Hi,
My Laptop is a HP Pavilion dv6921la Notebook running Ubuntu 11.04.
I need help with the modem drivers installation, by now the internal
modem is not responding.
Attached please find the ModemData.txt and dmesg.txt
Thank you in advance,
Alvaro Isaza
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.35-22-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010
scanModem update of: 2010_12_12
The modem symbolic link is /dev/modem -> ttySHSF0
Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://co.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
ID 0458:003a KYE Systems Corp. (Mouse Systems) NetScroll+ Mini Traveler
ID 0c45:62c0 Microdia Sonix USB 2.0 Camera
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:07.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:07.0 10de:055c 103c:30cf Audio device: nVidia Corporation MCP67 High Definition Audio
Modem interrupt assignment and sharing:
21: 700 553 IO-APIC-fasteoi hda_intel
--- Bootup diagnostics for card in PCI slot 00:07.0 ----
[ 0.166250] pci 0000:00:07.0: reg 10: [mem 0xf6480000-0xf6483fff]
[ 0.166278] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.166281] pci 0000:00:07.0: PME# disabled
[ 21.983333] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 21.983395] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 22.469201] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
The PCI slot 00:07.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: CONEXANT Analog : CONEXANT Analog : playback 1 : capture 1
00-01: Conexant Digital : Conexant Digital : playback 1
about /proc/asound/cards:
------------------------
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf6480000 irq 21
PCI slot 00:07.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
/lib/modules/2.6.35-24-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.35-22-generic/kernel/sound/pci/hda/snd-hda-intel.ko
/lib/modules/2.6.35-23-generic/kernel/sound/pci/hda/snd-hda-intel.ko
The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 00:07.0:
Modem chipset detected on
NAME="Audio device: nVidia Corporation MCP67 High Definition Audio "
CLASS=0403
PCIDEV=10de:055c
SUBSYS=103c:30cf
IRQ=21
HDA2=00:07.0
SOFT=10de:055c.HDA
IDENT=hsfmodem
Driver=hsfmodem-drivers
For candidate modem in: 00:07.0
0403 Audio device: nVidia Corporation MCP67 High Definition Audio
Primary device ID: 10de:055c
Subsystem PCI_id 103c:30cf
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset: hsfmodem
For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt
Modem support packages from Linuxant include resources for compiling drivers.
If an installer package matching your kernel_version is not provided,
just install a generic code package.
From http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
download hsfmodem-7.80.02.05full_k2.6.35_22_generic_ubuntu_i386.deb.zip
Under Linux unpack with:
$ unzip hsfmodem*.zip
Then install with:
$ sudo dpkg -i hsfmodem*.deb
Subsequently, the modem should be found with
$ sudo wvdialconf /etc/wvdial.conf
Edit in your personal information with:
$ sudo gedit /etc/wvdial.conf
and try dialing out with:
$ sudo wvdial.
See DOCs/Testing.txt for details.
The directions following below need only be pursued, if the above procedures are not adequate.
Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion: 2.6.35_22_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
rpm -i hsf*.rpm
Read DOCs/Conexant.txt
Writing DOCs/Conexant.txt
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.5
and the compiler used in kernel assembly: 4.4.5
linux-headers-2.6.35-22-generic resources needed for compiling are not manifestly ready!
If compiling is necessary packages must be installed, providing:
linux-headers-2.6.35-22-generic
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273248 2010-07-09 11:41 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link: lrwxrwxrwx 1 root root 8 2011-01-08 11:26 /dev/modem -> ttySHSF0
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/00-hsf.rules:KERNEL=="ttySHSF0", SYMLINK="modem"
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/hsf.conflicts.conf:install snd-via82xx-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97via
/etc/modprobe.d/hsf.conflicts.conf:install snd-atiixp-modem /bin/true # temporarily disabled by hsf - conflicts with hsfmc97ati
/etc/modprobe.d/hsf.conf:alias /dev/modem /dev/ttySHSF
/etc/modprobe.d/hsf.conf:install /dev/ttySHSF /sbin/modprobe hsfpcibasic2; /sbin/modprobe hsfpcibasic3; /sbin/modprobe hsfmc97ich; /sbin/modprobe hsfmc97via; /sbin/modprobe hsfmc97ali; /sbin/modprobe hsfmc97ati; /sbin/modprobe hsfmc97sis; [ -e /lib/modules/`uname -r`/extra/hsfusbcd2.ko ] && /sbin/modprobe hsfusbcd2; /sbin/modprobe snd_hda_intel; [ -e /lib/modules/`uname -r`/extra/snd-hda-codec-hsfmodem.ko ] && /sbin/modprobe snd-hda-codec-hsfmodem; /bin/true
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
/etc/modules.conf:alias /dev/modem /dev/ttySHSF
/etc/modules.conf:probeall /dev/ttySHSF hsfpcibasic2 hsfpcibasic3 hsfmc97ich hsfmc97via hsfmc97ali hsfmc97ati hsfmc97sis hsfusbcd2 snd_hda_intel snd-hda-codec-hsfmodem
--------- end modem support lines --------
CPU0 CPU1
0: 3523 250194 IO-APIC-edge timer
1: 333 180 IO-APIC-edge i8042
5: 0 2 IO-APIC-fasteoi firewire_ohci
7: 1 0 IO-APIC-fasteoi mmc0, r852
8: 0 1 IO-APIC-edge rtc0
9: 85 229 IO-APIC-fasteoi acpi
12: 0 137 IO-APIC-edge i8042
14: 24 4792 IO-APIC-edge pata_amd
15: 0 0 IO-APIC-edge pata_amd
16: 0 63550 IO-APIC-fasteoi nvidia
18: 9542 126 IO-APIC-fasteoi ohci_hcd:usb3, ohci_hcd:usb4
19: 23570 929 IO-APIC-fasteoi ath
21: 700 553 IO-APIC-fasteoi hda_intel
22: 0 60 IO-APIC-fasteoi ehci_hcd:usb1, ehci_hcd:usb2
23: 38148 9685 IO-APIC-fasteoi ahci
42: 0 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 166527 42241 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 169618 299410 Rescheduling interrupts
CAL: 1112 1146 Function call interrupts
TLB: 1510 3008 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 4 4 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010 (Ubuntu 2.6.35-22.35-generic 2.6.35.4)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007bf50000 (usable)
[ 0.000000] BIOS-e820: 000000007bf50000 - 000000007bf65000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007bf65000 - 000000007bf66000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007bf66000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x7bf50 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E3FFF uncachable
[ 0.000000] E4000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007bf50000 (usable)
[ 0.000000] modified: 000000007bf50000 - 000000007bf65000 (ACPI data)
[ 0.000000] modified: 000000007bf65000 - 000000007bf66000 (ACPI NVS)
[ 0.000000] modified: 000000007bf66000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] found SMP MP-table at [c00f8220] f8220
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 15000-1a000
[ 0.000000] RAMDISK: 375ae000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 009a5000 - 013e6fb3
[ 0.000000] Move RAMDISK from 00000000375ae000 - 0000000037feffb2 to 009a5000 - 013e6fb2
[ 0.000000] ACPI: RSDP 000f8250 00024 (v02 PTLTD )
[ 0.000000] ACPI: XSDT 7bf5c0ce 0006C (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 7bf649ba 000F4 (v03 NVIDIA MCP67-M 06040000 PTL_ 000F4240)
[ 0.000000] ACPI: DSDT 7bf5c13a 0880C (v01 NVIDIA MCP67 06040000 MSFT 03000000)
[ 0.000000] ACPI: FACS 7bf65fc0 00040
[ 0.000000] ACPI: TCPA 7bf64aae 00032 (v01 Phoeni x 06040000 TL 00000000)
[ 0.000000] ACPI: SRAT 7bf64ae0 000A0 (v01 AMD HAMMER 06040000 AMD 00000001)
[ 0.000000] ACPI: SSDT 7bf64b80 00206 (v01 PTLTD POWERNOW 06040000 LTP 00000001)
[ 0.000000] ACPI: MCFG 7bf64d86 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
[ 0.000000] ACPI: HPET 7bf64dc2 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001)
[ 0.000000] ACPI: APIC 7bf64dfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 7bf64e62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 7bf64e8a 00176 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bf50
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007bf50
[ 0.000000] On node 0 totalpages: 507615
[ 0.000000] free_area_init_node: node 0, pgdat c07ffd40, node_mem_map c13e8020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2191 pages used for memmap
[ 0.000000] HighMem zone: 278211 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36416 r0 d20928 u2097152
[ 0.000000] pcpu-alloc: s36416 r0 d20928 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 503648
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-22-generic root=UUID=14667f86-7851-48bc-bea3-e6cf3efd757d ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10154540 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (51 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009a0adc] TEXT DATA BSS
[ 0.000000] #3 [00009a1000 - 00009a4150] BRK
[ 0.000000] #4 [00000f8230 - 0000100000] BIOS reserved
[ 0.000000] #5 [00000f8220 - 00000f8230] MP-table mpf
[ 0.000000] #6 [000009e000 - 000009e571] BIOS reserved
[ 0.000000] #7 [000009e69d - 00000f8220] BIOS reserved
[ 0.000000] #8 [000009e571 - 000009e69d] MP-table mpc
[ 0.000000] #9 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #10 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #11 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #12 [00009a5000 - 00013e7000] NEW RAMDISK
[ 0.000000] #13 [00013e7000 - 00013e8000] BOOTMEM
[ 0.000000] #14 [00013e8000 - 0002368000] BOOTMEM
[ 0.000000] #15 [0002368000 - 0002368004] BOOTMEM
[ 0.000000] #16 [0002368040 - 0002368100] BOOTMEM
[ 0.000000] #17 [0002368100 - 0002368154] BOOTMEM
[ 0.000000] #18 [0002368180 - 000236b180] BOOTMEM
[ 0.000000] #19 [000236b180 - 000236b1e8] BOOTMEM
[ 0.000000] #20 [000236b200 - 0002371200] BOOTMEM
[ 0.000000] #21 [0002371200 - 0002371225] BOOTMEM
[ 0.000000] #22 [0002371240 - 0002371267] BOOTMEM
[ 0.000000] #23 [0002371280 - 0002371408] BOOTMEM
[ 0.000000] #24 [0002371440 - 0002371480] BOOTMEM
[ 0.000000] #25 [0002371480 - 00023714c0] BOOTMEM
[ 0.000000] #26 [00023714c0 - 0002371500] BOOTMEM
[ 0.000000] #27 [0002371500 - 0002371540] BOOTMEM
[ 0.000000] #28 [0002371540 - 0002371580] BOOTMEM
[ 0.000000] #29 [0002371580 - 00023715c0] BOOTMEM
[ 0.000000] #30 [00023715c0 - 0002371600] BOOTMEM
[ 0.000000] #31 [0002371600 - 0002371640] BOOTMEM
[ 0.000000] #32 [0002371640 - 0002371680] BOOTMEM
[ 0.000000] #33 [0002371680 - 00023716c0] BOOTMEM
[ 0.000000] #34 [00023716c0 - 0002371700] BOOTMEM
[ 0.000000] #35 [0002371700 - 0002371710] BOOTMEM
[ 0.000000] #36 [0002371740 - 0002371750] BOOTMEM
[ 0.000000] #37 [0002371780 - 00023717ea] BOOTMEM
[ 0.000000] #38 [0002371800 - 000237186a] BOOTMEM
[ 0.000000] #39 [0002400000 - 000240e000] BOOTMEM
[ 0.000000] #40 [0002600000 - 000260e000] BOOTMEM
[ 0.000000] #41 [0002373880 - 0002373884] BOOTMEM
[ 0.000000] #42 [00023738c0 - 00023738c4] BOOTMEM
[ 0.000000] #43 [0002373900 - 0002373908] BOOTMEM
[ 0.000000] #44 [0002373940 - 0002373948] BOOTMEM
[ 0.000000] #45 [0002373980 - 0002373a28] BOOTMEM
[ 0.000000] #46 [0002373a40 - 0002373aa8] BOOTMEM
[ 0.000000] #47 [0002373ac0 - 0002377ac0] BOOTMEM
[ 0.000000] #48 [0002377ac0 - 00023f7ac0] BOOTMEM
[ 0.000000] #49 [000240e000 - 000244e000] BOOTMEM
[ 0.000000] #50 [000260e000 - 0002fbd22c] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf50)
[ 0.000000] Memory: 1984340k/2030912k available (4928k kernel code, 46120k reserved, 2336k data, 684k init, 1121608k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc0819000 - 0xc08c4000 ( 684 kB)
[ 0.000000] .data : 0xc05d030e - 0xc0818668 (2336 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05d030e (4928 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1999.935 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.87 BogoMIPS (lpj=7999740)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004036] Security Framework initialized
[ 0.004059] AppArmor: AppArmor initialized
[ 0.004062] Yama: becoming mindful.
[ 0.004133] Mount-cache hash table entries: 512
[ 0.004286] Initializing cgroup subsys ns
[ 0.004291] Initializing cgroup subsys cpuacct
[ 0.004297] Initializing cgroup subsys memory
[ 0.004309] Initializing cgroup subsys devices
[ 0.004313] Initializing cgroup subsys freezer
[ 0.004316] Initializing cgroup subsys net_cls
[ 0.004345] CPU: Physical Processor ID: 0
[ 0.004348] CPU: Processor Core ID: 0
[ 0.004352] mce: CPU supports 5 MCE banks
[ 0.004363] using C1E aware idle routine
[ 0.004372] Performance Events: AMD PMU driver.
[ 0.004381] ... version: 0
[ 0.004384] ... bit width: 48
[ 0.004387] ... generic registers: 4
[ 0.004390] ... value mask: 0000ffffffffffff
[ 0.004393] ... max period: 00007fffffffffff
[ 0.004396] ... fixed-purpose events: 0
[ 0.004399] ... event mask: 000000000000000f
[ 0.008833] ACPI: Core revision 20100428
[ 0.020012] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.020019] ftrace: allocating 21758 entries in 43 pages
[ 0.024082] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.065108] CPU0: AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping 02
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.152105] Brought up 2 CPUs
[ 0.152108] Total of 2 processors activated (8000.26 BogoMIPS).
[ 0.152103] System has AMD C1E enabled
[ 0.152103] Switch to broadcast mode on CPU1
[ 0.152386] Switch to broadcast mode on CPU0
[ 0.152386] devtmpfs: initialized
[ 0.153083] regulator: core version 0.5
[ 0.153122] Time: 11:17:08 Date: 01/08/11
[ 0.153170] NET: Registered protocol family 16
[ 0.153307] EISA bus registered
[ 0.153312] node 0 link 0: io port [1000, fffff]
[ 0.153317] TOM: 0000000080000000 aka 2048M
[ 0.153321] node 0 link 0: mmio [a0000, bffff]
[ 0.153324] node 0 link 0: mmio [80000000, dfffffff]
[ 0.153327] node 0 link 0: mmio [e0000000, efffffff]
[ 0.153331] node 0 link 0: mmio [f0000000, fe0bffff]
[ 0.153334] bus: [00, ff] on node 0 link 0
[ 0.153337] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.153341] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.153343] bus: 00 index 2 [mem 0x80000000-0xffffffff]
[ 0.153351] ACPI: bus type pci registered
[ 0.153430] PCI: MMCONFIG for domain 0000 [bus 00-04] at [mem 0xe0000000-0xe04fffff] (base 0xe0000000)
[ 0.153434] PCI: MMCONFIG at [mem 0xe0000000-0xe04fffff] reserved in E820
[ 0.153436] PCI: Using MMCONFIG for extended config space
[ 0.153439] PCI: Using configuration type 1 for base access
[ 0.154511] Trying to unpack rootfs image as initramfs...
[ 0.154511] bio: create slab <bio-0> at 0
[ 0.154511] ACPI: EC: Look up EC in DSDT
[ 0.155920] ACPI: BIOS _OSI(Linux) query ignored
[ 0.156823] ACPI: Interpreter enabled
[ 0.156826] ACPI: (supports S0 S3 S4 S5)
[ 0.156847] ACPI: Using IOAPIC for interrupt routing
[ 0.164669] ACPI: EC: GPE = 0x10, I/O: command/status = 0x66, data = 0x62
[ 0.165072] ACPI: No dock devices found.
[ 0.165076] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165318] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165580] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.165583] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.165586] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.165589] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.165592] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.165595] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.165599] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000cf3ff]
[ 0.165604] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000d0000-0x000d3fff] conflicts with Adapter ROM [mem 0x000cf800-0x000d0fff]
[ 0.165608] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.165611] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.165614] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.165617] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.165620] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.165623] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.165626] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.165629] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.165633] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[ 0.165636] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff]
[ 0.165816] pci 0000:00:01.1: reg 10: [io 0x3080-0x30bf]
[ 0.165827] pci 0000:00:01.1: reg 20: [io 0x3040-0x307f]
[ 0.165832] pci 0000:00:01.1: reg 24: [io 0x3000-0x303f]
[ 0.165851] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.165857] pci 0000:00:01.1: PME# disabled
[ 0.165912] pci 0000:00:01.3: reg 10: [mem 0xf6200000-0xf627ffff]
[ 0.165990] pci 0000:00:02.0: reg 10: [mem 0xf6486000-0xf6486fff]
[ 0.166013] pci 0000:00:02.0: supports D1 D2
[ 0.166016] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166019] pci 0000:00:02.0: PME# disabled
[ 0.166039] pci 0000:00:02.1: reg 10: [mem 0xf6489000-0xf64890ff]
[ 0.166067] pci 0000:00:02.1: supports D1 D2
[ 0.166070] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166073] pci 0000:00:02.1: PME# disabled
[ 0.166098] pci 0000:00:04.0: reg 10: [mem 0xf6487000-0xf6487fff]
[ 0.166122] pci 0000:00:04.0: supports D1 D2
[ 0.166124] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166128] pci 0000:00:04.0: PME# disabled
[ 0.166148] pci 0000:00:04.1: reg 10: [mem 0xf6489400-0xf64894ff]
[ 0.166176] pci 0000:00:04.1: supports D1 D2
[ 0.166178] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166182] pci 0000:00:04.1: PME# disabled
[ 0.166215] pci 0000:00:06.0: reg 20: [io 0x30c0-0x30cf]
[ 0.166250] pci 0000:00:07.0: reg 10: [mem 0xf6480000-0xf6483fff]
[ 0.166278] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 0.166281] pci 0000:00:07.0: PME# disabled
[ 0.166340] pci 0000:00:09.0: reg 10: [io 0x30f0-0x30f7]
[ 0.166344] pci 0000:00:09.0: reg 14: [io 0x30e4-0x30e7]
[ 0.166348] pci 0000:00:09.0: reg 18: [io 0x30e8-0x30ef]
[ 0.166352] pci 0000:00:09.0: reg 1c: [io 0x30e0-0x30e3]
[ 0.166357] pci 0000:00:09.0: reg 20: [io 0x30d0-0x30df]
[ 0.166361] pci 0000:00:09.0: reg 24: [mem 0xf6484000-0xf6485fff]
[ 0.166404] pci 0000:00:0a.0: reg 10: [mem 0xf6488000-0xf6488fff]
[ 0.166408] pci 0000:00:0a.0: reg 14: [io 0x30f8-0x30ff]
[ 0.166413] pci 0000:00:0a.0: reg 18: [mem 0xf6489c00-0xf6489cff]
[ 0.166417] pci 0000:00:0a.0: reg 1c: [mem 0xf6489800-0xf648980f]
[ 0.166439] pci 0000:00:0a.0: supports D1 D2
[ 0.166441] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166446] pci 0000:00:0a.0: PME# disabled
[ 0.166484] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166487] pci 0000:00:0c.0: PME# disabled
[ 0.166521] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166524] pci 0000:00:0d.0: PME# disabled
[ 0.166546] pci 0000:00:12.0: reg 10: [mem 0xf5000000-0xf5ffffff]
[ 0.166552] pci 0000:00:12.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.166558] pci 0000:00:12.0: reg 1c: [mem 0xf4000000-0xf4ffffff 64bit]
[ 0.166564] pci 0000:00:12.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.166688] pci 0000:02:05.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.166691] pci 0000:02:05.0: MMC cards are now supported by standard SDHCI controller
[ 0.166699] pci 0000:02:05.0: reg 10: [mem 0x00000000-0x000007ff]
[ 0.166733] pci 0000:02:05.0: supports D1 D2
[ 0.166735] pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166739] pci 0000:02:05.0: PME# disabled
[ 0.166762] pci 0000:02:05.1: reg 10: [mem 0xf6100800-0xf61008ff]
[ 0.166795] pci 0000:02:05.1: supports D1 D2
[ 0.166797] pci 0000:02:05.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166801] pci 0000:02:05.1: PME# disabled
[ 0.166824] pci 0000:02:05.2: reg 10: [mem 0xf6101000-0xf61010ff]
[ 0.166857] pci 0000:02:05.2: supports D1 D2
[ 0.166859] pci 0000:02:05.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166863] pci 0000:02:05.2: PME# disabled
[ 0.166886] pci 0000:02:05.3: reg 10: [mem 0xf6101400-0xf61014ff]
[ 0.166919] pci 0000:02:05.3: supports D1 D2
[ 0.166921] pci 0000:02:05.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.166925] pci 0000:02:05.3: PME# disabled
[ 0.166959] pci 0000:00:08.0: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.166963] pci 0000:00:08.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.166968] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff]
[ 0.166972] pci 0000:00:08.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.166975] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.166978] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.166981] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.166984] pci 0000:00:08.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.166988] pci 0000:00:08.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.166991] pci 0000:00:08.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.166994] pci 0000:00:08.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.166997] pci 0000:00:08.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.167000] pci 0000:00:08.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.167004] pci 0000:00:08.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.167007] pci 0000:00:08.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.167010] pci 0000:00:08.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.167013] pci 0000:00:08.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.167016] pci 0000:00:08.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.167020] pci 0000:00:08.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
[ 0.167023] pci 0000:00:08.0: bridge window [mem 0x80000000-0xfebfffff] (subtractive decode)
[ 0.167048] pci 0000:00:0c.0: PCI bridge to [bus 04-05]
[ 0.167052] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
[ 0.167055] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.167060] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.167106] pci 0000:03:00.0: reg 10: [mem 0xf6000000-0xf600ffff 64bit]
[ 0.167165] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.167174] pci 0000:00:0d.0: PCI bridge to [bus 03-03]
[ 0.167178] pci 0000:00:0d.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.167181] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff]
[ 0.167185] pci 0000:00:0d.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.167194] pci_bus 0000:00: on NUMA node 0
[ 0.167199] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.167302] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 0.167326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR1._PRT]
[ 0.167363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
[ 0.201281] ACPI: PCI Interrupt Link [LNK1] (IRQs 5) *10
[ 0.201468] ACPI: PCI Interrupt Link [LNK2] (IRQs 7) *11
[ 0.201655] ACPI: PCI Interrupt Link [LNK3] (IRQs 10) *0, disabled.
[ 0.201841] ACPI: PCI Interrupt Link [LNK4] (IRQs 11) *0, disabled.
[ 0.202028] ACPI: PCI Interrupt Link [LK1E] (IRQs 16) *0, disabled.
[ 0.202215] ACPI: PCI Interrupt Link [LK2E] (IRQs 17) *0, disabled.
[ 0.202402] ACPI: PCI Interrupt Link [LK3E] (IRQs 18) *0, disabled.
[ 0.202590] ACPI: PCI Interrupt Link [LK4E] (IRQs 19) *10
[ 0.202778] ACPI: PCI Interrupt Link [LSMB] (IRQs *10)
[ 0.202965] ACPI: PCI Interrupt Link [LUS0] (IRQs 18) *11
[ 0.203156] ACPI: PCI Interrupt Link [LUS2] (IRQs 22) *7
[ 0.203348] ACPI: PCI Interrupt Link [LMAC] (IRQs 20) *11
[ 0.203533] ACPI: PCI Interrupt Link [LAZA] (IRQs 21) *10
[ 0.203719] ACPI: PCI Interrupt Link [LGPU] (IRQs 16) *10
[ 0.203905] ACPI: PCI Interrupt Link [LPID] (IRQs 22) *0, disabled.
[ 0.204099] ACPI: PCI Interrupt Link [LSI0] (IRQs 23) *11
[ 0.204285] ACPI: PCI Interrupt Link [Z018] (IRQs 18) *5
[ 0.204484] ACPI: PCI Interrupt Link [Z019] (IRQs 22) *10
[ 0.204675] ACPI: PCI Interrupt Link [LPMU] (IRQs *11)
[ 0.204726] HEST: Table is not found!
[ 0.204828] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.204836] vgaarb: loaded
[ 0.205014] SCSI subsystem initialized
[ 0.212211] libata version 3.00 loaded.
[ 0.212211] usbcore: registered new interface driver usbfs
[ 0.212211] usbcore: registered new interface driver hub
[ 0.212211] usbcore: registered new device driver usb
[ 0.212420] ACPI: WMI: Mapper loaded
[ 0.212422] PCI: Using ACPI for IRQ routing
[ 0.212425] PCI: pci_cache_line_size set to 64 bytes
[ 0.212518] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.212521] reserve RAM buffer: 000000000009e000 - 000000000009ffff
[ 0.212524] reserve RAM buffer: 000000007bf50000 - 000000007bffffff
[ 0.212628] NetLabel: Initializing
[ 0.212630] NetLabel: domain hash size = 128
[ 0.212632] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.212645] NetLabel: unlabeled traffic allowed by default
[ 0.212681] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.212688] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 0.212694] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.216365] Switching to clocksource hpet
[ 0.230216] AppArmor: AppArmor Filesystem Enabled
[ 0.230234] pnp: PnP ACPI init
[ 0.230257] ACPI: bus type pnp registered
[ 0.233344] pnp: PnP ACPI: found 12 devices
[ 0.233347] ACPI: ACPI bus type pnp unregistered
[ 0.233350] PnPBIOS: Disabled by ACPI PNP
[ 0.233364] system 00:02: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.233370] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.233373] system 00:03: [io 0x1080-0x10ff] has been reserved
[ 0.233376] system 00:03: [io 0x1400-0x147f] has been reserved
[ 0.233379] system 00:03: [io 0x1480-0x14ff] has been reserved
[ 0.233382] system 00:03: [io 0x1800-0x187f] has been reserved
[ 0.233386] system 00:03: [io 0x1880-0x18ff] has been reserved
[ 0.233392] system 00:04: [io 0x0360-0x0361] has been reserved
[ 0.233395] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.233402] system 00:0b: [mem 0xffc00000-0xffffffff] could not be reserved
[ 0.233406] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.233410] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.233413] system 00:0b: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.233416] system 00:0b: [mem 0xfef00000-0xfef00fff] has been reserved
[ 0.269523] pci 0000:00:12.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref]
[ 0.269528] pci 0000:02:05.0: BAR 0: assigned [mem 0xf6100000-0xf61007ff]
[ 0.269533] pci 0000:02:05.0: BAR 0: set to [mem 0xf6100000-0xf61007ff] (PCI address [0xf6100000-0xf61007ff]
[ 0.269537] pci 0000:00:08.0: PCI bridge to [bus 02-02]
[ 0.269540] pci 0000:00:08.0: bridge window [io disabled]
[ 0.269544] pci 0000:00:08.0: bridge window [mem 0xf6100000-0xf61fffff]
[ 0.269547] pci 0000:00:08.0: bridge window [mem pref disabled]
[ 0.269552] pci 0000:00:0c.0: PCI bridge to [bus 04-05]
[ 0.269555] pci 0000:00:0c.0: bridge window [io 0x4000-0x4fff]
[ 0.269559] pci 0000:00:0c.0: bridge window [mem 0xf2000000-0xf3ffffff]
[ 0.269562] pci 0000:00:0c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.269567] pci 0000:00:0d.0: PCI bridge to [bus 03-03]
[ 0.269569] pci 0000:00:0d.0: bridge window [io disabled]
[ 0.269573] pci 0000:00:0d.0: bridge window [mem 0xf6000000-0xf60fffff]
[ 0.269575] pci 0000:00:0d.0: bridge window [mem pref disabled]
[ 0.269585] pci 0000:00:08.0: setting latency timer to 64
[ 0.269591] pci 0000:00:0c.0: setting latency timer to 64
[ 0.269597] pci 0000:00:0d.0: setting latency timer to 64
[ 0.269601] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.269604] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.269607] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.269610] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.269613] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.269616] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.269619] pci_bus 0000:00: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.269622] pci_bus 0000:00: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.269625] pci_bus 0000:00: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.269628] pci_bus 0000:00: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.269631] pci_bus 0000:00: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.269633] pci_bus 0000:00: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.269636] pci_bus 0000:00: resource 16 [mem 0x000ec000-0x000effff]
[ 0.269639] pci_bus 0000:00: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.269642] pci_bus 0000:00: resource 18 [mem 0xfed40000-0xfed44fff]
[ 0.269645] pci_bus 0000:00: resource 19 [mem 0x80000000-0xfebfffff]
[ 0.269648] pci_bus 0000:02: resource 1 [mem 0xf6100000-0xf61fffff]
[ 0.269651] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.269654] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.269657] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.269660] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.269663] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.269666] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.269668] pci_bus 0000:02: resource 10 [mem 0x000d4000-0x000d7fff]
[ 0.269671] pci_bus 0000:02: resource 11 [mem 0x000d8000-0x000dbfff]
[ 0.269674] pci_bus 0000:02: resource 12 [mem 0x000dc000-0x000dffff]
[ 0.269677] pci_bus 0000:02: resource 13 [mem 0x000e0000-0x000e3fff]
[ 0.269680] pci_bus 0000:02: resource 14 [mem 0x000e4000-0x000e7fff]
[ 0.269683] pci_bus 0000:02: resource 15 [mem 0x000e8000-0x000ebfff]
[ 0.269686] pci_bus 0000:02: resource 16 [mem 0x000ec000-0x000effff]
[ 0.269689] pci_bus 0000:02: resource 17 [mem 0x000f0000-0x000fffff]
[ 0.269692] pci_bus 0000:02: resource 18 [mem 0xfed40000-0xfed44fff]
[ 0.269695] pci_bus 0000:02: resource 19 [mem 0x80000000-0xfebfffff]
[ 0.269698] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.269701] pci_bus 0000:04: resource 1 [mem 0xf2000000-0xf3ffffff]
[ 0.269704] pci_bus 0000:04: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.269707] pci_bus 0000:03: resource 1 [mem 0xf6000000-0xf60fffff]
[ 0.269749] NET: Registered protocol family 2
[ 0.269814] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.270109] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.270755] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.271063] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.271066] TCP reno registered
[ 0.271070] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.271082] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.271184] NET: Registered protocol family 1
[ 0.271351] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271405] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271463] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271528] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271596] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271669] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.271675] pci 0000:00:12.0: Boot video device
[ 0.271695] PCI: CLS 64 bytes, default 64
[ 0.271725] Simple Boot Flag at 0x36 set to 0x1
[ 0.271946] cpufreq-nforce2: No nForce2 chipset.
[ 0.271980] Scanning for low memory corruption every 60 seconds
[ 0.272149] audit: initializing netlink socket (disabled)
[ 0.272160] type=2000 audit(1294485427.268:1): initialized
[ 0.283598] highmem bounce pool size: 64 pages
[ 0.283603] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.285204] VFS: Disk quotas dquot_6.5.2
[ 0.285270] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.285901] fuse init (API version 7.14)
[ 0.285997] msgmni has been set to 1685
[ 0.286399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.286403] io scheduler noop registered
[ 0.286405] io scheduler deadline registered
[ 0.286418] io scheduler cfq registered (default)
[ 0.286549] pcieport 0000:00:0c.0: setting latency timer to 64
[ 0.286570] alloc irq_desc for 40 on node -1
[ 0.286572] alloc kstat_irqs on node -1
[ 0.286583] pcieport 0000:00:0c.0: irq 40 for MSI/MSI-X
[ 0.286633] pcieport 0000:00:0d.0: setting latency timer to 64
[ 0.286649] alloc irq_desc for 41 on node -1
[ 0.286651] alloc kstat_irqs on node -1
[ 0.286656] pcieport 0000:00:0d.0: irq 41 for MSI/MSI-X
[ 0.286727] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.286753] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.287387] ACPI: AC Adapter [ACAD] (on-line)
[ 0.287478] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.287485] ACPI: Sleep Button [SLPB]
[ 0.287529] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.287829] ACPI: Lid Switch [LID]
[ 0.287891] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 0.287895] ACPI: Power Button [PWRB]
[ 0.287946] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.287949] ACPI: Power Button [PWRF]
[ 0.288257] ACPI: acpi_idle registered with cpuidle
[ 0.288633] ACPI: processor limited to max C-state 1
[ 0.291807] [Firmware Bug]: Invalid critical threshold (0)
[ 0.292342] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.292350] ACPI: Thermal Zone [THRM] (63 C)
[ 0.292438] ERST: Table is not found!
[ 0.292726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.294190] brd: module loaded
[ 0.294735] loop: module loaded
[ 0.295020] pata_acpi 0000:00:06.0: setting latency timer to 64
[ 0.295366] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 23
[ 0.295372] alloc irq_desc for 23 on node -1
[ 0.295375] alloc kstat_irqs on node -1
[ 0.295386] pata_acpi 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 0.295403] pata_acpi 0000:00:09.0: setting latency timer to 64
[ 0.295410] pata_acpi 0000:00:09.0: PCI INT A disabled
[ 0.295768] Fixed MDIO Bus: probed
[ 0.295805] PPP generic driver version 2.4.2
[ 0.295851] tun: Universal TUN/TAP device driver, 1.6
[ 0.295853] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.295942] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.296240] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
[ 0.296243] alloc irq_desc for 22 on node -1
[ 0.296245] alloc kstat_irqs on node -1
[ 0.296253] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUS2] -> GSI 22 (level, low) -> IRQ 22
[ 0.296274] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.296278] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.296317] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.296344] ehci_hcd 0000:00:02.1: debug port 1
[ 0.296352] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.296376] ehci_hcd 0000:00:02.1: irq 22, io mem 0xf6489000
[ 0.300225] isapnp: Scanning for PnP cards...
[ 0.305783] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.305913] hub 1-0:1.0: USB hub found
[ 0.305918] hub 1-0:1.0: 7 ports detected
[ 0.306276] ACPI: PCI Interrupt Link [Z019] enabled at IRQ 22
[ 0.306280] ehci_hcd 0000:00:04.1: PCI INT B -> Link[Z019] -> GSI 22 (level, low) -> IRQ 22
[ 0.306292] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.306295] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.306330] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[ 0.306355] ehci_hcd 0000:00:04.1: debug port 1
[ 0.306362] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[ 0.306369] ehci_hcd 0000:00:04.1: irq 22, io mem 0xf6489400
[ 0.349811] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.349918] hub 2-0:1.0: USB hub found
[ 0.349923] hub 2-0:1.0: 2 ports detected
[ 0.349989] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.350279] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 18
[ 0.350282] alloc irq_desc for 18 on node -1
[ 0.350284] alloc kstat_irqs on node -1
[ 0.350293] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUS0] -> GSI 18 (level, low) -> IRQ 18
[ 0.350303] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.350306] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.350349] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[ 0.350376] ohci_hcd 0000:00:02.0: irq 18, io mem 0xf6486000
[ 0.414346] hub 3-0:1.0: USB hub found
[ 0.414354] hub 3-0:1.0: 7 ports detected
[ 0.414796] ACPI: PCI Interrupt Link [Z018] enabled at IRQ 18
[ 0.414802] ohci_hcd 0000:00:04.0: PCI INT A -> Link[Z018] -> GSI 18 (level, low) -> IRQ 18
[ 0.414826] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.414829] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.414873] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 0.414892] ohci_hcd 0000:00:04.0: irq 18, io mem 0xf6487000
[ 0.465449] Freeing initrd memory: 10504k freed
[ 0.474193] hub 4-0:1.0: USB hub found
[ 0.474200] hub 4-0:1.0: 2 ports detected
[ 0.474284] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.474388] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 0.496971] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.496979] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.497054] mice: PS/2 mouse device common for all mice
[ 0.497228] rtc_cmos 00:07: RTC can wake from S4
[ 0.497276] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.497315] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 0.497426] device-mapper: uevent: version 1.0.3
[ 0.497559] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@xxxxxxxxxx
[ 0.498407] device-mapper: multipath: version 1.1.1 loaded
[ 0.498410] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.498536] EISA: Probing bus 0 at eisa.0
[ 0.498539] EISA: Cannot allocate resource for mainboard
[ 0.498542] Cannot allocate resource for EISA slot 1
[ 0.498544] Cannot allocate resource for EISA slot 2
[ 0.498547] Cannot allocate resource for EISA slot 3
[ 0.498549] Cannot allocate resource for EISA slot 4
[ 0.498552] Cannot allocate resource for EISA slot 5
[ 0.498554] Cannot allocate resource for EISA slot 6
[ 0.498556] Cannot allocate resource for EISA slot 7
[ 0.498559] Cannot allocate resource for EISA slot 8
[ 0.498561] EISA: Detected 0 cards.
[ 0.498641] cpuidle: using governor ladder
[ 0.498644] cpuidle: using governor menu
[ 0.498965] TCP cubic registered
[ 0.499108] NET: Registered protocol family 10
[ 0.499501] lo: Disabled Privacy Extensions
[ 0.499792] NET: Registered protocol family 17
[ 0.499825] powernow-k8: Found 1 AMD Turion(tm) 64 X2 Mobile Technology TL-60 (2 cpu cores) (version 2.20.00)
[ 0.499875] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x12
[ 0.499878] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x13
[ 0.499880] powernow-k8: 2 : fid 0x8 (1600 MHz), vid 0x14
[ 0.499883] powernow-k8: 3 : fid 0x0 (800 MHz), vid 0x1e
[ 0.499925] Using IPI No-Shortcut mode
[ 0.500036] PM: Resume from disk failed.
[ 0.500049] registered taskstats version 1
[ 0.500315] Magic number: 11:453:276
[ 0.500352] tty tty13: hash matches
[ 0.500429] rtc_cmos 00:07: setting system clock to 2011-01-08 11:17:08 UTC (1294485428)
[ 0.500432] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.500434] EDD information not available.
[ 0.517298] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.568365] ACPI: Battery Slot [BAT0] (battery present)
[ 0.654254] isapnp: No Plug & Play device found
[ 0.654274] Freeing unused kernel memory: 684k freed
[ 0.654779] Write protecting the kernel text: 4932k
[ 0.654819] Write protecting the kernel read-only data: 1976k
[ 0.674638] udev[76]: starting version 163
[ 0.755553] pata_amd 0000:00:06.0: version 0.4.1
[ 0.755604] pata_amd 0000:00:06.0: setting latency timer to 64
[ 0.779458] scsi0 : pata_amd
[ 0.794449] sdhci: Secure Digital Host Controller Interface driver
[ 0.794453] sdhci: Copyright(c) Pierre Ossman
[ 0.798476] scsi1 : pata_amd
[ 0.798872] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x30c0 irq 14
[ 0.798876] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x30c8 irq 15
[ 0.798929] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.799235] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 20
[ 0.799240] alloc irq_desc for 20 on node -1
[ 0.799243] alloc kstat_irqs on node -1
[ 0.799253] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 20 (level, low) -> IRQ 20
[ 0.799259] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 0.832661] sdhci-pci 0000:02:05.1: SDHCI controller found [1180:0822] (rev 22)
[ 0.833318] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 7
[ 0.833332] sdhci-pci 0000:02:05.1: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 0.834362] sdhci-pci 0000:02:05.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.835418] Registered led device: mmc0::
[ 0.851791] mmc0: SDHCI controller on PCI [0000:02:05.1] using DMA
[ 0.976331] ata1.00: ATAPI: PIONEER DVDRW DR-KD08HB, 1K09, max MWDMA2
[ 0.976359] ata1: nv_mode_filter: 0x39f&0x739f->0x39f, BIOS=0x0 (0xc600) ACPI=0x39f (120:600:0x12)
[ 1.008273] ata1.00: configured for MWDMA2
[ 1.036026] usb 3-4: new low speed USB device using ohci_hcd and address 2
[ 1.103140] scsi 0:0:0:0: CD-ROM PIONEER DVDRW DR-KD08HB 1K09 PQ: 0 ANSI: 5
[ 1.227265] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.227269] Uniform CD-ROM driver Revision: 3.20
[ 1.227387] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.227459] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.227616] ata2: port disabled. ignoring.
[ 1.233496] firewire_ohci 0000:02:05.0: enabling device (0100 -> 0102)
[ 1.233849] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 5
[ 1.233864] firewire_ohci 0000:02:05.0: PCI INT A -> Link[LNK1] -> GSI 5 (level, low) -> IRQ 5
[ 1.267933] usbcore: registered new interface driver hiddev
[ 1.273750] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-4/3-4:1.0/input/input5
[ 1.273871] generic-usb 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:02.0-4/input0
[ 1.273892] usbcore: registered new interface driver usbhid
[ 1.273894] usbhid: USB HID core driver
[ 1.317020] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1e:68:82:1b:5b
[ 1.317025] forcedeth 0000:00:0a.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 1.317054] ahci 0000:00:09.0: version 3.0
[ 1.317070] ahci 0000:00:09.0: PCI INT A -> Link[LSI0] -> GSI 23 (level, low) -> IRQ 23
[ 1.317107] ahci 0000:00:09.0: controller can do NCQ, turning on CAP_NCQ
[ 1.317110] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 1.317175] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
[ 1.317179] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio slum part
[ 1.317185] ahci 0000:00:09.0: setting latency timer to 64
[ 1.317888] scsi2 : ahci
[ 1.318009] scsi3 : ahci
[ 1.318120] scsi4 : ahci
[ 1.318242] scsi5 : ahci
[ 1.318383] ata3: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 23
[ 1.318387] ata4: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484180 irq 23
[ 1.318391] ata5: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484200 irq 23
[ 1.318394] ata6: SATA max UDMA/133 abar m8192@0xf6484000 port 0xf6484280 irq 23
[ 1.369025] firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x0
[ 1.556026] usb 3-7: new full speed USB device using ohci_hcd and address 3
[ 1.636031] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.636054] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.637030] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.860122] firewire_core: created device fw0: GUID 00241b009cd90701, S400
[ 1.880028] usb 2-2: new high speed USB device using ehci_hcd and address 2
[ 2.040033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.040437] ata3.00: ATA-8: WDC WD1600BEVT-60ZCT0, 11.01A11, max UDMA/100
[ 2.040441] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.040911] ata3.00: configured for UDMA/100
[ 2.041080] scsi 2:0:0:0: Direct-Access ATA WDC WD1600BEVT-6 11.0 PQ: 0 ANSI: 5
[ 2.041253] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 2.041379] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.041489] sd 2:0:0:0: [sda] Write Protect is off
[ 2.041493] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.041538] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.041784] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 2.125637] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.981937] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 20.670305] udev[392]: starting version 163
[ 20.817213] lp: driver loaded but no devices found
[ 20.906846] Adding 3325416k swap on /dev/sda5. Priority:-1 extents:1 across:3325416k
[ 20.983669] acpi device:23: registered as cooling_device2
[ 20.983842] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 20.983915] ACPI: Video Device [UVGA] (multi-head: yes rom: no post: no)
[ 21.128688] i2c i2c-0: nForce2 SMBus adapter at 0x3040
[ 21.128714] i2c i2c-1: nForce2 SMBus adapter at 0x3000
[ 21.135154] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 21.158773] Linux agpgart interface v0.103
[ 21.232315] input: HP WMI hotkeys as /devices/virtual/input/input7
[ 21.261357] r852 0000:02:05.3: PCI INT B -> Link[LNK2] -> GSI 7 (level, low) -> IRQ 7
[ 21.261481] Linux video capture interface: v2.00
[ 21.274646] cfg80211: Calling CRDA to update world regulatory domain
[ 21.275045] uvcvideo: Found UVC 1.00 device HP Webcam (0c45:62c0)
[ 21.275086] r852: Non dma capable device detected, dma disabled
[ 21.275099] r852: driver loaded succesfully
[ 21.286101] input: HP Webcam as /devices/pci0000:00/0000:00:04.1/usb2/2-2/2-2:1.0/input/input8
[ 21.286343] usbcore: registered new interface driver uvcvideo
[ 21.286346] USB Video Class driver (v0.1.0)
[ 21.303643] type=1400 audit(1294503449.298:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=753 comm="apparmor_parser"
[ 21.303955] type=1400 audit(1294503449.298:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=753 comm="apparmor_parser"
[ 21.304135] type=1400 audit(1294503449.302:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=753 comm="apparmor_parser"
[ 21.304782] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 21.306131] type=1400 audit(1294503449.302:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=761 comm="apparmor_parser"
[ 21.306445] type=1400 audit(1294503449.302:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=761 comm="apparmor_parser"
[ 21.306626] type=1400 audit(1294503449.302:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=761 comm="apparmor_parser"
[ 21.310522] nvidia: module license 'NVIDIA' taints kernel.
[ 21.310526] Disabling lock debugging due to kernel taint
[ 21.415194] cfg80211: World regulatory domain updated:
[ 21.415198] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.415202] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.415205] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.415209] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.415212] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.415215] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.447175] ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 19
[ 21.447182] alloc irq_desc for 19 on node -1
[ 21.447185] alloc kstat_irqs on node -1
[ 21.447196] ath5k 0000:03:00.0: PCI INT A -> Link[LK4E] -> GSI 19 (level, low) -> IRQ 19
[ 21.447207] ath5k 0000:03:00.0: setting latency timer to 64
[ 21.447263] ath5k 0000:03:00.0: registered as 'phy0'
[ 21.958234] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 16
[ 21.958242] alloc irq_desc for 16 on node -1
[ 21.958244] alloc kstat_irqs on node -1
[ 21.958257] nvidia 0000:00:12.0: PCI INT A -> Link[LGPU] -> GSI 16 (level, low) -> IRQ 16
[ 21.958264] nvidia 0000:00:12.0: setting latency timer to 64
[ 21.958271] vgaarb: device changed decodes: PCI:0000:00:12.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 21.960986] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.28 Wed Sep 29 09:47:25 PDT 2010
[ 21.983311] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[ 21.983318] alloc irq_desc for 21 on node -1
[ 21.983320] alloc kstat_irqs on node -1
[ 21.983333] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[ 21.983337] hda_intel: Disable MSI for Nvidia chipset
[ 21.983395] HDA Intel 0000:00:07.0: setting latency timer to 64
[ 22.025642] ath: EEPROM regdomain: 0x67
[ 22.025646] ath: EEPROM indicates we should expect a direct regpair map
[ 22.025650] ath: Country alpha2 being used: 00
[ 22.025652] ath: Regpair used: 0x67
[ 22.036374] phy0: Selected rate control algorithm 'minstrel'
[ 22.037075] Registered led device: ath5k-phy0::rx
[ 22.037101] Registered led device: ath5k-phy0::tx
[ 22.037105] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 22.296690] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000/0x0
[ 22.375093] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 22.469201] input: HDA NVidia Headphone as /devices/pci0000:00/0000:00:07.0/sound/card0/input10
[ 23.017404] EXT3-fs: barriers not enabled
[ 23.017599] kjournald starting. Commit interval 5 seconds
[ 23.017891] EXT3-fs (sda7): using internal journal
[ 23.017897] EXT3-fs (sda7): mounted filesystem with ordered data mode
[ 25.555711] type=1400 audit(1294503453.550:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1001 comm="apparmor_parser"
[ 25.556135] type=1400 audit(1294503453.554:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1001 comm="apparmor_parser"
[ 25.599843] alloc irq_desc for 42 on node -1
[ 25.599848] alloc kstat_irqs on node -1
[ 25.599858] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 25.600060] eth0: no link during initialization.
[ 25.600941] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 25.610852] ppdev: user-space parallel port driver
[ 25.628177] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 25.666207] type=1400 audit(1294503453.662:10): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1111 comm="apparmor_parser"
[ 25.667293] type=1400 audit(1294503453.662:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1112 comm="apparmor_parser"
[ 26.032225] usbcore: registered new interface driver hsfusbcd2
[ 27.816720] usbcore: deregistering interface driver hsfusbcd2
[ 28.048984] usbcore: registered new interface driver hsfusbcd2
[ 28.062897] apm: BIOS not found.
[ 28.285648] RPC: Registered udp transport module.
[ 28.285652] RPC: Registered tcp transport module.
[ 28.285655] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.319133] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 28.351411] svc: failed to register lockdv1 RPC service (errno 97).
[ 28.352603] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 28.398131] NFSD: starting 90-second grace period
[ 28.724168] vboxdrv: Found 2 processor cores.
[ 28.725520] vboxdrv: fAsync=1 offMin=0x197e81 offMax=0x197e81
[ 28.726983] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 28.726988] vboxdrv: Successfully loaded version 3.2.12 (interface 0x00140001).
[ 30.507754] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 42.050899] wlan0: authenticate with 00:1e:58:c1:29:8d (try 1)
[ 42.056127] wlan0: authenticated
[ 42.056160] wlan0: associate with 00:1e:58:c1:29:8d (try 1)
[ 42.065022] wlan0: RX AssocResp from 00:1e:58:c1:29:8d (capab=0x431 status=0 aid=1)
[ 42.065027] wlan0: associated
[ 42.065732] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 42.195744] padlock: VIA PadLock not detected.
[ 52.976021] wlan0: no IPv6 routers present
[ 92.005042] Clocksource tsc unstable (delta = -256162825 ns)
[ 137.163555] usbcore: deregistering interface driver hsfusbcd2
[ 157.799468] usbcore: registered new interface driver hsfusbcd2
[ 573.895724] usbcore: deregistering interface driver hsfusbcd2
[ 575.603979] usbcore: registered new interface driver hsfusbcd2
[ 576.694370] process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.default.retrans_time; Use net.ipv6.neigh.default.retrans_time_ms instead.
Module Size Used by
hsfusbcd2 56725 0
hsfmc97sis 59386 0
hsfmc97ati 58323 0
hsfmc97ali 64945 0
hsfmc97via 60846 0
hsfmc97ich 62418 0
hsfpcibasic3 101189 0
hsfpcibasic2 56908 0
hsfserial 18851 8 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2
hsfengine 1275502 9 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial
hsfosspec 102056 10 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic3,hsfpcibasic2,hsfserial,hsfengine
hsfsoar 92542 7 hsfusbcd2,hsfmc97sis,hsfmc97ati,hsfmc97ali,hsfmc97via,hsfmc97ich,hsfpcibasic2
aes_i586 7280 1
aes_generic 26875 1 aes_i586
binfmt_misc 6599 1
vboxnetadp 6454 0
vboxnetflt 15216 0
vboxdrv 189879 2 vboxnetadp,vboxnetflt
nfsd 241120 11
lockd 65605 1 nfsd
nfs_acl 2257 1 nfsd
auth_rpcgss 33937 1 nfsd
sunrpc 193178 12 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3449 1 nfsd
parport_pc 26058 0
ppdev 5556 0
snd_hda_codec_conexant 29736 1
joydev 8735 0
arc4 1165 2
snd_hda_intel 22107 2
snd_hda_codec 87552 2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep 5040 1 snd_hda_codec
snd_pcm 71475 2 snd_hda_intel,snd_hda_codec
snd_seq_midi 4588 0
snd_rawmidi 17783 1 snd_seq_midi
snd_seq_midi_event 6047 1 snd_seq_midi
snd_seq 47174 2 snd_seq_midi,snd_seq_midi_event
nvidia 7088432 46
ath5k 130051 0
mac80211 231541 1 ath5k
snd_timer 19067 2 snd_pcm,snd_seq
snd_seq_device 5744 3 snd_seq_midi,snd_rawmidi,snd_seq
ath 8153 1 ath5k
uvcvideo 55847 0
r852 9536 0
videodev 43098 1 uvcvideo
v4l1_compat 13359 2 uvcvideo,videodev
hp_wmi 5191 0
snd 49006 13 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
sm_common 3285 1 r852
nand 34905 2 r852,sm_common
nand_ids 2903 1 nand
nand_ecc 3938 1 nand
cfg80211 144470 3 ath5k,mac80211,ath
mtd 18877 2 sm_common,nand
psmouse 59033 0
soundcore 880 1 snd
serio_raw 4022 0
k8temp 3132 0
snd_page_alloc 7120 2 snd_hda_intel,snd_pcm
i2c_nforce2 5179 0
agpgart 32011 1 nvidia
video 18712 0
lp 7342 0
output 1883 1 video
parport 31492 3 parport_pc,ppdev,lp
usbhid 36882 0
hid 67742 1 usbhid
firewire_ohci 21106 0
ahci 19013 0
sdhci_pci 6339 0
libahci 21667 5 ahci
sdhci 15890 1 sdhci_pci
firewire_core 46643 1 firewire_ohci
led_class 2633 2 ath5k,sdhci
forcedeth 49433 0
pata_amd 8746 0
crc_itu_t 1383 1 firewire_core
