Larry, 1) Please remove the "-" from the phone number, write it as 4001165 2) Add a line "Carrier Check = no" to your /etc/wvdial.conf try to connect again & see how it goes. Regards, Antonio On Sun, Nov 14, 2010 at 8:46 PM, Larry Hager <larrymeditates@xxxxxxxxx> wrote: > Hi, > > Here's the etc/wvdial.conf file. Also, my ISP info is as follows: > phone: 400-1165, User Name: 7077513930, Password is a series of numbers... > Thanks. > > > > larry@ubuntu-laptop:~$ sudo cat /etc/wvdial.conf > [sudo] password for larry: > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > Phone = 400-1165 > ISDN = 0 > Password = ********* > New PPPD = yes > Username = 7077513930 > Modem = /dev/ttySM0 > Baud = 460800 > > larry@ubuntu-laptop:~$ > larry@ubuntu-laptop:~$ > > > Take care, > > Larry > > > --- On Sun, 11/14/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> Subject: Re: Larry, U.S.A. kernel 2.6.27-7-generic >> To: "Larry Hager" <larrymeditates@xxxxxxxxx> >> Cc: discuss@xxxxxxxxxxxxx >> Date: Sunday, November 14, 2010, 2:16 PM >> Larry, >> >> RE: ATDT400-1165 >> 400-1165 appears to be you IP dial-ip number >> But it is also be used at >> Login: ATDT400-1165 >> as your LoginName, which can be correct. Please copy us >> your >> /etc/wvdial.conf file with xxxxxx replacing your password >> >> MarvS >> >> >> On Sun, Nov 14, 2010 at 2:21 PM, Larry Hager <larrymeditates@xxxxxxxxx> >> wrote: >> > When I try to connect to the internet it asks for a >> password which I'm assuming is the one I set up with my ISP >> but it doesn't work. I've included the output below. Can >> you tell me what's wrong? Thank you! >> > >> > larry@ubuntu-laptop:~$ sudo wvdial >> > [sudo] password for larry: >> > --> WvDial: Internet dialer version 1.60 >> > --> Cannot get information for serial port. >> > --> Initializing modem. >> > --> Sending: ATZ >> > ATZ >> > OK >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> +FCLASS=0 >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> > OK >> > --> Modem initialized. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ATDT400-1165 >> > CONNECT 44000 V42bis >> > --> Carrier detected. Waiting for prompt. >> > --> Connected, but carrier signal lost! >> Retrying... >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** O1 Communications TermServ ** >> > Login: >> > Login: >> > Login: >> > Login: ATDT400-1165 >> > Password: >> > --> Timed out while dialing. Trying again. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** Bad Password >> > Login: >> > Login: >> > Login: ATDT400-1165 >> > Password: 945102710 >> > >> > >> > --> Timed out while dialing. Trying again. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** Bad Password >> > Login: >> > Login: >> > Login: ATDT400-1165 >> > Password: 1234 >> > >> > --> Timed out while dialing. Trying again. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** Bad Password >> > NO CARRIER >> > --> No Carrier! Trying again. >> > --> Disconnecting at Sun Nov 14 11:06:58 2010 >> > larry@ubuntu-laptop:~$ 945102710 >> > bash: 945102710: command not found >> > larry@ubuntu-laptop:~$ >> > larry@ubuntu-laptop:~$ 1234 >> > bash: 1234: command not found >> > larry@ubuntu-laptop:~$ sudo wvdial >> > --> WvDial: Internet dialer version 1.60 >> > --> Cannot get information for serial port. >> > --> Initializing modem. >> > --> Sending: ATZ >> > ATZ >> > OK >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> +FCLASS=0 >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> > OK >> > --> Modem initialized. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ATDT400-1165 >> > CONNECT 44000 V42bis >> > --> Carrier detected. Waiting for prompt. >> > --> Connected, but carrier signal lost! >> Retrying... >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** O1 Communications TermServ ** >> > Login: >> > Login: >> > Login: >> > Login: ATDT400-1165 >> > Password: 945102710 >> > >> > --> Timed out while dialing. Trying again. >> > --> Sending: ATDT400-1165 >> > --> Waiting for carrier. >> > ** Bad Password >> > Login: >> > Login: >> > Login: ATDT400-1165 >> > Password: >> > >> > >> > >> > >> > >> > >> > Take care, >> > >> > Larry >> > >> > >> > --- On Sat, 11/13/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> wrote: >> > >> >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> >> Subject: Re: Larry, U.S.A. kernel >> 2.6.27-7-generic >> >> To: "Larry Hager" <larrymeditates@xxxxxxxxx> >> >> Date: Saturday, November 13, 2010, 10:32 PM >> >> Larry, >> >> >> >> The symbols ; < > have to be deleted from >> >> wvdial.conf >> >> >> >> Marv >> >> >> >> On Sat, Nov 13, 2010 at 8:40 PM, Larry Hager >> <larrymeditates@xxxxxxxxx> >> >> wrote: >> >> > I set up my dialer then tried to connect >> running >> >> martian modem and wvdial and I got the message >> that the >> >> phone number, log-in, password, etc. was missing >> even though >> >> when I checked the file I could see the phone >> number, >> >> log-in, password, etc. in the file. Can you tell >> me what's >> >> wrong? I've included the output below: >> >> > >> >> > larry@ubuntu-laptop:~$ sudo wvdial >> >> > [sudo] password for larry: >> >> > --> WvDial: Internet dialer version 1.60 >> >> > --> Cannot get information for serial >> port. >> >> > --> Initializing modem. >> >> > --> Sending: ATZ >> >> > ATZ >> >> > OK >> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 >> &D2 >> >> +FCLASS=0 >> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> >> > OK >> >> > --> Modem initialized. >> >> > --> Configuration does not specify a valid >> phone >> >> number. >> >> > --> Configuration does not specify a valid >> login >> >> name. >> >> > --> Configuration does not specify a >> valid >> >> password. >> >> > larry@ubuntu-laptop:~$ sudo nano >> /etc/wvdial.conf >> >> > larry@ubuntu-laptop:~$ sudo wvdial >> >> > --> WvDial: Internet dialer version 1.60 >> >> > --> Cannot get information for serial >> port. >> >> > --> Initializing modem. >> >> > --> Sending: ATZ >> >> > ATZ >> >> > OK >> >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 >> &D2 >> >> +FCLASS=0 >> >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> >> > OK >> >> > --> Modem initialized. >> >> > --> Configuration does not specify a valid >> phone >> >> number. >> >> > --> Configuration does not specify a valid >> login >> >> name. >> >> > --> Configuration does not specify a >> valid >> >> password. >> >> > larry@ubuntu-laptop:~$ sudo nano >> /etc/wvdial.conf >> >> > larry@ubuntu-laptop:~$ >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > Thanks! >> >> > >> >> > Larry Hager >> >> > >> >> > >> >> > >> >> > >> >> >> > >> > >> > >> > >> > > > >
