On Thu, May 19, 2011 at 12:51 PM, Olemis Lang <olemis@xxxxxxxxx> wrote:
> On Thu, May 19, 2011 at 11:42 AM, Antonio Olivares
> <olivares14031@xxxxxxxxx> wrote:
>> Olemis,
>>
> [...]
>>
>>> I ran dgcconfig after installing and it diaplays a message about
>>> existing modules , etc ... should I keep using them or just say «no»
>>> and continue with dgcconfig ?
>>
>> Say No :) This way the existing modules will be replaced with the
>> ones that should work.
>>
>
Hi !
After compiling , installing and setting up dgcmodem driver in amd64 PC ,
I still cannot connect using my dialup connection . Presumably it's some kind
of authentication error .
Nonetheless , I've installed in the same host PC a ''Windows XP'' virtual
machine (''Virtualbox'' 4.0), then installed the drivers, attached ''USB''
modem device and installed ''Windows'' drivers and everything works OOTB . So
there's no problem with user + password nor anything alike .
Q:
- Anyone experiencing similar problems ?
- Is there a solution or a way to troubleshoot the PPP connection ?
Below I pasted logging information. Any help will be appreciated .
===================================
Gnome-PPP log
===================================
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATM1L3DT<phone_number>
--> Waiting for carrier.
ATM1L3DT<phone_number>
CONNECT 57600
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat May 14 11:08:38 2011
--> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
--> --> PAP (Password Authentication Protocol) may be flaky.
--> Warning: Could not modify /etc/ppp/chap-secrets: Permission denied
--> --> CHAP (Challenge Handshake) may be flaky.
--> Pid of pppd: 17729
--> Using interface ppp0
--> Disconnecting at Sat May 14 11:08:40 2011
--> The PPP daemon has died: Authentication error.
--> We failed to authenticate ourselves to the peer.
--> Maybe bad account or password? (exit code = 19)
--> man pppd explains pppd error codes in more detail.
--> I guess that's it for now, exiting
--> The PPP daemon has died. (exit code = 19)
===================================
/var/log/messages
===================================
May 14 11:08:38 swl pppd[17729]: pppd 2.4.5 started by olemis, uid 1000
May 14 11:08:38 swl pppd[17729]: Using interface ppp0
May 14 11:08:38 swl pppd[17729]: Connect: ppp0 <--> /dev/ttyACM0
May 14 11:08:39 swl pppd[17729]: Remote message: Password:
May 14 11:08:40 swl pppd[17729]: Connection terminated.
May 14 11:08:40 swl pppd[17729]: Exit.
--
Regards,
Olemis.
Blog ES: http://simelo-es.blogspot.com/
Blog EN: http://simelo-en.blogspot.com/
Featured article:
