Marvin:
Yes, I did sudo modprobe agrserial.
I started over, did a complete removal of
agrsm06pci-2.1.80_20100106_i386.deb and associated files, reinstalled the
latest version dated 20100106, and efax-gtk 3.2.3 works fine. Then I
removed everything again and tried to duplicate the gripe in the OP, to see
what steps I had messed up, and I couldn't do it. So I don't know what it
was that caused the problem.
But everything is working fine now. Thanks for your help.
Bill
Marvin Stodolsky wrote:
>
> Running the install on my System, all is OK per attachment. Lacking
> the modem hardware, further tests would of course fail.
> But driver loading and port creation was OK.
>
> Did you use sudo during:
> $ sudo modprobe agrserial
>
> MarvS
>
> On Thu, Oct 14, 2010 at 11:08 PM, A4Skyhawk <624WTL@xxxxxxxxx> wrote:
>>
>> Marvin:
>> Â Â Did the uninstall both, reinstall 20100106. ÂBooted up w/ kernel -25,
>> but got the same messages as
>> shown in OP. Â Booted up w/ kernel -24 and the fax works fine.
>>
>> Bill
>>
>>
>> Marvin Stodolsky wrote:
>>>
>>> Uninstall Âboth reversions
>>> Then reinstall the 20100106
>>>
>>> MarvS
>>>
>>>y
>>> On Thu, Oct 14, 2010 at 10:39 PM, A4Skyhawk <624WTL@xxxxxxxxx> wrote:
>>>>
>>>> Marvin:
>>>> Â Â According to the Synaptic Package Manager, Âagrsm06pci-2.1-80,
>>>> version
>>>> 20100106 and version 20090825 are installed.
>>>>
>>>> Bill
>>>>
>>>>
>>>>
>>>>
>>>> A4Skyhawk wrote:
>>>>>
>>>>> Marvin:
>>>>> $ sudo dkms status
>>>>> agrsm06pci, 2.1.80~20090825, 2.6.28-18-generic, i686: built
>>>>> agrsm06pci, 2.1.80~20090825, 2.6.28-15-generic, i686: built
>>>>> agrsm06pci, 2.1.80~20090825, 2.6.28-19-generic, i686: installed
>>>>> agrsm06pci, 2.1.80~20090825, 2.6.28-16-generic, i686: built
>>>>> agrsm06pci, 2.1.80~20090825, 2.6.28-17-generic, i686: built
>>>>> agrsm06pci, 2.1.80, 2.6.32-24-generic, i686: installed
>>>>> nvidia-current, 195.36.24, 2.6.32-25-generic, i686: installed
>>>>> nvidia-current, 195.36.24, 2.6.31-22-generic, i686: installed
>>>>> nvidia-current, 195.36.24, 2.6.32-24-generic, i686: installed
>>>>>
>>>>> Bill
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Marvin Stodolsky wrote:
>>>>>>
>>>>>> Mostly likely the drivers for 2.6.32-25 kernel have not been
>>>>>> compiled.
>>>>>> They should be autocompiled and installed Âif you have dkms support
>>>>>> installed.
>>>>>> If DKMS is installled, what is reported by
>>>>>> # sudo dkms status
>>>>>>
>>>>>> MarvS
>>>>>>
>>>>>> On Thu, Oct 14, 2010 at 8:38 PM, A4Skyhawk <624WTL@xxxxxxxxx> wrote:
>>>>>>>
>>>>>>> I have Ubuntu 10.04.1 LTS, and efax-gtk 3.2.3. The fax program works
>>>>>>> fine w/
>>>>>>> kernel 2.6.32-24, but not -25.
>>>>>>>
>>>>>>> With the latter, the response to "sudo modprobe agrserial" is
>>>>>>> "FATAL: Module agrmodem not found.
>>>>>>> FATAL: Module agrserial not found.
>>>>>>> ln: creating symbolic link `/dev/ttySAGR': File exists
>>>>>>> FATAL: Error running install command for agrserial"
>>>>>>>
>>>>>>> Attempting to run Efax-gtk results in the following message:
>>>>>>> "efax-0.9a: 21:57:37 Error: can't open serial port /dev/ttySAGR: No
>>>>>>> such
>>>>>>> file or directory
>>>>>>> efax-0.9a: 21:57:37 failed page /(file name)
>>>>>>> efax-0.9a: 21:57:37 finished - unrecoverable error"
>>>>>>>
>>>>>>> Does anyone have a suggestion to debug/fix this? ÂIs this a
>>>>>>> "pointing/file
>>>>>>> path" problem?
>>>>>>>
>>>>>>> TIA,
>>>>>>> A4Skyhawk
>>>>>>> --
>>>>>>> View this message in context:
>>>>>>> http://old.nabble.com/A4Skyhawk%2C-USA%2C-Ubuntu-10.04%2C-kernel-2.6.32-25-----efax-gtk-v3.2.3-2-doesn%27t-work-tp29967812p29967812.html
>>>>>>> Sent from the Linux Winmodem Support - Discussion mailing list
>>>>>>> archive
>>>>>>> at Nabble.com.
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> View this message in context:
>>>> http://old.nabble.com/A4Skyhawk%2C-USA%2C-Ubuntu-10.04%2C-kernel-2.6.32-25-----efax-gtk-v3.2.3-2-doesn%27t-work-tp29967812p29968224.html
>>>> Sent from the Linux Winmodem Support - Discussion mailing list archive
>>>> at
>>>> Nabble.com.
>>>>
>>>>
>>>
>>>
>>
>> --
>> View this message in context:
>> http://old.nabble.com/A4Skyhawk%2C-USA%2C-Ubuntu-10.04%2C-kernel-2.6.32-25-----efax-gtk-v3.2.3-2-doesn%27t-work-tp29967812p29968339.html
>> Sent from the Linux Winmodem Support - Discussion mailing list archive at
>> Nabble.com.
>>
>>
>
>
> $ sudo dpkg -i agrsm06pci-2.1.80_20100106_i386.deb
> [sudo] password for marv:
> Selecting previously deselected package agrsm06pci-2.1.80.
> (Reading database ... 479514 files and directories currently installed.)
> Unpacking agrsm06pci-2.1.80 (from agrsm06pci-2.1.80_20100106_i386.deb) ...
>
> The dkms driver autocompiling package is installed.
> The drivers source code is being installed to the folder /usr/src/
> Then the drivers will be compiled and installed by the dkms tool
> provided that your System has adequate compiling support.
> Following kernel upgrades, complementary drivers will be
> automatically compiled and installed.
>
>
> Supported 11c1:0620 or 11c1:0620 PCI card modem not found!!
> Assuming development work and
> thus any proceeding with package installation,
> with source code in folder /usr/src/
>
>
> Setting up agrsm06pci-2.1.80 (20100106) ...
>
> Creating symlink /var/lib/dkms/agrsm06pci/2.1.80/source ->
> /usr/src/agrsm06pci-2.1.80
>
> DKMS: add Completed.
>
> Kernel preparation unnecessary for this kernel. Skipping...
>
> Building module:
> cleaning build area....
> make KERNELRELEASE=2.6.32-25-generic -C
> /lib/modules/2.6.32-25-generic/build
> M=/var/lib/dkms/agrsm06pci/2.1.80/build......
> cleaning build area....
>
> DKMS: build Completed.
>
> agrmodem.ko:
> Running module version sanity check.
> - Original module
> - No original module exists within this kernel
> - Installation
> - Installing to /lib/modules/2.6.32-25-generic/updates/dkms/
>
> agrserial.ko:
> Running module version sanity check.
> - Original module
> - No original module exists within this kernel
> - Installation
> - Installing to /lib/modules/2.6.32-25-generic/updates/dkms/
>
> depmod......
>
> DKMS: install Completed.
>
>
> $ ls /lib/modules/2.6.32-25-generic/updates/dkms/
> agrmodem.ko esscom_hw.ko linmodem.ko nvidia_bl.ko slamr.ko
> ungrab-winmodem.ko
> agrserial.ko esscom.ko mbp_nvidia_bl.ko nvidia-current.ko slusb.ko
> wl.ko
>
> $ sudo modprobe agrserial
>
> $ ls -l /dev/ttyS*
> crw-rw---- 1 root dialout 4, 64 2010-10-15 18:14 /dev/ttyS0
> crw-rw---- 1 root dialout 4, 65 2010-10-15 18:14 /dev/ttyS1
> crw-rw---- 1 root dialout 4, 66 2010-10-15 18:14 /dev/ttyS2
> crw-rw---- 1 root dialout 4, 67 2010-10-15 18:14 /dev/ttyS3
> lrwxrwxrwx 1 root root 12 2010-10-15 18:20 /dev/ttySAGR ->
> /dev/ttyAGS3
>
> $ ls -l /dev/ttyAGS3
> crw-rw---- 1 root dialout 62, 67 2010-10-15 18:20 /dev/ttyAGS3
>
>
>
--
View this message in context: http://old.nabble.com/A4Skyhawk%2C-USA%2C-Ubuntu-10.04%2C-kernel-2.6.32-25-----efax-gtk-v3.2.3-2-doesn%27t-work-tp29967812p29985873.html
Sent from the Linux Winmodem Support - Discussion mailing list archive at Nabble.com.
