Hi
I would like make my FAX run.
But, I have trouble for install the drivers.
Here below the log from scanModem.
Hope I done as I should :-) BORDER=0>
Thanks.
-------------------------- System information
----------------------------
CPU=i686, Ubuntu , ALSA_version=1.0.21
Linux version 2.6.32-24-generic (buildd@rothera) (gcc version 4.4.3
(Ubuntu 4.4.3-4ubuntu5) ) #39-Ubuntu SMP Wed Jul 28 06:07:29 UTC 2010
scanModem update of: 2010_05_29
Distrib_ID=Ubuntu
DistribCodeName=lucid
The dkms driver upgrade utilities are installed,
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
snd_via82xx_modem
Attached USB devices are:
ID 046d:c045 Logitech, Inc. Optical Mouse
ID 046d:08a9 Logitech, Inc. Notebook Deluxe
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
00:0a.0 Communication controller: Agere Systems V.92 56K WinModem (rev
03)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
High Definition Audio cards can host modem chips.
For candidate card in slot 00:0a.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:0a.0 11c1:048c 11c1:044c Communication controller: Agere Systems V.92
56K WinModem
Modem interrupt assignment and sharing:
15: 0 IO-APIC-edge pata_via
--- Bootup diagnostics for card in PCI slot 00:0a.0 ----
[ 0.146761] pci 0000:00:0a.0: reg 10 32bit mmio:
[0xe6000000-0xe60000ff]
[ 0.146768] pci 0000:00:0a.0: reg 14 io port: [0xa000-0xa007]
[ 0.146775] pci 0000:00:0a.0: reg 18 io port: [0xa400-0xa4ff]
[ 0.146804] pci 0000:00:0a.0: supports D2
[ 0.146807] pci 0000:00:0a.0: PME# supported from D2 D3hot D3cold
[ 0.146812] pci 0000:00:0a.0: PME# disabled
The PCI slot 00:0a.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
For candidate card in slot 00:11.6, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
00:11.6 1106:3068 Communication controller: VIA Technologies, Inc. AC'97
Modem Controller
Modem interrupt assignment and sharing:
22: 106 IO-APIC-fasteoi VIA8237
--- Bootup diagnostics for card in PCI slot 00:11.6 ----
[ 0.147580] pci 0000:00:11.6: reg 10 io port: [0xdc00-0xdcff]
[ 7.822919] VIA 82xx Modem 0000:00:11.6: enabling device (0000 ->
0001)
[ 7.823394] VIA 82xx Modem 0000:00:11.6: PCI INT C -> Link[ALKC] ->
GSI 22 (level, low) -> IRQ 22
[ 8.572052] VIA 82xx Modem 0000:00:11.6: setting latency timer to 64
[ 9.076291] VIA 82xx Modem 0000:00:11.6: PCI INT C disabled
[ 9.076319] VIA 82xx Modem: probe of 0000:00:11.6 failed with error
-13
The PCI slot 00:11.6 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
PCIbus=00:11.6
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem
Controller (rev 80)
Flags: medium devsel, IRQ 22
I/O ports at dc00 [size=256]
Capabilities: [d0] Power Management version 2
Kernel modules: snd-via82xx-modem
===== Advanced Linux Sound Architecture (ALSA) diagnostics =====
The ALSA packages provide audio support and also drivers for some
modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The modem cards detected by "aplay -l" are: None
The /proc/asound/pcm file reports:
-----------------------
00-00: VIA 8237 : VIA 8237 : playback 4 : capture 1
00-01: VIA 8237 : VIA 8237 : playback 1 : capture 1
01-00: USB Audio : USB Audio : capture 1
about /proc/asound/cards:
------------------------
0 [V8237 ]: VIA8237 - VIA 8237
VIA 8237 with ALC658D at 0xd800, irq 22
1 [default ]: USB-Audio - Camera
Camera at usb-0000:00:10.1-1, full speed
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 00:0a.0:
Modem chipset detected on
NAME="Communication controller: Agere Systems V.92 56K WinModem "
CLASS=0780
PCIDEV=11c1:048c
SUBSYS=11c1:044c
IRQ=5
IDENT=agrsm
For candidate modem in: 00:0a.0
0780 Communication controller: Agere Systems V.92 56K WinModem
Primary device ID: 11c1:048c
Support type needed or chipset: agrsm
The AgereSystems/LSI agrsm code supports compiling of a agrmodem +
agrserial driver pair.
There are a few different chipsets which use this driver pair, but they
use different code resources:
Chipsets KV* PackageNames (most current as of November 2009)
----------------------------------------------------------------------------------------------
11c1:048c and 11c1:048f 2.6.29
agrsm048pci-2.1.60_20100108_i386.deb or
agrsm048pci-2.1.60_20100108.tar.gz
11c1:0620 2.6.31
agrsm06pci-2.1.80_20100106_i386.deb or
agrsm06pci-2.1.80~20100106.tar.gz !!
11c11040 (on HDA audio cards) 2.6.31 agrsm-11c11040_20091225_i386.deb
or agrsm-11c11040-2.1.80~20091225.tar.bz2 !!
All available at:
http://linmodems.technion.ac.il/packages/ltmodem/11c11040/
Additionally there are;
automation & testing agrsm-tools_0.0.1_all.deb or
agrsm-tools-0.0.1-2.noarch.rpm
General background agrsm_howto.txt
------------------------------------------------------------------------------------------------
* KV == latest kernel release with a reported success
!! Latest update with major credit to Nikolay Zhuravlev
But see conflict issue:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg02753.html
For the 11c11040 chip with kernels 2.6.31 and later a change in a
modules loading settingmay be necessary.
Within the file /etc/modprobe.d/alsa-base.conf (or equivalent for
your Distro), change the phrase:
options snd-hda-intel power_save=10
to:
options snd-hda-intel power_save=0
or the agrsm drivers will not function. For Ubuntu related systems
this can be done with:
$ sudo gedit /etc/modprobe.d/alsa-base.conf
Report from Bjorn Wielens:
Please note- trying to load the modules on a OpenSuSE 11.2 system gives
an error about the module_version symbol. Using:
# modprobe --force agrmodem
# modprobe --force agrserial
is necessary to load the drivers, and does not appear to cause ill
effects.
All of the above packages are dkms competent. This means that if your
Linux distros dkms package
is previously installed, if provides for future updates matching
forthcoming kernels.
-------------- end Agere Systems section -------------------
