Fibonacci,
(0,1,1,2,3,5,8,13,...)
Excellent! Thank you for sending us the infomation requested.
We now turn our attention to
Don't worry about the following, it is for experts should trouble
shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 6
2010-12-21 22:43 /dev/modem -> ttySL0
slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10
2010-12-21 22:43 /dev/ttySL0 -> /dev/pts/2
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e
/dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) ||
(/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout
/dev/slamr0)
/etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e
/dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) ||
(/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout
/dev/slusb0)
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
I try to see which alsa/sound driver needs to be loaded for slmodem to
work correctly, but I can't see it :(
UNKNOWN PASTE ID!
- Unknown paste ID, it may have expired or been deleted!
As another alternative that may / may not help since devel packages
are installed you can download slmodem-20100718.tar.gz and try to
create your own local version of SLMODEMD
http://linmodems.technion.ac.il/packages/smartlink/slmodem-2.9.11-20100718.tar.gz
extract it with
$ tar -zxvf slmodem-2.9.11-20100718.tar.gz
$ cd slmodem-2.9.11-20100718
$ cd modem
$ make ALSA_SUPORT=1
[olivares@acer-aspire-1 slmodem-2.9.11-20100718]$ cd modem/
[olivares@acer-aspire-1 modem]$ make SUPPORT_ALSA=1
rebuild profile...
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_main.o -c modem_main.c
modem_main.c: In function ‘setup_stream’:
modem_main.c:429: warning: ‘snd_pcm_sw_params_set_xfer_align’ is
deprecated (declared at /usr/include/alsa/pcm.h:1114)
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_cmdline.o -c modem_cmdline.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o modem.o
-c modem.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_datafile.o -c modem_datafile.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_at.o -c modem_at.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_timer.o -c modem_timer.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_pack.o -c modem_pack.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_ec.o -c modem_ec.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_comp.o -c modem_comp.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_param.o -c modem_param.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_debug.o -c modem_debug.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
homolog_data.o -c homolog_data.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
dp_sinus.o -c dp_sinus.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
dp_dummy.o -c dp_dummy.c
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
sysdep_common.o -c sysdep_common.c
gcc -o slmodemd modem_main.o modem_cmdline.o modem.o modem_datafile.o
modem_at.o modem_timer.o modem_pack.o modem_ec.o modem_comp.o
modem_param.o modem_debug.o homolog_data.o dp_sinus.o dp_dummy.o
dsplibs.o sysdep_common.o /usr/lib/libasound.so
gcc -Wall -g -O -I. -DCONFIG_DEBUG_MODEM -DSUPPORT_ALSA=1 -o
modem_test.o -c modem_test.c
gcc -o modem_test modem_test.o modem_cmdline.o modem.o
modem_datafile.o modem_at.o modem_timer.o modem_pack.o modem_ec.o
modem_comp.o modem_param.o modem_debug.o homolog_data.o dp_sinus.o
dp_dummy.o dsplibs.o sysdep_common.o /usr/lib/libasound.so
[olivares@acer-aspire-1 modem]$ ls slmodemd -l
-rwxrwxr-x. 1 olivares olivares 1317270 Jan 23 13:48 slmodemd
and see if you can connect with your own local version of slmodemd
Hopefully, this can fix the carrier errors and ulimit ones too.
Marv can help with alternative method using sl-modem-source under Debian/Ubuntu.
Regards,
Antonio
On Sun, Jan 23, 2011 at 1:19 PM, Fibonacci Prower
<fibonacci.prower@xxxxxxxxx> wrote:
> 2011/1/23 Antonio Olivares <olivares14031@xxxxxxxxx>:
>> Fibonacci,
>>
>> We are closer but not there yet :(
>> I was hesitant because scanModem reported agrsm-11c11040 too
>> Predictive diagnostics for card in bus 02:06.4:
>> Modem chipset detected on
>> NAME="Communication controller: Texas Instruments PCIxx12 GemCore
>> based SmartCard controller"
>> CLASS=0780
>> PCIDEV=104c:803d
>> SUBSYS=103c:30ac
>> IRQ=11
>> HDA2=00:1b.0
>> HDAchipVendorID=11c1
>> CHIP=0x11c13026
>> IDENT=slmodemd
>> SLMODEMD_DEVICE=hw:0,6
>> Driver=snd-hda-intel
>> package=agrsm-11c11040
>>
>> That is definitely disagreeing. If we can get output of
>> $ sudo aplay -l
>
> **** List of PLAYBACK Hardware Devices ****
> card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
> card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
> Subdevices: 1/1
> Subdevice #0: subdevice #0
>
>> or run
>> $ sudo alsa-info.sh
>
> ALSA Information Script v 0.4.60
> --------------------------------
>
> This script visits the following commands/files to collect diagnostic
> information about your ALSA installation and sound related hardware.
>
> dmesg
> lspci
> lsmod
> aplay
> amixer
> alsactl
> /proc/asound/
> /sys/class/sound/
> ~/.asoundrc (etc.)
>
> See './alsa-info.sh --help' for command line options.
>
> Automatically upload ALSA information to www.alsa-project.org? [y/N] : n
>
>
> Your ALSA information is in /tmp/alsa-info.txt.5v0IORcMrv
>
>
> That file is HUGE so I'm not pasting it within this message. It can be
> accessed on http://pastebin.com/KgcNH79
>
>> and send us output
>>
>> http://git.alsa-project.org/?p=alsa-driver.git;a=blob_plain;f=utils/alsa-info.sh
>>
>> This way we can try to determine which driver is needed to load
>> (snd_????-modem) if possible.
>>
>> Regards,
>>
>> Antonio
>>
>> On Sun, Jan 23, 2011 at 12:01 PM, Fibonacci Prower
>> <fibonacci.prower@xxxxxxxxx> wrote:
>>> 2011/1/23 Antonio Olivares <olivares14031@xxxxxxxxx>:
>>>> Fibonacci,
>>>>
>>>> There are two conflicting drivers here:
>>>>
>>>> Potentially useful modem drivers now loaded are:
>>>> snd_hda_intel slamr
>>>>
>>>> Try to do the following:
>>>>
>>>> $ sudo modprobe -r slamr
>>> No problem here:
>>>> $ sudo modprobe -r snd_hda_intel
>>> FATAL: Module snd_hda_intel is in use.
>>>> then reload the latter one
>>>> $ sudo modprobe snd_hda_intel
>>>> $ sudo slmodemd -c USA --alsa hw:0,6
>>> SmartLink Soft Modem: version 2.9.11 Sep 6 2010 12:33:03
>>> symbolic link `/dev/ttySL0' -> `/dev/pts/1' created.
>>> modem `hw:0,6' created. TTY is `/dev/pts/1'
>>> error: locked memory limit too low:
>>> error: need 8388608 bytes, have 65536 bytes
>>> error: try 'ulimit -l 8192'
>>>
>>> So I'm back to starting a root shell and then running this:
>>> # ulimit -l 8192 && slmodemd -c USA --alsa hw:0,6
>>>>
>>>> Leave this running in the background, fire up another terminal shell/tab and run
>>>> $ sudo wvdialconf /etc/wvdial.conf
>>>
>>> Editing `/etc/wvdial.conf'.
>>>
>>> Scanning your serial ports for a modem.
>>>
>>> Modem Port Scan<*1>: S0 S1
>>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>>> ttyS2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>>> Modem Port Scan<*1>: S3
>>> WvModem<*1>: Cannot get information for serial port.
>>> ttySL0<*1>: ATQ0 V1 E1 -- OK
>>> ttySL0<*1>: ATQ0 V1 E1 Z -- OK
>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK
>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>> ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem
>>> ttySL0<*1>: Speed 4800: AT -- OK
>>> ttySL0<*1>: Speed 9600: AT -- OK
>>> ttySL0<*1>: Speed 19200: AT -- OK
>>> ttySL0<*1>: Speed 38400: AT -- OK
>>> ttySL0<*1>: Speed 57600: AT -- OK
>>> ttySL0<*1>: Speed 115200: AT -- OK
>>> ttySL0<*1>: Speed 230400: AT -- OK
>>> ttySL0<*1>: Speed 460800: AT -- OK
>>> ttySL0<*1>: Max speed is 460800; that should be safe.
>>> ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
>>>
>>> Found a modem on /dev/ttySL0.
>>> Modem configuration written to /etc/wvdial.conf.
>>> ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
>>>
>>>>
>>>> to be safe you may run
>>>> $ dmesg | grep 'sl*' and output of
>>> Shouldn't it be 'sl' instead of 'sl*'? Anyway this is the output of the former:
>>> [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
>>> CPUs=2, Nodes=1
>>> [ 0.172235] bio: create slab <bio-0> at 0
>>> [ 0.560686] Cannot allocate resource for EISA slot 1
>>> [ 0.560688] Cannot allocate resource for EISA slot 2
>>> [ 0.560691] Cannot allocate resource for EISA slot 3
>>> [ 0.560693] Cannot allocate resource for EISA slot 4
>>> [ 0.560695] Cannot allocate resource for EISA slot 5
>>> [ 0.560697] Cannot allocate resource for EISA slot 6
>>> [ 0.560699] Cannot allocate resource for EISA slot 7
>>> [ 0.560701] Cannot allocate resource for EISA slot 8
>>> [ 0.581865] input: AT Translated Set 2 keyboard as
>>> /devices/platform/i8042/serio0/input/input3
>>> [ 1.135273] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5
>>> Gbps 0x1 impl SATA mode
>>> [ 1.135278] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led
>>> clo pmp pio slum part
>>> [ 28.012927] slamr: SmartLink AMRMO modem.
>>>> $ sudo tail -f /var/log/messages
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.696342] Bluetooth: BNEP
>>> filters: protocol multicast
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.700521] Bluetooth: SCO
>>> (Voice Link) ver 0.6
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.700524] Bluetooth: SCO
>>> socket layer initialized
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.815105] Bluetooth: RFCOMM
>>> TTY layer initialized
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.815112] Bluetooth: RFCOMM
>>> socket layer initialized
>>> Jan 23 12:48:23 prower-laptop kernel: [ 29.815115] Bluetooth: RFCOMM ver 1.11
>>> Jan 23 12:48:25 prower-laptop kernel: [ 31.407768] EXT4-fs (sda5):
>>> re-mounted. Opts: errors=remount-ro,commit=0
>>> Jan 23 12:48:25 prower-laptop pulseaudio[1626]: lock-autospawn.c:
>>> Cannot access autospawn lock.
>>> Jan 23 12:48:26 prower-laptop kernel: [ 32.660192] input: PS/2
>>> Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8
>>> Jan 23 12:48:26 prower-laptop kernel: [ 32.888990] EXT4-fs (sda5):
>>> re-mounted. Opts: errors=remount-ro,commit=0
>>>> last few lines when running the above commands. Report back presently.
>>>>
>>>> Regards,
>>>>
>>>> Antonio
>>>>
>>>> On Sun, Jan 23, 2011 at 2:43 AM, Fibonacci Prower
>>>> <fibonacci.prower@xxxxxxxxx> wrote:
>>>>> 2011/1/23 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>:
>>>>>> Fibonacci
>>>>>>
>>>>>> Please disconnect the USB devices as much as possible, and take out
>>>>>> any PCMCIA cards
>>>>>> Your System seems low on RAM. Again run scanModem
>>>>>> On your first round the important ALSA diagnostics did not get written
>>>>>> to ModemData.txt
>>>>>> even the directions to use slmodemd seem correct.
>>>>>>
>>>>>
>>>>> No user-removable USB devices or PCMCIA cards were connnected at the
>>>>> time I ran scanModem.
>>>>> The new ModemData.txt is on the bottom.
>>>>>
>>>>>> The logic in my scanModem script is not sophisticated enought to
>>>>>> always succeed when there on two candidate COMM cards.
>>>>>>
>>>>>> But as I read it, there is an Agere chip
>>>>>> CHIP=0x11c13026, hosted on the Subsystem of the High Defintion Audio card
>>>>>> with the real smarts in the slmodemd helper using the dynamically created
>>>>>> SLMODEMD_DEVICE=hw:0,6
>>>>>> corresponding to /dev/ttySL0 -> /dev/pts/2 (the real port)
>>>>>>
>>>>>> You can first try:
>>>>>> $ lsmod
>>>>>> to display drivers, then starting from the top of list, try removing
>>>>>> non-essential drivers with
>>>>>> $ sudo modprobe -r DriverNames
>>>>>>
>>>>>
>>>>> How do I know which driver does what?
>>>>>
>>>>>> A first functionality test is detecting the modem with:
>>>>>> $ sudo wvdialconf
>>>>>>
>>>>>
>>>>> This is what I get:
>>>>>
>>>>> Editing `/etc/wvdial.conf'.
>>>>>
>>>>> Scanning your serial ports for a modem.
>>>>>
>>>>> Modem Port Scan<*1>: S0 S1
>>>>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
>>>>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
>>>>> ttyS2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
>>>>> Modem Port Scan<*1>: S3
>>>>>
>>>>>
>>>>> Sorry, no modem was detected! Is it in use by another program?
>>>>> Did you configure it properly with setserial?
>>>>>
>>>>> Please read the FAQ at http://open.nit.ca/wiki/?WvDial
>>>>>
>>>>> If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>.
>>>>>
>>>>>> Try these and report back
>>>>>>
>>>>>> MarvS
>>>>>> scanModem maintainer
>>>>>> On Sun, Jan 23, 2011 at 2:15 AM, Fibonacci Prower
>>>>>> <fibonacci.prower@xxxxxxxxx> wrote:
>>>>>>> Hello.
>>>>>>>
>>>>>>> I'm trying to use the modem which came with my laptop to connect to
>>>>>>> the internet. Unfortunately it's a winmodem, like most.
>>>>>>> The output of scanModem (attached) is not clear enough as to which
>>>>>>> driver should be used on this modem. I finally installed and
>>>>>>> configured sl-modem-daemon - but I still don't know which country
>>>>>>> should I specify, since Colombia (where I currently live) is not one
>>>>>>> of the available options.
>>>>>>> It appears, nevertheless, that my system is talking to the modem. I
>>>>>>> can't connect to the internet, though, since I always get this message
>>>>>>> with either Gnome-PPP or WvDial:
>>>>>>>
>>>>>>> --> WvDial: Internet dialer version 1.60
>>>>>>> --> Cannot get information for serial port.
>>>>>>> --> Initializing modem.
>>>>>>> --> Sending: ATZ
>>>>>>> ATZ
>>>>>>> OK
>>>>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
>>>>>>> OK
>>>>>>> --> Modem initialized.
>>>>>>> --> Sending: ATM1L3DT019479472323
>>>>>>> --> Waiting for carrier.
>>>>>>> ATM1L3DT019479472323
>>>>>>> NO CARRIER
>>>>>>> --> No Carrier! Trying again.
>>>>>>>
>>>>>>> That happens even after I've set Carrier Check = no on wvdial.conf, so
>>>>>>> I'm stuck here.
>>>>>>>
>>>>>>> After rebooting, I get the following error message from both Gnome-PPP
>>>>>>> and WvDial:
>>>>>>>
>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>> --> Cannot open /dev/ttySL0: No such file or directory
>>>>>>>
>>>>>>> Problem is, /dev/ttySL0 is there and world-writable. OK, then, I'll
>>>>>>> try restarting slmodemd:
>>>>>>>
>>>>>>> $ sudo slmodemd -c USA --alsa hw:0,6
>>>>>>> error: locked memory limit too low:
>>>>>>> error: need 8388608 bytes, have 65536 bytes
>>>>>>> error: try 'ulimit -l 8192'
>>>>>>>
>>>>>>> Oh well. Since sudo ulimit doesn't work, I need to start a root shell,
>>>>>>> THEN run the ulimit code suggested, THEN slmodemd -c USA --alsa
>>>>>>> hw:0,6, and THEN... nothing. I'm right back at square one - no
>>>>>>> carrier.
>>>>>>>
>>>>>>> Also: the exact same setup works under Windows XP, so I know there's
>>>>>>> nothing wrong with my hardware.
>>>>>>>
>>>>>>> The full content of ModemData.txt follows:
>>>>>>>
>>>>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
>>>>>>> as HTML can contain viruses. Use as the email Subject Line:
>>>>>>> YourName, YourCountry kernel 2.6.35-24-generic
>>>>>>> With this Subject Line cogent experts will be alerted, and useful
>>>>>>> case names left in the Archive.
>>>>>>> YourCountry will enable Country specific guidance. Linux experts in YourCountry
>>>>>>> can be found through: http://www.linux.org/groups/index.html.
>>>>>>> They will know your Country's modem code, which may be essential for
>>>>>>> dialup service.
>>>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
>>>>>>> Internet Provider mail filters.
>>>>>>> So in a day, also check the Archived responses at http://www.linmodems.org
>>>>>>> -------------------------- System information ----------------------------
>>>>>>> CPU=i686, Ubuntu , ALSA_version=1.0.23
>>>>>>> Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5
>>>>>>> (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57
>>>>>>> UTC 2010
>>>>>>> scanModem update of: 2010_12_12
>>>>>>> The modem symbolic link is /dev/modem -> ttySL0
>>>>>>> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/2
>>>>>>> Distrib_ID=Ubuntu
>>>>>>> DistribCodeName=maverick
>>>>>>> AptRepositoryStem=http://ubuntu.wikimedia.org/ubuntu/
>>>>>>>
>>>>>>>
>>>>>>> The dkms driver upgrade utilities are installed,
>>>>>>>
>>>>>>> There are no blacklisted modem drivers in /etc/modprobe* files
>>>>>>>
>>>>>>> Potentially useful modem drivers now loaded are:
>>>>>>> snd_hda_intel
>>>>>>>
>>>>>>> Attached USB devices are:
>>>>>>> ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
>>>>>>> ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface
>>>>>>> [Integrated Module]
>>>>>>> ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270
>>>>>>> HSDPA/HSUPA Modem
>>>>>>> ID 0781:5406 SanDisk Corp. Cruzer Micro U3
>>>>>>> If a cellphone is not detected, see
>>>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>>>>> A sample report is:
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>>>>>
>>>>>>> If a USB modem or cellphone is attached and was not detected, please
>>>>>>> provide available information in your request to discuss@xxxxxxxxxxxxx
>>>>>>>
>>>>>>> Candidate PCI devices with modem chips are:
>>>>>>> 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore
>>>>>>> based SmartCard controller
>>>>>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>>>> Definition Audio Controller (rev 01)
>>>>>>> High Definition Audio cards can host modem chips.
>>>>>>>
>>>>>>> For candidate card in slot 02:06.4, firmware information and bootup
>>>>>>> diagnostics are:
>>>>>>> PCI slot PCI ID SubsystemID Name
>>>>>>> ---------- --------- --------- --------------
>>>>>>> 02:06.4 104c:803d 103c:30ac Communication controller: Texas
>>>>>>> Instruments PCIxx12 GemCore based SmartCard controller
>>>>>>>
>>>>>>> Modem interrupt assignment and sharing:
>>>>>>> --- Bootup diagnostics for card in PCI slot 02:06.4 ----
>>>>>>> [ 0.293990] pci 0000:02:06.4: reg 10: [mem 0xe420a000-0xe420afff]
>>>>>>> [ 0.294000] pci 0000:02:06.4: reg 14: [mem 0xe420b000-0xe420bfff]
>>>>>>> [ 0.294070] pci 0000:02:06.4: supports D1 D2
>>>>>>> [ 0.294072] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
>>>>>>> [ 0.294078] pci 0000:02:06.4: PME# disabled
>>>>>>>
>>>>>>> The PCI slot 02:06.4 of the modem card may be disabled early in
>>>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>>>> if help is needed.
>>>>>>>
>>>>>>>
>>>>>>> For candidate card in slot 00:1b.0, firmware information and bootup
>>>>>>> diagnostics are:
>>>>>>> PCI slot PCI ID SubsystemID Name
>>>>>>> ---------- --------- --------- --------------
>>>>>>> 00:1b.0 8086:27d8 103c:30ac Audio device: Intel Corporation
>>>>>>> N10/ICH 7 Family High Definition Audio Controller
>>>>>>>
>>>>>>> Modem interrupt assignment and sharing:
>>>>>>> 45: 16836 0 PCI-MSI-edge hda_intel
>>>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>>>>>>> [ 0.290686] pci 0000:00:1b.0: reg 10: [mem 0xe4700000-0xe4703fff 64bit]
>>>>>>> [ 0.290750] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>>>>> [ 0.290755] pci 0000:00:1b.0: PME# disabled
>>>>>>> [ 28.827744] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>>>>>>> [ 28.827779] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>>>>>>> [ 28.827788] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
>>>>>>> low) -> IRQ 16
>>>>>>> [ 28.827858] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>>>>>>> [ 28.827891] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>>>
>>>>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in
>>>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>>>> if help is needed.
>>>>>>>
>>>>>>>
>>>>>>> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>>>>>>>
>>>>>>> Predictive diagnostics for card in bus 02:06.4:
>>>>>>> Modem chipset detected on
>>>>>>> NAME="Communication controller: Texas Instruments PCIxx12 GemCore
>>>>>>> based SmartCard controller"
>>>>>>> CLASS=0780
>>>>>>> PCIDEV=104c:803d
>>>>>>> SUBSYS=103c:30ac
>>>>>>> IRQ=11
>>>>>>> HDA2=00:1b.0
>>>>>>> HDAchipVendorID=11c1
>>>>>>> CHIP=0x11c13026
>>>>>>> IDENT=slmodemd
>>>>>>> SLMODEMD_DEVICE=hw:0,6
>>>>>>> Driver=snd-hda-intel
>>>>>>> package=agrsm-11c11040
>>>>>>>
>>>>>>> For candidate modem in: 02:06.4
>>>>>>> 0780 Communication controller: Texas Instruments PCIxx12 GemCore
>>>>>>> based SmartCard controller
>>>>>>> Primary device ID: 104c:803d
>>>>>>> Support type needed or chipset: slmodemd
>>>>>>>
>>>>>>>
>>>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
>>>>>>> provides Low Level support enabling contact with the modem hardware.
>>>>>>> For all BUT Conexant chip soft modems (using hsfmodem software)
>>>>>>> complementary High Level support is through a Smartlink utility: slmodemd
>>>>>>>
>>>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/
>>>>>>> the package SLMODEMD_gcc4.4_alsa1.0.23.tar.gz having a compiled
>>>>>>> slmodemd. Unpack under Linux with:
>>>>>>> $ tar zxf SLMODEMD_gcc4.4_alsa1.0.23.tar.gz
>>>>>>> and read instructions therein. But briefly, the modem is setup with command:
>>>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>>>>>>> reporting dynamic creation of ports:
>>>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number
>>>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
>>>>>>> through guidance.
>>>>>>>
>>>>>>>
>>>>>>> Writing DOCs/Intel.txt
>>>>>>> Writing DOCs/Smartlink.txt
>>>>>>> ============ end Smartlink section =====================
>>>>>>>
>>>>>>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
>>>>>>> agrserial driver pair.
>>>>>>> There are a few different chipsets which use this driver pair, but
>>>>>>> they use different code resources:
>>>>>>> Chipsets KV* PackageNames (most current as of November 2009)
>>>>>>> ----------------------------------------------------------------------------------------------
>>>>>>> 11c1:048c and 11c1:048f 2.6.29
>>>>>>> agrsm048pci-2.1.60_20100108_i386.deb or
>>>>>>> agrsm048pci-2.1.60_20100108.tar.gz
>>>>>>> 11c1:0620 2.6.31
>>>>>>> agrsm06pci-2.1.80_20100106_i386.deb or
>>>>>>> agrsm06pci-2.1.80~20100106.tar.gz !!
>>>>>>> 11c11040 (on HDA audio cards) 2.6.31
>>>>>>> agrsm-11c11040_20091225_i386.deb or
>>>>>>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
>>>>>>> All available at:
>>>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>>>> Additionally there are;
>>>>>>> automation & testing agrsm-tools_0.0.1_all.deb or
>>>>>>> agrsm-tools-0.0.1-2.noarch.rpm
>>>>>>> General background agrsm_howto.txt
>>>>>>> ------------------------------------------------------------------------------------------------
>>>>>>> * KV == latest kernel release with a reported success
>>>>>>> !! Latest update with major credit to Nikolay Zhuravlev
>>>>>>> But see conflict issue:
>>>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
>>>>>>> For the 11c11040 chip with kernels 2.6.31 and later a change in a
>>>>>>> modules loading settingmay be necessary.
>>>>>>> Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for
>>>>>>> your Distro), change the phrase:
>>>>>>> options snd-hda-intel power_save=10
>>>>>>> to:
>>>>>>> options snd-hda-intel power_save=0
>>>>>>> or the agrsm drivers will not function. For Ubuntu related systems
>>>>>>> this can be done with:
>>>>>>> $ sudo gedit /etc/modprobe.d/alsa-base.conf
>>>>>>>
>>>>>>> Report from Bjorn Wielens:
>>>>>>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>>>>>>> an error about the module_version symbol. Using:
>>>>>>> # modprobe --force agrmodem
>>>>>>> # modprobe --force agrserial
>>>>>>> is necessary to load the drivers, and does not appear to cause ill effects.
>>>>>>>
>>>>>>>
>>>>>>> All of the above packages are dkms competent. This means that if your
>>>>>>> Linux distros dkms package
>>>>>>> is previously installed, if provides for future updates matching
>>>>>>> forthcoming kernels.
>>>>>>>
>>>>>>> -------------- end Agere Systems section -------------------
>>>>>>>
>>>>>>>
>>>>>>> Predictive diagnostics for card in bus 00:1b.0:
>>>>>>> Modem chipset not detected on
>>>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition
>>>>>>> Audio Controller "
>>>>>>> CLASS=0403
>>>>>>> PCIDEV=8086:27d8
>>>>>>> SUBSYS=103c:30ac
>>>>>>> IRQ=45
>>>>>>>
>>>>>>> For candidate modem in: 00:1b.0
>>>>>>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>>>> Definition Audio Controller
>>>>>>> Primary device ID: 8086:27d8
>>>>>>> Support type needed or chipset:
>>>>>>>
>>>>>>>
>>>>>>> Completed candidate modem analyses.
>>>>>>>
>>>>>>> The base of the UDEV device file system is: /dev/.udev
>>>>>>>
>>>>>>> Versions adequately match for the compiler installed: 4.4.5
>>>>>>> and the compiler used in kernel assembly: 4.4.5
>>>>>>>
>>>>>>> linux-headers-2.6.35-24-generic resources needed for compiling are
>>>>>>> not manifestly ready!
>>>>>>>
>>>>>>> If compiling is necessary packages must be installed, providing:
>>>>>>> linux-headers-2.6.35-24-generic
>>>>>>>
>>>>>>>
>>>>>>> If a driver compilation fails, with message including some lack of
>>>>>>> some FileName.h (stdio.h for example), then
>>>>>>> Some additional kernel-header files need installation to /usr/include.
>>>>>>> The minimal additional packages are libc6-dev
>>>>>>> and any of its dependents, under Ubuntu linux-libc-dev
>>>>>>>
>>>>>>> If an alternate ethernet connection is available,
>>>>>>> $ apt-get update
>>>>>>> $ apt-get -s install linux-kernel-devel
>>>>>>> will install needed packages.
>>>>>>> For Debian/Ubuntu related distributions, run the following command to
>>>>>>> display the needed package list:
>>>>>>>
>>>>>>> Otherwise packages have to be found through http://packages.ubuntu.com
>>>>>>> Once downloaded and transferred into a Linux partition,
>>>>>>> they can be installed alltogether with:
>>>>>>> $ sudo dpkg -i *.deb
>>>>>>>
>>>>>>> Checking settings of: /etc/ppp/options
>>>>>>> asyncmap 0
>>>>>>> noauth
>>>>>>> crtscts
>>>>>>> lock
>>>>>>> hide-password
>>>>>>> modem
>>>>>>> proxyarp
>>>>>>> lcp-echo-interval 30
>>>>>>> lcp-echo-failure 4
>>>>>>> noipx
>>>>>>>
>>>>>>> In case of a message like:
>>>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>>>>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>>>>>>
>>>>>>> For guidance on FAX usage, get from
>>>>>>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
>>>>>>> It has samples for a modem using port /dev/ttySL0, which must be
>>>>>>> changed to match your modem's port.
>>>>>>>
>>>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth2 ppp0
>>>>>>> Which can interfere with Browser naviagation.
>>>>>>>
>>>>>>> Don't worry about the following, it is for experts should trouble
>>>>>>> shooting be necessary.
>>>>>>> ==========================================================
>>>>>>>
>>>>>>> Checking for modem support lines:
>>>>>>> --------------------------------------
>>>>>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6
>>>>>>> 2010-12-21 22:43 /dev/modem -> ttySL0
>>>>>>> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10
>>>>>>> 2010-12-21 22:43 /dev/ttySL0 -> /dev/pts/2
>>>>>>> Within /etc/udev/ files:
>>>>>>>
>>>>>>> Within /etc/modprobe.conf files:
>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>>>>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>>>>>>> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
>>>>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e
>>>>>>> /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) ||
>>>>>>> (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout
>>>>>>> /dev/slamr0)
>>>>>>> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
>>>>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e
>>>>>>> /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) ||
>>>>>>> (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout
>>>>>>> /dev/slusb0)
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>>>>>>> order to blacklist unwanted modem drivers
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>>>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>>>>>>> Within any ancient /etc/devfs files:
>>>>>>>
>>>>>>> Within ancient kernel 2.4.n /etc/module.conf files:
>>>>>>>
>>>>>>> --------- end modem support lines --------
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m",
>>>>>>> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',(
>>>>>>> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39"
>>>>>>> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz
>>>>>>>
>>>>>>
>>>>>
>>>>> This is ModemData.txt:
>>>>>
>>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
>>>>> as HTML can contain viruses. Use as the email Subject Line:
>>>>> YourName, YourCountry kernel 2.6.35-25-generic
>>>>> With this Subject Line cogent experts will be alerted, and useful
>>>>> case names left in the Archive.
>>>>> YourCountry will enable Country specific guidance. Linux experts in
>>>>> YourCountry
>>>>> can be found through: http://www.linux.org/groups/index.html.
>>>>> They will know your Country's modem code, which may be essential for
>>>>> dialup service.
>>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an
>>>>> Internet Provider mail filters.
>>>>> So in a day, also check the Archived responses at http://www.linmodems.org
>>>>> -------------------------- System information ----------------------------
>>>>> CPU=i686, Ubuntu , ALSA_version=1.0.23
>>>>> Linux version 2.6.35-25-generic (buildd@roseapple) (gcc version 4.4.5
>>>>> (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #43-Ubuntu SMP Thu Jan 6 22:25:16
>>>>> UTC 2011
>>>>> scanModem update of: 2010_12_12
>>>>> The modem symbolic link is /dev/modem -> ttySL0
>>>>> Distrib_ID=Ubuntu
>>>>> DistribCodeName=maverick
>>>>> AptRepositoryStem=http://ubuntu.wikimedia.org/ubuntu/
>>>>>
>>>>>
>>>>> The dkms driver upgrade utilities are installed,
>>>>>
>>>>> There are no blacklisted modem drivers in /etc/modprobe* files
>>>>>
>>>>> Potentially useful modem drivers now loaded are:
>>>>> snd_hda_intel slamr
>>>>>
>>>>> Attached USB devices are:
>>>>> ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
>>>>> ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface
>>>>> [Integrated Module]
>>>>> If a cellphone is not detected, see
>>>>> http://ubuntuforums.org/archive/index.php/t-878554.html
>>>>> A sample report is:
>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>>>>>
>>>>> If a USB modem or cellphone is attached and was not detected, please
>>>>> provide available information in your request to discuss@xxxxxxxxxxxxx
>>>>>
>>>>> Candidate PCI devices with modem chips are:
>>>>> 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore
>>>>> based SmartCard controller
>>>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>> Definition Audio Controller (rev 01)
>>>>> High Definition Audio cards can host modem chips.
>>>>>
>>>>> For candidate card in slot 02:06.4, firmware information and bootup
>>>>> diagnostics are:
>>>>> PCI slot PCI ID SubsystemID Name
>>>>> ---------- --------- --------- --------------
>>>>> 02:06.4 104c:803d 103c:30ac Communication controller: Texas
>>>>> Instruments PCIxx12 GemCore based SmartCard controller
>>>>>
>>>>> Modem interrupt assignment and sharing:
>>>>> --- Bootup diagnostics for card in PCI slot 02:06.4 ----
>>>>> [ 0.287491] pci 0000:02:06.4: reg 10: [mem 0xe420a000-0xe420afff]
>>>>> [ 0.287502] pci 0000:02:06.4: reg 14: [mem 0xe420b000-0xe420bfff]
>>>>> [ 0.287572] pci 0000:02:06.4: supports D1 D2
>>>>> [ 0.287574] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
>>>>> [ 0.287580] pci 0000:02:06.4: PME# disabled
>>>>>
>>>>> The PCI slot 02:06.4 of the modem card may be disabled early in
>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>> if help is needed.
>>>>>
>>>>>
>>>>> For candidate card in slot 00:1b.0, firmware information and bootup
>>>>> diagnostics are:
>>>>> PCI slot PCI ID SubsystemID Name
>>>>> ---------- --------- --------- --------------
>>>>> 00:1b.0 8086:27d8 103c:30ac Audio device: Intel Corporation N10/ICH 7
>>>>> Family High Definition Audio Controller
>>>>>
>>>>> Modem interrupt assignment and sharing:
>>>>> 45: 1004 0 PCI-MSI-edge hda_intel
>>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
>>>>> [ 0.284217] pci 0000:00:1b.0: reg 10: [mem 0xe4700000-0xe4703fff 64bit]
>>>>> [ 0.284281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>>>>> [ 0.284286] pci 0000:00:1b.0: PME# disabled
>>>>> [ 18.824476] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>>>>> [ 18.824512] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
>>>>> [ 18.824522] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level,
>>>>> low) -> IRQ 16
>>>>> [ 18.824602] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X
>>>>> [ 18.824636] HDA Intel 0000:00:1b.0: setting latency timer to 64
>>>>>
>>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in
>>>>> a bootup process, but then enabled later. If modem drivers load
>>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
>>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
>>>>> if help is needed.
>>>>>
>>>>>
>>>>> === Finished firmware and bootup diagnostics, next deducing cogent software. ===
>>>>>
>>>>> Predictive diagnostics for card in bus 02:06.4:
>>>>> Modem chipset detected on
>>>>> NAME="Communication controller: Texas Instruments PCIxx12 GemCore
>>>>> based SmartCard controller"
>>>>> CLASS=0780
>>>>> PCIDEV=104c:803d
>>>>> SUBSYS=103c:30ac
>>>>> IRQ=11
>>>>> HDA2=00:1b.0
>>>>> HDAchipVendorID=11c1
>>>>> CHIP=0x11c13026
>>>>> IDENT=slmodemd
>>>>> SLMODEMD_DEVICE=hw:0,6
>>>>> Driver=snd-hda-intel
>>>>> package=agrsm-11c11040
>>>>>
>>>>> For candidate modem in: 02:06.4
>>>>> 0780 Communication controller: Texas Instruments PCIxx12 GemCore
>>>>> based SmartCard controller
>>>>> Primary device ID: 104c:803d
>>>>> Support type needed or chipset: slmodemd
>>>>>
>>>>>
>>>>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel
>>>>> provides Low Level support enabling contact with the modem hardware.
>>>>> For all BUT Conexant chip soft modems (using hsfmodem software)
>>>>> complementary High Level support is through a Smartlink utility: slmodemd
>>>>>
>>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/
>>>>> the package SLMODEMD_gcc4.4_alsa1.0.23.tar.gz having a compiled
>>>>> slmodemd. Unpack under Linux with:
>>>>> $ tar zxf SLMODEMD_gcc4.4_alsa1.0.23.tar.gz
>>>>> and read instructions therein. But briefly, the modem is setup with command:
>>>>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6
>>>>> reporting dynamic creation of ports:
>>>>> /dev/ttySL0 --> /dev/pts/N , with N some number
>>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow
>>>>> through guidance.
>>>>>
>>>>>
>>>>> Writing DOCs/Intel.txt
>>>>> Writing DOCs/Smartlink.txt
>>>>> ============ end Smartlink section =====================
>>>>>
>>>>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
>>>>> agrserial driver pair.
>>>>> There are a few different chipsets which use this driver pair, but
>>>>> they use different code resources:
>>>>> Chipsets KV* PackageNames (most current as of November 2009)
>>>>> ----------------------------------------------------------------------------------------------
>>>>> 11c1:048c and 11c1:048f
>>>>> 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or
>>>>> agrsm048pci-2.1.60_20100108.tar.gz
>>>>> 11c1:0620 2.6.31
>>>>> agrsm06pci-2.1.80_20100106_i386.deb or
>>>>> agrsm06pci-2.1.80~20100106.tar.gz !!
>>>>> 11c11040 (on HDA audio cards) 2.6.31
>>>>> agrsm-11c11040_20091225_i386.deb or
>>>>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
>>>>> All available at:
>>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
>>>>> Additionally there are;
>>>>> automation & testing agrsm-tools_0.0.1_all.deb or
>>>>> agrsm-tools-0.0.1-2.noarch.rpm
>>>>> General background agrsm_howto.txt
>>>>> ------------------------------------------------------------------------------------------------
>>>>> * KV == latest kernel release with a reported success
>>>>> !! Latest update with major credit to Nikolay Zhuravlev
>>>>> But see conflict issue:
>>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
>>>>> For the 11c11040 chip with kernels 2.6.31 and later a change in a
>>>>> modules loading settingmay be necessary.
>>>>> Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for
>>>>> your Distro), change the phrase:
>>>>> options snd-hda-intel power_save=10
>>>>> to:
>>>>> options snd-hda-intel power_save=0
>>>>> or the agrsm drivers will not function. For Ubuntu related systems
>>>>> this can be done with:
>>>>> $ sudo gedit /etc/modprobe.d/alsa-base.conf
>>>>>
>>>>> Report from Bjorn Wielens:
>>>>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives
>>>>> an error about the module_version symbol. Using:
>>>>> # modprobe --force agrmodem
>>>>> # modprobe --force agrserial
>>>>> is necessary to load the drivers, and does not appear to cause ill effects.
>>>>>
>>>>>
>>>>> All of the above packages are dkms competent. This means that if your
>>>>> Linux distros dkms package
>>>>> is previously installed, if provides for future updates matching
>>>>> forthcoming kernels.
>>>>>
>>>>> -------------- end Agere Systems section -------------------
>>>>>
>>>>>
>>>>> Predictive diagnostics for card in bus 00:1b.0:
>>>>> Modem chipset not detected on
>>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition
>>>>> Audio Controller "
>>>>> CLASS=0403
>>>>> PCIDEV=8086:27d8
>>>>> SUBSYS=103c:30ac
>>>>> IRQ=45
>>>>>
>>>>> For candidate modem in: 00:1b.0
>>>>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High
>>>>> Definition Audio Controller
>>>>> Primary device ID: 8086:27d8
>>>>> Support type needed or chipset:
>>>>>
>>>>>
>>>>> Completed candidate modem analyses.
>>>>>
>>>>> The base of the UDEV device file system is: /dev/.udev
>>>>>
>>>>> Versions adequately match for the compiler installed: 4.4.5
>>>>> and the compiler used in kernel assembly: 4.4.5
>>>>>
>>>>> linux-headers-2.6.35-25-generic resources needed for compiling are
>>>>> not manifestly ready!
>>>>>
>>>>> If compiling is necessary packages must be installed, providing:
>>>>> linux-headers-2.6.35-25-generic
>>>>>
>>>>>
>>>>> If a driver compilation fails, with message including some lack of
>>>>> some FileName.h (stdio.h for example), then
>>>>> Some additional kernel-header files need installation to /usr/include.
>>>>> The minimal additional packages are libc6-dev
>>>>> and any of its dependents, under Ubuntu linux-libc-dev
>>>>>
>>>>> If an alternate ethernet connection is available,
>>>>> $ apt-get update
>>>>> $ apt-get -s install linux-kernel-devel
>>>>> will install needed packages.
>>>>> For Debian/Ubuntu related distributions, run the following command to
>>>>> display the needed package list:
>>>>>
>>>>> Otherwise packages have to be found through http://packages.ubuntu.com
>>>>> Once downloaded and transferred into a Linux partition,
>>>>> they can be installed alltogether with:
>>>>> $ sudo dpkg -i *.deb
>>>>>
>>>>>
>>>>> Checking pppd properties:
>>>>> -rwsr-xr-- 1 root dip 273248 2010-07-09 11:41 /usr/sbin/pppd
>>>>>
>>>>> In case of an "error 17" "serial loopback" problem, see:
>>>>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
>>>>>
>>>>> To enable dialout without Root permission do:
>>>>> $ su - root (not for Ubuntu)
>>>>> sudo chmod a+x /usr/sbin/pppd
>>>>> or under Ubuntu related Linuxes
>>>>> sudo chmod a+x /usr/sbin/pppd
>>>>>
>>>>> Checking settings of: /etc/ppp/options
>>>>> asyncmap 0
>>>>> noauth
>>>>> crtscts
>>>>> lock
>>>>> hide-password
>>>>> modem
>>>>> proxyarp
>>>>> lcp-echo-interval 30
>>>>> lcp-echo-failure 4
>>>>> noipx
>>>>>
>>>>> In case of a message like:
>>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
>>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
>>>>>
>>>>> For guidance on FAX usage, get from
>>>>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
>>>>> It has samples for a modem using port /dev/ttySL0, which must be
>>>>> changed to match your modem's port.
>>>>>
>>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth2
>>>>> Which can interfere with Browser naviagation.
>>>>>
>>>>> Don't worry about the following, it is for experts should trouble
>>>>> shooting be necessary.
>>>>> ==========================================================
>>>>>
>>>>> Checking for modem support lines:
>>>>> --------------------------------------
>>>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6
>>>>> 2011-01-23 02:10 /dev/modem -> ttySL0
>>>>> slmodemd created symbolic link /dev/ttySL0:
>>>>> Within /etc/udev/ files:
>>>>>
>>>>> Within /etc/modprobe.conf files:
>>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
>>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
>>>>> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb
>>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e
>>>>> /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) ||
>>>>> (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout
>>>>> /dev/slamr0)
>>>>> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb
>>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e
>>>>> /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) ||
>>>>> (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout
>>>>> /dev/slusb0)
>>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in
>>>>> order to blacklist unwanted modem drivers
>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
>>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
>>>>> Within any ancient /etc/devfs files:
>>>>>
>>>>> Within ancient kernel 2.4.n /etc/module.conf files:
>>>>>
>>>>> --------- end modem support lines --------
>>>>>
>>>>>
>>>>> --
>>>>> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m",
>>>>> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',(
>>>>> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39"
>>>>> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m",
>>> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',(
>>> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39"
>>> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz
>>>
>>
>
>
>
> --
> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m",
> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',(
> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39"
> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz
>
