Piero Mazza - Italy - kernel 2.6.35-22-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



See the attachment.
Piero Mazza - Milan (Italy)
 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.35-22-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  Ubuntu ,  ALSA_version=1.0.23
Linux version 2.6.35-22-generic (buildd@vernadsky) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #35-Ubuntu SMP Sat Oct 16 20:36:48 UTC 2010
 scanModem update of:  2010_05_29

Distrib_ID=Ubuntu
DistribCodeName=maverick
AptRepositoryStem=http://it.archive.ubuntu.com/ubuntu/


The dkms driver upgrade utilities are installed,

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 08ff:1600 AuthenTec, Inc. AES1600
 ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
 ID 1631:0601 Good Way Technology 
 ID 1631:0121 Good Way Technology 
 ID 04b4:6830 Cypress Semiconductor Corp. CY7C68300A EZ-USB AT2 USB 2.0 to ATA/ATAPI
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

Candidate PCI devices with modem chips are:
00:0a.0 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem (rev 01)
04:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) (rev 10)
High Definition Audio cards can host modem chips.

For candidate card in slot 00:0a.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:0a.0	14f1:2f00	14f1:2004	Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem 

 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 00:0a.0 ----
[    0.200078] pci 0000:00:0a.0: reg 10: [mem 0xdffe0000-0xdffeffff]
[    0.200088] pci 0000:00:0a.0: reg 14: [io  0xf800-0xf807]
[    0.200147] pci 0000:00:0a.0: PME# supported from D3hot D3cold
[    0.200153] pci 0000:00:0a.0: PME# disabled

 The PCI slot 00:0a.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

For candidate card in slot 04:01.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 04:01.0	1106:3288	1631:e028	Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] 

 Modem interrupt assignment and sharing: 
  66:       1859          0   PCI-MSI-edge      hda_intel
 --- Bootup diagnostics for card in PCI slot 04:01.0 ----
[    0.201909] pci 0000:04:01.0: reg 10: [mem 0xdfafc000-0xdfafffff 64bit]
[    0.201970] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.201976] pci 0000:04:01.0: PME# disabled
[    0.201992] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    7.678054] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.678127] HDA Intel 0000:04:01.0: irq 66 for MSI/MSI-X
[    7.678166] HDA Intel 0000:04:01.0: setting latency timer to 64
[    7.678171] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
[ 2061.768598] HDA Intel 0000:04:01.0: PCI INT A disabled
[ 2061.784516] PM: freeze of drv:HDA Intel dev:0000:04:01.0 complete after 118.254 msecs
[ 2062.352710] HDA Intel 0000:04:01.0: restoring config space at offset 0x1 (was 0x100006, writing 0x100002)
[ 2062.408561] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2062.408573] HDA Intel 0000:04:01.0: setting latency timer to 64
[ 2062.408632] HDA Intel 0000:04:01.0: irq 66 for MSI/MSI-X

 The PCI slot 04:01.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 

 New HCF.HSF device 1106:3288
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

Predictive  diagnostics for card in bus 00:0a.0:
	Modem chipset  detected on
NAME="Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem "
CLASS=0780
PCIDEV=14f1:2f00
SUBSYS=14f1:2004
IRQ=11
HDA2=04:01.0
IDENT=hsfmodem
Driver=hsfmodem-drivers

 For candidate modem in:  00:0a.0
   0780 Communication controller: Conexant Systems, Inc. HSF 56k HSFi Modem 
      Primary device ID:  14f1:2f00
 Support type needed or chipset:	hsfmodem
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.35_22_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.35_22_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers 
will be auto compiled anyway. Alternatively, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt



Predictive  diagnostics for card in bus 04:01.0:
	Modem chipset  detected on
NAME="Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] "
package="both hcfpcimodem and hsfmodem"
CLASS=0403
PCIDEV=1106:3288
SUBSYS=1631:e028
IRQ=66
IDENT=HCF.HSF

 For candidate modem in:  04:01.0
   0403 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] 
      Primary device ID:  1106:3288
 Support type needed or chipset:	HCF.HSF
 


For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 1106:3288 could be either a HSF or HCF Conexant modem, because of ambiguous
 use of the PCI ID by modem assemblers. First try the hcfpcimodem package.
 If the installation aborts, then use the hsfmodem package. Read DOCs/Conexant.txt
 for details and Modem/DOCs/YourSystem.txt for follow through guidance.


For all code packages from Linuxant.com, either a driver set matching the boot kernel will be installed,
or the drivers will first be compiled and then installed. The expert on modem software for Linux is
"Support (Jonathan)" <modem.support@xxxxxxxxxxxx>

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.06full_k2.6.35_22_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.35_22_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, the needed drivers 
will be auto compiled anyway. Alternatively, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm
 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt


 Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.5
             and the compiler used in kernel assembly: 4.4.5

 linux-headers-2.6.35-22-generic resources needed for compiling are not manifestly ready!

 If compiling is necessary packages must be installed, providing:
	 linux-headers-2.6.35-22-generic


If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb


Checking pppd properties:
	-rwsr-xr-- 1 root dip 273248 2010-07-09 18:41 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
	$ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
	sudo chmod a+x /usr/sbin/pppd

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------


[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux