hi,
iam from india and using ubanthu 10.iam using pci softring dial up
modem .iam unable to up my modem.it says modem is disabled.how to
solve it?
CPU0 CPU1
0: 48 0 IO-APIC-edge timer
1: 19 39 IO-APIC-edge i8042
4: 8 0 IO-APIC-edge
6: 243 0 IO-APIC-edge floppy
7: 0 0 IO-APIC-edge parport0
8: 1 0 IO-APIC-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 3595 0 IO-APIC-edge i8042
14: 0 0 IO-APIC-edge ata_piix
15: 0 0 IO-APIC-edge ata_piix
16: 50 597 IO-APIC-fasteoi i915
17: 0 0 IO-APIC-fasteoi uhci_hcd:usb3
18: 0 0 IO-APIC-fasteoi uhci_hcd:usb4
19: 421 280 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
20: 1559 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2
23: 7568 0 IO-APIC-fasteoi ata_piix
26: 1 0 PCI-MSI-edge eth0
NMI: 0 0 Non-maskable interrupts
LOC: 22621 7297 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
PND: 0 0 Performance pending work
RES: 877 1001 Rescheduling interrupts
CAL: 64 75 Function call interrupts
TLB: 370 391 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 1
MIS: 0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007f7ae000 - 000000007f7e0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007f7e0000 - 000000007f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07F800000 mask FFF800000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007f7a0000 (usable)
[ 0.000000] modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
[ 0.000000] modified: 000000007f7ae000 - 000000007f7e0000 (ACPI NVS)
[ 0.000000] modified: 000000007f7e0000 - 000000007f800000 (reserved)
[ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000
[ 0.000000] RAMDISK: 37809000 - 37fef249
[ 0.000000] Allocated new RAMDISK: 008de000 - 010c4249
[ 0.000000] Move RAMDISK from 0000000037809000 - 0000000037fef248 to 008de000 - 010c4248
[ 0.000000] ACPI: RSDP 000fb040 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 7f7a0000 0003C (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 05000721 MSFT 00000097)
[ 0.000000] ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 05000721 MSFT 00000097)
[ 0.000000] ACPI: DSDT 7f7a05c0 0682B (v01 A0798 A0798000 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 7f7ae000 00040
[ 0.000000] ACPI: APIC 7f7a0390 0006C (v01 A_M_I_ OEMAPIC 05000721 MSFT 00000097)
[ 0.000000] ACPI: MCFG 7f7a0400 0003C (v01 A_M_I_ OEMMCFG 05000721 MSFT 00000097)
[ 0.000000] ACPI: SLIC 7f7a0440 00176 (v01 ÿÿÿÿÿÿ ÿÿÿÿÿÿÿÿ 05000721 MSFT 00000097)
[ 0.000000] ACPI: OEMB 7f7ae040 00080 (v01 A_M_I_ AMI_OEM 05000721 MSFT 00000097)
[ 0.000000] ACPI: HPET 7f7a6df0 00038 (v01 A_M_I_ OEMHPET 05000721 MSFT 00000097)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00011000 - 00017f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #5 [00008da000 - 00008dd208] BRK ==> [00008da000 - 00008dd208]
[ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #7 [00008de000 - 00010c4249] NEW RAMDISK ==> [00008de000 - 00010c4249]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007f7a0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007f7a0
[ 0.000000] On node 0 totalpages: 522031
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c10c6200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2304 pages used for memmap
[ 0.000000] HighMem zone: 292514 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 7f800000 (gap: 7f800000:80780000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u1048576
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-21-generic root=UUID=0f0a32b5-0186-4508-93f8-94e1af7bcaf6 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 10442560 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007f7a0)
[ 0.000000] Memory: 2043172k/2088576k available (4673k kernel code, 43752k reserved, 2122k data, 656k init, 1179272k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1600.019 MHz processor.
[ 0.004007] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.03 BogoMIPS (lpj=6400076)
[ 0.004028] Security Framework initialized
[ 0.004052] AppArmor: AppArmor initialized
[ 0.004062] Mount-cache hash table entries: 512
[ 0.004225] Initializing cgroup subsys ns
[ 0.004230] Initializing cgroup subsys cpuacct
[ 0.004236] Initializing cgroup subsys memory
[ 0.004245] Initializing cgroup subsys devices
[ 0.004248] Initializing cgroup subsys freezer
[ 0.004251] Initializing cgroup subsys net_cls
[ 0.004275] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004278] CPU: L2 cache: 1024K
[ 0.004283] CPU: Physical Processor ID: 0
[ 0.004285] CPU: Processor Core ID: 0
[ 0.004290] mce: CPU supports 6 MCE banks
[ 0.004301] CPU0: Thermal monitoring enabled (TM2)
[ 0.004305] using mwait in idle threads.
[ 0.004313] Performance Events: Core2 events, Intel PMU driver.
[ 0.004324] ... version: 2
[ 0.004327] ... bit width: 40
[ 0.004329] ... generic registers: 2
[ 0.004331] ... value mask: 000000ffffffffff
[ 0.004334] ... max period: 000000007fffffff
[ 0.004336] ... fixed-purpose events: 3
[ 0.004339] ... event mask: 0000000700000003
[ 0.004345] Checking 'hlt' instruction... OK.
[ 0.023425] ACPI: Core revision 20090903
[ 0.036011] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.036018] ftrace: allocating 21771 entries in 43 pages
[ 0.040069] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040388] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.081327] CPU0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d
[ 0.084001] APIC calibration not consistent with PM-Timer: 115ms instead of 100ms
[ 0.084001] APIC delta adjusted to PM-Timer: 1249985 (1449963)
[ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.008000] CPU: L2 cache: 1024K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 1
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.168076] CPU1: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz stepping 0d
[ 0.168089] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.172020] Brought up 2 CPUs
[ 0.172025] Total of 2 processors activated (6400.02 BogoMIPS).
[ 0.172432] CPU0 attaching sched-domain:
[ 0.172438] domain 0: span 0-1 level MC
[ 0.172441] groups: 0 1
[ 0.172449] CPU1 attaching sched-domain:
[ 0.172452] domain 0: span 0-1 level MC
[ 0.172455] groups: 1 0
[ 0.172576] devtmpfs: initialized
[ 0.172576] regulator: core version 0.5
[ 0.172576] Time: 7:23:42 Date: 08/26/10
[ 0.172576] NET: Registered protocol family 16
[ 0.172576] Trying to unpack rootfs image as initramfs...
[ 0.172576] EISA bus registered
[ 0.172576] ACPI: bus type pci registered
[ 0.172576] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.172576] PCI: Not using MMCONFIG.
[ 0.172718] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=3
[ 0.172721] PCI: Using configuration type 1 for base access
[ 0.176146] bio: create slab <bio-0> at 0
[ 0.177319] ACPI: EC: Look up EC in DSDT
[ 0.181395] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.187507] ACPI: Interpreter enabled
[ 0.187524] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.187560] ACPI: Using IOAPIC for interrupt routing
[ 0.187630] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.191938] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources
[ 0.191943] PCI: Using MMCONFIG for extended config space
[ 0.201439] ACPI Warning: Incorrect checksum in table [OEMB] - 2C, should be 1F (20090903/tbutils-314)
[ 0.201602] ACPI: No dock devices found.
[ 0.201737] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.201851] pci 0000:00:02.0: reg 10 32bit mmio: [0xdfd00000-0xdfd7ffff]
[ 0.201858] pci 0000:00:02.0: reg 14 io port: [0x8800-0x8807]
[ 0.201865] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xe0000000-0xefffffff]
[ 0.201872] pci 0000:00:02.0: reg 1c 32bit mmio: [0xdfd80000-0xdfdbffff]
[ 0.201970] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdf8000-0xdfdfbfff]
[ 0.202022] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202027] pci 0000:00:1b.0: PME# disabled
[ 0.202106] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.202112] pci 0000:00:1c.0: PME# disabled
[ 0.202189] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.202194] pci 0000:00:1c.1: PME# disabled
[ 0.202253] pci 0000:00:1d.0: reg 20 io port: [0x9000-0x901f]
[ 0.202314] pci 0000:00:1d.1: reg 20 io port: [0x9400-0x941f]
[ 0.202376] pci 0000:00:1d.2: reg 20 io port: [0x9800-0x981f]
[ 0.202433] pci 0000:00:1d.3: reg 20 io port: [0xa000-0xa01f]
[ 0.202499] pci 0000:00:1d.7: reg 10 32bit mmio: [0xdfdffc00-0xdfdfffff]
[ 0.202559] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.202564] pci 0000:00:1d.7: PME# disabled
[ 0.202710] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.202716] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.202722] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
[ 0.202771] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.202779] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.202787] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.202795] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.202804] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
[ 0.202857] pci 0000:00:1f.2: reg 10 io port: [0xb800-0xb807]
[ 0.202865] pci 0000:00:1f.2: reg 14 io port: [0xb400-0xb403]
[ 0.202872] pci 0000:00:1f.2: reg 18 io port: [0xb000-0xb007]
[ 0.202880] pci 0000:00:1f.2: reg 1c io port: [0xa800-0xa803]
[ 0.202887] pci 0000:00:1f.2: reg 20 io port: [0xa400-0xa40f]
[ 0.202916] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.202921] pci 0000:00:1f.2: PME# disabled
[ 0.202972] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
[ 0.203049] pci 0000:00:1c.0: bridge io port: [0xe000-0xefff]
[ 0.203119] pci 0000:02:00.0: reg 10 64bit mmio: [0xdffc0000-0xdfffffff]
[ 0.203156] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xdffa0000-0xdffbffff]
[ 0.203197] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.203203] pci 0000:02:00.0: PME# disabled
[ 0.203261] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[ 0.203266] pci 0000:00:1c.1: bridge 32bit mmio: [0xdff00000-0xdfffffff]
[ 0.203312] pci 0000:01:01.0: reg 10 32bit mmio: [0xdfef0000-0xdfefffff]
[ 0.203321] pci 0000:01:01.0: reg 14 io port: [0xc800-0xc807]
[ 0.203371] pci 0000:01:01.0: PME# supported from D3hot D3cold
[ 0.203376] pci 0000:01:01.0: PME# disabled
[ 0.203430] pci 0000:00:1e.0: transparent bridge
[ 0.203435] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff]
[ 0.203441] pci 0000:00:1e.0: bridge 32bit mmio: [0xdfe00000-0xdfefffff]
[ 0.203465] pci_bus 0000:00: on NUMA node 0
[ 0.203474] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.203676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
[ 0.203785] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.203860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
[ 0.208420] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.208570] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.208710] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.208850] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.208996] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.209139] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.209280] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.209424] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.209573] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.209590] vgaarb: loaded
[ 0.209747] SCSI subsystem initialized
[ 0.209873] libata version 3.00 loaded.
[ 0.209978] usbcore: registered new interface driver usbfs
[ 0.209994] usbcore: registered new interface driver hub
[ 0.210027] usbcore: registered new device driver usb
[ 0.210197] ACPI: WMI: Mapper loaded
[ 0.210200] PCI: Using ACPI for IRQ routing
[ 0.210395] NetLabel: Initializing
[ 0.210398] NetLabel: domain hash size = 128
[ 0.210400] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.210415] NetLabel: unlabeled traffic allowed by default
[ 0.210459] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.210466] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.216099] Switching to clocksource tsc
[ 0.218767] AppArmor: AppArmor Filesystem Enabled
[ 0.218790] pnp: PnP ACPI init
[ 0.218815] ACPI: bus type pnp registered
[ 0.224480] pnp: PnP ACPI: found 19 devices
[ 0.224484] ACPI: ACPI bus type pnp unregistered
[ 0.224490] PnPBIOS: Disabled by ACPI PNP
[ 0.224513] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
[ 0.224525] system 00:08: ioport range 0x290-0x297 has been reserved
[ 0.224533] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 0.224537] system 00:09: ioport range 0x800-0x87f has been reserved
[ 0.224541] system 00:09: ioport range 0x480-0x4bf has been reserved
[ 0.224545] system 00:09: ioport range 0x900-0x91f has been reserved
[ 0.224549] system 00:09: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.224553] system 00:09: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.224557] system 00:09: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.224561] system 00:09: iomem range 0xfff00000-0xffffffff could not be reserved
[ 0.224572] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.224576] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.224585] system 00:10: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 0.224593] system 00:11: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.224601] system 00:12: iomem range 0x0-0x9ffff could not be reserved
[ 0.224604] system 00:12: iomem range 0xc0000-0xdffff could not be reserved
[ 0.224608] system 00:12: iomem range 0xe0000-0xfffff could not be reserved
[ 0.224612] system 00:12: iomem range 0x100000-0x7f7fffff could not be reserved
[ 0.259394] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03
[ 0.259423] pci 0000:00:1c.0: IO window: 0xe000-0xefff
[ 0.259430] pci 0000:00:1c.0: MEM window: 0x80000000-0x801fffff
[ 0.259435] pci 0000:00:1c.0: PREFETCH window: 0x00000080200000-0x000000803fffff
[ 0.259444] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.259448] pci 0000:00:1c.1: IO window: 0xd000-0xdfff
[ 0.259455] pci 0000:00:1c.1: MEM window: 0xdff00000-0xdfffffff
[ 0.259460] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.259468] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01
[ 0.259472] pci 0000:00:1e.0: IO window: 0xc000-0xcfff
[ 0.259478] pci 0000:00:1e.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.259483] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.259507] alloc irq_desc for 16 on node -1
[ 0.259510] alloc kstat_irqs on node -1
[ 0.259522] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.259528] pci 0000:00:1c.0: setting latency timer to 64
[ 0.259538] alloc irq_desc for 17 on node -1
[ 0.259541] alloc kstat_irqs on node -1
[ 0.259546] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.259552] pci 0000:00:1c.1: setting latency timer to 64
[ 0.259561] pci 0000:00:1e.0: setting latency timer to 64
[ 0.259567] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.259571] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.259574] pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
[ 0.259577] pci_bus 0000:03: resource 1 mem: [0x80000000-0x801fffff]
[ 0.259581] pci_bus 0000:03: resource 2 pref mem [0x80200000-0x803fffff]
[ 0.259584] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.259588] pci_bus 0000:02: resource 1 mem: [0xdff00000-0xdfffffff]
[ 0.259591] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
[ 0.259594] pci_bus 0000:01: resource 1 mem: [0xdfe00000-0xdfefffff]
[ 0.259598] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.259601] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
[ 0.259655] NET: Registered protocol family 2
[ 0.259793] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.260223] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.260845] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.261243] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.261247] TCP reno registered
[ 0.261413] NET: Registered protocol family 1
[ 0.261442] pci 0000:00:02.0: Boot video device
[ 0.261817] cpufreq-nforce2: No nForce2 chipset.
[ 0.261853] Scanning for low memory corruption every 60 seconds
[ 0.261993] audit: initializing netlink socket (disabled)
[ 0.262007] type=2000 audit(1282807421.259:1): initialized
[ 0.274582] highmem bounce pool size: 64 pages
[ 0.274589] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.276622] VFS: Disk quotas dquot_6.5.2
[ 0.276709] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.277478] fuse init (API version 7.13)
[ 0.277590] msgmni has been set to 1689
[ 0.277886] alg: No test for stdrng (krng)
[ 0.277959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.277963] io scheduler noop registered
[ 0.277966] io scheduler anticipatory registered
[ 0.277968] io scheduler deadline registered
[ 0.278022] io scheduler cfq registered (default)
[ 0.278197] alloc irq_desc for 24 on node -1
[ 0.278200] alloc kstat_irqs on node -1
[ 0.278213] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.278223] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.278367] alloc irq_desc for 25 on node -1
[ 0.278370] alloc kstat_irqs on node -1
[ 0.278378] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.278388] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.278486] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.278569] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.278704] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.278709] ACPI: Power Button [PWRB]
[ 0.278767] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.278771] ACPI: Power Button [PWRF]
[ 0.279499] ACPI: SSDT 7f7ae0c0 001D2 (v01 AMI CPU1PM 00000001 INTL 20060113)
[ 0.279893] processor LNXCPU:00: registered as cooling_device0
[ 0.280259] ACPI: SSDT 7f7ae2a0 00143 (v01 AMI CPU2PM 00000001 INTL 20060113)
[ 0.281008] processor LNXCPU:01: registered as cooling_device1
[ 0.285923] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.286035] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.286647] 00:0e: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.288093] brd: module loaded
[ 0.288696] loop: module loaded
[ 0.288811] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.288939] ata_piix 0000:00:1f.1: version 2.13
[ 0.288962] alloc irq_desc for 22 on node -1
[ 0.288964] alloc kstat_irqs on node -1
[ 0.288977] ata_piix 0000:00:1f.1: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.289030] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.289119] isapnp: Scanning for PnP cards...
[ 0.338076] scsi0 : ata_piix
[ 0.381694] scsi1 : ata_piix
[ 0.383272] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 0.383276] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 0.383320] alloc irq_desc for 23 on node -1
[ 0.383323] alloc kstat_irqs on node -1
[ 0.383333] ata_piix 0000:00:1f.2: PCI INT B -> GSI 23 (level, low) -> IRQ 23
[ 0.383339] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.383392] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.426925] scsi2 : ata_piix
[ 0.432474] Freeing initrd memory: 8088k freed
[ 0.436942] scsi3 : ata_piix
[ 0.438809] ata3: SATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa400 irq 23
[ 0.438814] ata4: SATA max UDMA/133 cmd 0xb000 ctl 0xa800 bmdma 0xa408 irq 23
[ 0.439271] Fixed MDIO Bus: probed
[ 0.439317] PPP generic driver version 2.4.2
[ 0.439435] tun: Universal TUN/TAP device driver, 1.6
[ 0.439438] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 0.439568] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.439600] alloc irq_desc for 20 on node -1
[ 0.439602] alloc kstat_irqs on node -1
[ 0.439613] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.439634] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.439638] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.439684] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.439711] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.439723] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.443618] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.443687] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdfdffc00
[ 0.459401] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.459525] usb usb1: configuration #1 chosen from 1 choice
[ 0.459565] hub 1-0:1.0: USB hub found
[ 0.459574] hub 1-0:1.0: 8 ports detected
[ 0.459651] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.459671] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.459719] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.459729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.459733] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.459774] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.459798] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009000
[ 0.459908] usb usb2: configuration #1 chosen from 1 choice
[ 0.459948] hub 2-0:1.0: USB hub found
[ 0.459956] hub 2-0:1.0: 2 ports detected
[ 0.460012] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.460019] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.460023] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.460064] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.460098] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00009400
[ 0.460206] usb usb3: configuration #1 chosen from 1 choice
[ 0.460238] hub 3-0:1.0: USB hub found
[ 0.460246] hub 3-0:1.0: 2 ports detected
[ 0.460298] alloc irq_desc for 18 on node -1
[ 0.460301] alloc kstat_irqs on node -1
[ 0.460307] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.460314] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.460318] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.460359] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.460392] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009800
[ 0.460502] usb usb4: configuration #1 chosen from 1 choice
[ 0.460536] hub 4-0:1.0: USB hub found
[ 0.460544] hub 4-0:1.0: 2 ports detected
[ 0.460603] alloc irq_desc for 19 on node -1
[ 0.460606] alloc kstat_irqs on node -1
[ 0.460611] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.460618] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.460622] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.460667] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.460699] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000a000
[ 0.460809] usb usb5: configuration #1 chosen from 1 choice
[ 0.460841] hub 5-0:1.0: USB hub found
[ 0.460850] hub 5-0:1.0: 2 ports detected
[ 0.460986] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.463573] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.463581] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.463729] mice: PS/2 mouse device common for all mice
[ 0.463873] rtc_cmos 00:03: RTC can wake from S4
[ 0.463922] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.463949] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 0.464084] device-mapper: uevent: version 1.0.3
[ 0.464213] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[ 0.464302] device-mapper: multipath: version 1.1.0 loaded
[ 0.464305] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.464442] EISA: Probing bus 0 at eisa.0
[ 0.464471] Cannot allocate resource for EISA slot 8
[ 0.464473] EISA: Detected 0 cards.
[ 0.464561] cpuidle: using governor ladder
[ 0.464564] cpuidle: using governor menu
[ 0.465141] TCP cubic registered
[ 0.465339] NET: Registered protocol family 10
[ 0.465954] lo: Disabled Privacy Extensions
[ 0.466396] NET: Registered protocol family 17
[ 0.466932] Using IPI No-Shortcut mode
[ 0.467032] PM: Resume from disk failed.
[ 0.467046] registered taskstats version 1
[ 0.467365] Magic number: 6:529:370
[ 0.467457] rtc_cmos 00:03: setting system clock to 2010-08-26 07:23:42 UTC (1282807422)
[ 0.467461] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.467463] EDD information not available.
[ 0.490919] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 0.615592] ata4.01: NODEV after polling detection
[ 0.623584] ata4.00: ATAPI: HP DVD Writer 1260r, MH22, max UDMA/100
[ 0.639610] ata4.00: configured for UDMA/100
[ 0.644523] isapnp: No Plug & Play device found
[ 0.651885] ata3.00: ATA-7: ST3160215AS, 4.AAB, max UDMA/133
[ 0.651890] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.718559] ata3.00: configured for UDMA/133
[ 0.718713] scsi 2:0:0:0: Direct-Access ATA ST3160215AS 4.AA PQ: 0 ANSI: 5
[ 0.718867] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 0.718890] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 0.718930] sd 2:0:0:0: [sda] Write Protect is off
[ 0.718933] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.718966] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.719147] sda:
[ 0.720515] scsi 3:0:0:0: CD-ROM HP DVD Writer 1260r MH22 PQ: 0 ANSI: 5
[ 0.725313] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.725318] Uniform CD-ROM driver Revision: 3.20
[ 0.725463] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 0.725524] sr 3:0:0:0: Attached scsi generic sg1 type 5
[ 0.766517] sda1 sda2 <
[ 0.775854] usb 1-8: new high speed USB device using ehci_hcd and address 2
[ 0.783874] sda5 sda6 sda7 sda8 sda9 >
[ 0.833247] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.833265] Freeing unused kernel memory: 656k freed
[ 0.833649] Write protecting the kernel text: 4676k
[ 0.833704] Write protecting the kernel read-only data: 1840k
[ 0.855754] udev: starting version 151
[ 0.910992] usb 1-8: configuration #1 chosen from 1 choice
[ 1.000317] Initializing USB Mass Storage driver...
[ 1.001538] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.004753] usbcore: registered new interface driver usb-storage
[ 1.004758] USB Mass Storage support registered.
[ 1.004959] usb-storage: device found at 2
[ 1.004962] usb-storage: waiting for device to settle before scanning
[ 1.008111] Floppy drive(s): fd0 is 1.44M
[ 1.024211] FDC 0 is a post-1991 82077
[ 1.728386] EXT4-fs (sda8): mounted filesystem with ordered data mode
[ 6.000554] usb-storage: device scan complete
[ 6.001156] scsi 4:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2
[ 6.001694] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 6.002251] sd 4:0:0:0: [sdb] 3973120 512-byte logical blocks: (2.03 GB/1.89 GiB)
[ 6.002872] sd 4:0:0:0: [sdb] Write Protect is off
[ 6.002877] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 6.002881] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.005121] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.005127] sdb: sdb1
[ 6.006996] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[ 6.007002] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 11.298267] Adding 4686840k swap on /dev/sda7. Priority:-1 extents:1 across:4686840k
[ 11.330870] udev: starting version 151
[ 11.542014] Linux agpgart interface v0.103
[ 11.545739] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 11.545743] Copyright (c) 2007 Atheros Corporation.
[ 11.545795] atl2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.545808] atl2 0000:02:00.0: setting latency timer to 64
[ 11.602727] agpgart-intel 0000:00:00.0: Intel 945G Chipset
[ 11.603135] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 11.605706] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 11.626841] intel_rng: FWH not detected
[ 11.648672] parport_pc 00:07: reported by Plug and Play ACPI
[ 11.648790] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 11.656709] lp: driver loaded but no devices found
[ 11.726462] [drm] Initialized drm 1.1.0 20060810
[ 11.730471] psmouse serio1: ID: 10 00 64
[ 11.732289] lp0: using parport0 (interrupt-driven).
[ 11.773321] ppdev: user-space parallel port driver
[ 11.784128] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.784136] i915 0000:00:02.0: setting latency timer to 64
[ 11.789821] [drm] set up 7M of stolen space
[ 11.791096] [drm] initialized overlay support
[ 11.798864] logips2pp: Detected unknown logitech mouse model 106
[ 11.827556] type=1505 audit(1282787633.857:2): operation="profile_load" pid=598 name="/sbin/dhclient3"
[ 11.828466] type=1505 audit(1282787633.857:3): operation="profile_load" pid=598 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.828936] type=1505 audit(1282787633.861:4): operation="profile_load" pid=598 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.953799] fb0: inteldrmfb frame buffer device
[ 11.953803] registered panic notifier
[ 11.953812] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.953864] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 11.953889] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 11.958072] vga16fb: initializing
[ 11.958077] vga16fb: mapped to 0xc00a0000
[ 11.958084] vga16fb: not registering due to another framebuffer present
[ 12.021144] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[ 12.074697] Console: switching to colour frame buffer device 180x56
[ 12.296388] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.309382] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 12.320099] EXT4-fs (sda9): mounted filesystem with ordered data mode
[ 12.996419] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.996971] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[ 12.996975] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[ 12.996977] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 13.888589] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.468413] alloc irq_desc for 26 on node -1
[ 14.468418] alloc kstat_irqs on node -1
[ 14.468436] atl2 0000:02:00.0: irq 26 for MSI/MSI-X
[ 14.469025] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.500108] type=1505 audit(1282787636.532:5): operation="profile_load" pid=906 name="/usr/share/gdm/guest-session/Xsession"
[ 14.503497] type=1505 audit(1282787636.532:6): operation="profile_replace" pid=907 name="/sbin/dhclient3"
[ 14.504634] type=1505 audit(1282787636.536:7): operation="profile_replace" pid=907 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 14.505111] type=1505 audit(1282787636.536:8): operation="profile_replace" pid=907 name="/usr/lib/connman/scripts/dhclient-script"
[ 14.510192] type=1505 audit(1282787636.540:9): operation="profile_load" pid=908 name="/usr/bin/evince"
[ 14.522491] type=1505 audit(1282787636.552:10): operation="profile_load" pid=908 name="/usr/bin/evince-previewer"
[ 14.530833] type=1505 audit(1282787636.560:11): operation="profile_load" pid=908 name="/usr/bin/evince-thumbnailer"
[ 17.268597] input: Mouseemu virtual keyboard as /devices/virtual/input/input6
[ 17.268821] input: Mouseemu virtual mouse as /devices/virtual/input/input7
[ 30.776383] end_request: I/O error, dev fd0, sector 0
[ 43.272459] end_request: I/O error, dev fd0, sector 0
[ 56.300445] end_request: I/O error, dev fd0, sector 0
[ 68.472410] end_request: I/O error, dev fd0, sector 0
[ 68.472421] __ratelimit: 9 callbacks suppressed
[ 68.472426] Buffer I/O error on device fd0, logical block 0
[ 80.644457] end_request: I/O error, dev fd0, sector 0
[ 80.644466] Buffer I/O error on device fd0, logical block 0
[ 92.816273] end_request: I/O error, dev fd0, sector 0
[ 92.816284] Buffer I/O error on device fd0, logical block 0
Module Size Used by
binfmt_misc 6587 1
uinput 6312 2
ipt_REJECT 1928 1
ipt_LOG 4542 5
xt_limit 1382 7
xt_tcpudp 2011 7
nls_iso8859_1 3249 2
nls_cp437 4919 2
vfat 8901 2
fat 47767 1 vfat
ipt_addrtype 1631 4
xt_state 1098 7
ip6table_filter 2343 1
ip6_tables 11227 1 ip6table_filter
nf_nat_irc 1124 0
nf_conntrack_irc 3332 1 nf_nat_irc
nf_nat_ftp 1836 0
nf_nat 15735 2 nf_nat_irc,nf_nat_ftp
nf_conntrack_ipv4 10672 9 nf_nat
nf_defrag_ipv4 1073 1 nf_conntrack_ipv4
nf_conntrack_ftp 5381 1 nf_nat_ftp
nf_conntrack 61583 7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
iptable_filter 2271 1
ip_tables 9991 1 iptable_filter
x_tables 14299 8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6_tables,ip_tables
snd_hda_codec_realtek 203168 1
fbcon 35102 71
tileblit 2031 1 fbcon
font 7557 1 fbcon
bitblit 4707 1 fbcon
softcursor 1189 1 bitblit
vga16fb 11385 0
vgastate 8961 1 vga16fb
snd_hda_intel 21877 2
snd_hda_codec 74201 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 5412 1 snd_hda_codec
snd_pcm_oss 35308 0
snd_mixer_oss 13746 1 snd_pcm_oss
snd_pcm 70662 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy 1338 0
snd_seq_oss 26726 0
snd_seq_midi 4557 0
snd_rawmidi 19056 1 snd_seq_midi
snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi
snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 19098 2 snd_pcm,snd_seq
snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i915 282354 3
drm_kms_helper 29297 1 i915
ppdev 5259 0
drm 162471 4 i915,drm_kms_helper
snd 54148 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
parport_pc 25962 1
asus_atk0110 9017 0
lp 7028 0
intel_agp 24177 2 i915
soundcore 6620 1 snd
psmouse 63245 0
serio_raw 3978 0
atl2 22383 0
i2c_algo_bit 5028 1 i915
video 17375 1 i915
output 1871 1 video
agpgart 31724 2 drm,intel_agp
snd_page_alloc 7076 2 snd_hda_intel,snd_pcm
parport 32635 3 ppdev,parport_pc,lp
floppy 53016 1
usb_storage 39425 1
Only plain text email is forwarded by the Discuss@xxxxxxxxxxxxx List Server,
as HTML can contain viruses. Use as the email Subject Line:
YourName, YourCountry kernel 2.6.32-21-generic
With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
YourCountry will enable Country specific guidance. Linux experts in YourCountry
can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
So in a day, also check the Archived responses at http://www.linmodems.org
-------------------------- System information ----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
AptRepositoryStem=http://in.archive.ubuntu.com/ubuntu/
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_hda_intel
Attached USB devices are:
ID 0951:1607 Kingston Technology DataTraveler 100
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
01:01.0 Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem (rev 01)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
High Definition Audio cards can host modem chips.
For candidate card in slot 01:01.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
01:01.0 14f1:2f50 14f1:205f Communication controller: Conexant Systems, Inc. Conexant SoftK56 Data/Fax Modem
Modem interrupt assignment and sharing:
--- Bootup diagnostics for card in PCI slot 01:01.0 ----
[ 0.203312] pci 0000:01:01.0: reg 10 32bit mmio: [0xdfef0000-0xdfefffff]
[ 0.203321] pci 0000:01:01.0: reg 14 io port: [0xc800-0xc807]
[ 0.203371] pci 0000:01:01.0: PME# supported from D3hot D3cold
[ 0.203376] pci 0000:01:01.0: PME# disabled
The PCI slot 01:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:1b.0 8086:27d8 1043:8290 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller
Modem interrupt assignment and sharing:
19: 421 280 IO-APIC-fasteoi uhci_hcd:usb5, HDA Intel
--- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[ 0.201970] pci 0000:00:1b.0: reg 10 64bit mmio: [0xdfdf8000-0xdfdfbfff]
[ 0.202022] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.202027] pci 0000:00:1b.0: PME# disabled
[ 11.953864] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 11.953889] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.021144] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
The PCI slot 00:1b.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
New HCF.HSF device 8086:27d8
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Completed candidate modem analyses.
The base of the UDEV device file system is: /dev/.udev
Versions adequately match for the compiler installed: 4.4.3
and the compiler used in kernel assembly: 4.4.3
Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.4
linuc_headers base folder /lib/modules/2.6.32-21-generic/build
However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.
If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/ get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:
Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:
Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
