Larry, RE: ATDT400-1165 400-1165 appears to be you IP dial-ip number But it is also be used at Login: ATDT400-1165 as your LoginName, which can be correct. Please copy us your /etc/wvdial.conf file with xxxxxx replacing your password MarvS On Sun, Nov 14, 2010 at 2:21 PM, Larry Hager <larrymeditates@xxxxxxxxx> wrote: > When I try to connect to the internet it asks for a password which I'm assuming is the one I set up with my ISP but it doesn't work. ÂI've included the output below. ÂCan you tell me what's wrong? ÂThank you! > > larry@ubuntu-laptop:~$ sudo wvdial > [sudo] password for larry: > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ATDT400-1165 > CONNECT 44000 V42bis > --> Carrier detected. ÂWaiting for prompt. > --> Connected, but carrier signal lost! ÂRetrying... > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** O1 Communications TermServ ** > Login: > Login: > Login: > Login: ATDT400-1165 > Password: > --> Timed out while dialing. ÂTrying again. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** Bad Password > Login: > Login: > Login: ATDT400-1165 > Password: 945102710 > > > --> Timed out while dialing. ÂTrying again. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** Bad Password > Login: > Login: > Login: ATDT400-1165 > Password: 1234 > > --> Timed out while dialing. ÂTrying again. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** Bad Password > NO CARRIER > --> No Carrier! ÂTrying again. > --> Disconnecting at Sun Nov 14 11:06:58 2010 > larry@ubuntu-laptop:~$ 945102710 > bash: 945102710: command not found > larry@ubuntu-laptop:~$ > larry@ubuntu-laptop:~$ 1234 > bash: 1234: command not found > larry@ubuntu-laptop:~$ sudo wvdial > --> WvDial: Internet dialer version 1.60 > --> Cannot get information for serial port. > --> Initializing modem. > --> Sending: ATZ > ATZ > OK > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > OK > --> Modem initialized. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ATDT400-1165 > CONNECT 44000 V42bis > --> Carrier detected. ÂWaiting for prompt. > --> Connected, but carrier signal lost! ÂRetrying... > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** O1 Communications TermServ ** > Login: > Login: > Login: > Login: ATDT400-1165 > Password: 945102710 > > --> Timed out while dialing. ÂTrying again. > --> Sending: ATDT400-1165 > --> Waiting for carrier. > ** Bad Password > Login: > Login: > Login: ATDT400-1165 > Password: > > > > > > > Take care, > > Larry > > > --- On Sat, 11/13/10, Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> wrote: > >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> Subject: Re: Larry, U.S.A. kernel 2.6.27-7-generic >> To: "Larry Hager" <larrymeditates@xxxxxxxxx> >> Date: Saturday, November 13, 2010, 10:32 PM >> Larry, >> >> The symbols ; < > have to be deleted from >> wvdial.conf >> >> Marv >> >> On Sat, Nov 13, 2010 at 8:40 PM, Larry Hager <larrymeditates@xxxxxxxxx> >> wrote: >> > I set up my dialer then tried to connect running >> martian modem and wvdial and I got the message that the >> phone number, log-in, password, etc. was missing even though >> when I checked the file I could see the phone number, >> log-in, password, etc. in the file. ÂCan you tell me what's >> wrong? ÂI've included the output below: >> > >> > larry@ubuntu-laptop:~$ sudo wvdial >> > [sudo] password for larry: >> > --> WvDial: Internet dialer version 1.60 >> > --> Cannot get information for serial port. >> > --> Initializing modem. >> > --> Sending: ATZ >> > ATZ >> > OK >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> +FCLASS=0 >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> > OK >> > --> Modem initialized. >> > --> Configuration does not specify a valid phone >> number. >> > --> Configuration does not specify a valid login >> name. >> > --> Configuration does not specify a valid >> password. >> > larry@ubuntu-laptop:~$ sudo nano /etc/wvdial.conf >> > larry@ubuntu-laptop:~$ sudo wvdial >> > --> WvDial: Internet dialer version 1.60 >> > --> Cannot get information for serial port. >> > --> Initializing modem. >> > --> Sending: ATZ >> > ATZ >> > OK >> > --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> +FCLASS=0 >> > ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 >> > OK >> > --> Modem initialized. >> > --> Configuration does not specify a valid phone >> number. >> > --> Configuration does not specify a valid login >> name. >> > --> Configuration does not specify a valid >> password. >> > larry@ubuntu-laptop:~$ sudo nano /etc/wvdial.conf >> > larry@ubuntu-laptop:~$ >> > >> > >> > >> > >> > >> > Thanks! >> > >> > Larry Hager >> > >> > >> > >> > >> > > > >
