kishor, BANGLADESH kernel 2.6.32-21-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Only plain text email is forwarded by the  Discuss@xxxxxxxxxxxxx List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.32-21-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@xxxxxxxxxxxxx are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org 
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010
 scanModem update of:  2010_01_09


Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms

 There are no blacklisted modem drivers in /etc/modprobe*  files 

 Potentially useful modem drivers now loaded are:
       snd_hda_intel           

Attached USB devices are:
 ID 10ce:ea6a Silicon Labs MobiData EDGE USB Modem
If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:  http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html

If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx

For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot	PCI ID		SubsystemID	Name
 ----------	---------	---------	--------------
 00:1b.0	8086:27d8	1458:a002	Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 

 Modem interrupt assignment and sharing: 
 16:       3842        364   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.179669] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe1280000-0xe1283fff]
[    0.179715] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.179719] pci 0000:00:1b.0: PME# disabled
[    9.378564] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.378586] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.459386] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4

 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
 if help is needed.
 


===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.

The ALSA verion is 1.0.21
The modem cards detected by "aplay -l"  are: None


The /proc/asound/pcm file reports:
-----------------------
00-00: ALC883 Analog : ALC883 Analog : playback 1 : capture 1
00-01: ALC883 Digital : ALC883 Digital : playback 1 : capture 1
00-02: ALC883 Analog : ALC883 Analog : capture 1

about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xe1280000 irq 16

 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.32-21-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
------------------------------------------------
 with USB and bridge devices not displayed.

 If your modem is connected by an external serial cable,
 or mounted internally on an ISA card, scanModem would not access it. 
 Try with Root permission
 $ sudo wvdialconf  /etc/wvdial.conf
 to detect these modem types and some USB modems.
 If the detection is successful, read the DOCs/wvdial.txt .
 Edit the /etc/wvdial.conf with Root permission:
 	sudo  gedit  /etc/wvdial.conf
  will be able to dial out with Root permission:
	sudo wvdial

 Many modems for which scanModem fails have Conexant chips. 
 From http://www.linuxant.com/drivers/modemident.php
 get the ListModem tool, which will report on Conexant chipset modems

 If the above tests fail, please provide any independent information available on your modem.
 If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
   Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
    ATI3 - Agere SoftModem Version 2.1.22
    ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.


Predictive  diagnostics for card in bus 00:1b.0:
	Modem chipset not detected on
NAME="Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1458:a002
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA


 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, 
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 8086:27d8.
 If another modem card is present, then most likely 8086:27d8 does not host a modem.
 If another modem card has not been detected, then possibilities are:
	1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
 are frequently not detectable by ALSA diagnostics
	2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
	sudo wvdialconf  /etc/wvdial.conf

 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller 
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1458:a002 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      

Support type needed or chipset:	

Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.

2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
	http://linmodems.technion.ac.il/packages/smartlink/


Writing DOCs/Intel.txt

For owners of a Dell PCs with Conexant HSF modems, a driver source package with full speed enabled is available, but requires driver compiling. Read DOCs/Conexant.txt

 From  http://www.linuxant.com/drivers/hsf/full/downloads-ubuntu-x86.php
 download hsfmodem-7.80.02.05full_k2.6.32_21_generic_ubuntu_i386.deb.zip 
 Under Linux unpack with:
 $ unzip hsfmodem*.zip
 Then install with:
 $ sudo dpkg -i hsfmodem*.deb
 Subsequently, the modem should be found with
 $ sudo wvdialconf /etc/wvdial.conf
 Edit in your personal information with:
 $ sudo gedit /etc/wvdial.conf
 and try dialing out with:
 $ sudo wvdial.
 See DOCs/Testing.txt  for details.
 
 The directions following below need only be pursued, if the above procedures are not adequate.

Start at http://www.linuxant.com/drivers/hsf/downloads-license.php to find the
hsfmodem package matching your System. For several Linux distros, there are
precompiled drivers matched to specific kernels. These have within the FileName,
your KernelVersion:	2.6.32_21_generic
They can be found through http://www.linuxant.com/drivers/hsf/full/downloads.php 
A more precise location may be given a few paragraphs below.
If an EXACT Match with your your KernelVersion is not found, one of the 
"Generic packages with source" near the bottom of the page must be used.
Downloaded packages must be moved into the Linux partition (home folder is OK)
and unzipped with:
	unzip hsf*.zip
The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

Support for Conexant chips hosted on High Definition Audio cards may require
installation of additional packages, one of the alsa-driver-linuxant packages
on  http://www.linuxant.com/alsa-driver/  At the same time download the 
alsa-driver-1.0.17-1.patch , in case it prove to be later needed. During the
hsfmodem install, there will be a message if there is necessary installation of
alsa-driver-linuxant

The installation command for a .deb suffic packages is, with root/adm permission:
  sudo dpkg -i hsf*.deb
while for .rpm suffix it is, with:
  rpm -i hsf*.rpm

There may a message that "Dependencies" are not satisfied.  In this case the Ubuntu/Debian packages to be installed are linux-libc-dev & libc6-dev. Package
names may be different for other Linuxes. If not on your install CD, these
packages can be searched for at http://packages.ubuntu.com.  After download,
they can be coinstalled with:
	sudo dpkg -i li*.deb
Again try the alsa-driver-linuxant

There may be a message that the patch must be applied.  In this case get the
ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.17.tar.bz2 
Under Linux, this package is unpacked with:
$ tar jxf alsa*.tar.bz2
Next the patch is applied with:
$ patch -p0 < alsa-driver-1.0.17-1.patch

See http://linmodems.technion.ac.il/bigarch/archive-eighth/msg00838.html
for details on compiling and installing replacement snd-hda-intel + its
dependent drivers.
After the installation is completed, rerun the hsfmodem installation.
Reboot and try to detect the modem with Root permission:
	sudo wvdialconf  /etc/wvdial.conf

 Read DOCs/Conexant.txt

Writing DOCs/Conexant.txt

Writing DOCs/Smartlink.txt
============ end Smartlink section =====================


 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.4.3
             and the compiler used in kernel assembly: 4.4.3

 The patch utility is needed for compiling ALSA drivers, and possibly others. 

 
 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.32-21-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.




If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking settings of:	/etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

For guidance on FAX usage, get from http://linmodems.technion.ac.il/packages/  get faxing.tar.gz
It has samples for a modem using port /dev/ttySL0, which must be changed to match your modem's port.

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:

     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

           CPU0       CPU1       
  0:         52          4   IO-APIC-edge      timer
  1:          5       3921   IO-APIC-edge      i8042
  4:         22          9   IO-APIC-edge    
  7:          0          0   IO-APIC-edge      parport0
  8:          1          0   IO-APIC-edge      rtc0
  9:          0          0   IO-APIC-fasteoi   acpi
 12:        184     214618   IO-APIC-edge      i8042
 14:       6870       6301   IO-APIC-edge      ata_piix
 15:      24747      22649   IO-APIC-edge      ata_piix
 16:       3842        364   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel
 18:        906         51   IO-APIC-fasteoi   uhci_hcd:usb4
 19:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3
 23:        120          2   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2
 26:          0          0   PCI-MSI-edge      eth0
 27:         18      26886   PCI-MSI-edge      i915
NMI:          0          0   Non-maskable interrupts
LOC:     229326     105788   Local timer interrupts
SPU:          0          0   Spurious interrupts
PMI:          0          0   Performance monitoring interrupts
PND:          0          0   Performance pending work
RES:      17995      13465   Rescheduling interrupts
CAL:         46        102   Function call interrupts
TLB:       2057       2572   TLB shootdowns
TRM:          0          0   Thermal event interrupts
THR:          0          0   Threshold APIC interrupts
MCE:          0          0   Machine check exceptions
MCP:         11         11   Machine check polls
ERR:          1
MIS:          0

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007f5e0000 (usable)
[    0.000000]  BIOS-e820: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007f5f0000 - 000000007f600000 (reserved)
[    0.000000]  BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] DMI 2.4 present.
[    0.000000] last_pfn = 0x7f5e0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CAFFF write-protect
[    0.000000]   CB000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 07F800000 mask FFF800000 uncachable
[    0.000000]   2 base 07F700000 mask FFFF00000 uncachable
[    0.000000]   3 base 07F600000 mask FFFF00000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
[    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007f5e0000 (usable)
[    0.000000]  modified: 000000007f5e0000 - 000000007f5e3000 (ACPI NVS)
[    0.000000]  modified: 000000007f5e3000 - 000000007f5f0000 (ACPI data)
[    0.000000]  modified: 000000007f5f0000 - 000000007f600000 (reserved)
[    0.000000]  modified: 00000000c0000000 - 00000000d0000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 0037400000 page 2M
[    0.000000]  0037400000 - 00377fe000 page 4k
[    0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[    0.000000] RAMDISK: 37809000 - 37fefbba
[    0.000000] Allocated new RAMDISK: 008de000 - 010c4bba
[    0.000000] Move RAMDISK from 0000000037809000 - 0000000037fefbb9 to 008de000 - 010c4bb9
[    0.000000] ACPI: RSDP 000f6bf0 00014 (v00 GBT   )
[    0.000000] ACPI: RSDT 7f5e3040 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: FACP 7f5e30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: DSDT 7f5e3180 040E8 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 7f5e0000 00040
[    0.000000] ACPI: HPET 7f5e73c0 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.000000] ACPI: MCFG 7f5e7440 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: APIC 7f5e72c0 00084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.000000] ACPI: SSDT 7f5e7ae0 003AB (v01  PmRef    CpuPm 00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1149MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000]   node 0 low ram: 00000000 - 377fe000
[    0.000000]   node 0 bootmap 00008000 - 0000ef00
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008d9e98]    TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[    0.000000]   #4 [000009f800 - 0000100000]    BIOS reserved ==> [000009f800 - 0000100000]
[    0.000000]   #5 [00008da000 - 00008dd0f6]              BRK ==> [00008da000 - 00008dd0f6]
[    0.000000]   #6 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #7 [00008de000 - 00010c4bba]      NEW RAMDISK ==> [00008de000 - 00010c4bba]
[    0.000000]   #8 [0000008000 - 000000f000]          BOOTMAP ==> [0000008000 - 000000f000]
[    0.000000] found SMP MP-table at [c00f5200] f5200
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000377fe
[    0.000000]   HighMem  0x000377fe -> 0x0007f5e0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007f5e0
[    0.000000] On node 0 totalpages: 521595
[    0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c10c6000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3963 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 221486 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2300 pages used for memmap
[    0.000000]   HighMem zone: 292070 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 7f600000 (gap: 7f600000:40a00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s36024 r0 d21320 u1048576
[    0.000000] pcpu-alloc: s36024 r0 d21320 u1048576 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517519
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=/dev/sda7 loop=/ubuntu/disks/root.disk ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 10433920 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000377fe:0007f5e0)
[    0.000000] Memory: 2041348k/2086784k available (4673k kernel code, 43752k reserved, 2122k data, 656k init, 1177480k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0847000   ( 656 kB)
[    0.000000]       .data : 0xc0590613 - 0xc07a2e48   (2122 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0590613   (4673 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:440
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2500.070 MHz processor.
[    0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5000.14 BogoMIPS (lpj=10000280)
[    0.004023] Security Framework initialized
[    0.004044] AppArmor: AppArmor initialized
[    0.004052] Mount-cache hash table entries: 512
[    0.004186] Initializing cgroup subsys ns
[    0.004190] Initializing cgroup subsys cpuacct
[    0.004195] Initializing cgroup subsys memory
[    0.004203] Initializing cgroup subsys devices
[    0.004205] Initializing cgroup subsys freezer
[    0.004208] Initializing cgroup subsys net_cls
[    0.004229] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004232] CPU: L2 cache: 2048K
[    0.004235] CPU: Physical Processor ID: 0
[    0.004237] CPU: Processor Core ID: 0
[    0.004240] mce: CPU supports 6 MCE banks
[    0.004249] CPU0: Thermal monitoring enabled (TM2)
[    0.004253] using mwait in idle threads.
[    0.004259] Performance Events: Core2 events, Intel PMU driver.
[    0.004269] ... version:                2
[    0.004271] ... bit width:              40
[    0.004273] ... generic registers:      2
[    0.004275] ... value mask:             000000ffffffffff
[    0.004277] ... max period:             000000007fffffff
[    0.004279] ... fixed-purpose events:   3
[    0.004281] ... event mask:             0000000700000003
[    0.004286] Checking 'hlt' instruction... OK.
[    0.023254] ACPI: Core revision 20090903
[    0.030256] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.030265] ftrace: allocating 21771 entries in 43 pages
[    0.032056] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.032368] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.073627] CPU0: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.076001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 2048K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM2)
[    0.160123] CPU1: Intel Pentium(R) Dual-Core  CPU      E5200  @ 2.50GHz stepping 06
[    0.160137] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.164019] Brought up 2 CPUs
[    0.164022] Total of 2 processors activated (9999.89 BogoMIPS).
[    0.164589] CPU0 attaching sched-domain:
[    0.164592]  domain 0: span 0-1 level MC
[    0.164595]   groups: 0 1
[    0.164602] CPU1 attaching sched-domain:
[    0.164604]  domain 0: span 0-1 level MC
[    0.164606]   groups: 1 0
[    0.164713] devtmpfs: initialized
[    0.164713] regulator: core version 0.5
[    0.164713] Time:  2:05:49  Date: 08/12/10
[    0.164713] NET: Registered protocol family 16
[    0.164713] Trying to unpack rootfs image as initramfs...
[    0.164713] EISA bus registered
[    0.164713] ACPI: bus type pci registered
[    0.164713] PCI: MCFG configuration 0: base c0000000 segment 0 buses 0 - 255
[    0.164713] PCI: MCFG area at c0000000 reserved in E820
[    0.164713] PCI: Using MMCONFIG for extended config space
[    0.164713] PCI: Using configuration type 1 for base access
[    0.168107] bio: create slab <bio-0> at 0
[    0.168812] ACPI: EC: Look up EC in DSDT
[    0.174347] ACPI: Interpreter enabled
[    0.174366] ACPI: (supports S0 S3 S4 S5)
[    0.174393] ACPI: Using IOAPIC for interrupt routing
[    0.179368] ACPI: No dock devices found.
[    0.179469] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.179568] pci 0000:00:02.0: reg 10 32bit mmio: [0xe1200000-0xe127ffff]
[    0.179574] pci 0000:00:02.0: reg 14 io port: [0xe000-0xe007]
[    0.179580] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[    0.179585] pci 0000:00:02.0: reg 1c 32bit mmio: [0xe1000000-0xe10fffff]
[    0.179669] pci 0000:00:1b.0: reg 10 64bit mmio: [0xe1280000-0xe1283fff]
[    0.179715] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.179719] pci 0000:00:1b.0: PME# disabled
[    0.179786] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.179791] pci 0000:00:1c.0: PME# disabled
[    0.179859] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.179863] pci 0000:00:1c.1: PME# disabled
[    0.179915] pci 0000:00:1d.0: reg 20 io port: [0xe100-0xe11f]
[    0.179966] pci 0000:00:1d.1: reg 20 io port: [0xe200-0xe21f]
[    0.180035] pci 0000:00:1d.2: reg 20 io port: [0xe300-0xe31f]
[    0.180085] pci 0000:00:1d.3: reg 20 io port: [0xe400-0xe41f]
[    0.180134] pci 0000:00:1d.7: reg 10 32bit mmio: [0xe1284000-0xe12843ff]
[    0.180307] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[    0.180312] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[    0.180316] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.180320] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.180372] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
[    0.180378] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
[    0.180385] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
[    0.180391] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
[    0.180397] pci 0000:00:1f.2: reg 20 io port: [0xf000-0xf00f]
[    0.180423] pci 0000:00:1f.2: PME# supported from D3hot
[    0.180427] pci 0000:00:1f.2: PME# disabled
[    0.180476] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f]
[    0.180545] pci 0000:00:1c.0: bridge io port: [0xc000-0xcfff]
[    0.180600] pci 0000:02:00.0: reg 10 io port: [0xd000-0xd0ff]
[    0.180621] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xe1110000-0xe1110fff]
[    0.180636] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xe1100000-0xe110ffff]
[    0.180646] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[    0.180687] pci 0000:02:00.0: supports D1 D2
[    0.180690] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180695] pci 0000:02:00.0: PME# disabled
[    0.180757] pci 0000:00:1c.1: bridge io port: [0xd000-0xdfff]
[    0.180761] pci 0000:00:1c.1: bridge 32bit mmio: [0xe0000000-0xe0ffffff]
[    0.180768] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe1100000-0xe11fffff]
[    0.180819] pci 0000:00:1e.0: transparent bridge
[    0.180823] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff]
[    0.180845] pci_bus 0000:00: on NUMA node 0
[    0.180850] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.181039] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[    0.181102] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    0.181177] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[    0.192951] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.193059] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.193162] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[    0.193270] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.193374] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.193478] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.193581] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.193685] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[    0.193803] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.193815] vgaarb: loaded
[    0.193945] SCSI subsystem initialized
[    0.194046] libata version 3.00 loaded.
[    0.194125] usbcore: registered new interface driver usbfs
[    0.194141] usbcore: registered new interface driver hub
[    0.194172] usbcore: registered new device driver usb
[    0.194313] ACPI: WMI: Mapper loaded
[    0.194316] PCI: Using ACPI for IRQ routing
[    0.194467] NetLabel: Initializing
[    0.194469] NetLabel:  domain hash size = 128
[    0.194471] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.194484] NetLabel:  unlabeled traffic allowed by default
[    0.194518] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.194524] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.200156] Switching to clocksource tsc
[    0.202320] AppArmor: AppArmor Filesystem Enabled
[    0.202335] pnp: PnP ACPI init
[    0.202352] ACPI: bus type pnp registered
[    0.205192] pnp: PnP ACPI: found 15 devices
[    0.205195] ACPI: ACPI bus type pnp unregistered
[    0.205201] PnPBIOS: Disabled by ACPI PNP
[    0.205214] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[    0.205217] system 00:01: ioport range 0x290-0x29f has been reserved
[    0.205220] system 00:01: ioport range 0x800-0x87f has been reserved
[    0.205224] system 00:01: ioport range 0x290-0x294 has been reserved
[    0.205227] system 00:01: ioport range 0x880-0x88f has been reserved
[    0.205237] system 00:0b: ioport range 0x400-0x4cf could not be reserved
[    0.205243] system 00:0c: iomem range 0xc0000000-0xcfffffff has been reserved
[    0.205250] system 00:0d: iomem range 0xcb400-0xcbfff has been reserved
[    0.205253] system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved
[    0.205256] system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
[    0.205259] system 00:0d: iomem range 0xfc000-0xfffff could not be reserved
[    0.205262] system 00:0d: iomem range 0x7f5e0000-0x7f5fffff could not be reserved
[    0.205265] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
[    0.205268] system 00:0d: iomem range 0x100000-0x7f5dffff could not be reserved
[    0.205272] system 00:0d: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.205275] system 00:0d: iomem range 0xfed13000-0xfed1dfff has been reserved
[    0.205278] system 00:0d: iomem range 0xfed20000-0xfed8ffff has been reserved
[    0.205281] system 00:0d: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.205284] system 00:0d: iomem range 0xffb00000-0xffb7ffff has been reserved
[    0.205288] system 00:0d: iomem range 0xfff00000-0xffffffff has been reserved
[    0.205291] system 00:0d: iomem range 0xe0000-0xeffff has been reserved
[    0.240024] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[    0.240029] pci 0000:00:1c.0:   IO window: 0xc000-0xcfff
[    0.240035] pci 0000:00:1c.0:   MEM window: 0x80000000-0x801fffff
[    0.240040] pci 0000:00:1c.0:   PREFETCH window: 0x00000080200000-0x000000803fffff
[    0.240048] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[    0.240051] pci 0000:00:1c.1:   IO window: 0xd000-0xdfff
[    0.240057] pci 0000:00:1c.1:   MEM window: 0xe0000000-0xe0ffffff
[    0.240062] pci 0000:00:1c.1:   PREFETCH window: 0x000000e1100000-0x000000e11fffff
[    0.240069] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[    0.240072] pci 0000:00:1e.0:   IO window: 0xb000-0xbfff
[    0.240077] pci 0000:00:1e.0:   MEM window: disabled
[    0.240081] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.240105]   alloc irq_desc for 16 on node -1
[    0.240107]   alloc kstat_irqs on node -1
[    0.240115] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.240120] pci 0000:00:1c.0: setting latency timer to 64
[    0.240129]   alloc irq_desc for 17 on node -1
[    0.240131]   alloc kstat_irqs on node -1
[    0.240135] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    0.240140] pci 0000:00:1c.1: setting latency timer to 64
[    0.240147] pci 0000:00:1e.0: setting latency timer to 64
[    0.240151] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.240155] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.240158] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.240161] pci_bus 0000:01: resource 1 mem: [0x80000000-0x801fffff]
[    0.240164] pci_bus 0000:01: resource 2 pref mem [0x80200000-0x803fffff]
[    0.240167] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.240170] pci_bus 0000:02: resource 1 mem: [0xe0000000-0xe0ffffff]
[    0.240173] pci_bus 0000:02: resource 2 pref mem [0xe1100000-0xe11fffff]
[    0.240175] pci_bus 0000:03: resource 0 io:  [0xb000-0xbfff]
[    0.240178] pci_bus 0000:03: resource 3 io:  [0x00-0xffff]
[    0.240181] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[    0.240225] NET: Registered protocol family 2
[    0.240339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.240693] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.241201] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.241432] TCP: Hash tables configured (established 131072 bind 65536)
[    0.241435] TCP reno registered
[    0.241540] NET: Registered protocol family 1
[    0.241563] pci 0000:00:02.0: Boot video device
[    0.241860] cpufreq-nforce2: No nForce2 chipset.
[    0.241896] Scanning for low memory corruption every 60 seconds
[    0.242021] audit: initializing netlink socket (disabled)
[    0.242034] type=2000 audit(1281578748.239:1): initialized
[    0.253163] highmem bounce pool size: 64 pages
[    0.253170] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.254847] VFS: Disk quotas dquot_6.5.2
[    0.254911] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.255570] fuse init (API version 7.13)
[    0.255661] msgmni has been set to 1689
[    0.255903] alg: No test for stdrng (krng)
[    0.255961] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.255965] io scheduler noop registered
[    0.255967] io scheduler anticipatory registered
[    0.255969] io scheduler deadline registered
[    0.256011] io scheduler cfq registered (default)
[    0.256148]   alloc irq_desc for 24 on node -1
[    0.256151]   alloc kstat_irqs on node -1
[    0.256161] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[    0.256170] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.256293]   alloc irq_desc for 25 on node -1
[    0.256295]   alloc kstat_irqs on node -1
[    0.256303] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[    0.256311] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.256400] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.256481] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.256581] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.256585] ACPI: Power Button [PWRB]
[    0.256645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.256648] ACPI: Power Button [PWRF]
[    0.257146] ACPI: SSDT 7f5e74c0 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20040311)
[    0.257361] processor LNXCPU:00: registered as cooling_device0
[    0.257566] ACPI: SSDT 7f5e7980 00152 (v01  PmRef  Cpu1Ist 00003000 INTL 20040311)
[    0.257788] processor LNXCPU:01: registered as cooling_device1
[    0.261331] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.261439] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.261820] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.263051] brd: module loaded
[    0.263569] loop: module loaded
[    0.263665] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.263763] ata_piix 0000:00:1f.2: version 2.13
[    0.263781]   alloc irq_desc for 19 on node -1
[    0.263783]   alloc kstat_irqs on node -1
[    0.263790] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.263795] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    0.263834] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.263916] scsi0 : ata_piix
[    0.263990] scsi1 : ata_piix
[    0.264709] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.264713] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.265072] Fixed MDIO Bus: probed
[    0.265113] PPP generic driver version 2.4.2
[    0.265154] tun: Universal TUN/TAP device driver, 1.6
[    0.265156] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    0.265247] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.265266]   alloc irq_desc for 23 on node -1
[    0.265268]   alloc kstat_irqs on node -1
[    0.265273] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.265286] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.265291] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.265326] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.265344] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[    0.269228] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    0.269270] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe1284000
[    0.269431] isapnp: Scanning for PnP cards...
[    0.283604] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.283703] usb usb1: configuration #1 chosen from 1 choice
[    0.283734] hub 1-0:1.0: USB hub found
[    0.283742] hub 1-0:1.0: 8 ports detected
[    0.283807] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.283822] uhci_hcd: USB Universal Host Controller Interface driver
[    0.283853] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    0.283859] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.283862] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.283901] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.283924] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e100
[    0.284017] usb usb2: configuration #1 chosen from 1 choice
[    0.284045] hub 2-0:1.0: USB hub found
[    0.284058] hub 2-0:1.0: 2 ports detected
[    0.284103] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.284109] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.284112] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.284147] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.284176] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e200
[    0.284267] usb usb3: configuration #1 chosen from 1 choice
[    0.284295] hub 3-0:1.0: USB hub found
[    0.284302] hub 3-0:1.0: 2 ports detected
[    0.284346]   alloc irq_desc for 18 on node -1
[    0.284348]   alloc kstat_irqs on node -1
[    0.284354] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.284359] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.284363] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.284397] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.284426] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e300
[    0.284524] usb usb4: configuration #1 chosen from 1 choice
[    0.284552] hub 4-0:1.0: USB hub found
[    0.284559] hub 4-0:1.0: 2 ports detected
[    0.284604] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.284610] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.284613] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.284645] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.284676] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e400
[    0.284764] usb usb5: configuration #1 chosen from 1 choice
[    0.284791] hub 5-0:1.0: USB hub found
[    0.284798] hub 5-0:1.0: 2 ports detected
[    0.284904] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.299979] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.299991] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.300096] mice: PS/2 mouse device common for all mice
[    0.300224] rtc_cmos 00:04: RTC can wake from S4
[    0.300267] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.300290] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.300417] device-mapper: uevent: version 1.0.3
[    0.318513] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx
[    0.331722] device-mapper: multipath: version 1.1.0 loaded
[    0.331727] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.331880] EISA: Probing bus 0 at eisa.0
[    0.331910] EISA: Detected 0 cards.
[    0.347685] cpuidle: using governor ladder
[    0.347689] cpuidle: using governor menu
[    0.348214] TCP cubic registered
[    0.348386] NET: Registered protocol family 10
[    0.348907] lo: Disabled Privacy Extensions
[    0.349279] NET: Registered protocol family 17
[    0.351091] Using IPI No-Shortcut mode
[    0.351204] PM: Resume from disk failed.
[    0.351216] registered taskstats version 1
[    0.351484]   Magic number: 6:634:55
[    0.351553] rtc_cmos 00:04: setting system clock to 2010-08-12 02:05:49 UTC (1281578749)
[    0.351557] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.351558] EDD information not available.
[    0.415864] Freeing initrd memory: 8090k freed
[    0.424937] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.463988] ata2.01: NODEV after polling detection
[    0.472180] ata2.00: ATAPI: ATAPI   DVD DD 2X16X4X16, G7L9, max UDMA/33
[    0.479794] ata1.00: HPA unlocked: 488395055 -> 488397168, native 488397168
[    0.479799] ata1.00: ATA-7: SAMSUNG HD252HJ, 1AC01113, max UDMA7
[    0.479802] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    0.488281] ata2.00: configured for UDMA/33
[    0.488361] ata1.00: configured for UDMA/133
[    0.623717] isapnp: No Plug & Play device found
[    0.623845] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD252HJ  1AC0 PQ: 0 ANSI: 5
[    0.623973] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    0.623983] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.624023] sd 0:0:0:0: [sda] Write Protect is off
[    0.624026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.624056] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.624204]  sda:
[    0.625962] scsi 1:0:0:0: CD-ROM            ATAPI    DVD DD 2X16X4X16 G7L9 PQ: 0 ANSI: 5
[    0.633623] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
[    0.633628] Uniform CD-ROM driver Revision: 3.20
[    0.633757] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.633802] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    0.647069]  sda1 sda2 sda3 < sda5 sda6 sda7 sda8 >
[    0.691575] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.691589] Freeing unused kernel memory: 656k freed
[    0.692010] Write protecting the kernel text: 4676k
[    0.692055] Write protecting the kernel read-only data: 1840k
[    0.709503] udev: starting version 151
[    0.791354] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.791376] r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.791449] r8169 0000:02:00.0: setting latency timer to 64
[    0.791493]   alloc irq_desc for 26 on node -1
[    0.791496]   alloc kstat_irqs on node -1
[    0.791510] r8169 0000:02:00.0: irq 26 for MSI/MSI-X
[    0.792222] eth0: RTL8102e at 0xf8052000, 00:1f:d0:c6:89:65, XID 14a00000 IRQ 26
[    0.887440] usb 4-1: new full speed USB device using uhci_hcd and address 2
[    1.055536] usb 4-1: configuration #1 chosen from 1 choice
[    1.474939] EXT4-fs (loop0): mounted filesystem with ordered data mode
[    8.867812] udev: starting version 151
[    9.045624] Linux agpgart interface v0.103
[    9.099736] agpgart-intel 0000:00:00.0: Intel G33 Chipset
[    9.100464] agpgart-intel 0000:00:00.0: detected 7164K stolen memory
[    9.131417] intel_rng: FWH not detected
[    9.132682] lp: driver loaded but no devices found
[    9.159389] parport_pc 00:08: reported by Plug and Play ACPI
[    9.159434] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    9.160721] usbcore: registered new interface driver usbserial
[    9.160736] USB Serial support registered for generic
[    9.160752] usbserial_generic 4-1:1.0: generic converter detected
[    9.160835] usb 4-1: generic converter now attached to ttyUSB0
[    9.160851] usbcore: registered new interface driver usbserial_generic
[    9.160853] usbserial: USB Serial Driver core
[    9.164252] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    9.200765] type=1505 audit(1281603958.348:2):  operation="profile_load" pid=581 name="/sbin/dhclient3"
[    9.201521] type=1505 audit(1281603958.348:3):  operation="profile_load" pid=581 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[    9.201925] type=1505 audit(1281603958.348:4):  operation="profile_load" pid=581 name="/usr/lib/connman/scripts/dhclient-script"
[    9.218239] USB Serial support registered for cp210x
[    9.218266] usbcore: registered new interface driver cp210x
[    9.218268] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[    9.220129] [drm] Initialized drm 1.1.0 20060810
[    9.254864] ppdev: user-space parallel port driver
[    9.256749] lp0: using parport0 (interrupt-driven).
[    9.274884] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.274891] i915 0000:00:02.0: setting latency timer to 64
[    9.289008]   alloc irq_desc for 27 on node -1
[    9.289013]   alloc kstat_irqs on node -1
[    9.289023] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[    9.289031] [drm] set up 7M of stolen space
[    9.289440] [drm] initialized overlay support
[    9.355410] psmouse serio1: ID: 10 00 64
[    9.364528] i2c i2c-0: sendbytes: error -110
[    9.378456] fb0: inteldrmfb frame buffer device
[    9.378459] registered panic notifier
[    9.378481] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.378564] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.378586] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    9.385377] vga16fb: initializing
[    9.385381] vga16fb: mapped to 0xc00a0000
[    9.385386] vga16fb: not registering due to another framebuffer present
[    9.459386] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
[    9.499919] Console: switching to colour frame buffer device 128x48
[    9.973933] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[   10.800913] Adding 261112k swap on /host/ubuntu/disks/swap.disk.  Priority:-1 extents:2 across:972584k 
[   10.936630] type=1505 audit(1281603960.084:5):  operation="profile_load" pid=774 name="/usr/share/gdm/guest-session/Xsession"
[   10.939607] type=1505 audit(1281603960.084:6):  operation="profile_replace" pid=775 name="/sbin/dhclient3"
[   10.940459] type=1505 audit(1281603960.088:7):  operation="profile_replace" pid=775 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   10.940872] type=1505 audit(1281603960.088:8):  operation="profile_replace" pid=775 name="/usr/lib/connman/scripts/dhclient-script"
[   10.948671] type=1505 audit(1281603960.096:9):  operation="profile_load" pid=777 name="/usr/bin/evince"
[   10.962086] type=1505 audit(1281603960.108:10):  operation="profile_load" pid=777 name="/usr/bin/evince-previewer"
[   10.968703] type=1505 audit(1281603960.116:11):  operation="profile_load" pid=777 name="/usr/bin/evince-thumbnailer"
[   10.985798] r8169: eth0: link down
[   10.986029] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   25.868007] i2c i2c-0: sendbytes: error -110
[   26.840007] i2c i2c-0: sendbytes: error -110
[   31.588006] i2c i2c-0: sendbytes: error -110
[   88.631582] __ratelimit: 9 callbacks suppressed
[   88.631588] type=1503 audit(1281604037.776:15):  operation="open" pid=1453 parent=1450 profile="/usr/sbin/cupsd" requested_mask="w::" denied_mask="w::" fsuid=0 ouid=0 name="/dev/ttyUSB0"
[  484.760045] usb 4-1: USB disconnect, address 2
[  484.760376] generic ttyUSB0: generic converter now disconnected from ttyUSB0
[  484.760403] usbserial_generic 4-1:1.0: device disconnected
[  487.300016] usb 4-1: new full speed USB device using uhci_hcd and address 3
[  487.463347] usb 4-1: configuration #1 chosen from 1 choice
[  487.470083] usbserial_generic 4-1:1.0: cp210x converter detected
[  487.580018] usb 4-1: reset full speed USB device using uhci_hcd and address 3
[  487.727328] usb 4-1: cp210x converter now attached to ttyUSB0
[ 1174.944043] usb 4-1: USB disconnect, address 3
[ 1174.944287] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 1174.944313] usbserial_generic 4-1:1.0: device disconnected
[ 1178.096022] usb 4-1: new full speed USB device using uhci_hcd and address 4
[ 1178.259385] usb 4-1: configuration #1 chosen from 1 choice
[ 1178.266088] usbserial_generic 4-1:1.0: cp210x converter detected
[ 1178.376018] usb 4-1: reset full speed USB device using uhci_hcd and address 4
[ 1178.523367] usb 4-1: cp210x converter now attached to ttyUSB0
[ 1520.656043] usb 4-1: USB disconnect, address 4
[ 1520.656289] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 1520.656316] usbserial_generic 4-1:1.0: device disconnected
[ 1529.520088] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 1529.688155] usb 2-1: configuration #1 chosen from 1 choice
[ 1529.694555] usbserial_generic 2-1:1.0: cp210x converter detected
[ 1529.804017] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[ 1529.956139] usb 2-1: cp210x converter now attached to ttyUSB0
[ 1634.488044] usb 2-1: USB disconnect, address 2
[ 1634.488290] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[ 1634.488317] usbserial_generic 2-1:1.0: device disconnected
[ 2284.668023] usb 4-1: new full speed USB device using uhci_hcd and address 5
[ 2284.836149] usb 4-1: configuration #1 chosen from 1 choice
[ 2284.842071] usbserial_generic 4-1:1.0: cp210x converter detected
[ 2284.952019] usb 4-1: reset full speed USB device using uhci_hcd and address 5
[ 2285.104136] usb 4-1: cp210x converter now attached to ttyUSB0

Module                  Size  Used by
binfmt_misc             6587  1 
snd_hda_codec_realtek   203168  1 
fbcon                  35102  71 
tileblit                2031  1 fbcon
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
softcursor              1189  1 bitblit
vga16fb                11385  0 
vgastate                8961  1 vga16fb
snd_hda_intel          21877  2 
snd_hda_codec          74201  2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0 
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0 
snd_seq_oss            26726  0 
snd_seq_midi            4557  0 
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i915                  282354  3 
drm_kms_helper         29297  1 i915
cp210x                 11546  0 
ppdev                   5259  0 
drm                   162471  4 i915,drm_kms_helper
snd                    54148  16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse                63245  0 
parport_pc             25962  1 
usbserial              33019  1 cp210x
intel_agp              24177  2 i915
serio_raw               3978  0 
lp                      7028  0 
i2c_algo_bit            5028  1 i915
agpgart                31724  2 drm,intel_agp
parport                32635  3 ppdev,parport_pc,lp
video                  17375  1 i915
output                  1871  1 video
soundcore               6620  1 snd
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
r8169                  33884  0 
mii                     4381  1 r8169

[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux