I forgot to mention, I still get stuck on the "waiting for carrier" part. 2011/1/23 Fibonacci Prower <fibonacci.prower@xxxxxxxxx>: > 2011/1/23 Antonio Olivares <olivares14031@xxxxxxxxx>: >> Fibonacci, >> >> There are two conflicting drivers here: >> >> Potentially useful modem drivers now loaded are: >> snd_hda_intel slamr >> >> Try to do the following: >> >> $ sudo modprobe -r slamr > No problem here: >> $ sudo modprobe -r snd_hda_intel > FATAL: Module snd_hda_intel is in use. >> then reload the latter one >> $ sudo modprobe snd_hda_intel >> $ sudo slmodemd -c USA --alsa hw:0,6 > SmartLink Soft Modem: version 2.9.11 Sep 6 2010 12:33:03 > symbolic link `/dev/ttySL0' -> `/dev/pts/1' created. > modem `hw:0,6' created. TTY is `/dev/pts/1' > error: locked memory limit too low: > error: need 8388608 bytes, have 65536 bytes > error: try 'ulimit -l 8192' > > So I'm back to starting a root shell and then running this: > # ulimit -l 8192 && slmodemd -c USA --alsa hw:0,6 >> >> Leave this running in the background, fire up another terminal shell/tab and run >> $ sudo wvdialconf /etc/wvdial.conf > > Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > Modem Port Scan<*1>: S0 S1 > ttyS2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. > Modem Port Scan<*1>: S3 > WvModem<*1>: Cannot get information for serial port. > ttySL0<*1>: ATQ0 V1 E1 -- OK > ttySL0<*1>: ATQ0 V1 E1 Z -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > ttySL0<*1>: Modem Identifier: ATI -- SmartLink Soft Modem > ttySL0<*1>: Speed 4800: AT -- OK > ttySL0<*1>: Speed 9600: AT -- OK > ttySL0<*1>: Speed 19200: AT -- OK > ttySL0<*1>: Speed 38400: AT -- OK > ttySL0<*1>: Speed 57600: AT -- OK > ttySL0<*1>: Speed 115200: AT -- OK > ttySL0<*1>: Speed 230400: AT -- OK > ttySL0<*1>: Speed 460800: AT -- OK > ttySL0<*1>: Max speed is 460800; that should be safe. > ttySL0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK > > Found a modem on /dev/ttySL0. > Modem configuration written to /etc/wvdial.conf. > ttySL0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" > >> >> to be safe you may run >> $ dmesg | grep 'sl*' and output of > Shouldn't it be 'sl' instead of 'sl*'? Anyway this is the output of the former: > [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.172235] bio: create slab <bio-0> at 0 > [ 0.560686] Cannot allocate resource for EISA slot 1 > [ 0.560688] Cannot allocate resource for EISA slot 2 > [ 0.560691] Cannot allocate resource for EISA slot 3 > [ 0.560693] Cannot allocate resource for EISA slot 4 > [ 0.560695] Cannot allocate resource for EISA slot 5 > [ 0.560697] Cannot allocate resource for EISA slot 6 > [ 0.560699] Cannot allocate resource for EISA slot 7 > [ 0.560701] Cannot allocate resource for EISA slot 8 > [ 0.581865] input: AT Translated Set 2 keyboard as > /devices/platform/i8042/serio0/input/input3 > [ 1.135273] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 > Gbps 0x1 impl SATA mode > [ 1.135278] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led > clo pmp pio slum part > [ 28.012927] slamr: SmartLink AMRMO modem. >> $ sudo tail -f /var/log/messages > Jan 23 12:48:23 prower-laptop kernel: [ 29.696342] Bluetooth: BNEP > filters: protocol multicast > Jan 23 12:48:23 prower-laptop kernel: [ 29.700521] Bluetooth: SCO > (Voice Link) ver 0.6 > Jan 23 12:48:23 prower-laptop kernel: [ 29.700524] Bluetooth: SCO > socket layer initialized > Jan 23 12:48:23 prower-laptop kernel: [ 29.815105] Bluetooth: RFCOMM > TTY layer initialized > Jan 23 12:48:23 prower-laptop kernel: [ 29.815112] Bluetooth: RFCOMM > socket layer initialized > Jan 23 12:48:23 prower-laptop kernel: [ 29.815115] Bluetooth: RFCOMM ver 1.11 > Jan 23 12:48:25 prower-laptop kernel: [ 31.407768] EXT4-fs (sda5): > re-mounted. Opts: errors=remount-ro,commit=0 > Jan 23 12:48:25 prower-laptop pulseaudio[1626]: lock-autospawn.c: > Cannot access autospawn lock. > Jan 23 12:48:26 prower-laptop kernel: [ 32.660192] input: PS/2 > Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input8 > Jan 23 12:48:26 prower-laptop kernel: [ 32.888990] EXT4-fs (sda5): > re-mounted. Opts: errors=remount-ro,commit=0 >> last few lines when running the above commands. Report back presently. >> >> Regards, >> >> Antonio >> >> On Sun, Jan 23, 2011 at 2:43 AM, Fibonacci Prower >> <fibonacci.prower@xxxxxxxxx> wrote: >>> 2011/1/23 Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx>: >>>> Fibonacci >>>> >>>> Please disconnect the USB devices as much as possible, and take out >>>> any PCMCIA cards >>>> Your System seems low on RAM. Again run scanModem >>>> On your first round the important ALSA diagnostics did not get written >>>> to ModemData.txt >>>> even the directions to use slmodemd seem correct. >>>> >>> >>> No user-removable USB devices or PCMCIA cards were connnected at the >>> time I ran scanModem. >>> The new ModemData.txt is on the bottom. >>> >>>> The logic in my scanModem script is not sophisticated enought to >>>> always succeed when there on two candidate COMM cards. >>>> >>>> But as I read it, there is an Agere chip >>>> CHIP=0x11c13026, hosted on the Subsystem of the High Defintion Audio card >>>> with the real smarts in the slmodemd helper using the dynamically created >>>> SLMODEMD_DEVICE=hw:0,6 >>>> corresponding to /dev/ttySL0 -> /dev/pts/2 (the real port) >>>> >>>> You can first try: >>>> $ lsmod >>>> to display drivers, then starting from the top of list, try removing >>>> non-essential drivers with >>>> $ sudo modprobe -r DriverNames >>>> >>> >>> How do I know which driver does what? >>> >>>> A first functionality test is detecting the modem with: >>>> $ sudo wvdialconf >>>> >>> >>> This is what I get: >>> >>> Editing `/etc/wvdial.conf'. >>> >>> Scanning your serial ports for a modem. >>> >>> Modem Port Scan<*1>: S0 S1 >>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud >>> ttyS2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud >>> ttyS2<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. >>> Modem Port Scan<*1>: S3 >>> >>> >>> Sorry, no modem was detected! Is it in use by another program? >>> Did you configure it properly with setserial? >>> >>> Please read the FAQ at http://open.nit.ca/wiki/?WvDial >>> >>> If you still have problems, send mail to <wvdial-list@xxxxxxxxxxxx>. >>> >>>> Try these and report back >>>> >>>> MarvS >>>> scanModem maintainer >>>> On Sun, Jan 23, 2011 at 2:15 AM, Fibonacci Prower >>>> <fibonacci.prower@xxxxxxxxx> wrote: >>>>> Hello. >>>>> >>>>> I'm trying to use the modem which came with my laptop to connect to >>>>> the internet. Unfortunately it's a winmodem, like most. >>>>> The output of scanModem (attached) is not clear enough as to which >>>>> driver should be used on this modem. I finally installed and >>>>> configured sl-modem-daemon - but I still don't know which country >>>>> should I specify, since Colombia (where I currently live) is not one >>>>> of the available options. >>>>> It appears, nevertheless, that my system is talking to the modem. I >>>>> can't connect to the internet, though, since I always get this message >>>>> with either Gnome-PPP or WvDial: >>>>> >>>>> --> WvDial: Internet dialer version 1.60 >>>>> --> Cannot get information for serial port. >>>>> --> Initializing modem. >>>>> --> Sending: ATZ >>>>> ATZ >>>>> OK >>>>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >>>>> OK >>>>> --> Modem initialized. >>>>> --> Sending: ATM1L3DT019479472323 >>>>> --> Waiting for carrier. >>>>> ATM1L3DT019479472323 >>>>> NO CARRIER >>>>> --> No Carrier! Trying again. >>>>> >>>>> That happens even after I've set Carrier Check = no on wvdial.conf, so >>>>> I'm stuck here. >>>>> >>>>> After rebooting, I get the following error message from both Gnome-PPP >>>>> and WvDial: >>>>> >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> --> Cannot open /dev/ttySL0: No such file or directory >>>>> >>>>> Problem is, /dev/ttySL0 is there and world-writable. OK, then, I'll >>>>> try restarting slmodemd: >>>>> >>>>> $ sudo slmodemd -c USA --alsa hw:0,6 >>>>> error: locked memory limit too low: >>>>> error: need 8388608 bytes, have 65536 bytes >>>>> error: try 'ulimit -l 8192' >>>>> >>>>> Oh well. Since sudo ulimit doesn't work, I need to start a root shell, >>>>> THEN run the ulimit code suggested, THEN slmodemd -c USA --alsa >>>>> hw:0,6, and THEN... nothing. I'm right back at square one - no >>>>> carrier. >>>>> >>>>> Also: the exact same setup works under Windows XP, so I know there's >>>>> nothing wrong with my hardware. >>>>> >>>>> The full content of ModemData.txt follows: >>>>> >>>>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, >>>>> as HTML can contain viruses. Use as the email Subject Line: >>>>> YourName, YourCountry kernel 2.6.35-24-generic >>>>> With this Subject Line cogent experts will be alerted, and useful >>>>> case names left in the Archive. >>>>> YourCountry will enable Country specific guidance. Linux experts in YourCountry >>>>> can be found through: http://www.linux.org/groups/index.html. >>>>> They will know your Country's modem code, which may be essential for >>>>> dialup service. >>>>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>>>> Internet Provider mail filters. >>>>> So in a day, also check the Archived responses at http://www.linmodems.org >>>>> -------------------------- System information ---------------------------- >>>>> CPU=i686, Ubuntu , ALSA_version=1.0.23 >>>>> Linux version 2.6.35-24-generic (buildd@vernadsky) (gcc version 4.4.5 >>>>> (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #42-Ubuntu SMP Thu Dec 2 01:41:57 >>>>> UTC 2010 >>>>> scanModem update of: 2010_12_12 >>>>> The modem symbolic link is /dev/modem -> ttySL0 >>>>> The slmodemd set symbolic link is /dev/ttySL0 -> /dev/pts/2 >>>>> Distrib_ID=Ubuntu >>>>> DistribCodeName=maverick >>>>> AptRepositoryStem=http://ubuntu.wikimedia.org/ubuntu/ >>>>> >>>>> >>>>> The dkms driver upgrade utilities are installed, >>>>> >>>>> There are no blacklisted modem drivers in /etc/modprobe* files >>>>> >>>>> Potentially useful modem drivers now loaded are: >>>>> snd_hda_intel >>>>> >>>>> Attached USB devices are: >>>>> ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor >>>>> ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface >>>>> [Integrated Module] >>>>> ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 >>>>> HSDPA/HSUPA Modem >>>>> ID 0781:5406 SanDisk Corp. Cruzer Micro U3 >>>>> If a cellphone is not detected, see >>>>> http://ubuntuforums.org/archive/index.php/t-878554.html >>>>> A sample report is: >>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>>>> >>>>> If a USB modem or cellphone is attached and was not detected, please >>>>> provide available information in your request to discuss@xxxxxxxxxxxxx >>>>> >>>>> Candidate PCI devices with modem chips are: >>>>> 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore >>>>> based SmartCard controller >>>>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High >>>>> Definition Audio Controller (rev 01) >>>>> High Definition Audio cards can host modem chips. >>>>> >>>>> For candidate card in slot 02:06.4, firmware information and bootup >>>>> diagnostics are: >>>>> PCI slot PCI ID SubsystemID Name >>>>> ---------- --------- --------- -------------- >>>>> 02:06.4 104c:803d 103c:30ac Communication controller: Texas >>>>> Instruments PCIxx12 GemCore based SmartCard controller >>>>> >>>>> Modem interrupt assignment and sharing: >>>>> --- Bootup diagnostics for card in PCI slot 02:06.4 ---- >>>>> [ 0.293990] pci 0000:02:06.4: reg 10: [mem 0xe420a000-0xe420afff] >>>>> [ 0.294000] pci 0000:02:06.4: reg 14: [mem 0xe420b000-0xe420bfff] >>>>> [ 0.294070] pci 0000:02:06.4: supports D1 D2 >>>>> [ 0.294072] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot >>>>> [ 0.294078] pci 0000:02:06.4: PME# disabled >>>>> >>>>> The PCI slot 02:06.4 of the modem card may be disabled early in >>>>> a bootup process, but then enabled later. If modem drivers load >>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>> if help is needed. >>>>> >>>>> >>>>> For candidate card in slot 00:1b.0, firmware information and bootup >>>>> diagnostics are: >>>>> PCI slot PCI ID SubsystemID Name >>>>> ---------- --------- --------- -------------- >>>>> 00:1b.0 8086:27d8 103c:30ac Audio device: Intel Corporation >>>>> N10/ICH 7 Family High Definition Audio Controller >>>>> >>>>> Modem interrupt assignment and sharing: >>>>> 45: 16836 0 PCI-MSI-edge hda_intel >>>>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>>>> [ 0.290686] pci 0000:00:1b.0: reg 10: [mem 0xe4700000-0xe4703fff 64bit] >>>>> [ 0.290750] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>>>> [ 0.290755] pci 0000:00:1b.0: PME# disabled >>>>> [ 28.827744] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 >>>>> [ 28.827779] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 >>>>> [ 28.827788] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, >>>>> low) -> IRQ 16 >>>>> [ 28.827858] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X >>>>> [ 28.827891] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>>>> >>>>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>>>> a bootup process, but then enabled later. If modem drivers load >>>>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>>>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>>>> if help is needed. >>>>> >>>>> >>>>> === Finished firmware and bootup diagnostics, next deducing cogent software. === >>>>> >>>>> Predictive diagnostics for card in bus 02:06.4: >>>>> Modem chipset detected on >>>>> NAME="Communication controller: Texas Instruments PCIxx12 GemCore >>>>> based SmartCard controller" >>>>> CLASS=0780 >>>>> PCIDEV=104c:803d >>>>> SUBSYS=103c:30ac >>>>> IRQ=11 >>>>> HDA2=00:1b.0 >>>>> HDAchipVendorID=11c1 >>>>> CHIP=0x11c13026 >>>>> IDENT=slmodemd >>>>> SLMODEMD_DEVICE=hw:0,6 >>>>> Driver=snd-hda-intel >>>>> package=agrsm-11c11040 >>>>> >>>>> For candidate modem in: 02:06.4 >>>>> 0780 Communication controller: Texas Instruments PCIxx12 GemCore >>>>> based SmartCard controller >>>>> Primary device ID: 104c:803d >>>>> Support type needed or chipset: slmodemd >>>>> >>>>> >>>>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel >>>>> provides Low Level support enabling contact with the modem hardware. >>>>> For all BUT Conexant chip soft modems (using hsfmodem software) >>>>> complementary High Level support is through a Smartlink utility: slmodemd >>>>> >>>>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>>>> the package SLMODEMD_gcc4.4_alsa1.0.23.tar.gz having a compiled >>>>> slmodemd. Unpack under Linux with: >>>>> $ tar zxf SLMODEMD_gcc4.4_alsa1.0.23.tar.gz >>>>> and read instructions therein. But briefly, the modem is setup with command: >>>>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 >>>>> reporting dynamic creation of ports: >>>>> /dev/ttySL0 --> /dev/pts/N , with N some number >>>>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >>>>> through guidance. >>>>> >>>>> >>>>> Writing DOCs/Intel.txt >>>>> Writing DOCs/Smartlink.txt >>>>> ============ end Smartlink section ===================== >>>>> >>>>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem + >>>>> agrserial driver pair. >>>>> There are a few different chipsets which use this driver pair, but >>>>> they use different code resources: >>>>> Chipsets KV* PackageNames (most current as of November 2009) >>>>> ---------------------------------------------------------------------------------------------- >>>>> 11c1:048c and 11c1:048f 2.6.29 >>>>> agrsm048pci-2.1.60_20100108_i386.deb or >>>>> agrsm048pci-2.1.60_20100108.tar.gz >>>>> 11c1:0620 2.6.31 >>>>> agrsm06pci-2.1.80_20100106_i386.deb or >>>>> agrsm06pci-2.1.80~20100106.tar.gz !! >>>>> 11c11040 (on HDA audio cards) 2.6.31 >>>>> agrsm-11c11040_20091225_i386.deb or >>>>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !! >>>>> All available at: >>>>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>>>> Additionally there are; >>>>> automation & testing agrsm-tools_0.0.1_all.deb or >>>>> agrsm-tools-0.0.1-2.noarch.rpm >>>>> General background agrsm_howto.txt >>>>> ------------------------------------------------------------------------------------------------ >>>>> * KV == latest kernel release with a reported success >>>>> !! Latest update with major credit to Nikolay Zhuravlev >>>>> But see conflict issue: >>>>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html >>>>> For the 11c11040 chip with kernels 2.6.31 and later a change in a >>>>> modules loading settingmay be necessary. >>>>> Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for >>>>> your Distro), change the phrase: >>>>> options snd-hda-intel power_save=10 >>>>> to: >>>>> options snd-hda-intel power_save=0 >>>>> or the agrsm drivers will not function. For Ubuntu related systems >>>>> this can be done with: >>>>> $ sudo gedit /etc/modprobe.d/alsa-base.conf >>>>> >>>>> Report from Bjorn Wielens: >>>>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives >>>>> an error about the module_version symbol. Using: >>>>> # modprobe --force agrmodem >>>>> # modprobe --force agrserial >>>>> is necessary to load the drivers, and does not appear to cause ill effects. >>>>> >>>>> >>>>> All of the above packages are dkms competent. This means that if your >>>>> Linux distros dkms package >>>>> is previously installed, if provides for future updates matching >>>>> forthcoming kernels. >>>>> >>>>> -------------- end Agere Systems section ------------------- >>>>> >>>>> >>>>> Predictive diagnostics for card in bus 00:1b.0: >>>>> Modem chipset not detected on >>>>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition >>>>> Audio Controller " >>>>> CLASS=0403 >>>>> PCIDEV=8086:27d8 >>>>> SUBSYS=103c:30ac >>>>> IRQ=45 >>>>> >>>>> For candidate modem in: 00:1b.0 >>>>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High >>>>> Definition Audio Controller >>>>> Primary device ID: 8086:27d8 >>>>> Support type needed or chipset: >>>>> >>>>> >>>>> Completed candidate modem analyses. >>>>> >>>>> The base of the UDEV device file system is: /dev/.udev >>>>> >>>>> Versions adequately match for the compiler installed: 4.4.5 >>>>> and the compiler used in kernel assembly: 4.4.5 >>>>> >>>>> linux-headers-2.6.35-24-generic resources needed for compiling are >>>>> not manifestly ready! >>>>> >>>>> If compiling is necessary packages must be installed, providing: >>>>> linux-headers-2.6.35-24-generic >>>>> >>>>> >>>>> If a driver compilation fails, with message including some lack of >>>>> some FileName.h (stdio.h for example), then >>>>> Some additional kernel-header files need installation to /usr/include. >>>>> The minimal additional packages are libc6-dev >>>>> and any of its dependents, under Ubuntu linux-libc-dev >>>>> >>>>> If an alternate ethernet connection is available, >>>>> $ apt-get update >>>>> $ apt-get -s install linux-kernel-devel >>>>> will install needed packages. >>>>> For Debian/Ubuntu related distributions, run the following command to >>>>> display the needed package list: >>>>> >>>>> Otherwise packages have to be found through http://packages.ubuntu.com >>>>> Once downloaded and transferred into a Linux partition, >>>>> they can be installed alltogether with: >>>>> $ sudo dpkg -i *.deb >>>>> >>>>> Checking settings of: /etc/ppp/options >>>>> asyncmap 0 >>>>> noauth >>>>> crtscts >>>>> lock >>>>> hide-password >>>>> modem >>>>> proxyarp >>>>> lcp-echo-interval 30 >>>>> lcp-echo-failure 4 >>>>> noipx >>>>> >>>>> In case of a message like: >>>>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>>>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>>>> >>>>> For guidance on FAX usage, get from >>>>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz >>>>> It has samples for a modem using port /dev/ttySL0, which must be >>>>> changed to match your modem's port. >>>>> >>>>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth2 ppp0 >>>>> Which can interfere with Browser naviagation. >>>>> >>>>> Don't worry about the following, it is for experts should trouble >>>>> shooting be necessary. >>>>> ========================================================== >>>>> >>>>> Checking for modem support lines: >>>>> -------------------------------------- >>>>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 >>>>> 2010-12-21 22:43 /dev/modem -> ttySL0 >>>>> slmodemd created symbolic link /dev/ttySL0: lrwxrwxrwx 1 root root 10 >>>>> 2010-12-21 22:43 /dev/ttySL0 -> /dev/pts/2 >>>>> Within /etc/udev/ files: >>>>> >>>>> Within /etc/modprobe.conf files: >>>>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>>>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>>>> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb >>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e >>>>> /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || >>>>> (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout >>>>> /dev/slamr0) >>>>> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb >>>>> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e >>>>> /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) || >>>>> (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout >>>>> /dev/slusb0) >>>>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in >>>>> order to blacklist unwanted modem drivers >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >>>>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >>>>> Within any ancient /etc/devfs files: >>>>> >>>>> Within ancient kernel 2.4.n /etc/module.conf files: >>>>> >>>>> --------- end modem support lines -------- >>>>> >>>>> >>>>> -- >>>>> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m", >>>>> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',( >>>>> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39" >>>>> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz >>>>> >>>> >>> >>> This is ModemData.txt: >>> >>> Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server, >>> as HTML can contain viruses. Use as the email Subject Line: >>> YourName, YourCountry kernel 2.6.35-25-generic >>> With this Subject Line cogent experts will be alerted, and useful >>> case names left in the Archive. >>> YourCountry will enable Country specific guidance. Linux experts in >>> YourCountry >>> can be found through: http://www.linux.org/groups/index.html. >>> They will know your Country's modem code, which may be essential for >>> dialup service. >>> Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an >>> Internet Provider mail filters. >>> So in a day, also check the Archived responses at http://www.linmodems.org >>> -------------------------- System information ---------------------------- >>> CPU=i686, Ubuntu , ALSA_version=1.0.23 >>> Linux version 2.6.35-25-generic (buildd@roseapple) (gcc version 4.4.5 >>> (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #43-Ubuntu SMP Thu Jan 6 22:25:16 >>> UTC 2011 >>> scanModem update of: 2010_12_12 >>> The modem symbolic link is /dev/modem -> ttySL0 >>> Distrib_ID=Ubuntu >>> DistribCodeName=maverick >>> AptRepositoryStem=http://ubuntu.wikimedia.org/ubuntu/ >>> >>> >>> The dkms driver upgrade utilities are installed, >>> >>> There are no blacklisted modem drivers in /etc/modprobe* files >>> >>> Potentially useful modem drivers now loaded are: >>> snd_hda_intel slamr >>> >>> Attached USB devices are: >>> ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor >>> ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface >>> [Integrated Module] >>> If a cellphone is not detected, see >>> http://ubuntuforums.org/archive/index.php/t-878554.html >>> A sample report is: >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html >>> >>> If a USB modem or cellphone is attached and was not detected, please >>> provide available information in your request to discuss@xxxxxxxxxxxxx >>> >>> Candidate PCI devices with modem chips are: >>> 02:06.4 Communication controller: Texas Instruments PCIxx12 GemCore >>> based SmartCard controller >>> 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High >>> Definition Audio Controller (rev 01) >>> High Definition Audio cards can host modem chips. >>> >>> For candidate card in slot 02:06.4, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 02:06.4 104c:803d 103c:30ac Communication controller: Texas >>> Instruments PCIxx12 GemCore based SmartCard controller >>> >>> Modem interrupt assignment and sharing: >>> --- Bootup diagnostics for card in PCI slot 02:06.4 ---- >>> [ 0.287491] pci 0000:02:06.4: reg 10: [mem 0xe420a000-0xe420afff] >>> [ 0.287502] pci 0000:02:06.4: reg 14: [mem 0xe420b000-0xe420bfff] >>> [ 0.287572] pci 0000:02:06.4: supports D1 D2 >>> [ 0.287574] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot >>> [ 0.287580] pci 0000:02:06.4: PME# disabled >>> >>> The PCI slot 02:06.4 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> For candidate card in slot 00:1b.0, firmware information and bootup >>> diagnostics are: >>> PCI slot PCI ID SubsystemID Name >>> ---------- --------- --------- -------------- >>> 00:1b.0 8086:27d8 103c:30ac Audio device: Intel Corporation N10/ICH 7 >>> Family High Definition Audio Controller >>> >>> Modem interrupt assignment and sharing: >>> 45: 1004 0 PCI-MSI-edge hda_intel >>> --- Bootup diagnostics for card in PCI slot 00:1b.0 ---- >>> [ 0.284217] pci 0000:00:1b.0: reg 10: [mem 0xe4700000-0xe4703fff 64bit] >>> [ 0.284281] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold >>> [ 0.284286] pci 0000:00:1b.0: PME# disabled >>> [ 18.824476] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 >>> [ 18.824512] HDA Intel 0000:00:1b.0: power state changed by ACPI to D0 >>> [ 18.824522] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, >>> low) -> IRQ 16 >>> [ 18.824602] HDA Intel 0000:00:1b.0: irq 45 for MSI/MSI-X >>> [ 18.824636] HDA Intel 0000:00:1b.0: setting latency timer to 64 >>> >>> The PCI slot 00:1b.0 of the modem card may be disabled early in >>> a bootup process, but then enabled later. If modem drivers load >>> but the modem is not responsive, read DOCs/Bootup.txt about possible fixes. >>> Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx >>> if help is needed. >>> >>> >>> === Finished firmware and bootup diagnostics, next deducing cogent software. === >>> >>> Predictive diagnostics for card in bus 02:06.4: >>> Modem chipset detected on >>> NAME="Communication controller: Texas Instruments PCIxx12 GemCore >>> based SmartCard controller" >>> CLASS=0780 >>> PCIDEV=104c:803d >>> SUBSYS=103c:30ac >>> IRQ=11 >>> HDA2=00:1b.0 >>> HDAchipVendorID=11c1 >>> CHIP=0x11c13026 >>> IDENT=slmodemd >>> SLMODEMD_DEVICE=hw:0,6 >>> Driver=snd-hda-intel >>> package=agrsm-11c11040 >>> >>> For candidate modem in: 02:06.4 >>> 0780 Communication controller: Texas Instruments PCIxx12 GemCore >>> based SmartCard controller >>> Primary device ID: 104c:803d >>> Support type needed or chipset: slmodemd >>> >>> >>> An ALSA (Advanced Linux Sound Architecture) modem driver: snd-hda-intel >>> provides Low Level support enabling contact with the modem hardware. >>> For all BUT Conexant chip soft modems (using hsfmodem software) >>> complementary High Level support is through a Smartlink utility: slmodemd >>> >>> Download from http://linmodems.technion.ac.il/packages/smartlink/ >>> the package SLMODEMD_gcc4.4_alsa1.0.23.tar.gz having a compiled >>> slmodemd. Unpack under Linux with: >>> $ tar zxf SLMODEMD_gcc4.4_alsa1.0.23.tar.gz >>> and read instructions therein. But briefly, the modem is setup with command: >>> sudo slmodemd -c YOUR_COUNTRY --alsa hw:0,6 >>> reporting dynamic creation of ports: >>> /dev/ttySL0 --> /dev/pts/N , with N some number >>> Read DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow >>> through guidance. >>> >>> >>> Writing DOCs/Intel.txt >>> Writing DOCs/Smartlink.txt >>> ============ end Smartlink section ===================== >>> >>> The AgereSystems/LSI agrsm code supports compiling of a agrmodem + >>> agrserial driver pair. >>> There are a few different chipsets which use this driver pair, but >>> they use different code resources: >>> Chipsets KV* PackageNames (most current as of November 2009) >>> ---------------------------------------------------------------------------------------------- >>> 11c1:048c and 11c1:048f >>> 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or >>> agrsm048pci-2.1.60_20100108.tar.gz >>> 11c1:0620 2.6.31 >>> agrsm06pci-2.1.80_20100106_i386.deb or >>> agrsm06pci-2.1.80~20100106.tar.gz !! >>> 11c11040 (on HDA audio cards) 2.6.31 >>> agrsm-11c11040_20091225_i386.deb or >>> agrsm-11c11040-2.1.80~20091225.tar.bz2 !! >>> All available at: >>> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ >>> Additionally there are; >>> automation & testing agrsm-tools_0.0.1_all.deb or >>> agrsm-tools-0.0.1-2.noarch.rpm >>> General background agrsm_howto.txt >>> ------------------------------------------------------------------------------------------------ >>> * KV == latest kernel release with a reported success >>> !! Latest update with major credit to Nikolay Zhuravlev >>> But see conflict issue: >>> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html >>> For the 11c11040 chip with kernels 2.6.31 and later a change in a >>> modules loading settingmay be necessary. >>> Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for >>> your Distro), change the phrase: >>> options snd-hda-intel power_save=10 >>> to: >>> options snd-hda-intel power_save=0 >>> or the agrsm drivers will not function. For Ubuntu related systems >>> this can be done with: >>> $ sudo gedit /etc/modprobe.d/alsa-base.conf >>> >>> Report from Bjorn Wielens: >>> Please note- trying to load the modules on a OpenSuSE 11.2 system gives >>> an error about the module_version symbol. Using: >>> # modprobe --force agrmodem >>> # modprobe --force agrserial >>> is necessary to load the drivers, and does not appear to cause ill effects. >>> >>> >>> All of the above packages are dkms competent. This means that if your >>> Linux distros dkms package >>> is previously installed, if provides for future updates matching >>> forthcoming kernels. >>> >>> -------------- end Agere Systems section ------------------- >>> >>> >>> Predictive diagnostics for card in bus 00:1b.0: >>> Modem chipset not detected on >>> NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition >>> Audio Controller " >>> CLASS=0403 >>> PCIDEV=8086:27d8 >>> SUBSYS=103c:30ac >>> IRQ=45 >>> >>> For candidate modem in: 00:1b.0 >>> 0403 Audio device: Intel Corporation N10/ICH 7 Family High >>> Definition Audio Controller >>> Primary device ID: 8086:27d8 >>> Support type needed or chipset: >>> >>> >>> Completed candidate modem analyses. >>> >>> The base of the UDEV device file system is: /dev/.udev >>> >>> Versions adequately match for the compiler installed: 4.4.5 >>> and the compiler used in kernel assembly: 4.4.5 >>> >>> linux-headers-2.6.35-25-generic resources needed for compiling are >>> not manifestly ready! >>> >>> If compiling is necessary packages must be installed, providing: >>> linux-headers-2.6.35-25-generic >>> >>> >>> If a driver compilation fails, with message including some lack of >>> some FileName.h (stdio.h for example), then >>> Some additional kernel-header files need installation to /usr/include. >>> The minimal additional packages are libc6-dev >>> and any of its dependents, under Ubuntu linux-libc-dev >>> >>> If an alternate ethernet connection is available, >>> $ apt-get update >>> $ apt-get -s install linux-kernel-devel >>> will install needed packages. >>> For Debian/Ubuntu related distributions, run the following command to >>> display the needed package list: >>> >>> Otherwise packages have to be found through http://packages.ubuntu.com >>> Once downloaded and transferred into a Linux partition, >>> they can be installed alltogether with: >>> $ sudo dpkg -i *.deb >>> >>> >>> Checking pppd properties: >>> -rwsr-xr-- 1 root dip 273248 2010-07-09 11:41 /usr/sbin/pppd >>> >>> In case of an "error 17" "serial loopback" problem, see: >>> http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html >>> >>> To enable dialout without Root permission do: >>> $ su - root (not for Ubuntu) >>> sudo chmod a+x /usr/sbin/pppd >>> or under Ubuntu related Linuxes >>> sudo chmod a+x /usr/sbin/pppd >>> >>> Checking settings of: /etc/ppp/options >>> asyncmap 0 >>> noauth >>> crtscts >>> lock >>> hide-password >>> modem >>> proxyarp >>> lcp-echo-interval 30 >>> lcp-echo-failure 4 >>> noipx >>> >>> In case of a message like: >>> Warning: Could not modify /etc/ppp/pap-secrets: Permission denied >>> see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html >>> >>> For guidance on FAX usage, get from >>> http://linmodems.technion.ac.il/packages/ get faxing.tar.gz >>> It has samples for a modem using port /dev/ttySL0, which must be >>> changed to match your modem's port. >>> >>> Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth2 >>> Which can interfere with Browser naviagation. >>> >>> Don't worry about the following, it is for experts should trouble >>> shooting be necessary. >>> ========================================================== >>> >>> Checking for modem support lines: >>> -------------------------------------- >>> /device/modem symbolic link: lrwxrwxrwx 1 root root 6 >>> 2011-01-23 02:10 /dev/modem -> ttySL0 >>> slmodemd created symbolic link /dev/ttySL0: >>> Within /etc/udev/ files: >>> >>> Within /etc/modprobe.conf files: >>> /etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2 >>> /etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2 >>> /etc/modprobe.d/sl-modem.conf:install slamr /sbin/modprobe -qb >>> ungrab-winmodem; /sbin/modprobe --ignore-install slamr; test -e >>> /dev/slamr0 && (chmod 660 /dev/slamr0 && chgrp dialout /dev/slamr0) || >>> (/bin/mknod -m 660 /dev/slamr0 c 242 0 2>/dev/null && chgrp dialout >>> /dev/slamr0) >>> /etc/modprobe.d/sl-modem.conf:install slusb /sbin/modprobe -qb >>> ungrab-winmodem; /sbin/modprobe --ignore-install slusb; test -e >>> /dev/slusb0 && (chmod 660 /dev/slusb0 && chgrp dialout /dev/slusb0) || >>> (/bin/mknod -m 660 /dev/slusb0 c 243 0 2>/dev/null && chgrp dialout >>> /dev/slusb0) >>> /etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in >>> order to blacklist unwanted modem drivers >>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem >>> /etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem >>> Within any ancient /etc/devfs files: >>> >>> Within ancient kernel 2.4.n /etc/module.conf files: >>> >>> --------- end modem support lines -------- >>> >>> >>> -- >>> $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m", >>> chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',( >>> $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39" >>> ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz >>> >> > > > > -- > $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m", > chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',( > $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39" > ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz > -- $0='!/msfQ0yjoV!fe!sfldbi!psup!pmpT'x19xor print+map{("\e[7m \e[0m", chr ord(chop$0)-1)[$_].("\n")[++$i%72]}split//,unpack'B*',pack'H*',( $P='F'x18)."8186078739E1F0F0E19FCF333319CCE6667383CF0733099E67E7F39" ."FCF3333218067E7F39FCF3333319E6666739F860787399E70F0E1$P"#Perl rulz
