Please guide me how to proceed after scanning with scanModem.
Thank you and awaiting your help
Jake, India
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry PCLinuxOS release 2010 (PCLinuxOS) for i586
Kernel 2.6.32.11-pclos2 on a Dual-processor i686 / kernel 2.6.32.11-pclos2
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, PCLinuxOS
Kernel , ALSA_version=1.0.21
Linux version 2.6.32.11-pclos2 (root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.1 (GCC) ) #1 SMP Wed Apr 7 11:07:59 CDT 2010
scanModem update of: 2010_05_29
Distrib_ID=MandrivaLinux
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 047e:2892 Agere Systems, Inc. (Lucent) Systems Soft Modem
ID 5986:0241 Acer, Inc
ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0 multicard reader
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 17aa:3bf8 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Modem interrupt assignment and sharing:
22: 786 0 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0640000-0xf0643fff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: ALC269 Analog : ALC269 Analog : playback 1 : capture 1
about /proc/asound/cards:
------------------------
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xf0640000 irq 22
PCI slot 00:1b.0 has a High Definition Audio Card
The drivers are in the kernel modules tree at:
The HDA diagnostics did not recognize a modem chip on the audio subsystem,
though a Conexant chip modem might not be recognized.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 001:
Modem chipset detected on
SLOT="Bus 001 Device 002:"
NAME="Agere Systems, Inc. (Lucent) Systems Soft Modem"
bus=001
USBmodemID=047e:2892
IDENT=agrsm
Driver=agrsm
For a detailed USB cellphone usage report, see http://linmodems.technion.ac.il/bigarch/archive-eighth/msg03240.html
For candidate modem in: 001
Agere Systems, Inc. (Lucent) Systems Soft Modem
Primary device ID: 047e:2892
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial driver pair.
There are a few different chipsets which use this driver pair, but they use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your Linux distros dkms package
is previously installed, if provides for future updates matching forthcoming kernels.
-------------- end Agere Systems section -------------------
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=17aa:3bf8
IRQ=22
HDA2=00:1b.0
SOFT=8086:27d8.HDA
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Primary device ID: 8086:27d8
Subsystem PCI_id 17aa:3bf8
Softmodem codec or chipset from diagnostics:
from Archives:
Support type needed or chipset:
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd. Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD_gcc4.4_alsa1.0.21.tar.gz from:
http://linmodems.technion.ac.il/packages/smartlink/
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.1
and the compiler used in kernel assembly: 4.4.1
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32.11-pclos2/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-t 1 root root 328248 2009-11-15 06:12 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 eth1
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
/etc/udev/rules.d/91-usb_modeswitch.rules:# Huawei E270+ (HSPA+ modem)
Within /etc/modprobe.conf files:
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
