Jeff If necessary, run the dgcmodem install again, without the USB modem attached. Attach the USB modem. Run $ dmesg Are any modem cogent messages at the end? If yes, run $ sudo wvdialconf wvtest.txt MarvS On Sat, Aug 27, 2011 at 10:00 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: > > Hi Marv, > > 1) > installing hsfmodem_7.80.02.06full_i386.deb with dpkg, I get > "ERROR: Module build failed! > Please examine the log file "/etc/hsfmodem/log/buildlog-20110827173945.txt" > to determine why." > > 2) > I clicked on the .deb file and reinstalled it through synaptic package > manager, and it gave me no eror message, but hsfconfig gave me the error as > above. (Module build failed) > > 3) > so I went to the Ubuntu Conexant link. They start by confirming that his HSF > modem (USB in this case) is recognized b the system. But how can I do > that???? > > ...and after making the substitutions they recommend and running hsfconfig I > got the familiar: > "Warning: no device detected by hsf driver - HDA modems may require reboot > Note: HDA support not compiled in the driver" > > Can I help it find my device somehow, as ScanModem finds it? Is it certain > that this last process can be effective? or might it work only for USB > modems? What kind? > > Many thanks, > > Jeff > > > -----Original Message----- > From: Jeffrey Cohan <cohanjeffrey@xxxxxxx> > To: marvin.stodolsky@xxxxxxxxx > Cc: discuss@xxxxxxxxxxxxx; olivares14031@xxxxxxxxx > Sent: Sat, Aug 27, 2011 3:29 pm > Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > > Hi Marv, > > I actually never had a > /usr/lib/hcfpcimodem/ > folder on my system. I misled you by giving in my email the list of > substitutions that Jonathan gave, instead of the ones I ACTUALLY did for > which I substituted /hsfmodem/ (the same files existed in this folder). > Sorry. But perhaps it is a good idea to clean up - I'll do so and reinstall! > Should I follow the substitution advice from the 11.04 link on the > DialupModemHowtoConexant page as before? If I don't hear from you I'll try > installing it before and then after these fixes. > Thanks, > Jeff > > (and I could reinstall Ubuntu if you think I might have corrupted something) > > > -----Original Message----- > From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> > To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> > Cc: discuss@xxxxxxxxxxxxx; olivares14031@xxxxxxxxx > Sent: Sat, Aug 27, 2011 2:56 pm > Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? > > Jeff > > Installing the hsfmodem on my System, there was not created a folder > /usr/lib/hcfpcimodem/ > So some odd remnants seem to be on your System > > I suggest doing uninstalls on all your modem packages , just to clean up > To get the Names for the uninstalls, do > $ sudo apt-cache search hsf > which will display the installaled package Name > Then > $ sudo apt-get remove Name > will uninstall it. > > Repeat with: > $ sudo apt-cache search hcf > etc. > > Then please again try the install of the hsfmodem package > > MarvS > > On Sat, Aug 27, 2011 at 5:31 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> wrote: >> Hi Marv, >> >> Actually the HP is the 64-bit machine withthe 11c11040 chip. On the VAIO I >> did use >> hsfmodem-7.80.02.06full.tar.gz >> which I'm guessing is correct for the 32-bit Vaio, and I followed exactly >> the instructions on the "for Ubuntu 11.04" link on the >> DialupModemHowtoConexant page, making substitutions called for, and got >> "Warning: no device detected by hsf driver - HDA modems may require >> reboot" >> and "Note: HDA support not compiled in the driver" >> - exactly as when I had previously followed Jonathan's slightly different >> substitutions. Ah, you were confused as I did in fact make these changes >> in >> the hsfmodem folder and not an hcfmodem folder, which I did not have. >> >> But perhaps I did successfully install the USB modem package? (see last >> email) Hope so... >> >> Jeff >> >> >> -----Original Message----- >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx>; Linmodems >> <discuss@xxxxxxxxxxxxx> >> Sent: Sat, Aug 27, 2011 1:58 pm >> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >> >> Jeff >> >> Let's summarize and clarify some issues. >> With respect to the VIAO PC x86_64 , with the 11c11040 modem chip >> there is no support. If you want to install the 32 bit Ubuntu variant on >> this PC >> there may be support. We haven't had a clean test since Antonio did a >> code update, >> but compilng is OK on Ubuntu Natty 32 bit >> >> With respect to the HP PC with the the Conexant chip modem, >> the code package which you should be using is >> hsfmodem-7.80.02.06x86_64full.tar.gz, >> obtained from the bottom of >> http://www.linuxant.com/drivers/hsf/full/downloads.php >> >> Is this the package on which you are having the compile problems? >> >> I am confused about your description of the attempted fixes, >> because they were done on files like >>> - /usr/lib/hcfpcimodem/modules/osnvm.c >> but that is hcfpcimodem code, while cogent changes if any should be on >> a hsfmodem code >> >> MarvS >> >> >> On Sat, Aug 27, 2011 at 4:43 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >> wrote: >>> Hi Antonio! >>> >>> in response I get >>> GNU grep 2.6.3 >>> License GPLv3+: GNU GPL version 3 or later >>> >>> ...so all is ok? I'm trying to install dgcmodem_1.13_i386.deb which I >>> have >>> unzipped but can't yet get dpkg to work (I get "dpkg: error: need an >>> action >>> option") and will let you know how it goes. Again, I'd be happy to >>> re-install Ubuntu if necessary. >>> >>> Jeff >>> >>> >>> -----Original Message----- >>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>> Cc: discuss@xxxxxxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>> support@xxxxxxxxxxxx >>> Sent: Sat, Aug 27, 2011 1:20 pm >>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>> >>> Jeffrey, >>> >>> I made a BOO-BOO(mistake), instead of uname -a , dmesg | grep 'gcc' >>> hen gcc --version like >>> >>> [olivares@acer-aspire-1 ~]$ dmesg | grep 'gcc' >>> [ 0.000000] Linux version 2.6.40-4.fc15.i686 >>> (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.6.0 20110530 >>> (Red Hat 4.6.0-9) (GCC) ) #1 SMP Fri Jul 29 18:54:39 UTC 2011 >>> [olivares@acer-aspire-1 ~]$ gcc --version >>> gcc (GCC) 4.6.0 20110603 (Red Hat 4.6.0-10) >>> Copyright (C) 2011 Free Software Foundation, Inc. >>> This is free software; see the source for copying conditions. There is >>> NO >>> warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR >>> PURPOSE. >>> >>> [olivares@acer-aspire-1 ~]$ >>> >>> Notice that the gcc versions do match :) >>> >>> You may pursue to try Marv's suggestion linuxant's usb drivers and see >>> if they work. >>> >>> Regards, >>> >>> Antonio >>> >>> On Sat, Aug 27, 2011 at 1:47 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>> wrote: >>>> Antonio, here's what I get - do these correspond? >>>> >>>> uname -a >>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri Jul >>>> 29 >>>> 19:05:14 UTC 2011 i686 i686 i386 GNU/Linux >>>> >>>> gcc --version >>>> gcc (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>> Copyright (C) 2010 Free Software Foundation, Inc. >>>> >>>> I'll gladly reinstall anything! and will look at your other options as >>>> well. >>>> Thanks, >>>> >>>> Jeffrey >>>> - - - - - - >>>> >>>> Jeffrey, >>>> >>>> On Sat, Aug 27, 2011 at 11:42 AM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>> wrote: >>>> >>>>> Good morning Antonio! I found something from you about the USRobotics >>>>> USR5637 USB modem, and I'm assuming that DIDN'T work out on Ubuntu >>>>> 11.04? >>>>> I >>>>> don't find anything on the web that confirms that any other USB modem >>>>> does >>>>> work. Or a replacement internal one for the VAIO? >>>>> >>>>> I'm reluctant to install an older Ubuntu version as you suggest Marv as >>>>> sooner or later it would not be supported, because it would take so >>>>> much >>>>> time to go back and forth unless one version can be accessed within >>>>> another >>>>> (at home I have only dial-up and use it many times each day) and >>>>> because >>>>> of >>>>> a potential problem with Thunderbird: due to family needs I go between >>>>> the >>>>> 2 >>>>> laptops (I can check email via wifi when not at home), must keep my >>>>> Thunderbird profile on an external drive, and the profile has been >>>>> severely >>>>> compromised when accessed through different systems/versions (I'd like >>>>> to >>>>> have the latest Ubuntu on both machines, and do need to use both to run >>>>> ALL >>>>> of my software). If it were for the occasional fax, this option would >>>>> be >>>>> fine. >>>>> >>>> >>>> Maybe you can install an older kernel, for the meantime to give some >>>> time for a fix. >>>> >>>>> >>>>> So I'll assume that the message: >>>>> no device detected by hsf driver - HDA modems may require reboot >>>>> Note: HDA support not compiled in the driver >>>>> >>>>> ...leads me too a dead end. On both computers, alas. >>>>> >>>>> On this page: >>>>> https://help.ubuntu.com/community/DialupModemHowto/Conexant >>>>> shouldn't this link: >>>>> For Ubuntu 11.04 (Natty Narwhal): You can follow the steps on this >>>>> thread. >>>>> : >>>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>>> be removed? or why would it not work in my case? >>>>> >>>> >>>> Might be due to some kernel problem* , kernel devel package/kernel >>>> headers, some type of mismatch when I see the errors in the messages >>>> that you have sent us: >>>> >>>> <quote> >>>> alsa-driver-linuxant_1.0.23.1_all.deb: >>>> ----in terminal: >>>> Building modules for the 2.6.38-11-generic kernel, please wait... done. >>>> ERROR: Build failed. Please review the build log at >>>> /tmp/alsa-driver-linuxant.26528.log >>>> dpkg: error processing alsa-driver-linuxant (--install): >>>> subprocess installed post-installation script returned error exit >>>> status >>>> 2 >>>> ----in log file: >>>> checking for GCC version... Kernel compiler: Used compiler: gcc >>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>> *** Assuming the same compiler is used with the current system compiler. >>>> *** Please make sure that the same compiler version was used for >>>> building kernel. >>>> and later... >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>>> ‘snd_pcm_hw_params’: >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>>> implicit declaration of function ‘pm_qos_remove_requirement’ >>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>>> implicit declaration of function ‘pm_qos_add_requirement’ >>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error 1 >>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>>> make: *** [compile] Error 2 >>>> </quote> >>>> >>>> This line ``*** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>> *** Assuming the same compiler is used with the current system compiler. >>>> *** Please make sure that the same compiler version was used for >>>> building kernel. >>>> '' is the one that makes me believe that the running kernel is not the >>>> same gcc as the one in the system. In this case and in others it is >>>> important that the running kernel and the gcc be the same so that no >>>> errors occurs. If you can you can confirm >>>> >>>> run >>>> $ uname -a >>>> and >>>> $ gcc --version >>>> >>>> and that may tell us why things are not working. To get it working, >>>> the kernel and the gcc must be the same. >>>> >>>> If you want and have access to a livecd like >>>> Knoppix/Slax/Porteus/Puppy/..., you can use some of these at least to >>>> get a connection to internet via dialup. Puppy in many cases has out >>>> of box support for many winmodems. In porteus I have successfully >>>> built some buildscripts to build a module that will make the modems >>>> work. Some modems except the hsf/hcf modems since these are >>>> proprietary, except for the 14 kbps one but that one many people would >>>> get mad in the case that it is built(they would want full speed, and >>>> it is a difficult to accomodate to many people*). One person built >>>> such a module for slax, but I have no status for it as Slax has not >>>> been updated for a while. Without screwing up your running system >>>> and/or installing again you may try out one livecd(if you can get one) >>>> and try the driver and see if you can make the modem work and connect >>>> via dialup or install a kernel that matches gcc and try the fixes >>>> again. >>>> >>>> * unless you have a Dell machine, then you can use the oem drivers and >>>> you can get full speed on the modem. >>>> >>>> If you have a cell phone, you may also use it as a modem to connect to >>>> internet. In ModemData.txt, there is a report you can see : >>>> >>>> If a cellphone is not detected, see >>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>> A sample report is: >>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>>> >>>> Don't get discouraged, a little bit of patience can go a long way. I >>>> almost forgot, you can also virtualize a version of linux and with an >>>> older kernel you can run an older installation along with your current >>>> one and have a working dialup connection on that one with a working >>>> driver. These are things you can take a look at. >>>> >>>> When there were no fixes for smartlink modem after kernel 2.6.30/31, I >>>> used Slax livecd with older kernel to access the internet and then >>>> later the fixes came along thanks to a person that figured things out. >>>> You may try to do something similar and not be left without internet >>>> for a fix to come in the meantime. Hang in there! You can do it. >>>> >>>> Regards, >>>> >>>> >>>> >>>> Antonio >>>> >>>>> >>>>> I've much appreciated your advice - thanks! >>>>> >>>>> Jeff >>>>> >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: cohanjeffrey@xxxxxxx >>>>> To: olivares14031@xxxxxxxxx; marvin.stodolsky@xxxxxxxxx; >>>>> discuss@xxxxxxxxxxxxx; support@xxxxxxxxxxxx >>>>> Sent: Fri, Aug 26, 2011 7:23 pm >>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>> >>>>> Thank you Antonio and Marv - really appreciate it! >>>>> >>>>> After another full day I'll try to take your advice tomorrow Marv, and >>>>> it >>>>> seems from Ganton at >>>>> http://ubuntuforums.org/showthread.php?t=1597605&page=4 >>>>> that the most recent kernel that will work will be Ubuntu 10.10. Or >>>>> could >>>>> I >>>>> buy an external modem on ebay that is said to work on Linux? If you >>>>> have >>>>> further ideas after reading what follows (especially, re "Warning: no >>>>> device >>>>> detected by hsf driver - HDA modems may require reboot" and "Note: HDA >>>>> support not compiled in the driver"), I would be most grateful! >>>>> >>>>> Today I removed alsa-driver-linuxant and installed >>>>> hsfmodem-7.80.02.06full, >>>>> and got code similar to yours Antonio. >>>>> >>>>> But an "hsfconfig" resulted in (excerpts): >>>>> Conexant HSF softmodem driver, version 7.80.02.06full >>>>> When reporting a problem for the first time, please send >>>>> us the file generated by "hsfconfig --dumpdiag". >>>>> No pre-built modules for: Ubuntu-11.04 linux-2.6.38-11-generic i686-SMP >>>>> ...and the punchline: >>>>> ERROR: Module build failed! >>>>> - - - >>>>> buildlog excerpts: >>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared here >>>>> (not >>>>> in a function) >>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>>>> >>>>> so I again did this: >>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>>> replace .ioctl with .compat_ioctl in: >>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>>> >>>>> and "hsfconfig" got... >>>>> Warning: no device detected by hsf driver - HDA modems may require >>>>> reboot >>>>> Note: HDA support not compiled in the driver >>>>> >>>>> then I ran everything (whew!) from "Ganton's Avatar" at >>>>> http://ubuntuforums.org/showthread.php?t=1781268 >>>>> and again got exactly the same message with "hsfconfig" >>>>> (issue not [SOLVED] as stated) >>>>> >>>>> with another hsfconfig, it asked >>>>> Warning: existing driver modules found under: >>>>> /lib/modules/2.6.38-11-generic/ >>>>> Would you like to keep using them? [no] >>>>> ...and I pressed [enter] >>>>> but got similar results >>>>> - - - (end of exploits for the day, besides a little blackberry >>>>> picking)- >>>>> - - - - - >>>>> >>>>> Thanks again for helping, >>>>> >>>>> Jeff >>>>> >>>>> >>>>> >>>>> -----Original Message----- >>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>>> To: cohanjeffrey@xxxxxxx >>>>> Cc: discuss@xxxxxxxxxxxxx; Linuxant support (Jonathan) >>>>> <support@xxxxxxxxxxxx>; Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >>>>> Sent: Thu, Aug 25, 2011 6:56 pm >>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>>> >>>>> >>>>> >>>>> >>>>> Jeffrey, >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Something is strange. I try the package (hsf) and it runs for me, I >>>>> >>>>> >>>>> >>>>> can't find errors: >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ su -c 'make install' >>>>> >>>>> >>>>> >>>>> Password: >>>>> >>>>> >>>>> >>>>> make[1]: Entering directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>>> >>>>> >>>>> >>>>> mkdir -m 755 -p cvt >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfpcibasic2.inf | ./cvtinf.pl cvt/hsfpcibasic2; if [ -n >>>>> >>>>> >>>>> >>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2 < "inf/hsf.cty"; >>>>> >>>>> >>>>> >>>>> else true; fi >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfpcibasic2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>>> >>>>> >>>>> >>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' -e >>>>> >>>>> >>>>> >>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic2/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfpcibasic2smart.inf | ./cvtinf.pl cvt/hsfpcibasic2smart; if [ -n >>>>> >>>>> >>>>> >>>>> "" ]; then ./cvtinf.pl cvt/hsfpcibasic2smart < ""; else true; fi >>>>> >>>>> >>>>> >>>>> if [ -d cvt/hsfpcibasic2/Profile ]; then ln -sf >>>>> >>>>> >>>>> >>>>> ../hsfpcibasic2/Profile cvt/hsfpcibasic2smart/.; else true; fi >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2smart/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfpcibasic2smart/Region && grep -v -l '*' *NAME | sed -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' >>>>> >>>>> >>>>> >>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>>> >>>>> >>>>> >>>>> cvt/hsfpcibasic2smart/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfpcibasic2hsfi.inf | ./cvtinf.pl cvt/hsfpcibasic2hsfi; if [ -n >>>>> >>>>> >>>>> >>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2hsfi < >>>>> >>>>> >>>>> >>>>> "inf/hsf.cty"; else true; fi >>>>> >>>>> >>>>> >>>>> rm -rf cvt/hsfpcibasic2hsfi/Region >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2hsfi/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfpcibasic2hsfi/Region && grep -v -l '*' *NAME | sed -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' >>>>> >>>>> >>>>> >>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>>> >>>>> >>>>> >>>>> cvt/hsfpcibasic2hsfi/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfpcibasic2bry.inf | ./cvtinf.pl cvt/hsfpcibasic2bry; if [ -n >>>>> >>>>> >>>>> >>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic2bry < "inf/hsf.cty"; >>>>> >>>>> >>>>> >>>>> else true; fi >>>>> >>>>> >>>>> >>>>> rm -rf cvt/hsfpcibasic2bry/Region >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic2bry/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfpcibasic2bry/Region && grep -v -l '*' *NAME | sed -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' >>>>> >>>>> >>>>> >>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>>> >>>>> >>>>> >>>>> cvt/hsfpcibasic2bry/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfpcibasic3.inf | ./cvtinf.pl cvt/hsfpcibasic3; if [ -n >>>>> >>>>> >>>>> >>>>> "inf/hsf.cty" ]; then ./cvtinf.pl cvt/hsfpcibasic3 < "inf/hsf.cty"; >>>>> >>>>> >>>>> >>>>> else true; fi >>>>> >>>>> >>>>> >>>>> rm -rf cvt/hsfpcibasic3/Region >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfpcibasic3/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfpcibasic3/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>>> >>>>> >>>>> >>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' -e >>>>> >>>>> >>>>> >>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfpcibasic3/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfmc97ich.inf | ./cvtinf.pl cvt/hsfmc97; if [ -n "" ]; then >>>>> >>>>> >>>>> >>>>> ./cvtinf.pl cvt/hsfmc97 < ""; else true; fi >>>>> >>>>> >>>>> >>>>> rm -f mc97/HW_ADAPTER_TYPE >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfmc97/. >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfmc97/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfmc97/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>>> >>>>> >>>>> >>>>> -e 's/$/"/' ; echo "") > cvt/hsfmc97/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ali >>>>> >>>>> >>>>> >>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ati >>>>> >>>>> >>>>> >>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97ich >>>>> >>>>> >>>>> >>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97sis >>>>> >>>>> >>>>> >>>>> ln -sf `basename cvt/hsfmc97` cvt/hsfmc97via >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfcadmus2.inf | ./cvtinf.pl cvt/hsfcadmus2; if [ -n "" ]; then >>>>> >>>>> >>>>> >>>>> ./cvtinf.pl cvt/hsfcadmus2 < ""; else true; fi >>>>> >>>>> >>>>> >>>>> rm -f cadmus2/HW_ADAPTER_TYPE >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Profile cvt/hsfcadmus2/. >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2/Region cvt/hsfcadmus2/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfcadmus2/Region && grep -v -l '*' *NAME | sed -e 's/^0//' >>>>> >>>>> >>>>> >>>>> -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' -e >>>>> >>>>> >>>>> >>>>> 's/^/"/' -e 's/$/"/' ; echo "") > cvt/hsfcadmus2/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfcadmus2smart.inf | ./cvtinf.pl cvt/hsfcadmus2smart; if [ -n "" >>>>> >>>>> >>>>> >>>>> ]; then ./cvtinf.pl cvt/hsfcadmus2smart < ""; else true; fi >>>>> >>>>> >>>>> >>>>> rm -f cadmus2smart/HW_ADAPTER_TYPE >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfcadmus2smart/. >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfcadmus2smart/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfcadmus2smart/Region && grep -v -l '*' *NAME | sed -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' >>>>> >>>>> >>>>> >>>>> -e 's/^/"/' -e 's/$/"/' ; echo "") > >>>>> >>>>> >>>>> >>>>> cvt/hsfcadmus2smart/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> sed -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' -e >>>>> >>>>> >>>>> >>>>> 's!@CNXTTARGET@!hsf!g' -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' < >>>>> >>>>> >>>>> >>>>> inf/hsfhda.inf | ./cvtinf.pl cvt/hsfhda; if [ -n "" ]; then >>>>> >>>>> >>>>> >>>>> ./cvtinf.pl cvt/hsfhda < ""; else true; fi >>>>> >>>>> >>>>> >>>>> rm -f hda/HW_ADAPTER_TYPE >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Profile cvt/hsfhda/. >>>>> >>>>> >>>>> >>>>> ln -sf ../hsfpcibasic2smart/Region cvt/hsfhda/. >>>>> >>>>> >>>>> >>>>> (cd cvt/hsfhda/Region && grep -v -l '*' *NAME | sed -e 's/^0//' -e >>>>> >>>>> >>>>> >>>>> 's/^0//' -e 's/_NAME$//' | tr ' >>>>> ' ',' | sed -e 's/,$//' -e 's/^/"/' >>>>> >>>>> >>>>> >>>>> -e 's/$/"/' ; echo "") > cvt/hsfhda/COUNTRY_CODE_LIST >>>>> >>>>> >>>>> >>>>> cd cvt && find . -type f ! -empty -exec md5sum {} ';' | sort | >>>>> >>>>> >>>>> >>>>> while read sum file ; do >>>>> >>>>> >>>>> >>>>> if [ "$sum" = "$prevsum" ] && cmp -s "$file" "$prevfile"; then >>>>> >>>>> >>>>> >>>>> rm -f "$file"; >>>>> >>>>> >>>>> >>>>> if ! ln "$prevfile" "$file"; then >>>>> >>>>> >>>>> >>>>> echo 2>&1 "$0: ln FAILED - recreate $file based on >>>>> $prevfile"; >>>>> >>>>> >>>>> >>>>> exit 1; >>>>> >>>>> >>>>> >>>>> fi; >>>>> >>>>> >>>>> >>>>> else >>>>> >>>>> >>>>> >>>>> prevsum="$sum"; >>>>> >>>>> >>>>> >>>>> prevfile="$file"; >>>>> >>>>> >>>>> >>>>> fi; >>>>> >>>>> >>>>> >>>>> done >>>>> >>>>> >>>>> >>>>> touch cvt/.linksame >>>>> >>>>> >>>>> >>>>> mkdir -m 755 -p /etc/hsfmodem/nvm >>>>> >>>>> >>>>> >>>>> cd cvt && (find hsfpcibasic2 hsfpcibasic2smart hsfpcibasic2hsfi >>>>> >>>>> >>>>> >>>>> hsfpcibasic2bry hsfpcibasic3 hsfmc97 hsfmc97ali hsfmc97ati >>>>> >>>>> >>>>> >>>>> hsfmc97ich hsfmc97sis hsfmc97via hsfcadmus2 hsfcadmus2smart >>>>> >>>>> >>>>> >>>>> hsfhda | cpio -pdmu /etc/hsfmodem/nvm) >>>>> >>>>> >>>>> >>>>> 127 blocks >>>>> >>>>> >>>>> >>>>> make[1]: Leaving directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/nvm' >>>>> >>>>> >>>>> >>>>> make[1]: Entering directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < patcher.in > patcher >>>>> >>>>> >>>>> >>>>> chmod --reference=patcher.in patcher >>>>> >>>>> >>>>> >>>>> ln -s cnxtconfig.in hsfconfig.in >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < hsfconfig.in > hsfconfig >>>>> >>>>> >>>>> >>>>> chmod --reference=hsfconfig.in hsfconfig >>>>> >>>>> >>>>> >>>>> ln -s cnxtstop.in hsfstop.in >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < hsfstop.in > hsfstop >>>>> >>>>> >>>>> >>>>> chmod --reference=hsfstop.in hsfstop >>>>> >>>>> >>>>> >>>>> ln -s cnxtmodconflicts.in hsfmodconflicts.in >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < hsfmodconflicts.in > hsfmodconflicts >>>>> >>>>> >>>>> >>>>> chmod --reference=hsfmodconflicts.in hsfmodconflicts >>>>> >>>>> >>>>> >>>>> ln -s cnxtdcpd.in hsfdcpd.in >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < hsfdcpd.in > hsfdcpd >>>>> >>>>> >>>>> >>>>> chmod --reference=hsfdcpd.in hsfdcpd >>>>> >>>>> >>>>> >>>>> install -m 700 hsfconfig hsfstop hsfmodconflicts hsfdcpd /usr/sbin >>>>> >>>>> >>>>> >>>>> ln -s rccnxt.in rchsf.in >>>>> >>>>> >>>>> >>>>> sed >>>>> >>>>> >>>>> >>>>> -e "s!@DATE@!`date "+%a, %d %b %Y %T %z"`!g" >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRIVER@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDRVDSC@!Conexant HSF softmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTTARGET@!hsf!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTARCH@!i386!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERDEV@!HSF!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMAXMDM@!8!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTETCDIR@!/etc/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLIBDIR@!/usr/lib/hsfmodem!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMAJOR@!240!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTCALOUTMAJOR@!241!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSERIALMINOR@!64!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDCPMAJOR@!242!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGMAJOR@!243!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTDIAGDMPMINOR@!255!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSCRMAJOR@!244!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTSBINDIR@!/usr/sbin!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTNVMDIR@!/etc/hsfmodem/nvm!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXVERSION@!7.80.02.06full!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUX_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXRPM_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTLINUXDEB_REL@!1!g' >>>>> >>>>> >>>>> >>>>> -e 's!@CNXTMODS@!hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via >>>>> >>>>> >>>>> >>>>> hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_codec_hsfmodem >>>>> >>>>> >>>>> >>>>> hsfhda hsfsoar hsfserial hsfengine hsfosspec!g' >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURL@!http://www.linuxant.com/drivers/hsf/full/archive/patches!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e >>>>> >>>>> >>>>> >>>>> >>>>> 's!@PATCHERURLUSER@!http://www.linuxant.com/drivers/hsf/downloads-patches.php!g' >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> -e "s!@BLAM_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@SCR_SUPPORT@!`test ! "" = yes; echo $?`!g" >>>>> >>>>> >>>>> >>>>> -e "s!@DMP_SUPPORT@!`test -z ""; echo $?`!g" >>>>> >>>>> >>>>> >>>>> < rchsf.in > rchsf >>>>> >>>>> >>>>> >>>>> chmod --reference=rchsf.in rchsf >>>>> >>>>> >>>>> >>>>> mkdir -m 755 -p /usr/lib/hsfmodem >>>>> >>>>> >>>>> >>>>> install -m 700 rchsf /usr/lib/hsfmodem >>>>> >>>>> >>>>> >>>>> make[1]: Leaving directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/scripts' >>>>> >>>>> >>>>> >>>>> make[1]: Entering directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>>> >>>>> >>>>> >>>>> rm -rf "/usr/lib/hsfmodem/config.mak" >>>>> >>>>> >>>>> >>>>> "/usr/lib/hsfmodem/modules/imported" "/usr/lib/hsfmodem/modules" >>>>> >>>>> >>>>> >>>>> mkdir -m 755 -p /usr/lib/hsfmodem/modules >>>>> >>>>> >>>>> >>>>> (cd .. && find config.mak modules/imported -depth -print | cpio -pdmu >>>>> >>>>> >>>>> >>>>> /usr/lib/hsfmodem) >>>>> >>>>> >>>>> >>>>> 5892 blocks >>>>> >>>>> >>>>> >>>>> find . ( -name COPYING -o -name '*.sh' -o -name '*.[ch]' -o -name >>>>> >>>>> >>>>> >>>>> '*.mak' -o -name '[Mm]akefile' ) -print | cpio -pdmu >>>>> >>>>> >>>>> >>>>> /usr/lib/hsfmodem/modules >>>>> >>>>> >>>>> >>>>> 3712 blocks >>>>> >>>>> >>>>> >>>>> find binaries -depth -print | cpio -pdmu /usr/lib/hsfmodem/modules >>>>> >>>>> >>>>> >>>>> 0 blocks >>>>> >>>>> >>>>> >>>>> make[1]: Leaving directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/modules' >>>>> >>>>> >>>>> >>>>> make[1]: Entering directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>>> >>>>> >>>>> >>>>> make[1]: Nothing to be done for `install'. >>>>> >>>>> >>>>> >>>>> make[1]: Leaving directory >>>>> >>>>> >>>>> >>>>> `/home/olivares/Downloads/hsfmodem-7.80.02.06full/diag' >>>>> >>>>> >>>>> >>>>> mkdir -p /etc/hsfmodem/log >>>>> >>>>> >>>>> >>>>> install -m 444 LICENSE /usr/lib/hsfmodem >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> To complete the installation and configuration of your modem, >>>>> >>>>> >>>>> >>>>> please run "hsfconfig" (or "/usr/sbin/hsfconfig") >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Might it be with Ubuntu? I used generic package with >>>>> >>>>> >>>>> >>>>> [olivares@acer-aspire-1 hsfmodem-7.80.02.06full]$ uname -a >>>>> >>>>> >>>>> >>>>> Linux acer-aspire-1 2.6.40-4.fc15.i686 #1 SMP Fri Jul 29 18:54:39 UTC >>>>> >>>>> >>>>> >>>>> 2011 i686 i686 i386 GNU/Linux >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Maybe Marv can test to find out what could be wrong? >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Regards, >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> Antonio >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Thu, Aug 25, 2011 at 8:02 PM, Antonio Olivares >>>>> >>>>> >>>>> >>>>> <olivares14031@xxxxxxxxx> wrote: >>>>> >>>>> >>>>> >>>> >>>>>> Jeffrey, >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> In the case you provided, you installed/tried to install the >>>> >>>>> >>>>> >>>>> >>>> >>>>>> alsa-linuxant package? >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> You may not have needed this package. >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> You do have kernel sources and compiler ready. However, the >>>> >>>>> >>>>> >>>>> >>>> >>>>>> replacements on the hsfmodem would differ with the ones suggested by >>>> >>>>> >>>>> >>>>> >>>> >>>>>> Jonathan(Linuxant support), DECLARE_MUTEX, with DEFINE_SEMAPHORE after >>>> >>>>> >>>>> >>>>> >>>> >>>>>> you have detected where it bombs out or wait a bit till they(Linuxant) >>>> >>>>> >>>>> >>>>> >>>> >>>>>> patch up the code and make it ready to work. >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> If someone has suggestions, please forward them to Jeffrey. >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> Regards, >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> Antonio >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> On Thu, Aug 25, 2011 at 5:15 PM, <cohanjeffrey@xxxxxxx> wrote: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Great to hear from you Antonio. I'm working only with the Sony 32-bit >>>>>>> VAIO >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> VGN-N130G and will attach ModemData.txt again. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 1) I did this BUT substituted /hsfmodem/ for /hcfpcimodem/ and wvdial >>>>>>> does >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> not find a modem: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> replace .ioctl with .compat_ioctl in: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 2) ERRORS: Both alsa-driver-linuxant and hfsmodem packages install >>>>>>> with >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> errors, even when I remove them and re-install. Here are excerpts: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> alsa-driver-linuxant_1.0.23.1_all.deb: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> ----in terminal: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Building modules for the 2.6.38-11-generic kernel, please wait... >>>>>>> done. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> ERROR: Build failed. Please review the build log at >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /tmp/alsa-driver-linuxant.26528.log >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> dpkg: error processing alsa-driver-linuxant (--install): >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> subprocess installed post-installation script returned error exit >>>>>>> status >>>>>>> 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> ----in log file: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> checking for GCC version... Kernel compiler: Used compiler: gcc >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> (Ubuntu/Linaro 4.5.2-8ubuntu4) 4.5.2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> *** NO PREDEFINED KERNEL COMPILER IS DETECTED >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> *** Assuming the same compiler is used with the current system >>>>>>> compiler. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> *** Please make sure that the same compiler version was used for >>>>>>> building >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> kernel. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> and later... >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c: In function >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> ‘snd_pcm_hw_params’: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:489:2: error: >>>>>>> implicit >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> declaration of function ‘pm_qos_remove_requirement’ >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /usr/lib/alsa-driver-linuxant/acore/pcm_native.c:492:3: error: >>>>>>> implicit >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> declaration of function ‘pm_qos_add_requirement’ >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[3]: *** [/usr/lib/alsa-driver-linuxant/acore/pcm_native.o] Error >>>>>>> 1 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[2]: *** [/usr/lib/alsa-driver-linuxant/acore] Error 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[1]: *** [_module_/usr/lib/alsa-driver-linuxant] Error 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make: *** [compile] Error 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> hsfmodem_7.80.02.06full_i386.deb: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /usr/lib/hsfmodem/modules/osservices.c:1396:1: warning: the frame >>>>>>> size >>>>>>> of >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 1028 bytes is larger than 1024 bytes >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> CC [M] /usr/lib/hsfmodem/modules/osstdio.o >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> CC [M] /usr/lib/hsfmodem/modules/osnvm.o >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> /usr/lib/hsfmodem/modules/osnvm.c:408:8: error: 'MUTEX' undeclared >>>>>>> here >>>>>>> (not >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> in a function) >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[2]: *** [/usr/lib/hsfmodem/modules/osnvm.o] Error 1 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[1]: *** [_module_/usr/lib/hsfmodem/modules] Error 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make[1]: Leaving directory `/usr/src/linux-headers-2.6.38-11-generic' >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> make: *** [all] Error 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> ----I have the long hsfdiag.txt file from "hsfconfig --dumpdiag" and >>>>>>> the >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> buildlog files >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 3) $ uname -a (Jonathan had asked someone for this) gets: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Linux whiskeybisquit-VGN-N130G 2.6.38-11-generic #48-Ubuntu SMP Fri >>>>>>> Jul >>>>>>> 29 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 19:05:14 UTC 2011 i68 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> 4) I had the modem working perfectly in Ubuntu 9.04, but don't >>>>>>> remember >>>>>>> how >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> I did it. Is it possible that it CAN'T be done in 11.04?! >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> I'm not sure if any of this will be of use to you, but am >>>>>>> particularly >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> interested in 4); and is it correct to substitute hsfmodem in 1)? Is >>>>>>> 2) >>>>>>> an >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> issue? Also would it have been important to reboot at certain points? >>>>>>> Should >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> I install a new modem in either beast? I so depend on dial-up! Many >>>>>>> thanks! >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Jeffrey >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> -----Original Message----- >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> From: Antonio Olivares <olivares14031@xxxxxxxxx> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> To: Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Cc: discuss@xxxxxxxxxxxxx >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Sent: Wed, Aug 24, 2011 7:17 pm >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Subject: Re: no dial-up: hsfmodem and alsa-driver-linuxant problem? >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Jeffrey, >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> In the x86_64 bit machine, if you had 32 bit linux installed, it >>>>>>> would >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> be a nice opportunity for you to check the modified driver *to see if >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> it would work*, but since it is 64 bit you get the message directly >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> from ModemData.txt >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> There is no agrsm software support for x86_64 systems, through the >>>>>>> modem >>>>>>> may >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> be >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> supported on Intel/i386 installations, which do more slowly servce >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> x86_64 processors. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> * driver >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/agrsm-11c11040_20110811_i386.deb >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> + new agrsm tools >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> For the other modem, Jonathan at Linuxant has posted ways to >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> circumvent the errors: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> http://linmodems.org/cgi-bin/ezmlm-cgi?1:sss:37710:201108:dpmgnpddbcjlkfmlpmin#b >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> <quote> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Hi, >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> this is a known build issue with recent kernels, even with the latest >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> release of the driver. A used provided the following workaround to >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> solve it: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> --- >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> replace DECLARE_MUTEX with DEFINE_SEMAPHORE in: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/osnvm.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/GPL/serial_cnxt.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> replace .ioctl with .compat_ioctl in: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> - /usr/lib/hcfpcimodem/modules/osdiag.c >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> --- >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> This build problem will be fixed in a future release of the driver. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Regards, >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Jonathan >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Technical specialist / Linuxant >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> www.linuxant.com >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> support@xxxxxxxxxxxx >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> </quote> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> So you may try the fixes suggested by Jonathan in the meantime. Or >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> you have the option to try the driver 11c11040 but on 32 bit linux. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Hopefully you can get one of these modems to work. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Regards, >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> Antonio >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> On Wed, Aug 24, 2011 at 8:56 PM, Jeffrey Cohan <cohanjeffrey@xxxxxxx> >>>>>>> wrote: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> I have spent many many hours trying to get dial-up working on two >>>>>>>> laptops >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> and would so appreciate your help. Dial-up on either one would be >>>>>>>> just >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> fine. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> I'm assuming it will be impossible on the HP laptop (64-bit) as I >>>>>>>> found >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> this: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> "Current support for the 11c11040 modem does NOT exist on a non-x86 >>>>>>>> system >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> (e.g. AMD, or x86_64.) This is because there is a proprietary core >>>>>>>> in >>>>>>>> the >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> code compiled for x86 systems." >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> On the VAIO (32-bit) it worked perfectly in an earlier version of >>>>>>>> Ubuntu >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> before upgrading. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> I can't seem to find an appropriate driver at www.linuxant.com for >>>>>>>> my >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Linux >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> version 2.6.38-11-generic. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Alsa-driver-linuxant doesn't seem to be properly installed. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> I get this error message: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> ERROR: Module build failed! >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Please examine the log file >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> "/etc/hsfmodem/log/buildlog-20110824182445.txt" >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> to determine why. >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> dpkg: error processing alsa-driver-linuxant (--configure): >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> subprocess installed post-installation script returned error exit >>>>>>>> status >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> 2 >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Errors were encountered while processing: >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> alsa-driver-linuxant >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> E: Sub-process /usr/bin/dpkg returned an error code (1) >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> =============== >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Thanks much! >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> Jeff >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>>> >>>> >>>>> >>>>> >>>>> >>>> >>>>>> >>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>> >>> >> >
