 1 class 0x000604
>> [    0.761010] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
>> [    0.761014] pci 0000:00:1c.3: PME# disabled
>> [    0.761049] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
>> [    0.761109] pci 0000:00:1d.0: reg 20: [io  0x1880-0x189f]
>> [    0.761170] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
>> [    0.761230] pci 0000:00:1d.1: reg 20: [io  0x18a0-0x18bf]
>> [    0.761293] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
>> [    0.761354] pci 0000:00:1d.2: reg 20: [io  0x18c0-0x18df]
>> [    0.761428] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
>> [    0.761456] pci 0000:00:1d.7: reg 10: [mem 0xf6704c00-0xf6704fff]
>> [    0.761549] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> [    0.761554] pci 0000:00:1d.7: PME# disabled
>> [    0.761578] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
>> [    0.761657] pci 0000:00:1f.0: [8086:2919] type 0 class 0x000601
>> [    0.761793] pci 0000:00:1f.2: [8086:2929] type 0 class 0x000106
>> [    0.761821] pci 0000:00:1f.2: reg 10: [io  0x1818-0x181f]
>> [    0.761832] pci 0000:00:1f.2: reg 14: [io  0x180c-0x180f]
>> [    0.761844] pci 0000:00:1f.2: reg 18: [io  0x1810-0x1817]
>> [    0.761855] pci 0000:00:1f.2: reg 1c: [io  0x1808-0x180b]
>> [    0.761867] pci 0000:00:1f.2: reg 20: [io  0x18e0-0x18ff]
>> [    0.761879] pci 0000:00:1f.2: reg 24: [mem 0xf6704000-0xf67047ff]
>> [    0.761929] pci 0000:00:1f.2: PME# supported from D3hot
>> [    0.761933] pci 0000:00:1f.2: PME# disabled
>> [    0.761955] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
>> [    0.761977] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
>> [    0.762008] pci 0000:00:1f.3: reg 20: [io  0x1c00-0x1c1f]
>> [    0.762120] pci 0000:02:00.0: [168c:001c] type 0 class 0x000200
>> [    0.762150] pci 0000:02:00.0: reg 10: [mem 0xf3000000-0xf300ffff 64bit]
>> [    0.762264] pci 0000:02:00.0: PME# supported from D3hot
>> [    0.762270] pci 0000:02:00.0: PME# disabled
>> [    0.762299] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You
>> can enable it with 'pcie_aspm=force'
>> [    0.762312] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>> [    0.762317] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>> [    0.762322] pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
>> [    0.762330] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf0ffffff
>> 64bit pref]
>> [    0.762388] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>> [    0.762392] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>> [    0.762398] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
>> [    0.762405] pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf1ffffff
>> 64bit pref]
>> [    0.762618] pci 0000:06:00.0: [11ab:4363] type 0 class 0x000200
>> [    0.762771] pci 0000:06:00.0: reg 10: [mem 0xf5000000-0xf5003fff 64bit]
>> [    0.762848] pci 0000:06:00.0: reg 18: [io  0x4000-0x40ff]
>> [    0.763168] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
>> [    0.763469] pci 0000:06:00.0: supports D1 D2
>> [    0.763472] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> [    0.763492] pci 0000:06:00.0: PME# disabled
>> [    0.770004] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>> [    0.770009] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>> [    0.770013] pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
>> [    0.770021] pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf2ffffff
>> 64bit pref]
>> [    0.770100] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive
>> decode)
>> [    0.770105] pci 0000:00:1e.0:   bridge window [io  0xf000-0x0000]
>> (disabled)
>> [    0.770111] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff]
>> (disabled)
>> [    0.770118] pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff
>> pref] (disabled)
>> [    0.770121] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7]
>> (subtractive decode)
>> [    0.770124] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff]
>> (subtractive decode)
>> [    0.770127] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff]
>> (subtractive decode)
>> [    0.770129] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff]
>> (subtractive decode)
>> [    0.770132] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff]
>> (subtractive decode)
>> [    0.770135] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfebfffff]
>> (subtractive decode)
>> [    0.770161] pci_bus 0000:00: on NUMA node 0
>> [    0.770164] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> [    0.770402] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>> [    0.770459] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>> [    0.770506] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>> [    0.770562]  pci0000:00: Requesting ACPI _OSC control (0x1d)
>> [    0.770566]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
>> returned control mask: 0x1d
>> [    0.770567] ACPI _OSC control for PCIe not granted, disabling ASPM
>> [    0.776207] ACPI: PCI Interrupt Link [LNKA] (IRQs *11)
>> [    0.776254] ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>> [    0.776300] ACPI: PCI Interrupt Link [LNKC] (IRQs *5)
>> [    0.776345] ACPI: PCI Interrupt Link [LNKD] (IRQs *5)
>> [    0.776389] ACPI: PCI Interrupt Link [LNKE] (IRQs 11) *0, disabled.
>> [    0.776438] ACPI: PCI Interrupt Link [LNKF] (IRQs *10)
>> [    0.776483] ACPI: PCI Interrupt Link [LNKG] (IRQs *5)
>> [    0.776527] ACPI: PCI Interrupt Link [LNKH] (IRQs *5)
>> [    0.776610] vgaarb: device added:
>> PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
>> [    0.776630] vgaarb: loaded
>> [    0.776632] vgaarb: bridge control possible 0000:00:02.0
>> [    0.776725] PCI: Using ACPI for IRQ routing
>> [    0.786784] PCI: pci_cache_line_size set to 64 bytes
>> [    0.786913] reserve RAM buffer: 000000000009e400 - 000000000009ffff
>> [    0.786915] reserve RAM buffer: 000000007d6a1000 - 000000007fffffff
>> [    0.786920] reserve RAM buffer: 000000007d7bd000 - 000000007fffffff
>> [    0.786924] reserve RAM buffer: 000000007d908000 - 000000007fffffff
>> [    0.786927] reserve RAM buffer: 000000007db18000 - 000000007fffffff
>> [    0.786930] reserve RAM buffer: 000000007db64000 - 000000007fffffff
>> [    0.787043] NetLabel: Initializing
>> [    0.787045] NetLabel:  domain hash size = 128
>> [    0.787047] NetLabel:  protocols = UNLABELED CIPSOv4
>> [    0.787060] NetLabel:  unlabeled traffic allowed by default
>> [    0.787073] HPET: 4 timers in total, 0 timers will be used for per-cpu
>> timer
>> [    0.787079] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
>> [    0.787084] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
>> [    0.796633] Switching to clocksource hpet
>> [    0.799865] Switched to NOHz mode on CPU #0
>> [    0.799922] Switched to NOHz mode on CPU #1
>> [    0.803406] pnp: PnP ACPI init
>> [    0.803428] ACPI: bus type pnp registered
>> [    0.803787] pnp 00:00: [bus 00-ff]
>> [    0.803790] pnp 00:00: [io  0x0000-0x0cf7 window]
>> [    0.803792] pnp 00:00: [io  0x0cf8-0x0cff]
>> [    0.803795] pnp 00:00: [io  0x0d00-0xffff window]
>> [    0.803797] pnp 00:00: [mem 0x000a0000-0x000bffff window]
>> [    0.803799] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
>> [    0.803802] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
>> [    0.803804] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
>> [    0.803806] pnp 00:00: [mem 0x000cc000-0x000cffff window]
>> [    0.803808] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
>> [    0.803811] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
>> [    0.803813] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
>> [    0.803815] pnp 00:00: [mem 0x000dc000-0x000dffff window]
>> [    0.803817] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
>> [    0.803820] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
>> [    0.803822] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
>> [    0.803824] pnp 00:00: [mem 0x000ec000-0x000effff window]
>> [    0.803826] pnp 00:00: [mem 0x000f0000-0x000fffff window]
>> [    0.803829] pnp 00:00: [mem 0x80000000-0xfebfffff window]
>> [    0.803831] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
>> [    0.803911] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
>> (active)
>> [    0.804097] pnp 00:01: [io  0x0000-0x001f]
>> [    0.804100] pnp 00:01: [io  0x0081-0x0091]
>> [    0.804102] pnp 00:01: [io  0x0093-0x009f]
>> [    0.804104] pnp 00:01: [io  0x00c0-0x00df]
>> [    0.804106] pnp 00:01: [dma 4]
>> [    0.804139] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
>> [    0.804148] pnp 00:02: [mem 0xff000000-0xffffffff]
>> [    0.804179] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
>> [    0.804249] pnp 00:03: [mem 0xfed00000-0xfed003ff]
>> [    0.804315] system 00:03: [mem 0xfed00000-0xfed003ff] has been reserved
>> [    0.804318] system 00:03: Plug and Play ACPI device, IDs PNP0103 PNP0c01
>> (active)
>> [    0.804330] pnp 00:04: [io  0x00f0]
>> [    0.804342] pnp 00:04: [irq 13]
>> [    0.804378] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
>> [    0.804391] pnp 00:05: [io  0x002e-0x002f]
>> [    0.804393] pnp 00:05: [io  0x004e-0x004f]
>> [    0.804395] pnp 00:05: [io  0x0061]
>> [    0.804397] pnp 00:05: [io  0x0063]
>> [    0.804399] pnp 00:05: [io  0x0065]
>> [    0.804403] pnp 00:05: [io  0x0067]
>> [    0.804405] pnp 00:05: [io  0x0070]
>> [    0.804407] pnp 00:05: [io  0x0080]
>> [    0.804409] pnp 00:05: [io  0x0092]
>> [    0.804410] pnp 00:05: [io  0x00b2-0x00b3]
>> [    0.804412] pnp 00:05: [io  0x0680-0x069f]
>> [    0.804415] pnp 00:05: [io  0x0480-0x048f]
>> [    0.804417] pnp 00:05: [io  0xffff]
>> [    0.804419] pnp 00:05: [io  0xffff]
>> [    0.804420] pnp 00:05: [io  0x0400-0x047f]
>> [    0.804422] pnp 00:05: [io  0x0480-0x048f]
>> [    0.804424] pnp 00:05: [io  0x1180-0x11ff]
>> [    0.804426] pnp 00:05: [io  0x164e-0x164f]
>> [    0.804428] pnp 00:05: [io  0x5000-0x500f]
>> [    0.804430] pnp 00:05: [io  0xfe00]
>> [    0.804494] system 00:05: [io  0x0680-0x069f] has been reserved
>> [    0.804497] system 00:05: [io  0x0480-0x048f] has been reserved
>> [    0.804500] system 00:05: [io  0xffff] has been reserved
>> [    0.804503] system 00:05: [io  0xffff] has been reserved
>> [    0.804505] system 00:05: [io  0x0400-0x047f] has been reserved
>> [    0.804508] system 00:05: [io  0x0480-0x048f] has been reserved
>> [    0.804511] system 00:05: [io  0x1180-0x11ff] has been reserved
>> [    0.804513] system 00:05: [io  0x164e-0x164f] has been reserved
>> [    0.804516] system 00:05: [io  0x5000-0x500f] has been reserved
>> [    0.804518] system 00:05: [io  0xfe00] has been reserved
>> [    0.804522] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.804544] pnp 00:06: [io  0x06a0-0x06af]
>> [    0.804546] pnp 00:06: [io  0x06b0-0x06ff]
>> [    0.804596] system 00:06: [io  0x06a0-0x06af] has been reserved
>> [    0.804599] system 00:06: [io  0x06b0-0x06ff] has been reserved
>> [    0.804602] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.804612] pnp 00:07: [io  0x0070-0x0077]
>> [    0.804618] pnp 00:07: [irq 8]
>> [    0.804650] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
>> [    0.804661] pnp 00:08: [io  0x0060]
>> [    0.804663] pnp 00:08: [io  0x0064]
>> [    0.804669] pnp 00:08: [irq 1]
>> [    0.804705] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
>> [    0.804718] pnp 00:09: [irq 12]
>> [    0.804751] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
>> [    0.804878] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
>> [    0.804881] pnp 00:0a: [mem 0xfed10000-0xfed13fff]
>> [    0.804883] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
>> [    0.804885] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
>> [    0.804887] pnp 00:0a: [mem 0xe0000000-0xefffffff]
>> [    0.804889] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
>> [    0.804891] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
>> [    0.804893] pnp 00:0a: [mem 0xfed45000-0xfed8ffff]
>> [    0.804955] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
>> [    0.804958] system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved
>> [    0.804961] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
>> [    0.804964] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
>> [    0.804967] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
>> [    0.804970] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
>> [    0.804973] system 00:0a: [mem 0xfed40000-0xfed44fff] has been reserved
>> [    0.804975] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
>> [    0.804979] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
>> [    0.805273] pnp: PnP ACPI: found 11 devices
>> [    0.805275] ACPI: ACPI bus type pnp unregistered
>> [    0.841652] PCI: max bus depth: 1 pci_try_num: 2
>> [    0.841697] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80000000-0x800000ff
>> 64bit]
>> [    0.841706] pci 0000:00:1f.3: BAR 0: set to [mem 0x80000000-0x800000ff
>> 64bit] (PCI address [0x80000000-0x800000ff])
>> [    0.841710] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
>> [    0.841713] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
>> [    0.841720] pci 0000:00:1c.0:   bridge window [mem 0xf3000000-0xf3ffffff]
>> [    0.841725] pci 0000:00:1c.0:   bridge window [mem 0xf0000000-0xf0ffffff
>> 64bit pref]
>> [    0.841732] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
>> [    0.841736] pci 0000:00:1c.2:   bridge window [io  0x3000-0x3fff]
>> [    0.841742] pci 0000:00:1c.2:   bridge window [mem 0xf4000000-0xf4ffffff]
>> [    0.841748] pci 0000:00:1c.2:   bridge window [mem 0xf1000000-0xf1ffffff
>> 64bit pref]
>> [    0.841756] pci 0000:06:00.0: BAR 6: assigned [mem 0xf2000000-0xf201ffff
>> pref]
>> [    0.841759] pci 0000:00:1c.3: PCI bridge to [bus 06-07]
>> [    0.841762] pci 0000:00:1c.3:   bridge window [io  0x4000-0x4fff]
>> [    0.841768] pci 0000:00:1c.3:   bridge window [mem 0xf5000000-0xf5ffffff]
>> [    0.841773] pci 0000:00:1c.3:   bridge window [mem 0xf2000000-0xf2ffffff
>> 64bit pref]
>> [    0.841781] pci 0000:00:1e.0: PCI bridge to [bus 08-08]
>> [    0.841783] pci 0000:00:1e.0:   bridge window [io  disabled]
>> [    0.841788] pci 0000:00:1e.0:   bridge window [mem disabled]
>> [    0.841793] pci 0000:00:1e.0:   bridge window [mem pref disabled]
>> [    0.841811] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> [    0.841817] pci 0000:00:1c.0: setting latency timer to 64
>> [    0.841826] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> [    0.841831] pci 0000:00:1c.2: setting latency timer to 64
>> [    0.841840] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
>> [    0.841845] pci 0000:00:1c.3: setting latency timer to 64
>> [    0.841853] pci 0000:00:1e.0: setting latency timer to 64
>> [    0.841857] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
>> [    0.841860] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
>> [    0.841862] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
>> [    0.841865] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
>> [    0.841867] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
>> [    0.841870] pci_bus 0000:00: resource 9 [mem 0x80000000-0xfebfffff]
>> [    0.841872] pci_bus 0000:02: resource 0 [io  0x2000-0x2fff]
>> [    0.841875] pci_bus 0000:02: resource 1 [mem 0xf3000000-0xf3ffffff]
>> [    0.841877] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit
>> pref]
>> [    0.841880] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
>> [    0.841882] pci_bus 0000:04: resource 1 [mem 0xf4000000-0xf4ffffff]
>> [    0.841885] pci_bus 0000:04: resource 2 [mem 0xf1000000-0xf1ffffff 64bit
>> pref]
>> [    0.841887] pci_bus 0000:06: resource 0 [io  0x4000-0x4fff]
>> [    0.841890] pci_bus 0000:06: resource 1 [mem 0xf5000000-0xf5ffffff]
>> [    0.841892] pci_bus 0000:06: resource 2 [mem 0xf2000000-0xf2ffffff 64bit
>> pref]
>> [    0.841895] pci_bus 0000:08: resource 4 [io  0x0000-0x0cf7]
>> [    0.841897] pci_bus 0000:08: resource 5 [io  0x0d00-0xffff]
>> [    0.841899] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
>> [    0.841902] pci_bus 0000:08: resource 7 [mem 0x000d4000-0x000d7fff]
>> [    0.841904] pci_bus 0000:08: resource 8 [mem 0x000d8000-0x000dbfff]
>> [    0.841907] pci_bus 0000:08: resource 9 [mem 0x80000000-0xfebfffff]
>> [    0.841953] NET: Registered protocol family 2
>> [    0.842026] IP route cache hash table entries: 32768 (order: 5, 131072
>> bytes)
>> [    0.842275] TCP established hash table entries: 131072 (order: 8, 1048576
>> bytes)
>> [    0.842816] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>> [    0.843051] TCP: Hash tables configured (established 131072 bind 65536)
>> [    0.843053] TCP reno registered
>> [    0.843056] UDP hash table entries: 512 (order: 2, 16384 bytes)
>> [    0.843065] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
>> [    0.843176] NET: Registered protocol family 1
>> [    0.843193] pci 0000:00:02.0: Boot video device
>> [    0.843395] PCI: CLS 64 bytes, default 64
>> [    0.843454] Unpacking initramfs...
>> [    0.880093] Freeing initrd memory: 2140k freed
>> [    0.881141] Simple Boot Flag at 0x37 set to 0x1
>> [    0.881441] apm: BIOS not found.
>> [    0.881611] audit: initializing netlink socket (disabled)
>> [    0.881625] type=2000 audit(1315248361.879:1): initialized
>> [    0.886302] highmem bounce pool size: 64 pages
>> [    0.886308] HugeTLB registered 4 MB page size, pre-allocated 0 pages
>> [    0.895724] VFS: Disk quotas dquot_6.5.2
>> [    0.895812] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>> [    0.895922] msgmni has been set to 1713
>> [    0.896120] Block layer SCSI generic (bsg) driver version 0.4 loaded
>> (major 253)
>> [    0.896151] io scheduler noop registered
>> [    0.896153] io scheduler deadline registered
>> [    0.896165] io scheduler cfq registered (default)
>> [    0.896298] pcieport 0000:00:1c.0: setting latency timer to 64
>> [    0.896351] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
>> [    0.896430] pcieport 0000:00:1c.2: setting latency timer to 64
>> [    0.896478] pcieport 0000:00:1c.2: irq 41 for MSI/MSI-X
>> [    0.896552] pcieport 0000:00:1c.3: setting latency timer to 64
>> [    0.896600] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
>> [    0.896813] intel_idle: MWAIT substates: 0x22220
>> [    0.896815] intel_idle: does not run on family 6 model 15
>> [    0.896821] ERST: Table is not found!
>> [    0.896835] isapnp: Scanning for PnP cards...
>> [    1.253172] isapnp: No Plug & Play device found
>> [    1.253235] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>> [    1.440435] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
>> 0x60,0x64 irq 1,12
>> [    1.442918] i8042: Detected active multiplexing controller, rev 1.1
>> [    1.444044] serio: i8042 KBD port at 0x60,0x64 irq 1
>> [    1.444079] serio: i8042 AUX0 port at 0x60,0x64 irq 12
>> [    1.444106] serio: i8042 AUX1 port at 0x60,0x64 irq 12
>> [    1.444132] serio: i8042 AUX2 port at 0x60,0x64 irq 12
>> [    1.444164] serio: i8042 AUX3 port at 0x60,0x64 irq 12
>> [    1.444251] mousedev: PS/2 mouse device common for all mice
>> [    1.444441] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
>> [    1.444469] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
>> [    1.444490] cpuidle: using governor ladder
>> [    1.444492] cpuidle: using governor menu
>> [    1.444735] TCP cubic registered
>> [    1.444738] NET: Registered protocol family 17
>> [    1.444745] Registering the dns_resolver key type
>> [    1.444760] Using IPI No-Shortcut mode
>> [    1.444841] PM: Hibernation image not present or could not be loaded.
>> [    1.444846] registered taskstats version 1
>> [    1.449119] rtc_cmos 00:07: setting system clock to 2011-09-05 18:46:02
>> UTC (1315248362)
>> [    1.449209] Initializing network drop monitor service
>> [    1.449294] Freeing unused kernel memory: 500k freed
>> [    1.449509] Write protecting the kernel text: 3416k
>> [    1.449533] Write protecting the kernel read-only data: 1036k
>> [    1.462206] udevd[58]: starting version 173
>> [    1.472616] input: AT Translated Set 2 keyboard as
>> /devices/platform/i8042/serio0/input/input0
>> [    1.486999] usbcore: registered new interface driver usbfs
>> [    1.487029] usbcore: registered new interface driver hub
>> [    1.499718] usbcore: registered new device driver usb
>> [    1.505879] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> [    1.505915] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) ->
>> IRQ 19
>> [    1.505938] ehci_hcd 0000:00:1a.7: setting latency timer to 64
>> [    1.505943] ehci_hcd 0000:00:1a.7: EHCI Host Controller
>> [    1.505978] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
>> number 1
>> [    1.506012] ehci_hcd 0000:00:1a.7: debug port 1
>> [    1.520660] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
>> [    1.520687] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf6704800
>> [    1.538108] SCSI subsystem initialized
>> [    1.546834] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
>> [    1.546995] hub 1-0:1.0: USB hub found
>> [    1.547001] hub 1-0:1.0: 6 ports detected
>> [    1.547104] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) ->
>> IRQ 23
>> [    1.547126] ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> [    1.547130] ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> [    1.547140] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
>> number 2
>> [    1.547170] ehci_hcd 0000:00:1d.7: debug port 1
>> [    1.550183] libata version 3.00 loaded.
>> [    1.551067] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
>> [    1.551088] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf6704c00
>> [    1.563355] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> [    1.563518] hub 2-0:1.0: USB hub found
>> [    1.563523] hub 2-0:1.0: 6 ports detected
>> [    1.563616] ahci 0000:00:1f.2: version 3.0
>> [    1.563633] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> [    1.563690] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
>> [    1.563773] ahci: SSS flag set, parallel bus scan disabled
>> [    1.563814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps
>> 0x33 impl SATA mode
>> [    1.563818] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio
>> slum part ccc ems sxs
>> [    1.563824] ahci 0000:00:1f.2: setting latency timer to 64
>> [    1.583998] scsi0 : ahci
>> [    1.584102] scsi1 : ahci
>> [    1.584177] scsi2 : ahci
>> [    1.584249] scsi3 : ahci
>> [    1.584322] scsi4 : ahci
>> [    1.584397] scsi5 : ahci
>> [    1.584462] ata1: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704100
>> irq 43
>> [    1.584466] ata2: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704180
>> irq 43
>> [    1.584468] ata3: DUMMY
>> [    1.584470] ata4: DUMMY
>> [    1.584472] ata5: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704300
>> irq 43
>> [    1.584476] ata6: SATA max UDMA/133 abar m2048@0xf6704000 port 0xf6704380
>> irq 43
>> [    1.592366] uhci_hcd: USB Universal Host Controller Interface driver
>> [    1.592434] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) ->
>> IRQ 16
>> [    1.592444] uhci_hcd 0000:00:1a.0: setting latency timer to 64
>> [    1.592448] uhci_hcd 0000:00:1a.0: UHCI Host Controller
>> [    1.592460] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
>> number 3
>> [    1.592506] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
>> [    1.592668] hub 3-0:1.0: USB hub found
>> [    1.592672] hub 3-0:1.0: 2 ports detected
>> [    1.592752] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) ->
>> IRQ 21
>> [    1.592758] uhci_hcd 0000:00:1a.1: setting latency timer to 64
>> [    1.592762] uhci_hcd 0000:00:1a.1: UHCI Host Controller
>> [    1.592770] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
>> number 4
>> [    1.592806] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
>> [    1.592939] hub 4-0:1.0: USB hub found
>> [    1.592943] hub 4-0:1.0: 2 ports detected
>> [    1.593020] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 19 (level, low) ->
>> IRQ 19
>> [    1.593028] uhci_hcd 0000:00:1a.2: setting latency timer to 64
>> [    1.593031] uhci_hcd 0000:00:1a.2: UHCI Host Controller
>> [    1.593038] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus
>> number 5
>> [    1.593066] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
>> [    1.593196] hub 5-0:1.0: USB hub found
>> [    1.593201] hub 5-0:1.0: 2 ports detected
>> [    1.593271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) ->
>> IRQ 23
>> [    1.593280] uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> [    1.593283] uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> [    1.593291] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
>> number 6
>> [    1.593318] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
>> [    1.593473] hub 6-0:1.0: USB hub found
>> [    1.593481] hub 6-0:1.0: 2 ports detected
>> [    1.593553] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) ->
>> IRQ 19
>> [    1.593560] uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> [    1.593564] uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> [    1.593571] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
>> number 7
>> [    1.593598] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
>> [    1.593730] hub 7-0:1.0: USB hub found
>> [    1.593734] hub 7-0:1.0: 2 ports detected
>> [    1.593805] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) ->
>> IRQ 18
>> [    1.593812] uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> [    1.593815] uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> [    1.593823] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
>> number 8
>> [    1.593858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
>> [    1.593991] hub 8-0:1.0: USB hub found
>> [    1.593995] hub 8-0:1.0: 2 ports detected
>> [    1.853355] usb 1-3: new high speed USB device number 2 using ehci_hcd
>> [    1.883353] Refined TSC clocksource calibration: 2161.249 MHz.
>> [    1.883358] Switching to clocksource tsc
>> [    1.903355] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    1.910290] ata1.00: ATA-8: SAMSUNG HM250JI, HS100-06, max UDMA7
>> [    1.910293] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth
>> 31/32), AA
>> [    1.917293] ata1.00: configured for UDMA/133
>> [    1.917425] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HM250JI
>>  HS10 PQ: 0 ANSI: 5
>> [    2.236685] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>> [    2.237177] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633A, SC05, max UDMA/100
>> [    2.237181] ata2.00: applying bridge limits
>> [    2.238190] ata2.00: configured for UDMA/100
>> [    2.241329] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW TS-L633A
>>  SC05 PQ: 0 ANSI: 5
>> [    2.560020] ata5: SATA link down (SStatus 0 SControl 300)
>> [    2.823345] usb 8-2: new full speed USB device number 2 using uhci_hcd
>> [    2.880017] ata6: SATA link down (SStatus 0 SControl 300)
>> [    2.886320] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250
>> GB/232 GiB)
>> [    2.886370] sd 0:0:0:0: [sda] Write Protect is off
>> [    2.886373] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
>> [    2.886395] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
>> doesn't support DPO or FUA
>> [    2.918787]  sda: sda1 sda2 sda3 sda4
>> [    2.919129] sd 0:0:0:0: [sda] Attached SCSI disk
>> [    2.924124] sr0: scsi3-mmc drive: 16x/24x writer dvd-ram cd/rw xa/form2
>> cdda tray
>> [    2.924129] cdrom: Uniform CD-ROM driver Revision: 3.20
>> [    2.924305] sr 1:0:0:0: Attached scsi CD-ROM sr0
>> [    3.607096] EXT4-fs (sda4): mounted filesystem with ordered data mode.
>> Opts: (null)
>> [    5.230165] udevd[290]: starting version 173
>> [    5.518200] ACPI: acpi_idle registered with cpuidle
>> [    5.520415] Monitor-Mwait will be used to enter C-1 state
>> [    5.520443] Monitor-Mwait will be used to enter C-2 state
>> [    5.520467] Monitor-Mwait will be used to enter C-3 state
>> [    5.520473] Marking TSC unstable due to TSC halts in idle
>> [    5.520502] Switching to clocksource hpet
>> [    5.953359] input: Lid Switch as
>> /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
>> [    5.953411] ACPI: Lid Switch [LID0]
>> [    5.953486] input: Power Button as
>> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
>> [    5.953493] ACPI: Power Button [PWRB]
>> [    5.953547] input: Sleep Button as
>> /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
>> [    5.953551] ACPI: Sleep Button [SLPB]
>> [    5.953598] input: Power Button as
>> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
>> [    5.953602] ACPI: Power Button [PWRF]
>> [    5.956873] ACPI: Deprecated procfs I/F for AC is loaded, please retry
>> with CONFIG_ACPI_PROCFS_POWER cleared
>> [    5.957918] ACPI: AC Adapter [ADP1] (on-line)
>> [    5.959566] ACPI: Deprecated procfs I/F for battery is loaded, please
>> retry with CONFIG_ACPI_PROCFS_POWER cleared
>> [    5.959574] ACPI: Battery Slot [BAT1] (battery present)
>> [    6.033129] Linux agpgart interface v0.103
>> [    6.119998] Samsung-backlight: checking for SABI support.
>> [    6.120080] Samsung-backlight: SABI is supported (f48da)
>> [    6.135051] ACPI: Fan [FAN0] (off)
>> [    6.135051] ACPI: Fan [FAN1] (off)
>> [    6.136620] thermal LNXTHERM:00: registered as thermal_zone0
>> [    6.136623] ACPI: Thermal Zone [TZ00] (51 C)
>> [    6.137129] thermal LNXTHERM:01: registered as thermal_zone1
>> [    6.137132] ACPI: Thermal Zone [TZ01] (51 C)
>> [    6.179014] iTCO_vendor_support: vendor-support=0
>> [    6.180282] sky2: driver version 1.28
>> [    6.180367] sky2 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> [    6.180415] sky2 0000:06:00.0: setting latency timer to 64
>> [    6.180500] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
>> [    6.181160] sky2 0000:06:00.0: irq 44 for MSI/MSI-X
>> [    6.181804] sky2 0000:06:00.0: eth0: addr 00:13:77:b0:56:1b
>> [    6.192207] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
>> [    6.192301] iTCO_wdt: Found a ICH9M TCO device (Version=2,
>> TCOBASE=0x0460)
>> [    6.192372] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>> [    6.193704] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
>> [    6.193833] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K
>> total, 262144K mappable
>> [    6.194690] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
>> [    6.194928] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
>> [    6.425225] sd 0:0:0:0: Attached scsi generic sg0 type 0
>> [    6.425274] sr 1:0:0:0: Attached scsi generic sg1 type 5
>> [    6.580684] cfg80211: Calling CRDA to update world regulatory domain
>> [    6.635902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) ->
>> IRQ 22
>> [    6.636049] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>> [    6.636080] HDA Intel 0000:00:1b.0: setting latency timer to 64
>> [    6.771772] [drm] Initialized drm 1.1.0 20060810
>> [    6.791280] ath5k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ
>> 16
>> [    6.791294] ath5k 0000:02:00.0: setting latency timer to 64
>> [    6.791349] ath5k 0000:02:00.0: registered as 'phy0'
>> [    6.889672] input: PC Speaker as /devices/platform/pcspkr/input/input5
>> [    6.925987] Bluetooth: Core ver 2.16
>> [    6.926189] NET: Registered protocol family 31
>> [    6.926191] Bluetooth: HCI device and connection manager initialized
>> [    6.926194] Bluetooth: HCI socket layer initialized
>> [    6.926196] Bluetooth: L2CAP socket layer initialized
>> [    6.926264] Bluetooth: SCO socket layer initialized
>> [    6.964060] Bluetooth: Generic Bluetooth USB driver ver 0.6
>> [    6.965950] usbcore: registered new interface driver btusb
>> [    6.970145] hda_codec: ALC262: BIOS auto-probing.
>> [    6.970705] input: HDA Digital PCBeep as
>> /devices/pci0000:00/0000:00:1b.0/input/input6
>> [    6.984416] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
>> [    6.987488] input: HDA Intel HDMI/DP as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
>> [    6.987617] input: HDA Intel Mic as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
>> [    6.987738] input: HDA Intel Headphone as
>> /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
>> [    6.988095] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> [    6.988101] i915 0000:00:02.0: setting latency timer to 64
>> [    7.024656] i915 0000:00:02.0: irq 46 for MSI/MSI-X
>> [    7.024663] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
>> [    7.024665] [drm] Driver supports precise vblank timestamp query.
>> [    7.024709] vgaarb: device changed decodes:
>> PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
>> [    7.203465] Linux media interface: v0.10
>> [    7.234519] Linux video capture interface: v2.00
>> [    7.327490] ath: EEPROM regdomain: 0x65
>> [    7.327493] ath: EEPROM indicates we should expect a direct regpair map
>> [    7.327497] ath: Country alpha2 being used: 00
>> [    7.327499] ath: Regpair used: 0x65
>> [    7.341089] uvcvideo: Found UVC 1.00 device USB2.0 UVC PC Camera
>> (174f:5931)
>> [    7.357835] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1c0b1, caps:
>> 0xa04711/0xa00000/0x0
>> [    7.364659] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
>> [    7.364971] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
>> [    7.394585] input: SynPS/2 Synaptics TouchPad as
>> /devices/platform/i8042/serio4/input/input10
>> [    7.396181] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported.
>> Enabling workaround.
>> [    7.414784] usbcore: registered new interface driver uvcvideo
>> [    7.414787] USB Video Class driver (v1.1.0)
>> [    7.794860] fbcon: inteldrmfb (fb0) is primary device
>> [    7.838481] Console: switching to colour frame buffer device 160x50
>> [    7.842933] fb0: inteldrmfb frame buffer device
>> [    7.842935] drm: registered panic notifier
>> [    7.843838] input: Video Bus as
>> /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input11
>> [    7.843904] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post:
>> no)
>> [    7.843995] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on
>> minor 0
>> [    7.844028] 0: no IPv6 routers present
>> [ 1252.792111] agrmodem: module license 'Proprietary' taints kernel.
>> [ 1252.792116] Disabling lock debugging due to kernel taint
>> [ 1252.794659] agrmodem: Unknown symbol usb_free_urb (err 0)
>> [ 1252.794696] agrmodem: Unknown symbol usb_get_dev (err 0)
>> [ 1252.794731] agrmodem: Unknown symbol usb_free_coherent (err 0)
>> [ 1252.794765] agrmodem: Unknown symbol usb_deregister (err 0)
>> [ 1252.794845] agrmodem: Unknown symbol usb_control_msg (err 0)
>> [ 1252.794879] agrmodem: Unknown symbol usb_set_interface (err 0)
>> [ 1252.794941] agrmodem: Unknown symbol snd_hda_codec_read (err 0)
>> [ 1252.794979] agrmodem: Unknown symbol usb_alloc_coherent (err 0)
>> [ 1252.795015] agrmodem: Unknown symbol usb_submit_urb (err 0)
>> [ 1252.795046] agrmodem: Unknown symbol usb_register_driver (err 0)
>> [ 1252.795087] agrmodem: Unknown symbol snd_hda_codec_write (err 0)
>> [ 1252.795124] agrmodem: Unknown symbol usb_alloc_urb (err 0)
>> [ 1252.795161] agrmodem: Unknown symbol usb_put_dev (err 0)
>>
>>
>>
> 

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux