Dear Sir(s)
I am still having modem troubles. I have attached some files to try to
show you what is happening.
I used the ModemHowTo help at Ubuntu.com and followed all the
instructions amongst other things.
I have installed Gnome PPP but it has never seen the modem at all even
when I manually altered the config file as detailed in the Modem how to
help.
I also use the pon poff and plog commands; after configuring it; It
worked only once
I installed minicom and configured it; it never worked!
It seems as if wvdial is the only one that can see the Modem and then
something is stopping it completing the connection. I did try a comma in
the tel. No but it made no difference. Wvdial did also connect once only
Could you advise me any further please?
I would appreciate any help you can offer. Also thank you for your help
so far, it is wonderful there are people like yourselves 'out there'
somewhere.
Regards, John
CPU0
0: 47 IO-APIC-edge timer
1: 244 IO-APIC-edge i8042
4: 2 IO-APIC-edge
6: 5 IO-APIC-edge floppy
7: 1 IO-APIC-edge parport0
8: 0 IO-APIC-edge rtc0
9: 0 IO-APIC-fasteoi acpi
14: 14461 IO-APIC-edge pata_via
15: 3429 IO-APIC-edge pata_via
16: 1237 IO-APIC-fasteoi radeon
17: 0 IO-APIC-fasteoi skge@pci:0000:00:0a.0
20: 0 IO-APIC-fasteoi sata_via
21: 2154 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5
22: 99 IO-APIC-fasteoi VIA8237
NMI: 0 Non-maskable interrupts
LOC: 16034 Local timer interrupts
SPU: 0 Spurious interrupts
PMI: 0 Performance monitoring interrupts
PND: 0 Performance pending work
RES: 0 Rescheduling interrupts
CAL: 0 Function call interrupts
TLB: 0 TLB shootdowns
TRM: 0 Thermal event interrupts
THR: 0 Threshold APIC interrupts
MCE: 0 Machine check exceptions
MCP: 1 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 (Ubuntu 2.6.32-28.55-generic 2.6.32.27+drm33.12)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000005ff30000 (usable)
[ 0.000000] BIOS-e820: 000000005ff30000 - 000000005ff40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x5ff30 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 base 00F8000000 mask FFFC000000 write-combining
[ 0.000000] 2 base 0040000000 mask FFE0000000 write-back
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000005ff30000 (usable)
[ 0.000000] modified: 000000005ff30000 - 000000005ff40000 (ACPI data)
[ 0.000000] modified: 000000005ff40000 - 000000005fff0000 (ACPI NVS)
[ 0.000000] modified: 000000005fff0000 - 0000000060000000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37857000 - 37fefa72
[ 0.000000] Allocated new RAMDISK: 008e5000 - 0107da72
[ 0.000000] Move RAMDISK from 0000000037857000 - 0000000037fefa71 to 008e5000 - 0107da71
[ 0.000000] ACPI: RSDP 000faa90 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 5ff30000 00030 (v01 A M I OEMRSDT 01000514 MSFT 00000097)
[ 0.000000] ACPI: FACP 5ff30200 00081 (v01 A M I OEMFACP 01000514 MSFT 00000097)
[ 0.000000] ACPI: DSDT 5ff303e0 0362A (v01 A0091 A0091006 00000006 MSFT 0100000D)
[ 0.000000] ACPI: FACS 5ff40000 00040
[ 0.000000] ACPI: APIC 5ff30390 0004A (v01 A M I OEMAPIC 01000514 MSFT 00000097)
[ 0.000000] ACPI: OEMB 5ff40040 0003F (v01 A M I OEMBIOS 01000514 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 647MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008e0ed8] TEXT DATA BSS ==> [0000100000 - 00008e0ed8]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008e1000 - 00008e4204] BRK ==> [00008e1000 - 00008e4204]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008e5000 - 000107da72] NEW RAMDISK ==> [00008e5000 - 000107da72]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0005ff30
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0005ff30
[ 0.000000] On node 0 totalpages: 392895
[ 0.000000] free_area_init_node: node 0, pgdat c079c8c0, node_mem_map c107f200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1295 pages used for memmap
[ 0.000000] HighMem zone: 164387 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:9ff80000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2000000 s36056 r0 d21288 u4194304
[ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389824
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=100942d5-035f-4e34-80a7-2efbd2593264 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 7859840 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0005ff30)
[ 0.000000] Memory: 1533884k/1572032k available (4685k kernel code, 36732k reserved, 2125k data, 660k init, 662728k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a7000 - 0xc084c000 ( 660 kB)
[ 0.000000] .data : 0xc05936e7 - 0xc07a6e88 (2125 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05936e7 (4685 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2202.559 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 4405.11 BogoMIPS (lpj=8810236)
[ 0.004030] Security Framework initialized
[ 0.004066] AppArmor: AppArmor initialized
[ 0.004074] Mount-cache hash table entries: 512
[ 0.004219] Initializing cgroup subsys ns
[ 0.004223] Initializing cgroup subsys cpuacct
[ 0.004228] Initializing cgroup subsys memory
[ 0.004238] Initializing cgroup subsys devices
[ 0.004241] Initializing cgroup subsys freezer
[ 0.004244] Initializing cgroup subsys net_cls
[ 0.004267] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004270] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004275] mce: CPU supports 5 MCE banks
[ 0.004298] Performance Events: AMD PMU driver.
[ 0.004304] ... version: 0
[ 0.004306] ... bit width: 48
[ 0.004308] ... generic registers: 4
[ 0.004311] ... value mask: 0000ffffffffffff
[ 0.004313] ... max period: 00007fffffffffff
[ 0.004315] ... fixed-purpose events: 0
[ 0.004317] ... event mask: 000000000000000f
[ 0.004323] Checking 'hlt' instruction... OK.
[ 0.020794] SMP alternatives: switching to UP code
[ 0.026695] Freeing SMP alternatives: 19k freed
[ 0.026720] ACPI: Core revision 20090903
[ 0.032014] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.032022] ftrace: allocating 21796 entries in 43 pages
[ 0.036133] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.036948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.077698] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 00
[ 0.080001] Brought up 1 CPUs
[ 0.080001] Total of 1 processors activated (4405.11 BogoMIPS).
[ 0.080001] CPU0 attaching NULL sched-domain.
[ 0.080001] devtmpfs: initialized
[ 0.080001] regulator: core version 0.5
[ 0.080001] Time: 17:32:47 Date: 02/14/11
[ 0.080001] NET: Registered protocol family 16
[ 0.080001] EISA bus registered
[ 0.080001] ACPI: bus type pci registered
[ 0.080001] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[ 0.080001] PCI: Using configuration type 1 for base access
[ 0.080001] bio: create slab <bio-0> at 0
[ 0.080001] ACPI: EC: Look up EC in DSDT
[ 0.080866] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.083720] ACPI: Interpreter enabled
[ 0.083723] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.083743] ACPI: Using IOAPIC for interrupt routing
[ 0.088627] ACPI: No dock devices found.
[ 0.088736] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.088783] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
[ 0.088869] pci 0000:00:01.0: supports D1
[ 0.088910] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfdb00000-0xfdb03fff]
[ 0.088916] pci 0000:00:0a.0: reg 14 io port: [0xdc00-0xdcff]
[ 0.088935] pci 0000:00:0a.0: reg 30 32bit mmio pref: [0xfda00000-0xfda1ffff]
[ 0.088954] pci 0000:00:0a.0: supports D1 D2
[ 0.088956] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.088960] pci 0000:00:0a.0: PME# disabled
[ 0.088992] pci 0000:00:0e.0: reg 10 32bit mmio: [0xfde00000-0xfde000ff]
[ 0.088998] pci 0000:00:0e.0: reg 14 io port: [0xb000-0xb007]
[ 0.089004] pci 0000:00:0e.0: reg 18 io port: [0xec00-0xecff]
[ 0.089032] pci 0000:00:0e.0: supports D2
[ 0.089035] pci 0000:00:0e.0: PME# supported from D2 D3hot
[ 0.089038] pci 0000:00:0e.0: PME# disabled
[ 0.089067] pci 0000:00:0f.0: reg 10 io port: [0xe800-0xe807]
[ 0.089073] pci 0000:00:0f.0: reg 14 io port: [0xe400-0xe403]
[ 0.089079] pci 0000:00:0f.0: reg 18 io port: [0xe000-0xe007]
[ 0.089084] pci 0000:00:0f.0: reg 1c io port: [0xd800-0xd803]
[ 0.089090] pci 0000:00:0f.0: reg 20 io port: [0xd400-0xd40f]
[ 0.089096] pci 0000:00:0f.0: reg 24 io port: [0xd000-0xd0ff]
[ 0.089156] pci 0000:00:0f.1: reg 20 io port: [0xfc00-0xfc0f]
[ 0.089225] pci 0000:00:10.0: reg 20 io port: [0xb400-0xb41f]
[ 0.089246] pci 0000:00:10.0: supports D1 D2
[ 0.089249] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089252] pci 0000:00:10.0: PME# disabled
[ 0.089292] pci 0000:00:10.1: reg 20 io port: [0xb800-0xb81f]
[ 0.089313] pci 0000:00:10.1: supports D1 D2
[ 0.089315] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089319] pci 0000:00:10.1: PME# disabled
[ 0.089359] pci 0000:00:10.2: reg 20 io port: [0xc000-0xc01f]
[ 0.089380] pci 0000:00:10.2: supports D1 D2
[ 0.089382] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089386] pci 0000:00:10.2: PME# disabled
[ 0.089425] pci 0000:00:10.3: reg 20 io port: [0xc400-0xc41f]
[ 0.089446] pci 0000:00:10.3: supports D1 D2
[ 0.089448] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089452] pci 0000:00:10.3: PME# disabled
[ 0.089479] pci 0000:00:10.4: reg 10 32bit mmio: [0xfdf00000-0xfdf000ff]
[ 0.089513] pci 0000:00:10.4: supports D1 D2
[ 0.089515] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.089519] pci 0000:00:10.4: PME# disabled
[ 0.089571] HPET not enabled in BIOS. You might try hpet=force boot option
[ 0.089577] pci 0000:00:11.0: Enabled onboard AC97/MC97 devices
[ 0.089622] pci 0000:00:11.5: reg 10 io port: [0xc800-0xc8ff]
[ 0.089658] pci 0000:00:11.5: supports D1 D2
[ 0.089687] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
[ 0.089809] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.089813] pci 0000:01:00.0: reg 14 io port: [0xa000-0xa0ff]
[ 0.089817] pci 0000:01:00.0: reg 18 32bit mmio: [0xfd600000-0xfd60ffff]
[ 0.089827] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfd500000-0xfd51ffff]
[ 0.089839] pci 0000:01:00.0: supports D1 D2
[ 0.089856] pci 0000:01:00.1: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.089860] pci 0000:01:00.1: reg 14 32bit mmio: [0xfd400000-0xfd40ffff]
[ 0.089877] pci 0000:01:00.1: supports D1 D2
[ 0.089901] pci 0000:00:01.0: bridge io port: [0xa000-0xafff]
[ 0.089905] pci 0000:00:01.0: bridge 32bit mmio: [0xfd100000-0xfd6fffff]
[ 0.089909] pci 0000:00:01.0: bridge 32bit mmio pref: [0xb7f00000-0xf7efffff]
[ 0.089916] pci_bus 0000:00: on NUMA node 0
[ 0.089919] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.094676] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 14 15)
[ 0.094754] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
[ 0.094830] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 14 15)
[ 0.094905] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 14 15)
[ 0.094981] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.095058] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.095134] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.095211] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
[ 0.095307] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.095309] vgaarb: loaded
[ 0.095428] SCSI subsystem initialized
[ 0.095500] libata version 3.00 loaded.
[ 0.095575] usbcore: registered new interface driver usbfs
[ 0.095587] usbcore: registered new interface driver hub
[ 0.095612] usbcore: registered new device driver usb
[ 0.095729] ACPI: WMI: Mapper loaded
[ 0.095731] PCI: Using ACPI for IRQ routing
[ 0.095878] NetLabel: Initializing
[ 0.095880] NetLabel: domain hash size = 128
[ 0.095882] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.095896] NetLabel: unlabeled traffic allowed by default
[ 0.095942] Switching to clocksource tsc
[ 0.095995] AppArmor: AppArmor Filesystem Enabled
[ 0.095995] pnp: PnP ACPI init
[ 0.095995] ACPI: bus type pnp registered
[ 0.095995] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.096768] pnp: PnP ACPI: found 12 devices
[ 0.096770] ACPI: ACPI bus type pnp unregistered
[ 0.096773] PnPBIOS: Disabled by ACPI PNP
[ 0.096788] system 00:08: ioport range 0x295-0x296 has been reserved
[ 0.096791] system 00:08: ioport range 0x3e1-0x3e7 has been reserved
[ 0.096794] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
[ 0.096797] system 00:08: ioport range 0x800-0x87f has been reserved
[ 0.096800] system 00:08: ioport range 0x400-0x41f has been reserved
[ 0.096806] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.096810] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.096813] system 00:09: iomem range 0xfff80000-0xffffffff has been reserved
[ 0.096818] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.096821] system 00:0b: iomem range 0xc0000-0xdffff could not be reserved
[ 0.096824] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 0.096827] system 00:0b: iomem range 0x100000-0x5ffeffff could not be reserved
[ 0.131508] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.131512] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.131517] pci 0000:00:01.0: MEM window: 0xfd100000-0xfd6fffff
[ 0.131521] pci 0000:00:01.0: PREFETCH window: 0xb7f00000-0xf7efffff
[ 0.131536] pci 0000:00:01.0: setting latency timer to 64
[ 0.131542] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.131545] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.131548] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.131551] pci_bus 0000:01: resource 1 mem: [0xfd100000-0xfd6fffff]
[ 0.131554] pci_bus 0000:01: resource 2 pref mem [0xb7f00000-0xf7efffff]
[ 0.131593] NET: Registered protocol family 2
[ 0.131687] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.132131] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.133309] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.133965] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.133968] TCP reno registered
[ 0.134069] NET: Registered protocol family 1
[ 0.134088] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.134175] pci 0000:01:00.0: Boot video device
[ 0.134389] cpufreq-nforce2: No nForce2 chipset.
[ 0.134415] Scanning for low memory corruption every 60 seconds
[ 0.134523] audit: initializing netlink socket (disabled)
[ 0.134541] type=2000 audit(1297704767.132:1): initialized
[ 0.143776] Trying to unpack rootfs image as initramfs...
[ 0.156404] highmem bounce pool size: 64 pages
[ 0.156411] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.157926] VFS: Disk quotas dquot_6.5.2
[ 0.157989] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.158567] fuse init (API version 7.13)
[ 0.158651] msgmni has been set to 1703
[ 0.164496] alg: No test for stdrng (krng)
[ 0.164591] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.164595] io scheduler noop registered
[ 0.164598] io scheduler anticipatory registered
[ 0.164600] io scheduler deadline registered
[ 0.164641] io scheduler cfq registered (default)
[ 0.164755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.164775] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.164868] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.164878] ACPI: Power Button [PWRB]
[ 0.164922] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.164927] ACPI: Sleep Button [SLPB]
[ 0.164968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.164971] ACPI: Power Button [PWRF]
[ 0.165127] processor LNXCPU:00: registered as cooling_device0
[ 0.167990] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.168103] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.168412] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.169398] brd: module loaded
[ 0.169869] loop: module loaded
[ 0.169950] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.170094] alloc irq_desc for 20 on node -1
[ 0.170096] alloc kstat_irqs on node -1
[ 0.170104] pata_acpi 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.170170] pata_acpi 0000:00:0f.1: PCI INT A disabled
[ 0.170444] Fixed MDIO Bus: probed
[ 0.170480] PPP generic driver version 2.4.2
[ 0.170516] tun: Universal TUN/TAP device driver, 1.6
[ 0.170518] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.170585] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.170601] alloc irq_desc for 21 on node -1
[ 0.170602] alloc kstat_irqs on node -1
[ 0.170606] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 0.170624] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.170654] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 0.170721] ehci_hcd 0000:00:10.4: irq 21, io mem 0xfdf00000
[ 0.170781] isapnp: Scanning for PnP cards...
[ 0.180077] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 0.180220] usb usb1: configuration #1 chosen from 1 choice
[ 0.180250] hub 1-0:1.0: USB hub found
[ 0.180262] hub 1-0:1.0: 8 ports detected
[ 0.180324] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.180341] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.180394] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.180403] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.180438] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 0.180463] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000b400
[ 0.180554] usb usb2: configuration #1 chosen from 1 choice
[ 0.180576] hub 2-0:1.0: USB hub found
[ 0.180584] hub 2-0:1.0: 2 ports detected
[ 0.180622] uhci_hcd 0000:00:10.1: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 0.180627] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.180661] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 0.180679] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000b800
[ 0.180760] usb usb3: configuration #1 chosen from 1 choice
[ 0.180781] hub 3-0:1.0: USB hub found
[ 0.180789] hub 3-0:1.0: 2 ports detected
[ 0.180825] uhci_hcd 0000:00:10.2: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.180834] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.180867] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 0.180885] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000c000
[ 0.180983] usb usb4: configuration #1 chosen from 1 choice
[ 0.181005] hub 4-0:1.0: USB hub found
[ 0.181012] hub 4-0:1.0: 2 ports detected
[ 0.181051] uhci_hcd 0000:00:10.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.181057] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.181087] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 0.181105] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000c400
[ 0.181187] usb usb5: configuration #1 chosen from 1 choice
[ 0.181209] hub 5-0:1.0: USB hub found
[ 0.181216] hub 5-0:1.0: 2 ports detected
[ 0.181293] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.181296] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.181476] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.181575] mice: PS/2 mouse device common for all mice
[ 0.181705] rtc_cmos 00:02: RTC can wake from S4
[ 0.181753] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.181803] rtc0: alarms up to one year, y3k, 114 bytes nvram
[ 0.181909] device-mapper: uevent: version 1.0.3
[ 0.227982] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.232379] device-mapper: multipath: version 1.1.0 loaded
[ 0.232384] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.232592] EISA: Probing bus 0 at eisa.0
[ 0.232600] Cannot allocate resource for EISA slot 1
[ 0.232626] EISA: Detected 0 cards.
[ 0.232682] cpuidle: using governor ladder
[ 0.232684] cpuidle: using governor menu
[ 0.233055] TCP cubic registered
[ 0.233203] NET: Registered protocol family 10
[ 0.233607] lo: Disabled Privacy Extensions
[ 0.233885] NET: Registered protocol family 17
[ 0.233920] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3200+ processors (1 cpu cores) (version 2.20.00)
[ 0.235673] [Firmware Bug]: powernow-k8: No PSB or ACPI _PSS objects
[ 0.235699] Using IPI No-Shortcut mode
[ 0.235797] PM: Resume from disk failed.
[ 0.235813] registered taskstats version 1
[ 0.236116] Magic number: 15:307:542
[ 0.236226] rtc_cmos 00:02: setting system clock to 2011-02-14 17:32:47 UTC (1297704767)
[ 0.236229] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.236231] EDD information not available.
[ 0.248305] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.593747] Freeing initrd memory: 7778k freed
[ 0.733332] isapnp: No Plug & Play device found
[ 0.733346] Freeing unused kernel memory: 660k freed
[ 0.734299] Write protecting the kernel text: 4688k
[ 0.734327] Write protecting the kernel read-only data: 1844k
[ 0.754657] udev: starting version 151
[ 0.800218] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 0.916353] sata_via 0000:00:0f.0: version 2.4
[ 0.916373] sata_via 0000:00:0f.0: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 0.916420] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 0.946548] scsi0 : sata_via
[ 0.952495] scsi1 : sata_via
[ 0.952566] ata1: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 20
[ 0.952570] ata2: SATA max UDMA/133 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 20
[ 0.952633] pata_via 0000:00:0f.1: version 0.3.4
[ 0.952648] pata_via 0000:00:0f.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.953200] scsi2 : pata_via
[ 0.953322] Floppy drive(s): fd0 is 1.44M
[ 0.954244] scsi3 : pata_via
[ 0.955940] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[ 0.955943] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[ 0.956056] alloc irq_desc for 17 on node -1
[ 0.956059] alloc kstat_irqs on node -1
[ 0.956066] skge 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.956077] skge 0000:00:0a.0: PCI: Disallowing DAC for device
[ 0.956113] skge 1.13 addr 0xfdb00000 irq 17 chip Yukon-Lite rev 9
[ 0.956811] skge eth0: addr 00:11:d8:db:16:54
[ 0.972087] FDC 0 is a post-1991 82077
[ 0.977785] usb 3-2: configuration #1 chosen from 1 choice
[ 1.160013] ata1: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.300565] ata3.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 1.300568] ata3.00: 156301488 sectors, multi 16: LBA48
[ 1.301597] ata3.01: ATA-6: WDC WD800JB-00FSA0, 77.07W77, max UDMA/100
[ 1.301600] ata3.01: 156301488 sectors, multi 16: LBA48
[ 1.316425] ata3.00: configured for UDMA/100
[ 1.333209] ata3.01: configured for UDMA/100
[ 1.372011] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 1.382732] scsi 2:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 1.382894] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.383119] sd 2:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.383160] sd 2:0:0:0: [sda] Write Protect is off
[ 1.383163] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.383183] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.383305] sda: sda1 sda2 <
[ 1.404067] scsi 2:0:1:0: Direct-Access ATA WDC WD800JB-00FS 77.0 PQ: 0 ANSI: 5
[ 1.404167] sd 2:0:1:0: Attached scsi generic sg1 type 0
[ 1.423228] sda5 sda6 >
[ 1.434196] sd 2:0:1:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.434380] sd 2:0:1:0: [sdb] Write Protect is off
[ 1.434383] sd 2:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.434560] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.434741] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.434775] sdb: sdb1
[ 1.458124] sd 2:0:1:0: [sdb] Attached SCSI disk
[ 1.568370] ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4167B, DL11, max UDMA/33
[ 1.584248] ata4.00: configured for UDMA/33
[ 1.589864] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4167B DL11 PQ: 0 ANSI: 5
[ 1.602599] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.602604] Uniform CD-ROM driver Revision: 3.20
[ 1.602689] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 1.602748] sr 3:0:0:0: Attached scsi generic sg2 type 5
[ 1.613828] usbcore: registered new interface driver hiddev
[ 1.626962] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:10.1/usb3/3-2/3-2:1.0/input/input5
[ 1.627075] generic-usb 0003:046D:C00F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.1-2/input0
[ 1.627105] usbcore: registered new interface driver usbhid
[ 1.627109] usbhid: v2.6:USB HID core driver
[ 2.308487] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 15.569208] udev: starting version 151
[ 15.622321] Adding 550904k swap on /dev/sda6. Priority:-1 extents:1 across:550904k
[ 15.712057] lp: driver loaded but no devices found
[ 15.751452] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.753793] Linux agpgart interface v0.103
[ 15.865710] agpgart-amd64 0000:00:00.0: AGP bridge [1106/3188]
[ 16.010542] agpgart-amd64 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
[ 16.133348] [drm] Initialized drm 1.1.0 20060810
[ 16.150748] parport_pc 00:07: reported by Plug and Play ACPI
[ 16.150790] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 16.229323] ppdev: user-space parallel port driver
[ 16.236255] lp0: using parport0 (interrupt-driven).
[ 16.337838] [drm] radeon defaulting to kernel modesetting.
[ 16.337843] [drm] radeon kernel modesetting enabled.
[ 16.337905] alloc irq_desc for 16 on node -1
[ 16.337908] alloc kstat_irqs on node -1
[ 16.337917] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.355672] [drm] radeon: Initializing kernel modesetting.
[ 16.357183] [drm] register mmio base: 0xFD600000
[ 16.357187] [drm] register mmio size: 65536
[ 16.358541] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 16.358559] [drm] Generation 2 PCI interface, using max accessible memory
[ 16.358570] agpgart-amd64 0000:00:00.0: AGP 3.5 bridge
[ 16.358586] agpgart-amd64 0000:00:00.0: putting AGP V3 device into 8x mode
[ 16.358647] radeon 0000:01:00.0: putting AGP V3 device into 8x mode
[ 16.358653] [drm] radeon: VRAM 256M
[ 16.358655] [drm] radeon: VRAM from 0x00000000 to 0x0FFFFFFF
[ 16.358657] [drm] radeon: GTT 64M
[ 16.358659] [drm] radeon: GTT from 0xF8000000 to 0xFBFFFFFF
[ 16.358706] [drm] radeon: irq initialized.
[ 16.358874] [drm] Detected VRAM RAM=256M, BAR=256M
[ 16.358880] [drm] RAM width 128bits DDR
[ 16.360564] [TTM] Zone kernel: Available graphics memory: 440290 kiB.
[ 16.360568] [TTM] Zone highmem: Available graphics memory: 771654 kiB.
[ 16.360594] [drm] radeon: 256M of VRAM memory ready
[ 16.360597] [drm] radeon: 64M of GTT memory ready.
[ 16.360830] [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
[ 16.360839] [drm] radeon: cp idle (0x10000C03)
[ 16.360963] [drm] Loading R300 Microcode
[ 16.361327] platform radeon_cp.0: firmware: requesting radeon/R300_cp.bin
[ 16.443395] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 16.443405] alloc irq_desc for 22 on node -1
[ 16.443407] alloc kstat_irqs on node -1
[ 16.443415] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 16.476044] [drm] radeon: ring at 0x00000000F8000000
[ 16.476076] [drm] ring test succeeded in 1 usecs
[ 16.483254] [drm] radeon: ib pool ready.
[ 16.483336] [drm] ib test succeeded in 0 usecs
[ 16.484299] [drm] Default TV standard: PAL
[ 16.484302] [drm] 27.000000000 MHz TV ref clk
[ 16.484306] [drm] DFP table revision: 3
[ 16.485077] [drm] Default TV standard: PAL
[ 16.485080] [drm] 27.000000000 MHz TV ref clk
[ 16.485207] [drm] Radeon Display Connectors
[ 16.485209] [drm] Connector 0:
[ 16.485211] [drm] VGA
[ 16.485214] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 16.485216] [drm] Encoders:
[ 16.485218] [drm] CRT1: INTERNAL_DAC1
[ 16.485220] [drm] Connector 1:
[ 16.485221] [drm] DVI-I
[ 16.485223] [drm] HPD1
[ 16.485225] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 16.485227] [drm] Encoders:
[ 16.485229] [drm] CRT2: INTERNAL_DAC2
[ 16.485231] [drm] DFP1: INTERNAL_TMDS1
[ 16.485232] [drm] Connector 2:
[ 16.485234] [drm] S-video
[ 16.485235] [drm] Encoders:
[ 16.485237] [drm] TV1: INTERNAL_DAC2
[ 16.714003] [drm] fb mappable at 0xE0040000
[ 16.714007] [drm] vram apper at 0xE0000000
[ 16.714009] [drm] size 5242880
[ 16.714011] [drm] fb depth is 24
[ 16.714012] [drm] pitch is 5120
[ 16.716195] fb0: radeondrmfb frame buffer device
[ 16.716198] registered panic notifier
[ 16.716205] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 16.721572] vga16fb: initializing
[ 16.721578] vga16fb: mapped to 0xc00a0000
[ 16.721584] vga16fb: not registering due to another framebuffer present
[ 16.895712] Console: switching to colour frame buffer device 160x64
[ 17.207138] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 17.415207] skge eth0: enabling interface
[ 17.434161] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.579065] type=1505 audit(1297665184.839:2): operation="profile_load" pid=711 name="/usr/share/gdm/guest-session/Xsession"
[ 17.708279] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 17.708297] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
[ 17.708504] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 17.708654] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 17.958474] type=1505 audit(1297665185.219:3): operation="profile_load" pid=788 name="/sbin/dhclient3"
[ 17.958648] type=1505 audit(1297665185.219:4): operation="profile_load" pid=788 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 17.958735] type=1505 audit(1297665185.219:5): operation="profile_load" pid=788 name="/usr/lib/connman/scripts/dhclient-script"
[ 18.232913] codec_read: codec 0 is not valid [0xfe0000]
[ 18.242895] codec_read: codec 0 is not valid [0xfe0000]
[ 18.254794] codec_read: codec 0 is not valid [0xfe0000]
[ 18.270738] codec_read: codec 0 is not valid [0xfe0000]
[ 30.183597] type=1505 audit(1297665197.443:6): operation="profile_load" pid=794 name="/usr/bin/evince"
[ 30.185294] type=1505 audit(1297665197.447:7): operation="profile_load" pid=794 name="/usr/bin/evince-previewer"
[ 30.186470] type=1505 audit(1297665197.447:8): operation="profile_load" pid=794 name="/usr/bin/evince-thumbnailer"
[ 30.614112] type=1505 audit(1297665197.875:9): operation="profile_load" pid=1093 name="/usr/lib/cups/backend/cups-pdf"
[ 30.614425] type=1505 audit(1297665197.875:10): operation="profile_load" pid=1093 name="/usr/sbin/cupsd"
[ 30.700442] type=1505 audit(1297665197.963:11): operation="profile_load" pid=1095 name="/usr/sbin/tcpdump"
Module Size Used by
binfmt_misc 6587 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_via82xx 20058 2
gameport 9089 1 snd_via82xx
snd_mpu401_uart 5617 1 snd_via82xx
snd_via82xx_modem 8486 0
snd_ac97_codec 100646 2 snd_via82xx,snd_via82xx_modem
ac97_bus 1002 1 snd_ac97_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70694 4 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26722 0
snd_seq_midi 4557 0
snd_rawmidi 19056 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
radeon 676897 3
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
ppdev 5259 0
ttm 49943 1 radeon
drm_kms_helper 29329 1 radeon
parport_pc 25962 1
snd 54180 16 snd_via82xx,snd_mpu401_uart,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
drm 162409 5 radeon,ttm,drm_kms_helper
i2c_algo_bit 5028 1 radeon
snd_page_alloc 7076 3 snd_via82xx,snd_via82xx_modem,snd_pcm
i2c_viapro 5573 0
soundcore 6620 1 snd
k8temp 3152 0
amd64_agp 7165 1
shpchp 28835 0
agpgart 31724 3 ttm,drm,amd64_agp
lp 7028 0
parport 32635 3 ppdev,parport_pc,lp
usbhid 36110 0
hid 67064 1 usbhid
floppy 53016 0
pata_via 7272 2
sata_via 7009 0
skge 36428 0
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-28-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-28-generic (buildd@palmer) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011
scanModem update of: 2011_02_04
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://au.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel. For details see http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_via82xx_modem
Attached USB devices are:
ID 046d:c00f Logitech, Inc. MouseMan Traveler/Mobile
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:0e.0 Communication controller: Agere Systems LT WinModem (rev 02)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:0e.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0e.0 11c1:044c 11c1:044c Communication controller: Agere Systems LT WinModem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 00:0e.0 ----
[ 0.088992] pci 0000:00:0e.0: reg 10 32bit mmio: [0xfde00000-0xfde000ff]
[ 0.088998] pci 0000:00:0e.0: reg 14 io port: [0xb000-0xb007]
[ 0.089004] pci 0000:00:0e.0: reg 18 io port: [0xec00-0xecff]
[ 0.089032] pci 0000:00:0e.0: supports D2
[ 0.089035] pci 0000:00:0e.0: PME# supported from D2 D3hot
[ 0.089038] pci 0000:00:0e.0: PME# disabled
The PCI slot 00:0e.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:11.6, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:11.6 1106:3068 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Modem interrupt assignment and sharing:
22: 99 IO-APIC-fasteoi VIA8237
--- Bootup diagnostics for card in PCI slot 00:11.6 ----
[ 0.089687] pci 0000:00:11.6: reg 10 io port: [0x00-0xff]
[ 0.095995] pnp 00:08: io resource (0x10-0x1f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x22-0x3f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x44-0x5f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x62-0x63) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x65-0x6f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x72-0x7f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x80-0x80) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x84-0x86) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x88-0x88) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x8c-0x8e) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0x90-0x9f) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0xa2-0xbf) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 0.095995] pnp 00:08: io resource (0xe0-0xef) overlaps 0000:00:11.6 BAR 0 (0x0-0xff), disabling
[ 16.443395] VIA 82xx Modem 0000:00:11.6: enabling device (0000 -> 0001)
[ 16.443415] VIA 82xx Modem 0000:00:11.6: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 17.207138] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 17.708279] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 17.708297] VIA 82xx Modem: probe of 0000:00:11.6 failed with error -13
The PCI slot 00:11.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
PCIbus=00:11.6
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller (rev 80)
Flags: medium devsel, IRQ 22
I/O ports at 1000 [size=256]
Capabilities: [d0] Power Management version 2
Kernel modules: snd-via82xx-modem
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: VIA 8237 : VIA 8237 : playback 4 : capture 1
00-01: VIA 8237 : VIA 8237 : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [V8237 ]: VIA8237 - VIA 8237
VIA 8237 with AD1980 at 0xc800, irq 22
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:0e.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems LT WinModem "
CLASS=0780
PCIDEV=11c1:044c
SUBSYS=11c1:044c
IRQ=3
IDENT=Agere.DSP
For candidate modem in: 00:0e.0
0780 Communication controller: Agere Systems LT WinModem
Primary device ID: 11c1:044c
Support type needed or chipset: Agere.DSP
Predictive diagnostics for card in bus 00:11.6:
Modem chipset detected on
NAME="Communication controller: VIA Technologies, Inc. AC'97 Modem Controller "
CLASS=0780
PCIDEV=1106:3068
SUBSYS=none
IRQ=22
SOFT=1106:3068.MC97
CodecArchived=AGR02_possibly
IDENT=slmodemd
SLMODEMD_DEVICE=modem:1
Driver=snd-via82xx-modem
For candidate modem in: 00:11.6
0780 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
Primary device ID: 1106:3068
Subsystem PCI_id none
Softmodem codec or chipset from diagnostics:
from Archives: AGR02_possibly
Support type needed or chipset: slmodemd
An ALSA (Advanced Linux Sound Architecture) modem driver: snd-via82xx-modem
provides Low Level support enabling contact with the modem hardware.
For all BUT Conexant chip soft modems (using hsfmodem software)
complementary High Level support is through a Smartlink utility: slmodemd
Download from http://linmodems.technion.ac.il/packages/smartlink/
the package SLMODEMD_gcc4.4_alsa1.0.21.tar.gz having a compiled slmodemd. Unpack under Linux with:
$ tar zxf SLMODEMD_gcc4.4_alsa1.0.21.tar.gz
and read instructions therein. But briefly, the modem is setup with command:
sudo slmodemd -c YOUR_COUNTRY --alsa modem:1
reporting dynamic creation of ports:
/dev/ttySL0 --> /dev/pts/N , with N some number
Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through guidance.
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
The patch utility is needed for compiling ALSA drivers, and possibly others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-28-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273312 2010-03-07 14:59 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
Just after start up
====================
jonathan@jonathan-desktop:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:11:d8:db:16:54
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)
jonathan@jonathan-desktop:~$ sudo ifconfig eth0 down
[sudo] password for jonathan:
Removed eth0 as I read somewhere it might interfere with modem responses!
==========================================
jonathan@jonathan-desktop:~$ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:8 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:480 (480.0 B) TX bytes:480 (480.0 B)
jonathan@jonathan-desktop:~$
Then did this in case it helps you to help me: I don't understand this!
===============================
jonathan@jonathan-desktop:~$ sudo ls -l /dev/ttySM0 /dev/pts/*
crw--w---- 1 nobody dialout 136, 0 2011-02-22 18:28 /dev/pts/0
crw--w---- 1 jonathan tty 136, 1 2011-02-22 18:36 /dev/pts/1
c--------- 1 root root 5, 2 2011-02-23 05:28 /dev/pts/ptmx
lrwxrwxrwx 1 root root 10 2011-02-22 18:28 /dev/ttySM0 -> /dev/pts/0
jonathan@jonathan-desktop:~$
My current wvdial.conf
==========================
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Password = [******]
Phone = 0198331111
; Baud = 14400
Modem Type = Analog Modem
Stupid mode = on
Baud = 460800
New PPPD = yes
Modem = /dev/ttySM0
ISDN = 0
Username = jhsmithson@xxxxxxxxxxxxxxx
Carrier Check = no
This is when I tried to connect. I can actually hear the connection
and once only, it connected!
===================================================
jonathan@jonathan-desktop:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDT0198331111
--> Waiting for carrier.
ATDT0198331111
--> Timed out while dialing. Trying again.
--> Sending: ATDT0198331111
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT0198331111
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT0198331111
--> Waiting for carrier.
--> Timed out while dialing. Trying again.
--> Sending: ATDT0198331111
--> Waiting for carrier.
NO CARRIER
--> No Carrier! Trying again.
--> Sending: ATDT0198331111
--> Waiting for carrier.
ATDT0198331111
ATDT0198331111
ERROR
--> Invalid dial command.
--> Disconnecting at Tue Feb 22 18:46:02 2011
jonathan@jonathan-desktop:~$
