This is the output file of the software ScanModem.
Distribution: UBUNTU 10.04LTS that will be upgraded to UBUNTU 10.10
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-24-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=x86_64, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #43-Ubuntu SMP Thu Sep 16 14:58:24 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://ftp.cc.uoc.gr/mirrors/linux/ubuntu/packages/
The dkms driver upgrade utilities are installed,
Some modem drivers can only be used in 32 bit modem on x86_64 systems,
while some others are competent on x86_64 Systems. Cases are:
1) http://linmodems.technion.ac.il/bigarch/archive-seventh/msg03119.html
for the snd-hda-intel audio+modem driver. Also applicable to AC97 modem controllers.
In both cases, 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component.
2) For USB modems using the slusb.ko driver. 32 bit libraries must be installed to support the slmodemd helper having a precompiled 32 bit component
3) The hsfmodem and hcfpcimodem drivers for Conexant chipsest modes are x86_64 competent.
4) agrsm packages for LSI/AgereSystems softmodems are not competent on x86_64 systems.
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 04fc:0801 Sunplus Technology Co., Ltd
ID 1131:1004 Integrated System Solution Corp. Bluetooth Device
ID 03f0:7004 Hewlett-Packard DeskJet 3320c
ID 10fd:0128 Anubis Electronics, Ltd
ID 062a:0102 Creative Labs
ID 05e3:0604 Genesys Logic, Inc. USB 1.1 Hub
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
05:02.0 Communication controller: ESS Technology ES2838/2839 SuperLink Modem (rev 01)
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller
High Definition Audio cards can host modem chips.
For candidate card in slot 05:02.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
05:02.0 125d:2838 125d:2838 Communication controller: ESS Technology ES2838/2839 SuperLink Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 05:02.0 ----
[ 0.346624] pci 0000:05:02.0: reg 10 io port: [0xec00-0xec0f]
[ 0.346661] pci 0000:05:02.0: supports D2
[ 0.346662] pci 0000:05:02.0: PME# supported from D0 D2 D3hot D3cold
[ 0.346665] pci 0000:05:02.0: PME# disabled
The PCI slot 05:02.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:3a3e 1043:82fe Audio device: Intel Corporation 82801JI
Modem interrupt assignment and sharing:
22: 1662 386 IO-APIC-fasteoi HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.345318] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
[ 0.345352] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.345355] pci 0000:00:1b.0: PME# disabled
[ 13.456881] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.456920] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 13.577561] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive diagnostics for card in bus 05:02.0:
Modem chipset detected on
NAME="Communication controller: ESS Technology ES2838/2839 SuperLink Modem "
CLASS=0780
PCIDEV=125d:2838
SUBSYS=125d:2838
IRQ=15
HDA2=00:1b.0
IDENT=ESS.com
For candidate modem in: 05:02.0
0780 Communication controller: ESS Technology ES2838/2839 SuperLink Modem
Primary device ID: 125d:2838
Support type needed or chipset: ESS.com
Writing DOCs/Intel.txt
The ESScom 125d:2838 chipset modems are not supported under Linux.
Read DOCs/InfoGeneral.txt about hardware alternatives.
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801JI "
CLASS=0403
PCIDEV=8086:3a3e
SUBSYS=1043:82fe
IRQ=22
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation 82801JI
Primary device ID: 8086:3a3e
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-24-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 321680 2010-03-07 07:37 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0 wlan0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
