I have high-speed internet and only want to use the modem to fax.
When using efax to fax PDF file i get the following messages
efax-0.9a: 17:12:39 opened /dev/ttyS0
efax-0.9a: 17:12:45 sync: dropping DTR
efax-0.9a: 17:12:50 sync: sending escapes
efax-0.9a: 17:12:55 Error: sync: no response from modem
I am running:
dell dimension 4550
Intel P-4 2.53 GHz
1 gig ram
ubuntu 11.04
Kernel Linux 2.6.38-10-generic
GNOME 2.32.1
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.38-10-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for
dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
Internet Provider mail filters.
So in a day, also check the Archived responses at
http://www.linmodems.org
-------------------------- System information
----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.38-10-generic (buildd@vernadsky) (gcc version 4.5.2
(Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28 15:05:41 UTC
2011
scanModem update of: 2011_02_04
Distrib_ID=Ubuntu
DistribCodeName=natty
AptRepositoryStem=http://ca.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for
automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 05fd:3000 InterAct, Inc.
ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
ID 090c:a370 Feiya Technology Corp.
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
02:00.0 Communication controller: Conexant Systems, Inc. Device 10b4
(rev 89)
High Definition Audio cards can host modem chips.
For candidate card in slot 02:00.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
02:00.0 14f1:10b4 a0a0:010d Communication controller: Conexant Systems,
Inc. Device 10b4
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 02:00.0 ----
[ 0.161772] pci 0000:02:00.0: [14f1:10b4] type 0 class 0x000780
[ 0.161791] pci 0000:02:00.0: reg 10: [mem 0xfe1f0000-0xfe1fffff]
[ 0.161802] pci 0000:02:00.0: reg 14: [io 0xecf8-0xecff]
[ 0.161859] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.161865] pci 0000:02:00.0: PME# disabled
The PCI slot 02:00.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 02:00.0:
Modem chipset detected on
NAME="Communication controller: Conexant Systems, Inc. Device 10b4 "
CLASS=0780
PCIDEV=14f1:10b4
SUBSYS=a0a0:010d
IRQ=11
IDENT=hcfpcimodem
For candidate modem in: 02:00.0
0780 Communication controller: Conexant Systems, Inc. Device 10b4
Primary device ID: 14f1:10b4
Support type needed or chipset: hcfpcimodem
For owners of a Dell PCs with Conexant HSF modems, a driver source
package with full speed enabled is available, but requires driver
compiling. Read DOCs/Conexant.txt
The modem requires a hcflinmodem package.
Modem support packages from Linuxant include resources for compiling
drivers.
If an installer package matching your kernel_version is not provided,
just install a generic code package.
From http://www.linuxant.com/drivers/hcf/full/downloads-ubuntu-x86.php
download
hcfpcimodem-7.80.02.05full_k2.6.38_10_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hcfpcimodem*.zip
Then install with:
$ sudo dpkg -i hcfpcimodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above
procedures are not adequate.
02:00.0
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.5.2
and the compiler used in kernel assembly: 4.5.2
linux-headers-2.6.38-10-generic resources needed for compiling are not
manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.38-10-generic
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include.
The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273272 2011-02-04 00:43 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed
to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
wlan0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order
to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
CPU0
0: 50 IO-APIC-edge timer
1: 2 IO-APIC-edge i8042
6: 3 IO-APIC-edge floppy
7: 0 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
12: 4 IO-APIC-edge i8042
14: 6921 IO-APIC-edge ata_piix
15: 534 IO-APIC-edge ata_piix
16: 2948 IO-APIC-fasteoi uhci_hcd:usb2, nouveau
17: 33 IO-APIC-fasteoi 0000:02:0c.0
18: 655 IO-APIC-fasteoi uhci_hcd:usb4, EMU10K1X
19: 0 IO-APIC-fasteoi uhci_hcd:usb3
20: 186 IO-APIC-fasteoi eth0
23: 26 IO-APIC-fasteoi ehci_hcd:usb1
NMI: 0 Non-maskable interrupts
LOC: 16941 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
IWI: 0 IRQ work interrupts
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 0
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.38-10-generic (buildd@vernadsky) (gcc
version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4) ) #46-Ubuntu SMP Tue Jun 28
15:05:41 UTC 2011 (Ubuntu 2.6.38-10.46-generic 2.6.38.7)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff75000 (usable)
[ 0.000000] BIOS-e820: 000000003ff75000 - 000000003ff77000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 000000003ff77000 - 000000003ff98000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000003ff98000 - 0000000040000000
(reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000
(reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000
(reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] NX (Execute Disable) protection: approximated by x86
segment limits
[ 0.000000] DMI 2.3 present.
[ 0.000000] DMI: Dell Computer Corporation Dimension
4550 /0M0321, BIOS A05 01/27/2003
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[ 0.000000] last_pfn = 0x3ff75 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
0x7010600070106
[ 0.000000] found SMP MP-table at [c00fe710] fe710
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @
1bfb000-1c00000
[ 0.000000] RAMDISK: 36768000 - 373ac000
[ 0.000000] ACPI: RSDP 000feb90 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 000fd4f9 00038 (v01 DELL 4550 00000008
ASL 00000061)
[ 0.000000] ACPI: FACP 000fd531 00074 (v01 DELL 4550 00000008
ASL 00000061)
[ 0.000000] ACPI: DSDT fffce938 022EA (v01 DELL dt_ex 00001000
MSFT 0100000D)
[ 0.000000] ACPI: FACS 3ff75000 00040
[ 0.000000] ACPI: SSDT fffd0d5f 000BA (v01 DELL st_ex 00001000
MSFT 0100000D)
[ 0.000000] ACPI: APIC 000fd5a5 0006C (v01 DELL 4550 00000008
ASL 00000061)
[ 0.000000] ACPI: BOOT 000fd611 00028 (v01 DELL 4550 00000008
ASL 00000061)
[ 0.000000] ACPI: ASF! 000fd639 00067 (v16 DELL 4550 00000008
ASL 00000061)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ff75
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x000000a0
[ 0.000000] 0: 0x00000100 -> 0x0003ff75
[ 0.000000] On node 0 totalpages: 261893
[ 0.000000] free_area_init_node: node 0, pgdat c1784140, node_mem_map
f5f68200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 271 pages used for memmap
[ 0.000000] HighMem zone: 34408 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
40000000:bec00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5800000 s28800 r0 d24448
u1048576
[ 0.000000] pcpu-alloc: s28800 r0 d24448 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259846
[ 0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.38-10-generic
root=UUID=b01cc50d-fbe2-4537-bea9-1acf9852aa97 ro quiet splash
vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5239780 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't
want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ff75)
[ 0.000000] Memory: 1011296k/1048020k available (5190k kernel code,
36276k reserved, 2539k data, 700k init, 138716k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc178d000 - 0xc183c000 ( 700 kB)
[ 0.000000] .data : 0xc1511841 - 0xc178c4c0 (2539 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1511841 (5190 kB)
[ 0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0,
CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4c08000 soft=f4c0a000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2524.885 MHz processor.
[ 0.008006] Calibrating delay loop (skipped), value calculated using
timer frequency.. 5049.77 BogoMIPS (lpj=10099540)
[ 0.008015] pid_max: default: 32768 minimum: 301
[ 0.008055] Security Framework initialized
[ 0.008086] AppArmor: AppArmor initialized
[ 0.008090] Yama: becoming mindful.
[ 0.008189] Mount-cache hash table entries: 512
[ 0.008450] Initializing cgroup subsys ns
[ 0.008457] ns_cgroup deprecated: consider using the 'clone_children'
flag without the ns_cgroup.
[ 0.008463] Initializing cgroup subsys cpuacct
[ 0.008471] Initializing cgroup subsys memory
[ 0.008487] Initializing cgroup subsys devices
[ 0.008492] Initializing cgroup subsys freezer
[ 0.008496] Initializing cgroup subsys net_cls
[ 0.008500] Initializing cgroup subsys blkio
[ 0.008565] CPU0: Hyper-Threading is disabled
[ 0.008570] mce: CPU supports 4 MCE banks
[ 0.008586] CPU0: Thermal monitoring enabled (TM1)
[ 0.009419] SMP alternatives: switching to UP code
[ 0.022989] ACPI: Core revision 20110112
[ 0.047320] ftrace: allocating 23648 entries in 47 pages
[ 0.048131] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048431] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090179] CPU0: Intel(R) Pentium(R) 4 CPU 2.53GHz stepping 07
[ 0.092004] Performance Events: Netburst events, Netburst P4/Xeon PMU
driver.
[ 0.092004] ... version: 0
[ 0.092004] ... bit width: 40
[ 0.092004] ... generic registers: 18
[ 0.092004] ... value mask: 000000ffffffffff
[ 0.092004] ... max period: 0000007fffffffff
[ 0.092004] ... fixed-purpose events: 0
[ 0.092004] ... event mask: 000000000003ffff
[ 0.092004] Brought up 1 CPUs
[ 0.092004] Total of 1 processors activated (5049.77 BogoMIPS).
[ 0.092004] devtmpfs: initialized
[ 0.092004] print_constraints: dummy:
[ 0.092004] Time: 22:49:00 Date: 07/18/11
[ 0.092004] NET: Registered protocol family 16
[ 0.092004] EISA bus registered
[ 0.092004] ACPI: bus type pci registered
[ 0.117758] PCI: PCI BIOS revision 2.10 entry at 0xfbe70, last bus=2
[ 0.117761] PCI: Using configuration type 1 for base access
[ 0.119496] bio: create slab <bio-0> at 0
[ 0.120297] ACPI: EC: Look up EC in DSDT
[ 0.137229] ACPI: Interpreter enabled
[ 0.137241] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.137280] ACPI: Using IOAPIC for interrupt routing
[ 0.160516] ACPI: No dock devices found.
[ 0.160520] HEST: Table not found.
[ 0.160527] PCI: Ignoring host bridge windows from ACPI; if
necessary, use "pci=use_crs" and report a bug
[ 0.160557] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.160630] pci_root PNP0A03:00: host bridge window [io
0x0000-0x0cf7] (ignored)
[ 0.160635] pci_root PNP0A03:00: host bridge window [io
0x0d00-0xffff] (ignored)
[ 0.160639] pci_root PNP0A03:00: host bridge window [mem
0x000a0000-0x000bffff] (ignored)
[ 0.160644] pci_root PNP0A03:00: host bridge window [mem
0x000c8000-0x000dffff] (ignored)
[ 0.160648] pci_root PNP0A03:00: host bridge window [mem
0xc0000000-0xfebfffff] (ignored)
[ 0.160652] pci_root PNP0A03:00: host bridge window [mem
0xfef00000-0xffafffff] (ignored)
[ 0.160673] pci 0000:00:00.0: [8086:2560] type 0 class 0x000600
[ 0.160685] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff
pref]
[ 0.160755] pci 0000:00:01.0: [8086:2561] type 1 class 0x000604
[ 0.160830] pci 0000:00:1d.0: [8086:24c2] type 0 class 0x000c03
[ 0.160880] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f]
[ 0.160919] pci 0000:00:1d.1: [8086:24c4] type 0 class 0x000c03
[ 0.160968] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f]
[ 0.161007] pci 0000:00:1d.2: [8086:24c7] type 0 class 0x000c03
[ 0.161056] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f]
[ 0.161106] pci 0000:00:1d.7: [8086:24cd] type 0 class 0x000c03
[ 0.161131] pci 0000:00:1d.7: reg 10: [mem 0xfe300000-0xfe3003ff]
[ 0.161217] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.161224] pci 0000:00:1d.7: PME# disabled
[ 0.161244] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.161293] pci 0000:00:1f.0: [8086:24c0] type 0 class 0x000601
[ 0.161298] * The chipset may have PM-Timer Bug. Due to workarounds
for a bug,
[ 0.161301] * this clock source is slow. If you are sure your timer
does not have
[ 0.161303] * this bug, please use "acpi_pm_good" to disable the
workaround
[ 0.161390] pci 0000:00:1f.1: [8086:24cb] type 0 class 0x000101
[ 0.161407] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.161419] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.161431] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.161442] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.161454] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf]
[ 0.161466] pci 0000:00:1f.1: reg 24: [mem 0x00000000-0x000003ff]
[ 0.161499] pci 0000:00:1f.3: [8086:24c3] type 0 class 0x000c05
[ 0.161548] pci 0000:00:1f.3: reg 20: [io 0xdc80-0xdc9f]
[ 0.161604] pci 0000:01:00.0: [10de:0172] type 0 class 0x000300
[ 0.161622] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfcffffff]
[ 0.161632] pci 0000:01:00.0: reg 14: [mem 0xf4000000-0xf7ffffff
pref]
[ 0.161642] pci 0000:01:00.0: reg 18: [mem 0xf3f80000-0xf3ffffff
pref]
[ 0.161669] pci 0000:01:00.0: reg 30: [mem 0x80000000-0x8001ffff
pref]
[ 0.161726] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.161732] pci 0000:00:01.0: bridge window [io 0xf000-0x0000]
(disabled)
[ 0.161738] pci 0000:00:01.0: bridge window [mem
0xfc000000-0xfdffffff]
[ 0.161744] pci 0000:00:01.0: bridge window [mem
0xf0000000-0xf7ffffff pref]
[ 0.161772] pci 0000:02:00.0: [14f1:10b4] type 0 class 0x000780
[ 0.161791] pci 0000:02:00.0: reg 10: [mem 0xfe1f0000-0xfe1fffff]
[ 0.161802] pci 0000:02:00.0: reg 14: [io 0xecf8-0xecff]
[ 0.161859] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.161865] pci 0000:02:00.0: PME# disabled
[ 0.161886] pci 0000:02:02.0: [1102:0006] type 0 class 0x000401
[ 0.161905] pci 0000:02:02.0: reg 10: [io 0xecc0-0xecdf]
[ 0.161970] pci 0000:02:02.0: supports D1 D2
[ 0.161995] pci 0000:02:02.1: [1102:7004] type 0 class 0x000980
[ 0.162012] pci 0000:02:02.1: reg 10: [io 0xecf0-0xecf7]
[ 0.162078] pci 0000:02:02.1: supports D1 D2
[ 0.162111] pci 0000:02:08.0: [8086:1039] type 0 class 0x000200
[ 0.162130] pci 0000:02:08.0: reg 10: [mem 0xfe1ef000-0xfe1effff]
[ 0.162141] pci 0000:02:08.0: reg 14: [io 0xec80-0xecbf]
[ 0.162198] pci 0000:02:08.0: supports D1 D2
[ 0.162201] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.162207] pci 0000:02:08.0: PME# disabled
[ 0.162231] pci 0000:02:0c.0: [1814:0301] type 0 class 0x000280
[ 0.162250] pci 0000:02:0c.0: reg 10: [mem 0xfe1e0000-0xfe1e7fff]
[ 0.162347] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive
decode)
[ 0.162353] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.162360] pci 0000:00:1e.0: bridge window [mem
0xfe100000-0xfe2fffff]
[ 0.162366] pci 0000:00:1e.0: bridge window [mem
0xfff00000-0x000fffff pref] (disabled)
[ 0.162371] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff]
(subtractive decode)
[ 0.162375] pci 0000:00:1e.0: bridge window [mem
0x00000000-0xffffffff] (subtractive decode)
[ 0.162390] pci_bus 0000:00: on NUMA node 0
[ 0.162395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.162771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.188347] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11
12 15)
[ 0.188690] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11
12 15)
[ 0.189028] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11
12 15)
[ 0.189367] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11
12 15)
[ 0.189704] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11
12 15)
[ 0.190042] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11
12 15)
[ 0.190377] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11
12 15) *0, disabled.
[ 0.190716] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11
12 15)
[ 0.190951] vgaarb: device added: PCI:0000:01:00.0,decodes=io
+mem,owns=io+mem,locks=none
[ 0.190959] vgaarb: loaded
[ 0.191336] SCSI subsystem initialized
[ 0.191439] libata version 3.00 loaded.
[ 0.191527] usbcore: registered new interface driver usbfs
[ 0.191547] usbcore: registered new interface driver hub
[ 0.191588] usbcore: registered new device driver usb
[ 0.191769] wmi: Mapper loaded
[ 0.191772] PCI: Using ACPI for IRQ routing
[ 0.191778] PCI: pci_cache_line_size set to 64 bytes
[ 0.191854] reserve RAM buffer: 000000003ff75000 - 000000003fffffff
[ 0.192038] NetLabel: Initializing
[ 0.192042] NetLabel: domain hash size = 128
[ 0.192045] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.192061] NetLabel: unlabeled traffic allowed by default
[ 0.203282] AppArmor: AppArmor Filesystem Enabled
[ 0.203342] pnp: PnP ACPI init
[ 0.203375] ACPI: bus type pnp registered
[ 0.206862] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.206866] pnp 00:00: [mem 0x00100000-0x00ffffff]
[ 0.206870] pnp 00:00: [mem 0x01000000-0x3ff74fff]
[ 0.206874] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.206877] pnp 00:00: [mem 0xfec00000-0xfec0ffff]
[ 0.206881] pnp 00:00: [mem 0xfee00000-0xfee0ffff]
[ 0.206885] pnp 00:00: [mem 0xffb00000-0xffbfffff]
[ 0.206888] pnp 00:00: [mem 0xffc00000-0xffffffff]
[ 0.206972] system 00:00: [mem 0x00000000-0x0009ffff] could not be
reserved
[ 0.206978] system 00:00: [mem 0x00100000-0x00ffffff] could not be
reserved
[ 0.206982] system 00:00: [mem 0x01000000-0x3ff74fff] could not be
reserved
[ 0.206987] system 00:00: [mem 0x000f0000-0x000fffff] could not be
reserved
[ 0.206991] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be
reserved
[ 0.206996] system 00:00: [mem 0xfee00000-0xfee0ffff] has been
reserved
[ 0.207000] system 00:00: [mem 0xffb00000-0xffbfffff] has been
reserved
[ 0.207005] system 00:00: [mem 0xffc00000-0xffffffff] has been
reserved
[ 0.207012] system 00:00: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.207041] pnp 00:01: [bus 00-ff]
[ 0.207045] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.207049] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.207052] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.207056] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.207060] pnp 00:01: [mem 0x000c8000-0x000dffff window]
[ 0.207064] pnp 00:01: [mem 0xc0000000-0xfebfffff window]
[ 0.207068] pnp 00:01: [mem 0xfef00000-0xffafffff window]
[ 0.207122] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03
(active)
[ 0.209590] pnp 00:02: [io 0x0080-0x009f]
[ 0.209594] pnp 00:02: [io 0x0000-0x001f]
[ 0.209597] pnp 00:02: [io 0x00c0-0x00df]
[ 0.209601] pnp 00:02: [dma 4]
[ 0.209642] pnp 00:02: Plug and Play ACPI device, IDs PNP0200
(active)
[ 0.209741] pnp 00:03: [io 0x00f0-0x00ff]
[ 0.209761] pnp 00:03: [irq 13]
[ 0.209806] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04
(active)
[ 0.209903] pnp 00:04: [io 0x0061]
[ 0.209942] pnp 00:04: Plug and Play ACPI device, IDs PNP0800
(active)
[ 0.210045] pnp 00:05: [io 0x0070-0x007f]
[ 0.210053] pnp 00:05: [irq 8]
[ 0.210098] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00
(active)
[ 0.213038] pnp 00:06: [io 0x03f0-0x03f5]
[ 0.213043] pnp 00:06: [io 0x03f7]
[ 0.213051] pnp 00:06: [irq 6]
[ 0.213055] pnp 00:06: [dma 2]
[ 0.213311] pnp 00:06: Plug and Play ACPI device, IDs PNP0700
(active)
[ 0.217884] pnp 00:07: [io 0x03f8-0x03ff]
[ 0.217892] pnp 00:07: [irq 4]
[ 0.218104] pnp 00:07: Plug and Play ACPI device, IDs PNP0501
(active)
[ 0.221438] pnp 00:08: [io 0x0378-0x037f]
[ 0.221442] pnp 00:08: [io 0x0778-0x077f]
[ 0.221449] pnp 00:08: [irq 7]
[ 0.221452] pnp 00:08: [dma 0 disabled]
[ 0.221980] pnp 00:08: Plug and Play ACPI device, IDs PNP0401
(active)
[ 0.223655] pnp 00:09: [io 0x0060]
[ 0.223659] pnp 00:09: [io 0x0064]
[ 0.223663] pnp 00:09: [io 0x0062-0x0063]
[ 0.223670] pnp 00:09: [io 0x0065-0x006f]
[ 0.223673] pnp 00:09: [io 0x00e0-0x00ef]
[ 0.223677] pnp 00:09: [io 0x0800-0x085f]
[ 0.223680] pnp 00:09: [io 0x0c00-0x0c7f]
[ 0.223683] pnp 00:09: [io 0x0860-0x08ff]
[ 0.223752] system 00:09: [io 0x0800-0x085f] has been reserved
[ 0.223757] system 00:09: [io 0x0c00-0x0c7f] has been reserved
[ 0.223761] system 00:09: [io 0x0860-0x08ff] has been reserved
[ 0.223767] system 00:09: Plug and Play ACPI device, IDs PNP0c01
(active)
[ 0.224507] pnp: PnP ACPI: found 10 devices
[ 0.224511] ACPI: ACPI bus type pnp unregistered
[ 0.224517] PnPBIOS: Disabled by ACPI PNP
[ 0.261996] Switching to clocksource acpi_pm
[ 0.262028] pci 0000:01:00.0: no compatible bridge window for [mem
0x80000000-0x8001ffff pref]
[ 0.262061] pci 0000:00:1f.1: BAR 5: assigned [mem
0x40000000-0x400003ff]
[ 0.262070] pci 0000:00:1f.1: BAR 5: set to [mem
0x40000000-0x400003ff] (PCI address [0x40000000-0x400003ff])
[ 0.262076] pci 0000:01:00.0: BAR 6: assigned [mem
0xf0000000-0xf001ffff pref]
[ 0.262081] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.262085] pci 0000:00:01.0: bridge window [io disabled]
[ 0.262092] pci 0000:00:01.0: bridge window [mem
0xfc000000-0xfdffffff]
[ 0.262098] pci 0000:00:01.0: bridge window [mem
0xf0000000-0xf7ffffff pref]
[ 0.262107] pci 0000:00:1e.0: PCI bridge to [bus 02-02]
[ 0.262112] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
[ 0.262119] pci 0000:00:1e.0: bridge window [mem
0xfe100000-0xfe2fffff]
[ 0.262125] pci 0000:00:1e.0: bridge window [mem pref disabled]
[ 0.262147] pci 0000:00:1e.0: setting latency timer to 64
[ 0.262153] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.262157] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.262162] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfdffffff]
[ 0.262166] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff
pref]
[ 0.262170] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.262174] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe2fffff]
[ 0.262178] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.262182] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.262246] NET: Registered protocol family 2
[ 0.262350] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.262789] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.263947] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.263947] Switched to NOHz mode on CPU #0
[ 0.263947] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.263947] TCP reno registered
[ 0.263947] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.263947] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.263947] NET: Registered protocol family 1
[ 0.263947] pci 0000:01:00.0: Boot video device
[ 0.263947] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
disabling
[ 0.263947] PCI: CLS 64 bytes, default 64
[ 0.263947] Simple Boot Flag value 0x87 read from CMOS RAM was
invalid
[ 0.263947] Simple Boot Flag at 0x7a set to 0x1
[ 0.263947] cpufreq-nforce2: No nForce2 chipset.
[ 0.263961] audit: initializing netlink socket (disabled)
[ 0.263980] type=2000 audit(1311029339.260:1): initialized
[ 0.274830] Trying to unpack rootfs image as initramfs...
[ 0.292400] highmem bounce pool size: 64 pages
[ 0.292412] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.300524] VFS: Disk quotas dquot_6.5.2
[ 0.300629] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 0.301735] fuse init (API version 7.16)
[ 0.301888] msgmni has been set to 1704
[ 0.308740] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[ 0.308793] io scheduler noop registered
[ 0.308796] io scheduler deadline registered
[ 0.308824] io scheduler cfq registered (default)
[ 0.309041] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.309086] pciehp: PCI Express Hot Plug Controller Driver version:
0.4
[ 0.309327] input: Power Button
as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 0.309341] ACPI: Power Button [VBTN]
[ 0.309421] input: Power Button
as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.309428] ACPI: Power Button [PWRF]
[ 0.309599] ACPI: acpi_idle registered with cpuidle
[ 0.336169] ERST: Table is not found!
[ 0.336324] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.356697] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.356776] isapnp: Scanning for PnP cards...
[ 0.446233] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.512641] Linux agpgart interface v0.103
[ 0.512772] agpgart-intel 0000:00:00.0: Intel 845G Chipset
[ 0.524260] agpgart-intel 0000:00:00.0: AGP aperture is 128M @
0xe8000000
[ 0.526161] brd: module loaded
[ 0.527069] loop: module loaded
[ 0.527244] i2c-core: driver [adp5520] using legacy suspend method
[ 0.527248] i2c-core: driver [adp5520] using legacy resume method
[ 0.527435] ata_piix 0000:00:1f.1: version 2.13
[ 0.527451] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.527479] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 0.527553] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.532267] scsi0 : ata_piix
[ 0.532508] scsi1 : ata_piix
[ 0.532575] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0
irq 14
[ 0.532580] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8
irq 15
[ 0.533273] Fixed MDIO Bus: probed
[ 0.533347] PPP generic driver version 2.4.2
[ 0.533471] tun: Universal TUN/TAP device driver, 1.6
[ 0.533474] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.533619] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
Driver
[ 0.533668] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low)
-> IRQ 23
[ 0.533694] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.533700] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.533774] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 1
[ 0.533823] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.537700] ehci_hcd 0000:00:1d.7: cache line size of 64 is not
supported
[ 0.544084] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe300000
[ 0.556475] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.556757] hub 1-0:1.0: USB hub found
[ 0.556765] hub 1-0:1.0: 6 ports detected
[ 0.556904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.556931] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.557031] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[ 0.557045] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.557050] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.557129] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 2
[ 0.557175] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
[ 0.557365] hub 2-0:1.0: USB hub found
[ 0.557373] hub 2-0:1.0: 2 ports detected
[ 0.557473] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low)
-> IRQ 19
[ 0.557483] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.557487] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.557557] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 3
[ 0.557598] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60
[ 0.557791] hub 3-0:1.0: USB hub found
[ 0.557798] hub 3-0:1.0: 2 ports detected
[ 0.557883] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low)
-> IRQ 18
[ 0.557892] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.557896] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.557971] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 4
[ 0.558008] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 0.558187] hub 4-0:1.0: USB hub found
[ 0.558194] hub 4-0:1.0: 2 ports detected
[ 0.558372] i8042: PNP: No PS/2 controller found. Probing ports
directly.
[ 0.565149] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.565170] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.565455] mousedev: PS/2 mouse device common for all mice
[ 0.565704] rtc_cmos 00:05: RTC can wake from S4
[ 0.565783] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.565811] rtc0: alarms up to one day, 242 bytes nvram
[ 0.565972] device-mapper: uevent: version 1.0.3
[ 0.566095] device-mapper: ioctl: 4.19.1-ioctl (2011-01-07)
initialised: dm-devel@xxxxxxxxxx
[ 0.572349] device-mapper: multipath: version 1.2.0 loaded
[ 0.572357] device-mapper: multipath round-robin: version 1.0.0
loaded
[ 0.572565] EISA: Probing bus 0 at eisa.0
[ 0.572605] EISA: Detected 0 cards.
[ 0.616306] cpuidle: using governor ladder
[ 0.616309] cpuidle: using governor menu
[ 0.616723] TCP cubic registered
[ 0.616926] NET: Registered protocol family 10
[ 0.617751] NET: Registered protocol family 17
[ 0.617787] Registering the dns_resolver key type
[ 0.617849] Using IPI No-Shortcut mode
[ 0.618048] PM: Hibernation image not present or could not be loaded.
[ 0.618065] registered taskstats version 1
[ 0.618299] Magic number: 3:481:856
[ 0.618413] rtc_cmos 00:05: setting system clock to 2011-07-18
22:49:00 UTC (1311029340)
[ 0.618418] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.618421] EDD information not available.
[ 0.720548] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL13, max
UDMA/33
[ 0.720558] ata2.01: ATAPI: HL-DT-ST GCE-8320B, 1.01, max MWDMA2
[ 0.733508] ata1.00: HPA detected: current 117187500, native
117231408
[ 0.733517] ata1.00: ATA-5: WDC WD600BB-75CAA0, 16.06V16, max
UDMA/100
[ 0.733522] ata1.00: 117187500 sectors, multi 8: LBA
[ 0.734096] ata1.01: ATA-7: Maxtor 6Y060L0, YAR41VW0, max UDMA/133
[ 0.734101] ata1.01: 120103200 sectors, multi 8: LBA
[ 0.736219] ata2.00: configured for UDMA/33
[ 0.784417] ata2.01: configured for MWDMA2
[ 0.785462] ata1.00: configured for UDMA/100
[ 0.876058] ata1.01: configured for UDMA/100
[ 0.923893] isapnp: No Plug & Play device found
[ 0.924379] scsi 0:0:0:0: Direct-Access ATA WDC WD600BB-75CA
16.0 PQ: 0 ANSI: 5
[ 0.924677] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 0.924859] scsi 0:0:1:0: Direct-Access ATA Maxtor 6Y060L0
YAR4 PQ: 0 ANSI: 5
[ 0.925059] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 0.925167] sd 0:0:0:0: [sda] 117187500 512-byte logical blocks:
(60.0 GB/55.8 GiB)
[ 0.925251] sd 0:0:0:0: [sda] Write Protect is off
[ 0.925256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925292] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 0.965407] sda: sda1 sda2 < sda5 >
[ 0.965598] sda: p5 size 4876288 extends beyond EOD, enabling native
capacity
[ 0.965689] ata1: soft resetting link
[ 0.969253] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B
DL13 PQ: 0 ANSI: 5
[ 0.977409] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 0.977417] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.977655] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 0.977789] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 0.978689] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8320B
1.01 PQ: 0 ANSI: 5
[ 0.982397] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda
tray
[ 0.982627] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 0.982756] sr 1:0:1:0: Attached scsi generic sg3 type 5
[ 0.984072] usb 1-3: new high speed USB device using ehci_hcd and
address 3
[ 1.143069] Freeing initrd memory: 12560k freed
[ 1.164227] ata1.00: n_sectors mismatch 117187500 != 117231408
[ 1.164233] ata1.00: new n_sectors matches native, probably late HPA
unlock, n_sectors updated
[ 1.181354] ata1.00: configured for UDMA/100
[ 1.196341] ata1.01: configured for UDMA/100
[ 1.196355] ata1: EH complete
[ 1.196514] sd 0:0:1:0: [sdb] 120103200 512-byte logical blocks:
(61.4 GB/57.2 GiB)
[ 1.196556] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks:
(60.0 GB/55.8 GiB)
[ 1.196668] sd 0:0:1:0: [sdb] Write Protect is off
[ 1.196673] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.196749] sd 0:0:1:0: [sdb] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 1.205569] sda: detected capacity change from 60000000000 to
60022480896
[ 1.205813] sdb: sdb1
[ 1.265245] sda: sda1 sda2 < sda5 >
[ 1.265692] sdb: detected capacity change from 0 to 61492838400
[ 1.265844] sda: detected capacity change from 0 to 60022480896
[ 1.265988] sdb: detected capacity change from 0 to 61492838400
[ 1.266142] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 1.266246] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.266289] Freeing unused kernel memory: 700k freed
[ 1.267180] Write protecting the kernel text: 5192k
[ 1.267219] Write protecting the kernel read-only data: 2148k
[ 1.272088] Refined TSC clocksource calibration: 2524.921 MHz.
[ 1.272099] Switching to clocksource tsc
[ 1.308909] <30>udev[65]: starting version 167
[ 1.420080] usb 2-1: new low speed USB device using uhci_hcd and
address 2
[ 1.625597] Floppy drive(s): fd0 is 1.44M
[ 1.642362] FDC 0 is a post-1991 82077
[ 1.685559] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.685565] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.685636] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) ->
IRQ 20
[ 1.788043] e100 0000:02:08.0: PME# disabled
[ 1.788986] e100 0000:02:08.0: eth0: addr 0xfe1ef000, irq 20, MAC
addr 00:07:e9:90:17:29
[ 1.798101] usbcore: registered new interface driver usbhid
[ 1.798106] usbhid: USB HID core driver
[ 1.822042] input: Microsft Microsoft Wireless Desktop Receiver 3.1
as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input2
[ 1.822457] microsoft 0003:045E:00F9.0001: input,hidraw0: USB HID
v1.11 Keyboard [Microsft Microsoft Wireless Desktop Receiver 3.1] on
usb-0000:00:1d.0-1/input0
[ 1.852033] usb 4-2: new low speed USB device using uhci_hcd and
address 2
[ 1.911014] microsoft 0003:045E:00F9.0002: fixing up Microsoft
Wireless Receiver Model 1028 report descriptor
[ 1.965028] input: Microsft Microsoft Wireless Desktop Receiver 3.1
as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input3
[ 1.965492] microsoft 0003:045E:00F9.0002: input,hidraw1: USB HID
v1.11 Mouse [Microsft Microsoft Wireless Desktop Receiver 3.1] on
usb-0000:00:1d.0-1/input1
[ 1.996213] EXT4-fs (sda1): mounted filesystem with ordered data
mode. Opts: (null)
[ 2.054102] input: S.T.D. Interact Gaming Device
as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input4
[ 2.054254] generic-usb 0003:05FD:3000.0003: input,hidraw2: USB HID
v1.00 Joystick [S.T.D. Interact Gaming Device] on
usb-0000:00:1d.2-2/input0
[ 19.600231] Adding 2438140k swap on /dev/sda5. Priority:-1 extents:1
across:2438140k
[ 19.640765] <30>udev[264]: starting version 167
[ 19.704443] lp: driver loaded but no devices found
[ 19.866260] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 19.963909] intel_rng: Firmware space is locked read-only. If you
can't or
[ 19.963913] intel_rng: don't want to disable this in firmware setup,
and if
[ 19.963915] intel_rng: you are certain that your system has a
functional
[ 19.963917] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 20.242007] type=1400 audit(1311029360.120:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient" pid=448
comm="apparmor_parser"
[ 20.253510] type=1400 audit(1311029360.132:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=448
comm="apparmor_parser"
[ 20.254090] type=1400 audit(1311029360.132:4): apparmor="STATUS"
operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script"
pid=448 comm="apparmor_parser"
[ 20.491690] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 20.873176] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.876164] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full
Duplex
[ 20.876411] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 21.011125] parport_pc 00:08: reported by Plug and Play ACPI
[ 21.011180] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 21.041773] gameport gameport0: EMU10K1 is pci0000:02:02.1/gameport0,
io 0xecf0, speed 1147kHz
[ 21.127782] lp0: using parport0 (interrupt-driven).
[ 21.393573] Linux video capture interface: v2.00
[ 21.744940] cfg80211: Calling CRDA to update world regulatory domain
[ 21.851425] type=1400 audit(1311029361.728:5): apparmor="STATUS"
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
pid=630 comm="apparmor_parser"
[ 21.869620] type=1400 audit(1311029361.748:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient" pid=633
comm="apparmor_parser"
[ 21.870537] type=1400 audit(1311029361.748:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=633
comm="apparmor_parser"
[ 21.871139] type=1400 audit(1311029361.748:8): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=633
comm="apparmor_parser"
[ 21.908559] type=1400 audit(1311029361.788:9): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince" pid=635
comm="apparmor_parser"
[ 21.956178] type=1400 audit(1311029361.836:10): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince-previewer" pid=635
comm="apparmor_parser"
[ 21.959095] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 21.994265] type=1400 audit(1311029361.872:11): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=635
comm="apparmor_parser"
[ 22.191599] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam
(090c:a370)
[ 22.202724] input: USB 2.0 PC Cam
as /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0/input/input5
[ 22.202941] usbcore: registered new interface driver uvcvideo
[ 22.202946] USB Video Class driver (v1.0.0)
[ 23.055312] cfg80211: World regulatory domain updated:
[ 23.055318] cfg80211: (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[ 23.055323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 23.055327] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 23.055332] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz),
(300 mBi, 2000 mBm)
[ 23.055336] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 23.055340] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz),
(300 mBi, 2000 mBm)
[ 23.116115] ppdev: user-space parallel port driver
[ 23.449807] [drm] Initialized drm 1.1.0 20060810
[ 23.765516] rt61pci 0000:02:0c.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 23.782588] cfg80211: Updating information on frequency 2412 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782595] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782599] cfg80211: Updating information on frequency 2417 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782604] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782608] cfg80211: Updating information on frequency 2422 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782612] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782616] cfg80211: Updating information on frequency 2427 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782621] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782624] cfg80211: Updating information on frequency 2432 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782629] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782632] cfg80211: Updating information on frequency 2437 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782637] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782640] cfg80211: Updating information on frequency 2442 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782645] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782648] cfg80211: Updating information on frequency 2447 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782653] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782657] cfg80211: Updating information on frequency 2452 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782661] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782665] cfg80211: Updating information on frequency 2457 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782669] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782673] cfg80211: Updating information on frequency 2462 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782678] cfg80211: 2402000 KHz - 2472000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782681] cfg80211: Updating information on frequency 2467 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782686] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782690] cfg80211: Updating information on frequency 2472 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782694] cfg80211: 2457000 KHz - 2482000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.782698] cfg80211: Updating information on frequency 2484 MHz for
a 20 MHz width channel with regulatory rule:
[ 23.782702] cfg80211: 2474000 KHz - 2494000 KHz @ KHz), (300 mBi,
2000 mBm)
[ 23.815568] ieee80211 phy0: Selected rate control algorithm
'minstrel_ht'
[ 23.817831] Registered led device: rt61pci-phy0::radio
[ 23.817946] Registered led device: rt61pci-phy0::assoc
[ 23.982478] EMU10K1X 0000:02:02.0: PCI INT A -> GSI 18 (level, low)
-> IRQ 18
[ 23.982517] Model 1003 Rev 00000000 Serial 10031102
[ 23.990410] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 24.013923] [drm] nouveau 0000:01:00.0: Detected an NV10 generation
card (0x017200a3)
[ 24.014176] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from PRAMIN
[ 24.060959] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 24.061140] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 24.061144] [drm] nouveau 0000:01:00.0: BMP version 5.21
[ 24.061147] [drm] nouveau 0000:01:00.0: Bios version 04.17.00.45
[ 24.061152] [drm] nouveau 0000:01:00.0: Found Display Configuration
Block version 2.0
[ 24.061157] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000100
000088b8
[ 24.061161] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02010111
00000003
[ 24.061165] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02010211
00000003
[ 24.061169] [drm] nouveau 0000:01:00.0: Merging DCB entries 1 and 2
[ 24.061317] [drm] nouveau 0000:01:00.0: Loading NV17 power sequencing
microcode
[ 24.061323] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at
offset 0xCA44
[ 24.061359] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
offset 0xCD7C
[ 24.068095] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at
offset 0xCB44
[ 24.093809] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at
offset 0xD27E
[ 24.093823] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at
offset 0xCCD8
[ 24.147410] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.653475] [drm] nouveau 0000:01:00.0: 1 available performance
level(s)
[ 24.653482] [drm] nouveau 0000:01:00.0: 0: memory 332MHz
[ 24.653493] [drm] nouveau 0000:01:00.0: c: memory 333MHz core 249MHz
[ 24.655661] [TTM] Zone kernel: Available graphics memory: 442920
kiB.
[ 24.655666] [TTM] Zone highmem: Available graphics memory: 512278
kiB.
[ 24.655670] [TTM] Initializing pool allocator.
[ 24.655693] [drm] nouveau 0000:01:00.0: Detected 64MiB VRAM
[ 24.655984] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 24.656689] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x
mode
[ 24.656726] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 24.656758] [drm] nouveau 0000:01:00.0: 128 MiB GART (aperture)
[ 24.658841] [drm] Supports vblank timestamp caching Rev 1
(10.10.2010).
[ 24.658846] [drm] No driver support for vblank timestamp query.
[ 24.663971] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga
encoder (output 0)
[ 24.663980] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on TV
encoder (output 1)
[ 24.820907] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb:
0x49000, bo f194bc00
[ 24.821267] fbcon: nouveaufb (fb0) is primary device
[ 24.822774] Console: switching to colour frame buffer device 128x48
[ 24.822812] fb0: nouveaufb frame buffer device
[ 24.822815] drm: registered panic notifier
[ 24.822831] [drm] Initialized nouveau 0.0.16 20090420 for
0000:01:00.0 on minor 0
[ 25.534018] EXT4-fs (sda1): re-mounted. Opts:
errors=remount-ro,commit=0
[ 26.187238] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga
encoder (output 0)
[ 26.187245] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on
CRTC 0 using output A
[ 31.200009] eth0: no IPv6 routers present
[ 32.498065] EXT4-fs (sda1): re-mounted. Opts:
errors=remount-ro,commit=0
Module Size Used by
nouveau 621970 3
snd_emu10k1x 19498 2
snd_ac97_codec 105614 1 snd_emu10k1x
snd_pcm 80042 2 snd_emu10k1x,snd_ac97_codec
arc4 12473 2
ttm 65184 1 nouveau
rt61pci 27265 0
snd_seq_midi 13132 0
crc_itu_t 12627 1 rt61pci
drm_kms_helper 40745 1 nouveau
rt2x00pci 13986 1 rt61pci
snd_rawmidi 25269 2 snd_emu10k1x,snd_seq_midi
rt2x00lib 39075 2 rt61pci,rt2x00pci
snd_seq_midi_event 14475 1 snd_seq_midi
mac80211 257001 2 rt2x00pci,rt2x00lib
snd_seq 51291 2 snd_seq_midi,snd_seq_midi_event
binfmt_misc 13213 1
ppdev 12849 0
snd_timer 28659 2 snd_pcm,snd_seq
drm 180037 5 nouveau,ttm,drm_kms_helper
uvcvideo 66851 0
snd_seq_device 14110 3 snd_seq_midi,snd_rawmidi,snd_seq
dcdbas 14054 0
snd 55295 11
snd_emu10k1x,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
cfg80211 156212 2 rt2x00lib,mac80211
i2c_algo_bit 13184 1 nouveau
soundcore 12600 1 snd
psmouse 73312 0
emu10k1_gp 12566 0
parport_pc 32111 1
gameport 15027 2 emu10k1_gp
ac97_bus 12642 1 snd_ac97_codec
videodev 75143 1 uvcvideo
video 18951 1 nouveau
joydev 17322 0
eeprom_93cx6 12653 1 rt61pci
serio_raw 12990 0
snd_page_alloc 14073 2 snd_emu10k1x,snd_pcm
shpchp 32345 0
lp 13349 0
parport 36746 3 ppdev,parport_pc,lp
hid_microsoft 12745 0
usbhid 41704 0
hid 77084 2 hid_microsoft,usbhid
e100 40108 0
floppy 60032 0
