Adriano, You need the following driver: 11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or agrsm-11c11040-2.1.80~20091225.tar.bz2 !! All available at: http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ Download it and install it. Try to remove the other drivers because they will likely conflict with the correct one. Report back presently. Regards, Antonio On 10/5/10, Adriano Lorencetti <loren7@xxxxxxxxx> wrote: > Hello friends ... > I'm trying to install a modem driver, but I'm having some problems: > > ModemData.txt attached. > > NAME="Communication controller: Intel Corporation 5 Series/3400 Series > Chipset HECI Controller " > CLASS=0780 > PCIDEV=8086:3b64 > SUBSYS=1509:5020 > IRQ=11 > HDA2=00:1b.0 > HDAchipVendorID=11c1 > CHIP=0x11c11040 > IDENT=agrsm > Driver=agrsm > package=agrsm-11c11040 > > As ScanModem told me, I used a driver from: > http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ > > I used the most recent driver: > agrsm06pci-2.1.80~20100106.tar.gz > > To install: > make clean > make > make modules_install > > The driver was installed perfectly, and the modules too. > The /dev/ttyAGS3 was created perfectly. > > The problem happens when I try to connect through kppp software. The > function "Configue, Modem, Ask to Modem" works but returns no > information. > And, when I try to connect, the modem stop at step "Initializing > modem" ... at this point the kppp stop ... no error appears ... and I > can "Cancel" and "Connect" again (no freeze), but always stop at the > point "Initializing modem". > > Any idea ? > > Tanks > > ____________________________ > Adriano Loren7 > loren7@xxxxxxxxx >
