Hopefully these two files will be of some help. Can't seem to get far enough for a dialtone test even as anything comm related 'hangs' ... seems initialization fails. Noticed a kernel oops during agere module loading in dmesg.txt but I am nowhere near knowledgeable enough to even understand how to interpret this. Thanks again. On Wed, 2011-04-06 at 09:09 -0400, Marvin Stodolsky wrote: > ML > > Please first try an ordinary modem dialout before fax. > The 0x11c11040 chipset may not support fax under Linux as the true > modem port is a /dev/pts/N > FAXing require SOUND capabilities, and I'm not sure whether psuedo > ports /dev/pts/N have that sophistication yet. > > Some Smartlink chipsets working with the slmodemd helper do support fax. > For guidance on this FAX usage, get from > http://linmodems.technion.ac.il/packages/ get faxing.tar.gz. It has > samples for a modem using port /dev/ttySL0. > > But if you need really robust FAX support, best buy a > Hardware/Controller chipset modem. > 3COM/US Robotics does produce one. Also there are the Agere/LSI Venus > chipset modems. > > MarvS > > > On Wed, Apr 6, 2011 at 12:17 AM, M. Lambert <lambertm@xxxxxxxxxxxxxxx> wrote: > > Ok....I ran latest scanmodem and followed instructions. > > > > Build (dkms worked great) and install worked but still obviously > > something not right. > > > > Attaching ModemData.txt (from AFTER build/install) as I hope not too > > difficult to have solution. > > > > Happy to supply any additional needed files but really really badly need > > faxing capability soon. > > > > Thank you :) > >
CPU0 CPU1 0: 42245 0 IO-APIC-edge timer 1: 11 0 IO-APIC-edge i8042 8: 1 0 IO-APIC-edge rtc0 9: 1995 0 IO-APIC-fasteoi acpi 12: 145 0 IO-APIC-edge i8042 14: 13248 0 IO-APIC-edge ata_piix 15: 8429 0 IO-APIC-edge ata_piix 16: 22526 0 IO-APIC-fasteoi uhci_hcd:usb5, i915, yenta 17: 2 0 IO-APIC-fasteoi firewire_ohci 18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4, mmc0, tifm_7xx1 19: 716 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 10751 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 43: 0 0 PCI-MSI-edge eth0 44: 1430 0 PCI-MSI-edge hda_intel 45: 15077 0 PCI-MSI-edge iwl3945 NMI: 0 0 Non-maskable interrupts LOC: 44762 319023 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 0 0 Performance monitoring interrupts PND: 0 0 Performance pending work RES: 3620 6980 Rescheduling interrupts CAL: 793 123 Function call interrupts TLB: 589 484 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 2 2 Machine check polls ERR: 0 MIS: 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.35.11-83.fc14.i686 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.5.1 20100924 (Red Hat 4.5.1-4) (GCC) ) #1 SMP Mon Feb 7 07:04:18 UTC 2011 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f680000 (usable) [ 0.000000] BIOS-e820: 000000007f680000 - 000000007f700000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] DMI present. [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x7f680 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 2 base 07F800000 mask FFF800000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] original variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC [ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC [ 0.000000] total RAM covered: 2039M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G [ 0.000000] New variable MTRRs [ 0.000000] reg 0, base: 0GB, range: 2GB, type WB [ 0.000000] reg 1, base: 2039MB, range: 1MB, type UC [ 0.000000] reg 2, base: 2040MB, range: 8MB, type UC [ 0.000000] initial memory mapped : 0 - 01000000 [ 0.000000] found SMP MP-table at [c00f7670] f7670 [ 0.000000] init_memory_mapping: 0000000000000000-0000000036ffe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0036c00000 page 2M [ 0.000000] 0036c00000 - 0036ffe000 page 4k [ 0.000000] kernel direct mapping tables up to 36ffe000 @ 7000-e000 [ 0.000000] RAMDISK: 373a4000 - 37ff0000 [ 0.000000] Allocated new RAMDISK: 00c32000 - 0187dd07 [ 0.000000] Move RAMDISK from 00000000373a4000 - 0000000037fefd06 to 00c32000 - 0187dd06 [ 0.000000] ACPI: RSDP 000f75e0 00014 (v00 TOSCPL) [ 0.000000] ACPI: RSDT 7f687782 00054 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 7f68fc78 00074 (v01 TOSCPL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: DSDT 7f6894ed 0678B (v01 TOSCPL CALISTGA 06040000 INTL 20060608) [ 0.000000] ACPI: FACS 7f690fc0 00040 [ 0.000000] ACPI: SLIC 7f68fcec 00176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000) [ 0.000000] ACPI: APIC 7f68fe62 00068 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: HPET 7f68feca 00038 (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: MCFG 7f68ff02 0003C (v01 INTEL CALISTGA 06040000 LOHR 0000005A) [ 0.000000] ACPI: BOOT 7f68ffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 7f68ff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000) [ 0.000000] ACPI: SSDT 7f688e9a 0064F (v01 SataRe SataPri 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f688808 00692 (v01 SataRe SataSec 00001000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f687d62 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f687cbc 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624) [ 0.000000] ACPI: SSDT 7f6877d6 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624) [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 [ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@xxxxxxxxxxxxxxx [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 1158MB HIGHMEM available. [ 0.000000] 879MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 36ffe000 [ 0.000000] low ram: 0 - 36ffe000 [ 0.000000] node 0 low ram: 00000000 - 36ffe000 [ 0.000000] node 0 bootmap 0000b000 - 00011e00 [ 0.000000] (13/32 early reservations) ==> bootmem [0000000000 - 0036ffe000] [ 0.000000] #0 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #1 [0000400000 - 0000c2c8c0] TEXT DATA BSS ==> [0000400000 - 0000c2c8c0] [ 0.000000] #2 [0000c2d000 - 0000c310f0] BRK ==> [0000c2d000 - 0000c310f0] [ 0.000000] #3 [00000f7680 - 0000100000] BIOS reserved ==> [00000f7680 - 0000100000] [ 0.000000] #4 [00000f7670 - 00000f7680] MP-table mpf ==> [00000f7670 - 00000f7680] [ 0.000000] #5 [000009f800 - 000009fd71] BIOS reserved ==> [000009f800 - 000009fd71] [ 0.000000] #6 [000009fef5 - 00000f7670] BIOS reserved ==> [000009fef5 - 00000f7670] [ 0.000000] #7 [000009fd71 - 000009fef5] MP-table mpc ==> [000009fd71 - 000009fef5] [ 0.000000] #8 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] [ 0.000000] #9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #10 [0000007000 - 000000b000] PGTABLE ==> [0000007000 - 000000b000] [ 0.000000] #11 [0000c32000 - 000187e000] NEW RAMDISK ==> [0000c32000 - 000187e000] [ 0.000000] #12 [000000b000 - 0000012000] BOOTMAP ==> [000000b000 - 0000012000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000001 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00036ffe [ 0.000000] HighMem 0x00036ffe -> 0x0007f680 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000001 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007f680 [ 0.000000] On node 0 totalpages: 521758 [ 0.000000] free_area_init_node: node 0, pgdat c09fe100, node_mem_map c187f020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3966 pages, LIFO batch:0 [ 0.000000] Normal zone: 1728 pages used for memmap [ 0.000000] Normal zone: 219454 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2318 pages used for memmap [ 0.000000] HighMem zone: 294260 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2c00000 s35072 r0 d22272 u2097152 [ 0.000000] pcpu-alloc: s35072 r0 d22272 u2097152 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517680 [ 0.000000] Kernel command line: ro root=/dev/mapper/vg_laptop-lv_root rd_LVM_LV=vg_laptop/lv_root rd_LVM_LV=vg_laptop/lv_swap rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rhgb quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 10437100 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00036ffe:0007f680) [ 0.000000] Memory: 2038540k/2087424k available (3765k kernel code, 48492k reserved, 2494k data, 544k init, 1186312k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xff575000 - 0xfffff000 (10792 kB) [ 0.000000] pkmap : 0xff000000 - 0xff400000 (4096 kB) [ 0.000000] vmalloc : 0xf77fe000 - 0xfeffe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf6ffe000 ( 879 MB) [ 0.000000] .init : 0xc0a1d000 - 0xc0aa5000 ( 544 kB) [ 0.000000] .data : 0xc07ad46e - 0xc0a1ce70 (2494 kB) [ 0.000000] .text : 0xc0400000 - 0xc07ad46e (3765 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:2304 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1728.701 MHz processor. [ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 3457.40 BogoMIPS (lpj=1728701) [ 0.001013] pid_max: default: 32768 minimum: 301 [ 0.001044] Security Framework initialized [ 0.001058] SELinux: Initializing. [ 0.001069] SELinux: Starting in permissive mode [ 0.001141] Mount-cache hash table entries: 512 [ 0.001332] Initializing cgroup subsys ns [ 0.001340] Initializing cgroup subsys cpuacct [ 0.001346] Initializing cgroup subsys memory [ 0.001358] Initializing cgroup subsys devices [ 0.001361] Initializing cgroup subsys freezer [ 0.001364] Initializing cgroup subsys net_cls [ 0.001368] Initializing cgroup subsys blkio [ 0.001413] CPU: Physical Processor ID: 0 [ 0.001415] CPU: Processor Core ID: 0 [ 0.001419] mce: CPU supports 6 MCE banks [ 0.001430] CPU0: Thermal monitoring handled by SMI [ 0.001435] using mwait in idle threads. [ 0.001445] Performance Events: PEBS fmt0-, Core2 events, Intel PMU driver. [ 0.001452] PEBS disabled due to CPU errata. [ 0.001460] ... version: 2 [ 0.001463] ... bit width: 40 [ 0.001465] ... generic registers: 2 [ 0.001467] ... value mask: 000000ffffffffff [ 0.001470] ... max period: 000000007fffffff [ 0.001472] ... fixed-purpose events: 3 [ 0.001475] ... event mask: 0000000700000003 [ 0.002201] ACPI: Core revision 20100428 [ 0.002204] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.007883] ACPI: Forced DSDT copy: length 0x0678B copied locally, original unmapped [ 0.015011] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.015019] ftrace: allocating 23143 entries in 46 pages [ 0.017073] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.017592] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.027703] CPU0: Intel(R) Core(TM)2 CPU T5300 @ 1.73GHz stepping 02 [ 0.027999] Booting Node 0, Processors #1 Ok. [ 0.001999] Initializing CPU#1 [ 0.001999] CPU1: Thermal monitoring handled by SMI [ 0.099019] Brought up 2 CPUs [ 0.099025] Total of 2 processors activated (6984.42 BogoMIPS). [ 0.099583] sizeof(vma)=88 bytes [ 0.099585] sizeof(page)=32 bytes [ 0.099587] sizeof(inode)=352 bytes [ 0.099589] sizeof(dentry)=132 bytes [ 0.099591] sizeof(ext3inode)=508 bytes [ 0.099593] sizeof(buffer_head)=56 bytes [ 0.099595] sizeof(skbuff)=192 bytes [ 0.099598] sizeof(task_struct)=3228 bytes [ 0.099664] devtmpfs: initialized [ 0.101452] atomic64 test passed for i586+ platform with CX8 and with SSE [ 0.101494] Time: 3:57:31 Date: 04/06/11 [ 0.101544] NET: Registered protocol family 16 [ 0.101670] ACPI: bus type pci registered [ 0.101769] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.101773] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.101776] PCI: Using MMCONFIG for extended config space [ 0.101779] PCI: Using configuration type 1 for base access [ 0.103373] bio: create slab <bio-0> at 0 [ 0.105437] ACPI: EC: Look up EC in DSDT [ 0.109052] ACPI: BIOS _OSI(Linux) query ignored [ 0.112069] ACPI: SSDT 7f688508 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.112531] ACPI: Dynamic OEM Table Load: [ 0.112535] ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624) [ 0.112896] ACPI: SSDT 7f687fc1 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.113338] ACPI: Dynamic OEM Table Load: [ 0.113342] ACPI: SSDT (null) 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050624) [ 0.113877] ACPI: SSDT 7f688740 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.114333] ACPI: Dynamic OEM Table Load: [ 0.114337] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624) [ 0.114531] ACPI: SSDT 7f688483 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.114967] ACPI: Dynamic OEM Table Load: [ 0.114971] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624) [ 0.115560] ACPI: Interpreter enabled [ 0.115565] ACPI: (supports S0 S3 S4 S5) [ 0.115593] ACPI: Using IOAPIC for interrupt routing [ 0.170266] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62 [ 0.170741] ACPI: No dock devices found. [ 0.170746] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.171192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.172058] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 0.172062] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 0.172066] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 0.172070] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) [ 0.172073] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) [ 0.172077] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) [ 0.172081] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 0.172162] pci 0000:00:02.0: reg 10: [mem 0xdc100000-0xdc17ffff] [ 0.172168] pci 0000:00:02.0: reg 14: [io 0x1800-0x1807] [ 0.172175] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref] [ 0.172181] pci 0000:00:02.0: reg 1c: [mem 0xdc200000-0xdc23ffff] [ 0.172229] pci 0000:00:02.1: reg 10: [mem 0xdc180000-0xdc1fffff] [ 0.172354] pci 0000:00:1b.0: reg 10: [mem 0xdc440000-0xdc443fff 64bit] [ 0.172423] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.172429] pci 0000:00:1b.0: PME# disabled [ 0.172539] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.172545] pci 0000:00:1c.0: PME# disabled [ 0.172657] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.172663] pci 0000:00:1c.1: PME# disabled [ 0.172776] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.172782] pci 0000:00:1c.2: PME# disabled [ 0.172856] pci 0000:00:1d.0: reg 20: [io 0x1820-0x183f] [ 0.172928] pci 0000:00:1d.1: reg 20: [io 0x1840-0x185f] [ 0.173004] pci 0000:00:1d.2: reg 20: [io 0x1860-0x187f] [ 0.173076] pci 0000:00:1d.3: reg 20: [io 0x1880-0x189f] [ 0.173145] pci 0000:00:1d.7: reg 10: [mem 0xdc444000-0xdc4443ff] [ 0.173217] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.173224] pci 0000:00:1d.7: PME# disabled [ 0.173403] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [ 0.173409] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO [ 0.173417] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1670 (mask 000f) [ 0.173492] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007] [ 0.173501] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003] [ 0.173510] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007] [ 0.173518] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003] [ 0.173527] pci 0000:00:1f.2: reg 20: [io 0x18b0-0x18bf] [ 0.173568] pci 0000:00:1f.2: PME# supported from D3hot [ 0.173574] pci 0000:00:1f.2: PME# disabled [ 0.173640] pci 0000:00:1f.3: reg 20: [io 0x18c0-0x18df] [ 0.173745] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.173751] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.173758] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd7ffffff] [ 0.173767] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.173935] pci 0000:04:00.0: reg 10: [mem 0xd8000000-0xd8000fff] [ 0.174191] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.174205] pci 0000:04:00.0: PME# disabled [ 0.174278] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.174294] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 0.174300] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.174306] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.174316] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff 64bit pref] [ 0.174433] pci 0000:05:00.0: reg 10: [io 0x4000-0x40ff] [ 0.174464] pci 0000:05:00.0: reg 18: [mem 0xda000000-0xda000fff 64bit] [ 0.174497] pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.174565] pci 0000:05:00.0: supports D1 D2 [ 0.174568] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.174575] pci 0000:05:00.0: PME# disabled [ 0.174608] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.174616] pci 0000:00:1c.2: PCI bridge to [bus 05-05] [ 0.174622] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.174628] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff] [ 0.174638] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref] [ 0.174719] pci 0000:06:04.0: reg 10: [mem 0x00000000-0x00000fff] [ 0.174751] pci 0000:06:04.0: supports D1 D2 [ 0.174753] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.174760] pci 0000:06:04.0: PME# disabled [ 0.174806] pci 0000:06:04.1: reg 10: [mem 0xdc005000-0xdc0057ff] [ 0.174817] pci 0000:06:04.1: reg 14: [mem 0xdc000000-0xdc003fff] [ 0.174886] pci 0000:06:04.1: supports D1 D2 [ 0.174889] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot [ 0.174895] pci 0000:06:04.1: PME# disabled [ 0.174940] pci 0000:06:04.2: reg 10: [mem 0xdc004000-0xdc004fff] [ 0.175017] pci 0000:06:04.2: supports D1 D2 [ 0.175020] pci 0000:06:04.2: PME# supported from D0 D1 D2 D3hot [ 0.175025] pci 0000:06:04.2: PME# disabled [ 0.175071] pci 0000:06:04.3: reg 10: [mem 0xdc005800-0xdc0058ff] [ 0.175146] pci 0000:06:04.3: supports D1 D2 [ 0.175149] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot [ 0.175155] pci 0000:06:04.3: PME# disabled [ 0.175230] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode) [ 0.175236] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.175242] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.175252] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.175256] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.175259] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 0.175320] pci_bus 0000:07: [bus 07-0a] partially hidden behind transparent bridge 0000:06 [bus 06-06] [ 0.175352] pci_bus 0000:00: on NUMA node 0 [ 0.175358] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.175611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.175710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.175810] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.175938] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.185130] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.185240] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 [ 0.185349] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.185460] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.185567] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.185675] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.185782] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.185889] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.185945] HEST: Table is not found! [ 0.186020] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.186040] vgaarb: loaded [ 0.186174] SCSI subsystem initialized [ 0.186186] libata version 3.00 loaded. [ 0.186186] usbcore: registered new interface driver usbfs [ 0.186186] usbcore: registered new interface driver hub [ 0.186186] usbcore: registered new device driver usb [ 0.186186] PCI: Using ACPI for IRQ routing [ 0.186186] PCI: pci_cache_line_size set to 64 bytes [ 0.186196] reserve RAM buffer: 000000000009f800 - 000000000009ffff [ 0.186200] reserve RAM buffer: 000000007f680000 - 000000007fffffff [ 0.186324] NetLabel: Initializing [ 0.186326] NetLabel: domain hash size = 128 [ 0.186328] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.186345] NetLabel: unlabeled traffic allowed by default [ 0.186353] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.186361] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.186367] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.189025] Switching to clocksource tsc [ 0.205571] pnp: PnP ACPI init [ 0.205604] ACPI: bus type pnp registered [ 0.206117] pnp 00:00: [bus 00-ff] [ 0.206121] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.206124] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.206127] pnp 00:00: [io 0x0d00-0xffff window] [ 0.206130] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.206133] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.206136] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.206139] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.206142] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.206145] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.206148] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.206151] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.206154] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.206157] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.206160] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.206163] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.206166] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.206169] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.206172] pnp 00:00: [mem 0x80000000-0xfebfffff window] [ 0.206176] pnp 00:00: [mem 0xfed40000-0xfed44fff window] [ 0.206261] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.206317] pnp 00:01: [io 0xfe00-0xfe7f] [ 0.206320] pnp 00:01: [io 0xfe80-0xfeff] [ 0.206323] pnp 00:01: [io 0xff00-0xff7f] [ 0.206326] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.206328] pnp 00:01: [mem 0xfed14000-0xfed17fff] [ 0.206331] pnp 00:01: [mem 0xfed18000-0xfed18fff] [ 0.206334] pnp 00:01: [mem 0xfed19000-0xfed19fff] [ 0.206337] pnp 00:01: [mem 0xfed1c000-0xfed1ffff] [ 0.206339] pnp 00:01: [mem 0xfed20000-0xfed3ffff] [ 0.206342] pnp 00:01: [mem 0xfed40000-0xfed44fff] [ 0.206345] pnp 00:01: [mem 0xfed45000-0xfed8ffff] [ 0.206447] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.207136] pnp 00:02: [io 0x0000-0x001f] [ 0.207139] pnp 00:02: [io 0x0081-0x0091] [ 0.207142] pnp 00:02: [io 0x0093-0x009f] [ 0.207144] pnp 00:02: [io 0x00c0-0x00df] [ 0.207147] pnp 00:02: [dma 4] [ 0.207199] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.207214] pnp 00:03: [mem 0xff000000-0xffffffff] [ 0.207260] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active) [ 0.207400] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.207472] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active) [ 0.207490] pnp 00:05: [io 0x00f0] [ 0.207507] pnp 00:05: [irq 13] [ 0.207561] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.207578] pnp 00:06: [io 0x002e-0x002f] [ 0.207580] pnp 00:06: [io 0x0061] [ 0.207583] pnp 00:06: [io 0x0063] [ 0.207586] pnp 00:06: [io 0x0065] [ 0.207591] pnp 00:06: [io 0x0067] [ 0.207594] pnp 00:06: [io 0x0070] [ 0.207596] pnp 00:06: [io 0x0080] [ 0.207599] pnp 00:06: [io 0x0092] [ 0.207601] pnp 00:06: [io 0x00b2-0x00b3] [ 0.207604] pnp 00:06: [io 0x0800-0x080f] [ 0.207606] pnp 00:06: [io 0x1000-0x107f] [ 0.207609] pnp 00:06: [io 0x1180-0x11bf] [ 0.207698] pnp 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.207712] pnp 00:07: [io 0x0070-0x0077] [ 0.207719] pnp 00:07: [irq 8] [ 0.207768] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.232885] pnp 00:08: [io 0x0060] [ 0.232888] pnp 00:08: [io 0x0064] [ 0.232895] pnp 00:08: [irq 1] [ 0.232948] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.232966] pnp 00:09: [irq 12] [ 0.233021] pnp 00:09: Plug and Play ACPI device, IDs SYN0705 SYN0700 SYN0002 PNP0f13 (active) [ 0.233103] pnp: PnP ACPI: found 10 devices [ 0.233105] ACPI: ACPI bus type pnp unregistered [ 0.233121] system 00:01: [io 0xfe00-0xfe7f] has been reserved [ 0.233124] system 00:01: [io 0xfe80-0xfeff] has been reserved [ 0.233128] system 00:01: [io 0xff00-0xff7f] has been reserved [ 0.233133] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.233137] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved [ 0.233141] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.233144] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.233148] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.233152] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.233156] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.233160] system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.233168] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved [ 0.233176] system 00:06: [io 0x0800-0x080f] has been reserved [ 0.233180] system 00:06: [io 0x1000-0x107f] has been reserved [ 0.233184] system 00:06: [io 0x1180-0x11bf] has been reserved [ 0.270135] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.270140] pci 0000:00:1e.0: BAR 13: assigned [io 0x5000-0x5fff] [ 0.270143] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.270148] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 0.270156] pci 0000:00:1c.0: bridge window [mem 0xd6000000-0xd7ffffff] [ 0.270163] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.270172] pci 0000:00:1c.1: PCI bridge to [bus 04-04] [ 0.270176] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.270184] pci 0000:00:1c.1: bridge window [mem 0xd8000000-0xd9ffffff] [ 0.270191] pci 0000:00:1c.1: bridge window [mem 0xd2000000-0xd3ffffff 64bit pref] [ 0.270201] pci 0000:05:00.0: BAR 6: assigned [mem 0xd4000000-0xd401ffff pref] [ 0.270205] pci 0000:00:1c.2: PCI bridge to [bus 05-05] [ 0.270209] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff] [ 0.270217] pci 0000:00:1c.2: bridge window [mem 0xda000000-0xdbffffff] [ 0.270223] pci 0000:00:1c.2: bridge window [mem 0xd4000000-0xd5ffffff 64bit pref] [ 0.270234] pci 0000:06:04.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref] [ 0.270239] pci 0000:06:04.0: BAR 16: assigned [mem 0x84000000-0x87ffffff] [ 0.270242] pci 0000:06:04.0: BAR 0: assigned [mem 0xdc006000-0xdc006fff] [ 0.270250] pci 0000:06:04.0: BAR 0: set to [mem 0xdc006000-0xdc006fff] (PCI address [0xdc006000-0xdc006fff] [ 0.270254] pci 0000:06:04.0: BAR 13: assigned [io 0x5000-0x50ff] [ 0.270258] pci 0000:06:04.0: BAR 14: assigned [io 0x5400-0x54ff] [ 0.270261] pci 0000:06:04.0: CardBus bridge to [bus 07-0a] [ 0.270263] pci 0000:06:04.0: bridge window [io 0x5000-0x50ff] [ 0.270270] pci 0000:06:04.0: bridge window [io 0x5400-0x54ff] [ 0.270277] pci 0000:06:04.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.270283] pci 0000:06:04.0: bridge window [mem 0x84000000-0x87ffffff] [ 0.270290] pci 0000:00:1e.0: PCI bridge to [bus 06-06] [ 0.270294] pci 0000:00:1e.0: bridge window [io 0x5000-0x5fff] [ 0.270302] pci 0000:00:1e.0: bridge window [mem 0xdc000000-0xdc0fffff] [ 0.270308] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref] [ 0.270332] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.270340] pci 0000:00:1c.0: setting latency timer to 64 [ 0.270353] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.270360] pci 0000:00:1c.1: setting latency timer to 64 [ 0.270373] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.270379] pci 0000:00:1c.2: setting latency timer to 64 [ 0.270389] pci 0000:00:1e.0: setting latency timer to 64 [ 0.270403] pci 0000:06:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.270411] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.270414] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.270417] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.270420] pci_bus 0000:02: resource 1 [mem 0xd6000000-0xd7ffffff] [ 0.270424] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.270427] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff] [ 0.270430] pci_bus 0000:04: resource 1 [mem 0xd8000000-0xd9ffffff] [ 0.270433] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd3ffffff 64bit pref] [ 0.270436] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff] [ 0.270439] pci_bus 0000:05: resource 1 [mem 0xda000000-0xdbffffff] [ 0.270442] pci_bus 0000:05: resource 2 [mem 0xd4000000-0xd5ffffff 64bit pref] [ 0.270446] pci_bus 0000:06: resource 0 [io 0x5000-0x5fff] [ 0.270449] pci_bus 0000:06: resource 1 [mem 0xdc000000-0xdc0fffff] [ 0.270452] pci_bus 0000:06: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.270455] pci_bus 0000:06: resource 4 [io 0x0000-0xffff] [ 0.270458] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff] [ 0.270461] pci_bus 0000:07: resource 0 [io 0x5000-0x50ff] [ 0.270464] pci_bus 0000:07: resource 1 [io 0x5400-0x54ff] [ 0.270467] pci_bus 0000:07: resource 2 [mem 0x80000000-0x83ffffff pref] [ 0.270470] pci_bus 0000:07: resource 3 [mem 0x84000000-0x87ffffff] [ 0.270506] NET: Registered protocol family 2 [ 0.270561] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.270744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.271418] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.271710] TCP: Hash tables configured (established 131072 bind 65536) [ 0.271713] TCP reno registered [ 0.271717] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.271729] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.271829] NET: Registered protocol family 1 [ 0.271857] pci 0000:00:02.0: Boot video device [ 0.272030] PCI: CLS 64 bytes, default 64 [ 0.272111] Trying to unpack rootfs image as initramfs... [ 0.737130] Freeing initrd memory: 12592k freed [ 0.746193] Simple Boot Flag at 0x36 set to 0x1 [ 0.746717] apm: BIOS not found. [ 0.746895] audit: initializing netlink socket (disabled) [ 0.746914] type=2000 audit(1302062251.745:1): initialized [ 0.760920] highmem bounce pool size: 64 pages [ 0.760927] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.763509] VFS: Disk quotas dquot_6.5.2 [ 0.763665] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.764314] msgmni has been set to 1689 [ 0.764391] SELinux: Registering netfilter hooks [ 0.764819] alg: No test for stdrng (krng) [ 0.764887] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.764894] io scheduler noop registered [ 0.764897] io scheduler deadline registered [ 0.764913] io scheduler cfq registered (default) [ 0.765156] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.765222] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X [ 0.765351] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.765409] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X [ 0.765534] pcieport 0000:00:1c.2: setting latency timer to 64 [ 0.765598] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X [ 0.765747] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.765883] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.765886] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.766159] acpiphp: Slot [1] registered [ 0.766317] pci-stub: invalid id string "" [ 0.766441] intel_idle: MWAIT substates: 0x22220 [ 0.766443] intel_idle: does not run on family 6 model 15 [ 0.766587] ACPI: AC Adapter [ACAD] (on-line) [ 0.766691] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.766734] ACPI: Lid Switch [LID0] [ 0.766801] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.766808] ACPI: Power Button [PWRB] [ 0.766888] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.766892] ACPI: Power Button [PWRF] [ 0.767200] ACPI: acpi_idle registered with cpuidle [ 0.770145] Monitor-Mwait will be used to enter C-1 state [ 0.770183] Monitor-Mwait will be used to enter C-2 state [ 0.770220] Monitor-Mwait will be used to enter C-3 state [ 0.770230] Marking TSC unstable due to TSC halts in idle [ 0.770297] Switching to clocksource hpet [ 0.798370] ERST: Table is not found! [ 0.798408] isapnp: Scanning for PnP cards... [ 0.939140] ACPI: Battery Slot [BAT1] (battery present) [ 1.155271] isapnp: No Plug & Play device found [ 1.155634] Non-volatile memory driver v1.3 [ 1.155638] Linux agpgart interface v0.103 [ 1.155786] agpgart-intel 0000:00:00.0: Intel 945GM Chipset [ 1.156500] agpgart-intel 0000:00:00.0: detected 7932K stolen memory [ 1.160039] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 [ 1.160159] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.162180] brd: module loaded [ 1.162968] loop: module loaded [ 1.163108] ata_piix 0000:00:1f.2: version 2.13 [ 1.163134] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.163141] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] [ 1.314055] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.314189] scsi0 : ata_piix [ 1.314334] scsi1 : ata_piix [ 1.315612] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14 [ 1.315616] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15 [ 1.315684] Fixed MDIO Bus: probed [ 1.315755] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.315783] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.315801] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.315807] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.315883] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.315906] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 1.315921] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.319823] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 1.319845] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdc444000 [ 1.329022] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.329065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.329069] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329072] usb usb1: Product: EHCI Host Controller [ 1.329074] usb usb1: Manufacturer: Linux 2.6.35.11-83.fc14.i686 ehci_hcd [ 1.329077] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.329210] hub 1-0:1.0: USB hub found [ 1.329216] hub 1-0:1.0: 8 ports detected [ 1.329325] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.329346] uhci_hcd: USB Universal Host Controller Interface driver [ 1.329373] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.329381] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.329385] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.329436] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.329470] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 [ 1.329511] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.329515] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329518] usb usb2: Product: UHCI Host Controller [ 1.329520] usb usb2: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.329523] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.329641] hub 2-0:1.0: USB hub found [ 1.329648] hub 2-0:1.0: 2 ports detected [ 1.329739] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.329747] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.329751] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.329802] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.329847] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 [ 1.329886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.329890] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.329893] usb usb3: Product: UHCI Host Controller [ 1.329895] usb usb3: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.329898] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.330039] hub 3-0:1.0: USB hub found [ 1.330045] hub 3-0:1.0: 2 ports detected [ 1.330128] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.330136] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.330141] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.330190] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.330232] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 [ 1.330271] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.330274] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.330277] usb usb4: Product: UHCI Host Controller [ 1.330280] usb usb4: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.330283] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.330405] hub 4-0:1.0: USB hub found [ 1.330410] hub 4-0:1.0: 2 ports detected [ 1.330494] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.330501] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.330506] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.330555] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 1.330598] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880 [ 1.330637] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.330641] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.330644] usb usb5: Product: UHCI Host Controller [ 1.330646] usb usb5: Manufacturer: Linux 2.6.35.11-83.fc14.i686 uhci_hcd [ 1.330649] usb usb5: SerialNumber: 0000:00:1d.3 [ 1.330766] hub 5-0:1.0: USB hub found [ 1.330772] hub 5-0:1.0: 2 ports detected [ 1.330939] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.331291] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.331394] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.331403] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.331407] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.331412] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.331416] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.331479] mice: PS/2 mouse device common for all mice [ 1.331730] rtc_cmos 00:07: RTC can wake from S4 [ 1.331789] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 1.331825] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.331956] device-mapper: uevent: version 1.0.3 [ 1.332126] device-mapper: ioctl: 4.19.1-ioctl (2010-10-12) initialised: dm-devel@xxxxxxxxxx [ 1.332369] cpuidle: using governor ladder [ 1.332518] cpuidle: using governor menu [ 1.332822] usbcore: registered new interface driver hiddev [ 1.332839] usbcore: registered new interface driver usbhid [ 1.332842] usbhid: USB HID core driver [ 1.332868] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.333047] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 1.333050] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 1.333053] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 1.333148] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.333165] TCP cubic registered [ 1.333167] Initializing XFRM netlink socket [ 1.333185] NET: Registered protocol family 17 [ 1.333225] Using IPI No-Shortcut mode [ 1.333331] PM: Resume from disk failed. [ 1.333347] registered taskstats version 1 [ 1.333784] Magic number: 7:195:967 [ 1.333881] rtc_cmos 00:07: setting system clock to 2011-04-06 03:57:33 UTC (1302062253) [ 1.333930] Initalizing network drop monitor service [ 1.334349] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.469658] ata1.00: ATA-7: TOSHIBA MK1637GSX, DL030M, max UDMA/100 [ 1.469667] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.473611] ata1.00: configured for UDMA/100 [ 1.473941] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1637GS DL03 PQ: 0 ANSI: 5 [ 1.474181] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.474197] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) [ 1.474273] sd 0:0:0:0: [sda] Write Protect is off [ 1.474277] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.474308] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.474526] sda: [ 1.504512] ata2.00: ATAPI: TSSTcorpCD/DVDW TS-L632D, TO04, max UDMA/33 [ 1.506592] sda1 sda2 [ 1.506992] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.545473] ata2.00: configured for UDMA/33 [ 1.552540] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632D TO04 PQ: 0 ANSI: 5 [ 1.581185] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.581194] Uniform CD-ROM driver Revision: 3.20 [ 1.581364] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.581430] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.581502] Freeing unused kernel memory: 544k freed [ 1.581887] Write protecting the kernel text: 3768k [ 1.581969] Write protecting the kernel read-only data: 1840k [ 1.599668] dracut: dracut-006-6.fc14 [ 1.606950] dracut: rd_NO_LUKS: removing cryptoluks activation [ 1.616342] udev[84]: starting version 161 [ 1.631292] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 1.681853] acpi device:07: registered as cooling_device2 [ 1.682226] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4 [ 1.682303] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 1.713547] [drm] Initialized drm 1.1.0 20060810 [ 1.741464] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.741471] i915 0000:00:02.0: setting latency timer to 64 [ 1.766999] usb 1-1: New USB device found, idVendor=0c0b, idProduct=b159 [ 1.767004] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.767008] usb 1-1: Product: DataStation maxi m.u [ 1.767011] usb 1-1: Manufacturer: Trekstor [ 1.767013] usb 1-1: SerialNumber: 0009404f [ 1.767102] [drm] set up 7M of stolen space [ 1.777119] Initializing USB Mass Storage driver... [ 1.777246] scsi2 : usb-storage 1-1:1.0 [ 1.777434] usbcore: registered new interface driver usb-storage [ 1.777437] USB Mass Storage support registered. [ 1.874112] [drm] initialized overlay support [ 1.903372] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0 [ 1.903378] synaptics: Toshiba Satellite P200 detected, limiting rate to 40pps. [ 1.933739] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 1.972288] usb 1-6: new high speed USB device using ehci_hcd and address 5 [ 2.100380] usb 1-6: New USB device found, idVendor=04f2, idProduct=b008 [ 2.100384] usb 1-6: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.100388] usb 1-6: Product: Chicony USB 2.0 Camera [ 2.100390] usb 1-6: Manufacturer: Chicony Electronics Co., Ltd. [ 2.100393] usb 1-6: SerialNumber: SN0001 [ 2.308278] usb 2-2: new low speed USB device using uhci_hcd and address 2 [ 2.470519] usb 2-2: New USB device found, idVendor=046d, idProduct=c03d [ 2.470527] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.470535] usb 2-2: Product: USB-PS/2 Optical Mouse [ 2.470540] usb 2-2: Manufacturer: Logitech [ 2.486914] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6 [ 2.487072] generic-usb 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2/input0 [ 2.510030] fbcon: inteldrmfb (fb0) is primary device [ 2.624526] Console: switching to colour frame buffer device 160x56 [ 2.630779] fb0: inteldrmfb frame buffer device [ 2.630782] drm: registered panic notifier [ 2.630786] Slow work thread pool: Starting up [ 2.630929] Slow work thread pool: Ready [ 2.630938] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 2.654750] dracut: Starting plymouth daemon [ 2.694039] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 2.788662] scsi 2:0:0:0: Direct-Access WDC WD50 00AAVS-00ZTB0 PQ: 0 ANSI: 2 [ 2.789745] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 2.791881] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.794126] sd 2:0:0:0: [sdb] Write Protect is off [ 2.794130] sd 2:0:0:0: [sdb] Mode Sense: 38 00 00 00 [ 2.794133] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.797627] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.797700] sdb: sdb1 [ 2.826870] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 2.826932] sd 2:0:0:0: [sdb] Attached SCSI disk [ 2.940327] usb 3-1: New USB device found, idVendor=04d9, idProduct=1603 [ 2.940332] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.940336] usb 3-1: Product: USB Keyboard [ 2.940338] usb 3-1: Manufacturer: [ 2.991233] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input7 [ 2.991374] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:1d.1-1/input0 [ 3.084162] input: USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input8 [ 3.084299] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:1d.1-1/input1 [ 3.151693] dracut: rd_NO_DM: removing DM RAID activation [ 3.156338] dracut: rd_NO_MD: removing MD RAID activation [ 3.358308] yenta_cardbus 0000:06:04.0: CardBus bridge found [1179:ff00] [ 3.358333] yenta_cardbus 0000:06:04.0: Enabling burst memory read transactions [ 3.358340] yenta_cardbus 0000:06:04.0: Using CSCINT to route CSC interrupts to PCI [ 3.358343] yenta_cardbus 0000:06:04.0: Routing CardBus interrupts to PCI [ 3.358350] yenta_cardbus 0000:06:04.0: TI: mfunc 0x10aa1b22, devctl 0x64 [ 3.447345] sdhci: Secure Digital Host Controller Interface driver [ 3.447353] sdhci: Copyright(c) Pierre Ossman [ 3.582428] yenta_cardbus 0000:06:04.0: ISA IRQ mask 0x0cf8, PCI irq 16 [ 3.582434] yenta_cardbus 0000:06:04.0: Socket status: 30000006 [ 3.582439] pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #06 to #0a [ 3.582452] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [io 0x5000-0x5fff] [ 3.582457] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x5000-0x5fff: excluding 0x5000-0x50ff 0x5400-0x54ff [ 3.590202] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0xdc000000-0xdc0fffff] [ 3.590207] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdc000000-0xdc0fffff: excluding 0xdc000000-0xdc00ffff [ 3.590228] yenta_cardbus 0000:06:04.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref] [ 3.590232] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff: excluding 0x80000000-0x83ffffff [ 3.590833] firewire_ohci 0000:06:04.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.641136] firewire_ohci: Added fw-ohci device 0000:06:04.1, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x2 [ 3.641222] sdhci-pci 0000:06:04.3: SDHCI controller found [104c:803c] (rev 0) [ 3.641306] sdhci-pci 0000:06:04.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.641401] Registered led device: mmc0:: [ 3.641459] mmc0: SDHCI controller on PCI [0000:06:04.3] using DMA [ 3.668971] dracut: Scanning devices sda2 for LVM logical volumes vg_laptop/lv_root vg_laptop/lv_swap [ 3.689827] dracut: inactive '/dev/vg_laptop/lv_root' [50.00 GiB] inherit [ 3.689943] dracut: inactive '/dev/vg_laptop/lv_home' [94.59 GiB] inherit [ 3.690056] dracut: inactive '/dev/vg_laptop/lv_swap' [3.94 GiB] inherit [ 4.142401] firewire_core: created device fw0: GUID 00023f75bd401db9, S400 [ 4.145091] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) [ 4.233177] dracut: Mounted root filesystem /dev/mapper/vg_laptop-lv_root [ 4.383921] dracut: Loading SELinux policy [ 4.840147] SELinux: Disabled at runtime. [ 4.840189] SELinux: Unregistering netfilter hooks [ 4.843144] type=1404 audit(1302062257.008:2): selinux=0 auid=4294967295 ses=4294967295 [ 4.911405] dracut: /sbin/load_policy: Can't load policy: No such file or directory [ 5.034462] dracut: Switching root [ 6.118770] readahead-collector: starting [ 7.185071] udev[513]: starting version 161 [ 8.738261] microcode: CPU0 sig=0x6f2, pf=0x20, revision=0x57 [ 8.738286] microcode: CPU1 sig=0x6f2, pf=0x20, revision=0x57 [ 8.738421] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 9.500163] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 9.500205] r8169 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 9.500323] r8169 0000:05:00.0: setting latency timer to 64 [ 9.500418] r8169 0000:05:00.0: irq 43 for MSI/MSI-X [ 9.500575] r8169 0000:05:00.0: eth0: RTL8101e at 0xf84c4000, 00:16:d4:fc:24:f5, XID 14000000 IRQ 43 [ 9.509637] intel_rng: FWH not detected [ 9.515083] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.515091] ACPI: resource 0000:00:1f.3 [io 0x18c0-0x18df] conflicts with ACPI region SMBI [??? 0x000018c0-0x000018cf flags 0x49] [ 9.515095] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.572591] iTCO_vendor_support: vendor-support=0 [ 9.679707] Linux video capture interface: v2.00 [ 9.799816] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377 [ 9.802040] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7 [ 9.803029] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 9.803845] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 9.804754] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xdc000-0xfffff [ 9.804894] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff: clean. [ 9.805042] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff: excluding 0x60000000-0x60ffffff [ 9.805178] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 9.873985] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 9.874115] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060) [ 9.874207] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.964509] tifm_7xx1 0000:06:04.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 9.965883] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 9.969268] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6:1.0/input/input9 [ 9.969360] usbcore: registered new interface driver uvcvideo [ 9.969363] USB Video Class driver (v1.0.0) [ 10.058928] leds_ss4200: no LED devices found [ 10.305340] microcode: CPU0 updated to revision 0x5c, date = 2010-10-02 [ 10.305824] microcode: CPU1 updated to revision 0x5c, date = 2010-10-02 [ 10.853866] cfg80211: Calling CRDA to update world regulatory domain [ 11.002082] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 11.002221] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X [ 11.002319] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 11.214805] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, in-tree:ds [ 11.214809] iwl3945: Copyright(c) 2003-2010 Intel Corporation [ 11.214992] iwl3945 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.215021] iwl3945 0000:04:00.0: setting latency timer to 64 [ 11.269660] iwl3945 0000:04:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels [ 11.269665] iwl3945 0000:04:00.0: Detected Intel Wireless WiFi Link 3945ABG [ 11.269814] iwl3945 0000:04:00.0: irq 45 for MSI/MSI-X [ 11.270224] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270230] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270235] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270239] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270244] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270249] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270264] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270269] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270273] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.270278] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270283] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270288] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270292] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270297] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270302] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270307] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270312] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270322] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270327] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270331] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270337] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.270341] audit: name_count maxed, losing inode data: dev=00:07, inode=9019 [ 11.571818] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.571825] audit: name_count maxed, losing inode data: dev=00:07, inode=9073 [ 11.571828] phy0: Selected rate control algorithm 'iwl-3945-rs' [ 11.571845] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.571851] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571856] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571860] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571865] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571870] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571875] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571879] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.571885] audit: name_count maxed, losing inode data: dev=00:07, inode=9075 [ 11.572073] audit: name_count maxed, losing inode data: dev=00:07, inode=9001 [ 11.572084] audit: name_count maxed, losing inode data: dev=00:07, inode=9084 [ 11.572089] audit: name_count maxed, losing inode data: dev=00:07, inode=9084 [ 11.572094] audit: name_count maxed, losing inode data: dev=00:07, inode=9084 [ 11.572098] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572103] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572108] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572112] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572117] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572122] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572127] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572131] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572137] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572142] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572147] audit: name_count maxed, losing inode data: dev=00:07, inode=9085 [ 11.572151] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572156] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572161] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572168] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572173] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572178] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572183] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572188] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572197] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572201] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572206] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572211] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572216] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572220] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572225] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572230] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572235] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572240] audit: name_count maxed, losing inode data: dev=00:07, inode=9087 [ 11.572244] audit: name_count maxed, losing inode data: dev=00:07, inode=9086 [ 11.713811] cfg80211: World regulatory domain updated: [ 11.713815] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 11.713819] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.713823] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.713827] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 11.713830] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 11.713834] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.027758] cfg80211: Calling CRDA for country: CA [ 12.035144] cfg80211: Regulatory domain changed to country: CA [ 12.035147] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.035151] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 12.035155] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 12.035159] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.035163] (5490000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.035166] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 13.737822] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 14.008874] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 14.073074] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 14.842342] Adding 4128764k swap on /dev/mapper/vg_laptop-lv_swap. Priority:-1 extents:1 across:4128764k [ 15.332146] readahead-disable-service: delaying service auditd [ 19.567099] NET: Registered protocol family 10 [ 19.567362] lo: Disabled Privacy Extensions [ 22.311954] iwl3945 0000:04:00.0: loaded firmware version 15.32.2.9 [ 22.385869] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 22.415053] r8169 0000:05:00.0: eth0: link down [ 22.415403] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 22.435242] RPC: Registered udp transport module. [ 22.435246] RPC: Registered tcp transport module. [ 22.435248] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 25.549545] vboxdrv: Found 2 processor cores. [ 25.549731] vboxdrv: fAsync=0 offMin=0x3c2 offMax=0xe1e [ 25.549795] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 25.549798] vboxdrv: Successfully loaded version 4.0.4 (interface 0x00160000). [ 37.684297] type=1305 audit(1302062289.848:27186): auid=4294967295 ses=4294967295 op="remove rule" key=(null) list=4 res=1 [ 37.684307] type=1305 audit(1302062289.848:27187): audit_enabled=0 old=1 auid=4294967295 ses=4294967295 res=1 [ 39.087158] readahead-collector: starting delayed service auditd [ 40.019648] readahead-collector: sorting [ 40.197118] readahead-collector: finished [ 52.802028] fuse init (API version 7.14) [ 72.880694] wlan0: deauthenticating from 00:13:46:f7:47:a4 by local choice (reason=3) [ 72.923622] wlan0: authenticate with 00:13:46:f7:47:a4 (try 1) [ 72.925379] wlan0: authenticated [ 72.925999] wlan0: associate with 00:13:46:f7:47:a4 (try 1) [ 72.929519] wlan0: RX AssocResp from 00:13:46:f7:47:a4 (capab=0x431 status=0 aid=1) [ 72.929528] wlan0: associated [ 72.932188] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 72.932266] cfg80211: Calling CRDA for country: US [ 72.938037] cfg80211: Regulatory domain changed to country: US [ 72.938041] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 72.938046] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 72.938049] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 72.938053] (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 72.938057] (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 72.938060] (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 72.938064] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 73.470163] padlock: VIA PadLock not detected. [ 83.746052] wlan0: no IPv6 routers present [ 281.749320] * Hello Agere Driver ** [ 281.749720] usbcore: registered new interface driver agr12dec2006 [ 284.773421] Loading module Agere Modem Controller driver version 2.1.80 (2007-10-01) [ 284.773428] Disabling lock debugging due to kernel taint [ 284.776871] serial8250_register_ports: BaseAddress 0x0004 Irq 44 [ 284.776878] ttyAGS3 at I/O 0x4 (irq = 44) is a AgereModem [ 284.777633] agrserial - ret_val 0, call: lt_modem_ops.init_modem [ 284.777639] Loading module Agere Modem Interface driver version 2.1.80.0 (2007-10-01) [ 284.788425] ==> codecType = 0x32 [ 284.788450] BUG: unable to handle kernel NULL pointer dereference at 00000037 [ 284.788456] IP: [<f9805652>] findHDACodec+0x18/0x43 [agrmodem] [ 284.788508] *pde = 00000000 [ 284.788511] Oops: 0000 [#1] SMP [ 284.788515] last sysfs file: /sys/devices/virtual/tty/ttyAGS3/uevent [ 284.788520] Modules linked in: agrserial agrmodem aes_i586 aes_generic fuse vboxnetadp vboxnetflt vboxdrv sunrpc ipv6 cpufreq_ondemand acpi_cpufreq mperf uinput arc4 ecb snd_hda_codec_realtek iwl3945 iwlcore snd_hda_intel mac80211 snd_hda_codec snd_hwdep cfg80211 snd_seq snd_seq_device snd_pcm snd_timer snd rfkill soundcore uvcvideo tifm_7xx1 tifm_core iTCO_wdt videodev iTCO_vendor_support snd_page_alloc i2c_i801 r8169 mii serio_raw joydev microcode sdhci_pci sdhci firewire_ohci firewire_core mmc_core crc_itu_t yenta_socket usb_storage i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: scsi_wait_scan] [ 284.788579] [ 284.788583] Pid: 2859, comm: wvdialconf Tainted: P 2.6.35.11-83.fc14.i686 #1 ISRAE/Satellite P200 [ 284.788588] EIP: 0060:[<f9805652>] EFLAGS: 00010246 CPU: 1 [ 284.788631] EIP is at findHDACodec+0x18/0x43 [agrmodem] [ 284.788635] EAX: f5f3da00 EBX: f84320c4 ECX: 00000003 EDX: 00000000 [ 284.788638] ESI: f84320c4 EDI: f8432028 EBP: f3305cc8 ESP: f3305cc8 [ 284.788641] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [ 284.788645] Process wvdialconf (pid: 2859, ti=f3304000 task=f3cc9940 task.ti=f3304000) [ 284.788648] Stack: [ 284.788650] f3305cd0 f980568a f3305cf0 f97f04e9 f843c5e9 f843c5ea f3305cf0 c07a60b3 [ 284.788657] <0> f981e95b f3305d3f f3305d60 f97d9771 f84320c4 f842e048 00000008 00000001 [ 284.788665] <0> f843239c 00000004 f3305d98 c04ad4e9 c09fee00 00000000 00000041 f3305d30 [ 284.788673] Call Trace: [ 284.788719] [<f980568a>] ? azlGetResourceInformation+0xd/0x14 [agrmodem] [ 284.788772] [<f97f04e9>] ? CAzlIntelInit+0x2d/0x3c4 [agrmodem] [ 284.788789] [<c07a60b3>] ? printk+0x25/0x2a [ 284.788847] [<f97d9771>] ? LXHardwareStart+0x11de/0x13fb [agrmodem] [ 284.788863] [<c04ad4e9>] ? __alloc_pages_nodemask+0x10a/0x5ad [ 284.788868] [<c045e36d>] ? __raw_local_irq_save+0x19/0x1e [ 284.788927] [<f97d4f28>] ? linux_modem_open+0x45/0x10e [agrmodem] [ 284.788939] [<c04443d5>] ? mod_timer+0x70/0x78 [ 284.788976] [<f972e1a1>] ? modemPortOpen+0xd/0x17 [agrmodem] [ 284.788982] [<f8445bb0>] ? serial8250_startup+0x7c/0x2ac [agrserial] [ 284.788986] [<c04ad9b0>] ? __get_free_pages+0x24/0x26 [ 284.788992] [<c0648e17>] ? uart_startup+0x7b/0x102 [ 284.788996] [<c0649425>] ? uart_open+0x133/0x329 [ 284.789002] [<c06290c2>] ? tty_ldisc_setup+0x5d/0x66 [ 284.789007] [<c07a7964>] ? _raw_spin_lock+0xd/0xf [ 284.789011] [<c0622121>] ? check_tty_count+0x3a/0x93 [ 284.789015] [<c0624401>] ? tty_open+0x2f8/0x45b [ 284.789022] [<c04ddd05>] ? chrdev_open+0xe9/0x10d [ 284.789027] [<c04d9a85>] ? __dentry_open+0x132/0x21f [ 284.789031] [<c04da789>] ? nameidata_to_filp+0x31/0x45 [ 284.789035] [<c04ddc1c>] ? chrdev_open+0x0/0x10d [ 284.789041] [<c04e46ad>] ? do_last+0x3a4/0x4b7 [ 284.789045] [<c04e4b52>] ? do_filp_open+0x392/0x41f [ 284.789052] [<c042a29e>] ? need_resched+0x19/0x23 [ 284.789056] [<c042a2b5>] ? should_resched+0xd/0x28 [ 284.789062] [<c05b6ea8>] ? might_fault+0x1e/0x20 [ 284.789066] [<c04da7ea>] ? do_sys_open+0x4d/0xe4 [ 284.789070] [<c04da8a4>] ? sys_open+0x23/0x2b [ 284.789074] [<c07a7d5c>] ? syscall_call+0x7/0xb [ 284.789077] Code: fe 83 c4 24 81 fb a0 01 00 00 75 cc 8d 65 f8 5b 5e 5d c3 55 89 e5 0f 1f 44 00 00 a1 d8 4e 5d f8 31 d2 8b 80 68 01 00 00 8b 48 74 <8b> 44 91 34 85 c0 74 1f 66 81 78 1a c1 11 75 0d a3 6c 79 83 f9 [ 284.789121] EIP: [<f9805652>] findHDACodec+0x18/0x43 [agrmodem] SS:ESP 0068:f3305cc8 [ 284.789167] CR2: 0000000000000037 [ 284.789181] ---[ end trace 8ca6a9e4eb39a82f ]--- Module Size Used by agrserial 9160 3 agrmodem 1248065 1 aes_i586 7138 2 aes_generic 26460 1 aes_i586 fuse 51648 5 vboxnetadp 5950 0 vboxnetflt 16051 0 vboxdrv 173274 2 vboxnetadp,vboxnetflt sunrpc 165546 1 ipv6 229581 32 cpufreq_ondemand 7262 2 acpi_cpufreq 6285 0 mperf 1141 1 acpi_cpufreq uinput 5228 0 arc4 1085 2 ecb 1595 2 snd_hda_codec_realtek 210808 1 iwl3945 97265 0 iwlcore 160590 1 iwl3945 snd_hda_intel 20151 2 mac80211 188716 2 iwl3945,iwlcore snd_hda_codec 71701 3 agrmodem,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 4795 1 snd_hda_codec cfg80211 110951 3 iwl3945,iwlcore,mac80211 snd_seq 43435 0 snd_seq_device 5056 1 snd_seq snd_pcm 61769 2 snd_hda_intel,snd_hda_codec snd_timer 15435 2 snd_seq,snd_pcm snd 47365 13 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer rfkill 13652 2 cfg80211 soundcore 5088 1 snd uvcvideo 49189 0 tifm_7xx1 4585 0 tifm_core 4953 1 tifm_7xx1 iTCO_wdt 8960 0 videodev 60378 1 uvcvideo iTCO_vendor_support 2070 1 iTCO_wdt snd_page_alloc 6180 2 snd_hda_intel,snd_pcm i2c_i801 9016 0 r8169 31809 0 mii 3578 1 r8169 serio_raw 3589 0 joydev 7306 0 microcode 11067 0 sdhci_pci 6246 0 sdhci 15685 1 sdhci_pci firewire_ohci 17697 0 firewire_core 37873 1 firewire_ohci mmc_core 53194 1 sdhci crc_itu_t 1235 1 firewire_core yenta_socket 20882 0 usb_storage 35567 1 i915 242080 4 drm_kms_helper 22278 1 i915 drm 139248 4 i915,drm_kms_helper i2c_algo_bit 4197 1 i915 i2c_core 21445 6 videodev,i2c_i801,i915,drm_kms_helper,drm,i2c_algo_bit video 17730 1 i915 output 1625 1 video
FATAL: Module agrserial is in use. FATAL: Module agrmodem is in use. Loading drivers: Drivers loaded: agrserial 9160 2 agrmodem 1248065 1 snd_hda_codec 71701 3 agrmodem,snd_hda_codec_realtek,snd_hda_intel snd 47365 13 agrmodem,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq,snd_seq_device,snd_pcm,snd_timer and symbolic link created: lrwxrwxrwx 1 root root 12 Apr 5 23:02 /dev/ttySAGR -> /dev/ttyAGS3 Checking for utility wvdialconf Found /usr/bin/wvdialconf, preparing to run: wvdialconf /etc/wvdial.conf Modem Port Scan<*1>: S0 S1 S2 S3
