Conexant USB ID 0572:1329 Ubuntu Lucid kernel 2.6.32-27-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everybody !

Recently I acquired an USB conexant modem because my `amd64` laptop has no
built-in modem firmware . The manufacturer provided a CD containing drivers
for multiple OS, including GNU/Linux RPM , DEB and TAR.GZ packages for
`dgcmodem` driver (i.e. `dgcmodem_1.01_i386.deb`).
Besides I ran scanModem script (output is attached , JIC you might need it)
and, since it also recommended to install it, I proceeded with installation.

Nonetheless this is what I get :

{{{
#!sh

$ sudo dpkg -i /tmp/dgcmodem_1.01_i386.deb/dgcmodem_1.01_i386.deb
dpkg: error processing
/tmp/dgcmodem_1.01_i386.deb/dgcmodem_1.01_i386.deb (--install):
 package architecture (i386) does not match system (amd64)
 Errors were encountered while processing:
  /tmp/dgcmodem_1.01_i386.deb/dgcmodem_1.01_i386.deb

}}}

Hence I payed attention to the hints mentioned in `ModemData.txt` and tried
to download dgcmodem-7.80.02.05full_k2.6.32_27_generic_ubuntu_i386.deb.zip
from http://www.linuxant.com/drivers/dgc/downloads-ubuntu-x86.php

Nonetheless highest kernel version I could find in there was 2.6.31_17 ...

Besides I also notice that there's no compiled package for `amd64`
systems in there.
I tried to compile it using source code and make displays a message saying this
is not possible in `amd64` systems ...

:(

Q:
  - How could I install configure and use this modem driver
     (or equivalent) in 64 bits systems?

Thanks in advance !

-- 
Regards,

Olemis.

Blog ES: http://simelo-es.blogspot.com/
Blog EN: http://simelo-en.blogspot.com/

Featured article:
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.32-27-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=x86_64,  Ubuntu ,  ALSA_version=1.0.21
Linux version 2.6.32-27-generic (buildd@crested) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #49-Ubuntu SMP Thu Dec 2 00:51:09 UTC 2010
 scanModem update of:  2010_12_12

Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=deb


The dkms driver upgrade utilities are installed,


Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems.  Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html 
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on x86_64 systems.

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
      cdc_acm snd_hda_intel           

Attached USB devices are:
 ID 0572:1329 Conexant Systems (Rockwell), Inc. 
 ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
 ID 8087:0020  
 ID 0408:1fc3 Quanta Computer, Inc. 
 ID 8087:0020  
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:16.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:16.0	8086:3b64	10cf:152b	Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:16.0 ----
[    0.826558] pci 0000:00:16.0: reg 10 64bit mmio: [0xf0905800-0xf090580f]
[    0.826625] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.826632] pci 0000:00:16.0: PME# disabled

 The PCI slot 00:16.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:3b56	10cf:1531	Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio 

 Modem interrupt assignment and sharing: 
 22:       6442       2471       2504       7110   IO-APIC-fasteoi   HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.826848] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0900000-0xf0903fff]
[    0.826912] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.826918] pci 0000:00:1b.0: PME# disabled
[   24.269418] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   24.269477] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   24.457418] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[17043.368083] HDA Intel 0000:00:1b.0: PCI INT A disabled
[17043.387639] PM: freeze of drv:HDA Intel dev:0000:00:1b.0 complete after 239.317 msecs
[17048.169902] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[17048.169908] HDA Intel 0000:00:1b.0: setting latency timer to 64

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 002:
	Modem chipset  detected on
SLOT="Bus 002 Device 004:"
NAME="Conexant Systems (Rockwell), Inc. "
bus=002
USBmodemID=0572:1329
IDENT=dgcmodem
Driver=dgcmodem

For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html 
 For candidate modem in:  002
    Conexant Systems (Rockwell), Inc. 
      Primary device ID:  0572:1329
 Support type needed or chipset:	dgcmodem
 


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 The modem requires a dgcmodem package.

Modem support packages from Linuxant include resources for compiling drivers.  
If an installer package matching your kernel_version  is not provided,
just install a generic code package.

 From  http://www.linuxant.com/drivers/dgc/downloads-ubuntu-x86.php
 download dgcmodem-7.80.02.05full_k2.6.32_27_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip dgcmodem*.zip
 Then install with:
 $ sudo dpkg -i dgcmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.
002
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 00:16.0:
	Modem chipset not detected on
NAME="Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller "
CLASS=0780
PCIDEV=8086:3b64
SUBSYS=10cf:152b
IRQ=11
HDA2=00:1b.0

 For candidate modem in:  00:16.0
   0780 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller 
      Primary device ID:  8086:3b64
 Support type needed or chipset:	
 


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio "
CLASS=0403
PCIDEV=8086:3b56
SUBSYS=10cf:1531
IRQ=22

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio 
      Primary device ID:  8086:3b56
 Support type needed or chipset:	
 


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.3
             and the compiler used in kernel assembly: 4.4.3


 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.32-27-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 321680 2010-03-07 00:37 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 vmnet1 vmnet8
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux