Hi Everybody, I am back, in this moment I have:
agrsm-tools_0.0.1_all.deb
agrsm06pci-2.1.80_20100106_i386.deb
Are those enough for:
Distribution and version: Ubuntu 10.04 LTS
uname -r shows: 2.6.32-21-generic
ModemData.txt shows:
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List
Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case
names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in
YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup
service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet
Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu
4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_03_18
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://cu.archive.ubuntu.com/ubuntu/
Presently install your Linux Distributions dkms package. It provides for
automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 152d:2338 JMicron Technology Corp. / JMicron USA Technology Corp.
JM20337 Hi-Speed USB to SATA & PATA Combo Bridge
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
04:01.0 Communication controller: Agere Systems Lucent V.92 Data/Fax Modem
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 04:01.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:01.0 11c1:0620 11c1:0620 Communication controller: Agere Systems Lucent
V.92 Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 04:01.0 ----
[ 0.192125] pci 0000:04:01.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.192171] pci 0000:04:01.0: PME# supported from D3hot D3cold
[ 0.192176] pci 0000:04:01.0: PME# disabled
The PCI slot 04:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1462:7529 Audio device: Intel Corporation N10/ICH 7
Family High Definition Audio Controller
Modem interrupt assignment and sharing:
16: 974 113 IO-APIC-fasteoi uhci_hcd:usb5, saa7134[0],
nouveau, saa7134[0], HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.190845] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ffc000-0xf9ffffff]
[ 0.190883] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.190887] pci 0000:00:1b.0: PME# disabled
[ 10.842301] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 10.842326] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 10.973216] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input6
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent software.
===
Predictive diagnostics for card in bus 04:01.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems Lucent V.92 Data/Fax Modem"
CLASS=0780
PCIDEV=11c1:0620
SUBSYS=11c1:0620
IRQ=11
HDA2=00:1b.0
IDENT=agrsm
For candidate modem in: 04:01.0
0780 Communication controller: Agere Systems Lucent V.92 Data/Fax Modem
Primary device ID: 11c1:0620
Support type needed or chipset: agrsm
Writing DOCs/Intel.txt
The AgereSystems/LSI agrsm code supports compiling of a agrmodem + agrserial
driver pair.
There are a few different chipsets which use this driver pair, but they use
different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29 agrsm048pci-2.1.60_20100108_i386.deb
or agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31 agrsm06pci-2.1.80_20100106_i386.deb
or agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb or
agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a modules
loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for your
Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems this
can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill effects.
All of the above packages are dkms competent. This means that if your Linux
distros dkms package
is previously installed, if provides for future updates matching forthcoming
kernels.
-------------- end Agere Systems section -------------------
Predictive diagnostics for card in bus 00:1b.0:
Modem chipset not detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio
Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1462:7529
IRQ=16
For candidate modem in: 00:1b.0
0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition
Audio Controller
Primary device ID: 8086:27d8
Support type needed or chipset:
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
The patch utility is needed for compiling ALSA drivers, and possibly
others.
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional
files,
in the FileNames.h (so called kernel "h"eaders) collection installed in
/usr/include/ .
For martian_modem, additional required packages are needed. The also
required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev
packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at
http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some
FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The
minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to
display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking pppd properties:
-rwsr-xr-- 1 root dip 273312 2010-03-06 22:59 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from
http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to
match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting
be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to
blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/agrsm.conf:## setup agrsm modem with only: "sudo modprobe
agrserial"
/etc/modprobe.d/agrsm.conf:install agrserial /sbin/modprobe --ignore-install
agrmodem ; /sbin/modprobe --ignore-install agrserial && \
/etc/modprobe.d/agrsm.conf:remove agrserial
/sbin/modprobe -r --ignore-remove agrserial ;
/sbin/modprobe -r --ignore-remove agrmodem && { if test -L /dev/ttySAGR;
then rm /dev/ttySAGR; fi } ; true
/etc/modprobe.d/agrsm.conf:# to automate bootup "sudo modprobe agrmodem"
/etc/modprobe.d/agrsm.conf:## to setup agrsm modem with only: "sudo modprobe
agrmodem"
/etc/modprobe.d/agrsm.conf:# install agrmodem
/sbin/modprobe --ignore-install agrmodem && \
/etc/modprobe.d/agrsm.conf:## of effects of agrmodem and agrserial loading
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
----------------------
Dr. Alexander Ochoa Agüero
"Las obras de conocimiento deben ser libres..." R. Stallman..
--
Este mensaje le ha llegado mediante el servicio de correo electronico que ofrece Infomed para respaldar el cumplimiento de las misiones del Sistema Nacional de Salud. La persona que envia este correo asume el compromiso de usar el servicio a tales fines y cumplir con las regulaciones establecidas
Infomed: http://www.sld.cu/
