Re: agustanto, indonesia kernel 2.6.32-24-generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Agustano

 PCI slot       PCI ID          SubsystemID     Name
 ----------     ---------       ---------       --------------
 00:1f.6        8086:24c6       1179:0001       Modem: Intel
Corporation 82801DB/DBL/DBM
=====
is know to be supported by the combination of the a slmodemd helper
utility, and a
snd-intel8x0m ALSA modem driver,

However it did not autoload on your System, because of
 [    0.165498] serial 0000:00:1f.6: PCI INT B disabled
normally controlled through Interrupt 4.

Please read the Bootup.txt to correct this problem.
There is no chance of modem service until bus 0000:00:1f is enabled.


Please continue to send messages to the List, not directly to me.

MarvS
scanModem maintainer



On Thu, Aug 5, 2010 at 11:34 AM, agustanto ramdhani
<agustanto.ramdhani@xxxxxxxxx> wrote:
> --------------------------  System information
> ----------------------------
> CPU=i686,  Ubuntu ,  ALSA_version=1.0.21
> Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3
> (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010
>  scanModem update of:  2010_05_29
>
> Distrib_ID=Ubuntu
> DistribCodeName=lucid
> AptRepositoryStem=http://kambing.ui.ac.id/ubuntu/
>
>
> The dkms driver upgrade utilities are installed,
>
>  There are no blacklisted modem drivers in /etc/modprobe*  files
>
>  Potentially useful modem drivers now loaded are:
>
>
> Attached USB devices are:
>  ID 0eab:511f
> If a cellphone is not detected, see
> http://ubuntuforums.org/archive/index.php/t-878554.html
> A sample report is:
> http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
>
> If a USB modem or cellphone is attached and was not detected, please
> provide available information in your request to discuss@xxxxxxxxxxxxx
>
> Candidate PCI devices with modem chips are:
> 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
> AC'97 Modem Controller (rev 03)
> High Definition Audio cards can host modem chips.
>
> For candidate card in slot 00:1f.6, firmware information and bootup
> diagnostics are:
>  PCI slot       PCI ID          SubsystemID     Name
>  ----------     ---------       ---------       --------------
>  00:1f.6        8086:24c6       1179:0001       Modem: Intel Corporation 82801DB/DBL/DBM
>
>  Modem interrupt assignment and sharing:
>  4:         99    XT-PIC-XT        Intel 82801DB-ICH4
>  --- Bootup diagnostics for card in PCI slot 00:1f.6 ----
> [    0.065139] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
> [    0.065146] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
> [    0.065184] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [    0.065189] pci 0000:00:1f.6: PME# disabled
> [    0.165489] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4
> (level, low) -> IRQ 4
> [    0.165498] serial 0000:00:1f.6: PCI INT B disabled
>
>  // dmsg.txt
>           CPU0
>  0:      45563    XT-PIC-XT        timer
>  1:        240    XT-PIC-XT        i8042
>  2:          0    XT-PIC-XT        cascade
>  3:       1068    XT-PIC-XT        uhci_hcd:usb2, ohci1394, yenta
>  4:         99    XT-PIC-XT        Intel 82801DB-ICH4
>  5:          1    XT-PIC-XT        parport0
>  7:        106    XT-PIC-XT        ehci_hcd:usb1
>  8:          0    XT-PIC-XT        rtc0
>  9:         82    XT-PIC-XT        acpi
>  10:      21441    XT-PIC-XT        nvidia
>  11:        257    XT-PIC-XT        uhci_hcd:usb3, eth1, eth0
>  12:      41294    XT-PIC-XT        i8042
>  14:       9176    XT-PIC-XT        ata_piix
>  15:       5352    XT-PIC-XT        ata_piix
> NMI:          0   Non-maskable interrupts
> LOC:          0   Local timer interrupts
> SPU:          0   Spurious interrupts
> PMI:          0   Performance monitoring interrupts
> PND:          0   Performance pending work
> RES:          0   Rescheduling interrupts
> CAL:          0   Function call interrupts
> TLB:          0   TLB shootdowns
> TRM:          0   Thermal event interrupts
> THR:          0   Threshold APIC interrupts
> MCE:          0   Machine check exceptions
> MCP:          2   Machine check polls
> ERR:          0
> MIS:          0
>
> [    0.000000] Initializing cgroup subsys cpuset
> [    0.000000] Initializing cgroup subsys cpu
> [    0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc
> version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5
> 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
> [    0.000000] KERNEL supported cpus:
> [    0.000000]   Intel GenuineIntel
> [    0.000000]   AMD AuthenticAMD
> [    0.000000]   NSC Geode by NSC
> [    0.000000]   Cyrix CyrixInstead
> [    0.000000]   Centaur CentaurHauls
> [    0.000000]   Transmeta GenuineTMx86
> [    0.000000]   Transmeta TransmetaCPU
> [    0.000000]   UMC UMC UMC UMC
> [    0.000000] BIOS-provided physical RAM map:
> [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> [    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000000d0000 - 00000000000d4000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000
> (reserved)
> [    0.000000]  BIOS-e820: 0000000000100000 - 000000001ff60000 (usable)
> [    0.000000]  BIOS-e820: 000000001ff60000 - 000000001ff6a000 (ACPI
> data)
> [    0.000000]  BIOS-e820: 000000001ff6a000 - 000000001ff6b000
> (reserved)
> [    0.000000]  BIOS-e820: 000000001ff6b000 - 000000001ff70000 (ACPI
> NVS)
> [    0.000000]  BIOS-e820: 000000001ff70000 - 0000000020000000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000ffb80000 - 00000000ffc00000
> (reserved)
> [    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000
> (reserved)
> [    0.000000] DMI present.
> [    0.000000] last_pfn = 0x1ff60 max_arch_pfn = 0x100000
> [    0.000000] MTRR default type: uncachable
> [    0.000000] MTRR fixed ranges enabled:
> [    0.000000]   00000-9FFFF write-back
> [    0.000000]   A0000-BFFFF uncachable
> [    0.000000]   C0000-CFFFF write-protect
> [    0.000000]   D0000-D3FFF write-back
> [    0.000000]   D4000-D7FFF write-protect
> [    0.000000]   D8000-DFFFF uncachable
> [    0.000000]   E0000-E3FFF write-back
> [    0.000000]   E4000-FFFFF write-protect
> [    0.000000] MTRR variable ranges enabled:
> [    0.000000]   0 base 000000000 mask FE0000000 write-back
> [    0.000000]   1 disabled
> [    0.000000]   2 disabled
> [    0.000000]   3 disabled
> [    0.000000]   4 disabled
> [    0.000000]   5 disabled
> [    0.000000]   6 disabled
> [    0.000000]   7 disabled
> [    0.000000] PAT not supported by CPU.
> [    0.000000] e820 update range: 0000000000002000 - 0000000000006000
> (usable) ==> (reserved)
> [    0.000000] Scanning 1 areas for low memory corruption
> [    0.000000] modified physical RAM map:
> [    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
> [    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
> [    0.000000]  modified: 0000000000006000 - 000000000009f800 (usable)
> [    0.000000]  modified: 000000000009f800 - 00000000000a0000 (reserved)
> [    0.000000]  modified: 00000000000d0000 - 00000000000d4000 (reserved)
> [    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
> [    0.000000]  modified: 0000000000100000 - 000000001ff60000 (usable)
> [    0.000000]  modified: 000000001ff60000 - 000000001ff6a000 (ACPI
> data)
> [    0.000000]  modified: 000000001ff6a000 - 000000001ff6b000 (reserved)
> [    0.000000]  modified: 000000001ff6b000 - 000000001ff70000 (ACPI NVS)
> [    0.000000]  modified: 000000001ff70000 - 0000000020000000 (reserved)
> [    0.000000]  modified: 00000000ffb80000 - 00000000ffc00000 (reserved)
> [    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
> [    0.000000] initial memory mapped : 0 - 00c00000
> [    0.000000] init_memory_mapping: 0000000000000000-000000001ff60000
> [    0.000000] Using x86 segment limits to approximate NX protection
> [    0.000000]  0000000000 - 0000400000 page 4k
> [    0.000000]  0000400000 - 001fc00000 page 2M
> [    0.000000]  001fc00000 - 001ff60000 page 4k
> [    0.000000] kernel direct mapping tables up to 1ff60000 @ 7000-c000
> [    0.000000] RAMDISK: 1f364000 - 1ff4fc85
> [    0.000000] ACPI: RSDP 000f7a10 00014 (v00 TOSHIB)
> [    0.000000] ACPI: RSDT 1ff63fd8 00034 (v01 TOSHIB 750      00970814
> MASM 06110000)
> [    0.000000] ACPI: FACP 1ff69d03 00084 (v02 TOSHIB 750      20030101
> MASM 61100000)
> [    0.000000] ACPI: DSDT 1ff6400c 05CF7 (v01 TOSHIB A0007    20030806
> MSFT 0100000E)
> [    0.000000] ACPI: FACS 1ff6bfc0 00040
> [    0.000000] ACPI: SSDT 1ff69d87 0021D (v01 TOSHIB A0007    00970814
> MSFT 0100000E)
> [    0.000000] ACPI: DBGP 1ff69fa4 00034 (v01 TOSHIB 750      00970814
> MASM 61100000)
> [    0.000000] ACPI: BOOT 1ff69fd8 00028 (v01 TOSHIB 750      00970814
> MASM 06110000)
> [    0.000000] 0MB HIGHMEM available.
> [    0.000000] 511MB LOWMEM available.
> [    0.000000]   mapped low ram: 0 - 1ff60000
> [    0.000000]   low ram: 0 - 1ff60000
> [    0.000000]   node 0 low ram: 00000000 - 1ff60000
> [    0.000000]   node 0 bootmap 00008000 - 0000bfec
> [    0.000000] (9 early reservations) ==> bootmem [0000000000 -
> 001ff60000]
> [    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==>
> [0000000000 - 0000001000]
> [    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==>
> [0000001000 - 0000002000]
> [    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==>
> [0000006000 - 0000007000]
> [    0.000000]   #3 [0000100000 - 00008dbeb8]    TEXT DATA BSS ==>
> [0000100000 - 00008dbeb8]
> [    0.000000]   #4 [001f364000 - 001ff4fc85]          RAMDISK ==>
> [001f364000 - 001ff4fc85]
> [    0.000000]   #5 [000009f800 - 0000100000]    BIOS reserved ==>
> [000009f800 - 0000100000]
> [    0.000000]   #6 [00008dc000 - 00008df1cc]              BRK ==>
> [00008dc000 - 00008df1cc]
> [    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==>
> [0000007000 - 0000008000]
> [    0.000000]   #8 [0000008000 - 000000c000]          BOOTMAP ==>
> [0000008000 - 000000c000]
> [    0.000000] Zone PFN ranges:
> [    0.000000]   DMA      0x00000000 -> 0x00001000
> [    0.000000]   Normal   0x00001000 -> 0x0001ff60
> [    0.000000]   HighMem  0x0001ff60 -> 0x0001ff60
> [    0.000000] Movable zone start PFN for each node
> [    0.000000] early_node_map[3] active PFN ranges
> [    0.000000]     0: 0x00000000 -> 0x00000002
> [    0.000000]     0: 0x00000006 -> 0x0000009f
> [    0.000000]     0: 0x00000100 -> 0x0001ff60
> [    0.000000] On node 0 totalpages: 130811
> [    0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map
> c1001000
> [    0.000000]   DMA zone: 32 pages used for memmap
> [    0.000000]   DMA zone: 0 pages reserved
> [    0.000000]   DMA zone: 3963 pages, LIFO batch:0
> [    0.000000]   Normal zone: 991 pages used for memmap
> [    0.000000]   Normal zone: 125825 pages, LIFO batch:31
> [    0.000000] Using APIC driver default
> [    0.000000] ACPI: PM-Timer IO Port: 0x1008
> [    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
> [    0.000000] Local APIC disabled by BIOS -- you can enable it with
> "lapic"
> [    0.000000] APIC: disable apic facility
> [    0.000000] nr_irqs_gsi: 16
> [    0.000000] PM: Registered nosave memory: 0000000000002000 -
> 0000000000006000
> [    0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> [    0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000d0000
> [    0.000000] PM: Registered nosave memory: 00000000000d0000 -
> 00000000000d4000
> [    0.000000] PM: Registered nosave memory: 00000000000d4000 -
> 00000000000e0000
> [    0.000000] PM: Registered nosave memory: 00000000000e0000 -
> 0000000000100000
> [    0.000000] Allocating PCI resources starting at 20000000 (gap:
> 20000000:dfb80000)
> [    0.000000] Booting paravirtualized kernel on bare hardware
> [    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
> [    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288
> u4194304
> [    0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304
> [    0.000000] pcpu-alloc: [0] 0
> [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
> Total pages: 129788
> [    0.000000] Kernel command line:
> root=UUID=92632947-46db-4876-a96e-bd0ed1f661e2 ro quiet splash
> [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
> [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144
> bytes)
> [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072
> bytes)
> [    0.000000] Enabling fast FPU save and restore... done.
> [    0.000000] Enabling unmasked SIMD FPU exception support... done.
> [    0.000000] Initializing CPU#0
> [    0.000000] allocated 2618240 bytes of page_cgroup
> [    0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> [    0.000000] Initializing HighMem for node 0 (00000000:00000000)
> [    0.000000] Memory: 495564k/523648k available (4679k kernel code,
> 27428k reserved, 2116k data, 660k init, 0k highmem)
> [    0.000000] virtual kernel memory layout:
> [    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
> [    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
> [    0.000000]     vmalloc : 0xe0760000 - 0xff7fe000   ( 496 MB)
> [    0.000000]     lowmem  : 0xc0000000 - 0xdff60000   ( 511 MB)
> [    0.000000]       .init : 0xc07a3000 - 0xc0848000   ( 660 kB)
> [    0.000000]       .data : 0xc0591d23 - 0xc07a2e88   (2116 kB)
> [    0.000000]       .text : 0xc0100000 - 0xc0591d23   (4679 kB)
> [    0.000000] Checking if this processor honours the WP bit even in
> supervisor mode...Ok.
> [    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0,
> CPUs=1, Nodes=1
> [    0.000000] Hierarchical RCU implementation.
> [    0.000000] NR_IRQS:2304 nr_irqs:256
> [    0.000000] Console: colour VGA+ 80x25
> [    0.000000] console [tty0] enabled
> [    0.000000] Fast TSC calibration using PIT
> [    0.000000] Detected 1596.081 MHz processor.
> [    0.008005] Calibrating delay loop (skipped), value calculated using
> timer frequency.. 3192.16 BogoMIPS (lpj=6384324)
> [    0.008027] Security Framework initialized
> [    0.008060] AppArmor: AppArmor initialized
> [    0.008069] Mount-cache hash table entries: 512
> [    0.008222] Initializing cgroup subsys ns
> [    0.008228] Initializing cgroup subsys cpuacct
> [    0.008233] Initializing cgroup subsys memory
> [    0.008245] Initializing cgroup subsys devices
> [    0.008248] Initializing cgroup subsys freezer
> [    0.008251] Initializing cgroup subsys net_cls
> [    0.008279] CPU: L1 I cache: 32K, L1 D cache: 32K
> [    0.008283] CPU: L2 cache: 1024K
> [    0.008288] mce: CPU supports 5 MCE banks
> [    0.008303] Performance Events:
> [    0.008306] no APIC, boot with the "lapic" boot parameter to
> force-enable it.
> [    0.008309] no hardware sampling interrupt available.
> [    0.008312] p6 PMU driver.
> [    0.008330] ... version:                0
> [    0.008332] ... bit width:              32
> [    0.008335] ... generic registers:      2
> [    0.008337] ... value mask:             00000000ffffffff
> [    0.008340] ... max period:             000000007fffffff
> [    0.008343] ... fixed-purpose events:   0
> [    0.008345] ... event mask:             0000000000000003
> [    0.008350] Checking 'hlt' instruction... OK.
> [    0.025007] SMP alternatives: switching to UP code
> [    0.033508] Freeing SMP alternatives: 19k freed
> [    0.033519] ACPI: Core revision 20090903
> [    0.045005] ACPI: setting ELCR to 0200 (from 0c98)
> [    0.045140] ftrace: converting mcount calls to 0f 1f 44 00 00
> [    0.045145] ftrace: allocating 21780 entries in 43 pages
> [    0.048117] Enabling APIC mode:  Flat.  Using 0 I/O APICs
> [    0.048123] weird, boot CPU (#0) not listed by the BIOS.
> [    0.048126] SMP motherboard not detected.
> [    0.048130] Local APIC not detected. Using dummy APIC emulation.
> [    0.048133] SMP disabled
> [    0.048361] Brought up 1 CPUs
> [    0.048366] Total of 1 processors activated (3192.16 BogoMIPS).
> [    0.049537] CPU0 attaching NULL sched-domain.
> [    0.049725] devtmpfs: initialized
> [    0.050232] regulator: core version 0.5
> [    0.052030] Time: 15:22:27  Date: 08/05/10
> [    0.052091] NET: Registered protocol family 16
> [    0.052235] EISA bus registered
> [    0.052245] ACPI: bus type pci registered
> [    0.052526] PCI: PCI BIOS revision 2.10 entry at 0xfd981, last bus=4
> [    0.052529] PCI: Using configuration type 1 for base access
> [    0.053732] bio: create slab <bio-0> at 0
> [    0.054736] ACPI: EC: Look up EC in DSDT
> [    0.056917] ACPI Warning: Package List length (0x10) larger than
> NumElements count (0x6), truncated
> [    0.056923]  (20090903/dsobject-515)
> [    0.058577] ACPI: Interpreter enabled
> [    0.058589] ACPI: (supports S0 S3 S4 S5)
> [    0.058614] ACPI: Using PIC for interrupt routing
> [    0.060153] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC
> function
> [    0.064041] ACPI: Power Resource [PFAN] (off)
> [    0.064235] ACPI: No dock devices found.
> [    0.064502] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [    0.064550] pci 0000:00:00.0: reg 10 32bit mmio pref:
> [0xd0000000-0xdfffffff]
> [    0.064668] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f]
> [    0.064722] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f]
> [    0.064784] pci 0000:00:1d.7: reg 10 32bit mmio:
> [0xc0000000-0xc00003ff]
> [    0.064843] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [    0.064849] pci 0000:00:1d.7: PME# disabled
> [    0.064939] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4
> ACPI/GPIO/TCO
> [    0.064944] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4
> GPIO
> [    0.064969] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
> [    0.064976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
> [    0.064984] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
> [    0.064991] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
> [    0.064999] pci 0000:00:1f.1: reg 20 io port: [0x1840-0x184f]
> [    0.065007] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
> [    0.065051] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
> [    0.065058] pci 0000:00:1f.5: reg 14 io port: [0x1880-0x18bf]
> [    0.065065] pci 0000:00:1f.5: reg 18 32bit mmio:
> [0xc0000c00-0xc0000dff]
> [    0.065073] pci 0000:00:1f.5: reg 1c 32bit mmio:
> [0xc0000800-0xc00008ff]
> [    0.065103] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
> [    0.065108] pci 0000:00:1f.5: PME# disabled
> [    0.065139] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
> [    0.065146] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
> [    0.065184] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
> [    0.065189] pci 0000:00:1f.6: PME# disabled
> [    0.065226] pci 0000:01:00.0: reg 10 32bit mmio:
> [0xc1000000-0xc1ffffff]
> [    0.065232] pci 0000:01:00.0: reg 14 32bit mmio pref:
> [0xe0000000-0xefffffff]
> [    0.065251] pci 0000:01:00.0: reg 30 32bit mmio pref:
> [0x000000-0x01ffff]
> [    0.065304] pci 0000:00:01.0: bridge 32bit mmio:
> [0xc1000000-0xc1ffffff]
> [    0.065308] pci 0000:00:01.0: bridge 32bit mmio pref:
> [0xe0000000-0xefffffff]
> [    0.065352] pci 0000:02:07.0: reg 10 32bit mmio:
> [0xc2006000-0xc20067ff]
> [    0.065359] pci 0000:02:07.0: reg 14 32bit mmio:
> [0xc2000000-0xc2003fff]
> [    0.065400] pci 0000:02:07.0: supports D1 D2
> [    0.065403] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.065408] pci 0000:02:07.0: PME# disabled
> [    0.065439] pci 0000:02:08.0: reg 10 32bit mmio:
> [0xc2004000-0xc2004fff]
> [    0.065446] pci 0000:02:08.0: reg 14 io port: [0x3000-0x303f]
> [    0.065483] pci 0000:02:08.0: supports D1 D2
> [    0.065486] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.065491] pci 0000:02:08.0: PME# disabled
> [    0.065525] pci 0000:02:0a.0: reg 10 32bit mmio:
> [0xc2005000-0xc2005fff]
> [    0.065603] pci 0000:02:0b.0: reg 10 32bit mmio: [0x000000-0x000fff]
> [    0.065624] pci 0000:02:0b.0: supports D1 D2
> [    0.065627] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.065632] pci 0000:02:0b.0: PME# disabled
> [    0.065668] pci 0000:02:0d.0: reg 10 32bit mmio:
> [0xc2006800-0xc20069ff]
> [    0.065714] pci 0000:02:0d.0: supports D1 D2
> [    0.065717] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.065722] pci 0000:02:0d.0: PME# disabled
> [    0.065750] pci 0000:00:1e.0: transparent bridge
> [    0.065755] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff]
> [    0.065760] pci 0000:00:1e.0: bridge 32bit mmio:
> [0xc2000000-0xc20fffff]
> [    0.065790] pci_bus 0000:00: on NUMA node 0
> [    0.065795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [    0.065836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
> [    0.065870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
> [    0.067978] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 11)
> [    0.068133] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 11)
> [    0.068248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11) *0,
> disabled.
> [    0.068392] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11)
> [    0.068530] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *11)
> [    0.068667] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 11)
> [    0.068803] ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
> [    0.068938] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *7 11)
> [    0.069080] vgaarb: device added: PCI:0000:01:00.0,decodes=io
> +mem,owns=io+mem,locks=none
> [    0.069086] vgaarb: loaded
> [    0.069239] SCSI subsystem initialized
> [    0.069303] libata version 3.00 loaded.
> [    0.069398] usbcore: registered new interface driver usbfs
> [    0.069417] usbcore: registered new interface driver hub
> [    0.069447] usbcore: registered new device driver usb
> [    0.069606] ACPI: WMI: Mapper loaded
> [    0.069609] PCI: Using ACPI for IRQ routing
> [    0.069802] NetLabel: Initializing
> [    0.069804] NetLabel:  domain hash size = 128
> [    0.069807] NetLabel:  protocols = UNLABELED CIPSOv4
> [    0.069824] NetLabel:  unlabeled traffic allowed by default
> [    0.069870] Switching to clocksource tsc
> [    0.072001] AppArmor: AppArmor Filesystem Enabled
> [    0.072001] pnp: PnP ACPI init
> [    0.072001] ACPI: bus type pnp registered
> [    0.072630] pnp: PnP ACPI: found 11 devices
> [    0.072634] ACPI: ACPI bus type pnp unregistered
> [    0.072639] PnPBIOS: Disabled by ACPI PNP
> [    0.072653] system 00:00: iomem range 0x0-0x9ffff could not be
> reserved
> [    0.072657] system 00:00: iomem range 0xe0000-0xeffff could not be
> reserved
> [    0.072661] system 00:00: iomem range 0xf0000-0xfffff could not be
> reserved
> [    0.072665] system 00:00: iomem range 0x100000-0x1ff5ffff could not
> be reserved
> [    0.072669] system 00:00: iomem range 0x1ff60000-0x1ff6bfff could not
> be reserved
> [    0.072673] system 00:00: iomem range 0x1ff6c000-0x1ff6ffff could not
> be reserved
> [    0.072677] system 00:00: iomem range 0x1ff70000-0x1ff7ffff has been
> reserved
> [    0.072681] system 00:00: iomem range 0x1ff80000-0x1fffffff has been
> reserved
> [    0.072684] system 00:00: iomem range 0xffb80000-0xffbfffff has been
> reserved
> [    0.072688] system 00:00: iomem range 0xfff80000-0xffffffff has been
> reserved
> [    0.072701] system 00:0a: ioport range 0x1e0-0x1e7 has been reserved
> [    0.072705] system 00:0a: ioport range 0x480-0x48f has been reserved
> [    0.072708] system 00:0a: ioport range 0x680-0x6ff has been reserved
> [    0.072712] system 00:0a: ioport range 0x1000-0x107f has been
> reserved
> [    0.072716] system 00:0a: ioport range 0x10ac-0x10ac has been
> reserved
> [    0.072720] system 00:0a: ioport range 0x1100-0x111f has been
> reserved
> [    0.072724] system 00:0a: ioport range 0x1180-0x11bf has been
> reserved
> [    0.072728] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
> [    0.072732] system 00:0a: ioport range 0xe000-0xe07f has been
> reserved
> [    0.072736] system 00:0a: ioport range 0xe080-0xe0ff has been
> reserved
> [    0.072739] system 00:0a: ioport range 0xe400-0xe47f has been
> reserved
> [    0.072752] system 00:0a: ioport range 0xe480-0xe4ff has been
> reserved
> [    0.072756] system 00:0a: ioport range 0xe800-0xe87f has been
> reserved
> [    0.072760] system 00:0a: ioport range 0xe880-0xe8ff has been
> reserved
> [    0.072764] system 00:0a: ioport range 0xec00-0xec7f has been
> reserved
> [    0.072768] system 00:0a: ioport range 0xec80-0xecff has been
> reserved
> [    0.107518] pci 0000:01:00.0: BAR 6: can't allocate mem resource
> [0xf0000000-0xefffffff]
> [    0.107523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
> [    0.107526] pci 0000:00:01.0:   IO window: disabled
> [    0.107531] pci 0000:00:01.0:   MEM window: 0xc1000000-0xc1ffffff
> [    0.107535] pci 0000:00:01.0:   PREFETCH window:
> 0xe0000000-0xefffffff
> [    0.107547] pci 0000:02:0b.0: CardBus bridge, secondary bus 0000:03
> [    0.107550] pci 0000:02:0b.0:   IO window: 0x003400-0x0034ff
> [    0.107556] pci 0000:02:0b.0:   IO window: 0x003800-0x0038ff
> [    0.107561] pci 0000:02:0b.0:   PREFETCH window:
> 0x20000000-0x23ffffff
> [    0.107567] pci 0000:02:0b.0:   MEM window: 0x28000000-0x2bffffff
> [    0.107573] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
> [    0.107577] pci 0000:00:1e.0:   IO window: 0x3000-0x3fff
> [    0.107583] pci 0000:00:1e.0:   MEM window: 0xc2000000-0xc20fffff
> [    0.107589] pci 0000:00:1e.0:   PREFETCH window:
> 0x20000000-0x23ffffff
> [    0.107607] pci 0000:00:1e.0: setting latency timer to 64
> [    0.107618] pci 0000:02:0b.0: enabling device (0000 -> 0003)
> [    0.107834] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
> [    0.107837] PCI: setting IRQ 3 as level-triggered
> [    0.107843] pci 0000:02:0b.0: PCI INT A -> Link[LNKA] -> GSI 3
> (level, low) -> IRQ 3
> [    0.107851] pci 0000:02:0b.0: setting latency timer to 64
> [    0.107856] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
> [    0.107860] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
> [    0.107864] pci_bus 0000:01: resource 1 mem: [0xc1000000-0xc1ffffff]
> [    0.107867] pci_bus 0000:01: resource 2 pref mem
> [0xe0000000-0xefffffff]
> [    0.107871] pci_bus 0000:02: resource 0 io:  [0x3000-0x3fff]
> [    0.107875] pci_bus 0000:02: resource 1 mem: [0xc2000000-0xc20fffff]
> [    0.107878] pci_bus 0000:02: resource 2 pref mem
> [0x20000000-0x23ffffff]
> [    0.107882] pci_bus 0000:02: resource 3 io:  [0x00-0xffff]
> [    0.107885] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
> [    0.107889] pci_bus 0000:03: resource 0 io:  [0x3400-0x34ff]
> [    0.107892] pci_bus 0000:03: resource 1 io:  [0x3800-0x38ff]
> [    0.107896] pci_bus 0000:03: resource 2 pref mem
> [0x20000000-0x23ffffff]
> [    0.107899] pci_bus 0000:03: resource 3 mem: [0x28000000-0x2bffffff]
> [    0.107951] NET: Registered protocol family 2
> [    0.108081] IP route cache hash table entries: 4096 (order: 2, 16384
> bytes)
> [    0.108485] TCP established hash table entries: 16384 (order: 5,
> 131072 bytes)
> [    0.108616] TCP bind hash table entries: 16384 (order: 5, 131072
> bytes)
> [    0.108742] TCP: Hash tables configured (established 16384 bind
> 16384)
> [    0.108745] TCP reno registered
> [    0.108835] NET: Registered protocol family 1
> [    0.108919] pci 0000:01:00.0: Boot video device
> [    0.108932] pci 0000:02:08.0: Firmware left e100 interrupts enabled;
> disabling
> [    0.109036] Simple Boot Flag at 0x36 set to 0x1
> [    0.109131] cpufreq-nforce2: No nForce2 chipset.
> [    0.109159] Scanning for low memory corruption every 60 seconds
> [    0.109317] audit: initializing netlink socket (disabled)
> [    0.109335] type=2000 audit(1281021747.106:1): initialized
> [    0.122770] Trying to unpack rootfs image as initramfs...
> [    0.138713] HugeTLB registered 4 MB page size, pre-allocated 0 pages
> [    0.140991] VFS: Disk quotas dquot_6.5.2
> [    0.141084] Dquot-cache hash table entries: 1024 (order 0, 4096
> bytes)
> [    0.146422] fuse init (API version 7.13)
> [    0.146583] msgmni has been set to 968
> [    0.146912] alg: No test for stdrng (krng)
> [    0.147004] Block layer SCSI generic (bsg) driver version 0.4 loaded
> (major 253)
> [    0.147009] io scheduler noop registered
> [    0.147011] io scheduler anticipatory registered
> [    0.147014] io scheduler deadline registered
> [    0.147079] io scheduler cfq registered (default)
> [    0.147236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [    0.147266] pciehp: PCI Express Hot Plug Controller Driver version:
> 0.4
> [    0.147468] ACPI: AC Adapter [ADP1] (on-line)
> [    0.147557] input: Lid Switch
> as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
> [    0.147606] ACPI: Lid Switch [LID]
> [    0.147661] input: Power Button
> as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
> [    0.147667] ACPI: Power Button [PWRB]
> [    0.147728] input: Power Button
> as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
> [    0.147732] ACPI: Power Button [PWRF]
> [    0.148654] fan PNP0C0B:00: registered as cooling_device0
> [    0.148661] ACPI: Fan [FAN] (off)
> [    0.148839] Marking TSC unstable due to TSC halts in idle
> [    0.148876] processor LNXCPU:00: registered as cooling_device1
> [    0.156226] thermal LNXTHERM:01: registered as thermal_zone0
> [    0.156237] ACPI: Thermal Zone [THRM] (40 C)
> [    0.156338] Switching to clocksource acpi_pm
> [    0.157109] ACPI Warning for \_SB_.BAT1._BIF: Return Package type
> mismatch at index 12 - found Integer, expected String/Buffer
> (20090903/nspredef-1012)
> [    0.157516] ACPI: Battery Slot [BAT1] (battery present)
> [    0.157530] isapnp: Scanning for PnP cards...
> [    0.164805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [    0.165478] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
> [    0.165482] PCI: setting IRQ 4 as level-triggered
> [    0.165489] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4
> (level, low) -> IRQ 4
> [    0.165498] serial 0000:00:1f.6: PCI INT B disabled
> [    0.166759] brd: module loaded
> [    0.167391] loop: module loaded
> [    0.167498] input: Macintosh mouse button emulation
> as /devices/virtual/input/input3
> [    0.167632] ata_piix 0000:00:1f.1: version 2.13
> [    0.167643] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
> [    0.167871] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> [    0.167875] PCI: setting IRQ 11 as level-triggered
> [    0.167880] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11
> (level, low) -> IRQ 11
> [    0.167936] ata_piix 0000:00:1f.1: setting latency timer to 64
> [    0.172243] scsi0 : ata_piix
> [    0.215863] scsi1 : ata_piix
> [    0.217126] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840
> irq 14
> [    0.217130] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1848
> irq 15
> [    0.217766] Fixed MDIO Bus: probed
> [    0.217815] PPP generic driver version 2.4.2
> [    0.217910] tun: Universal TUN/TAP device driver, 1.6
> [    0.217913] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
> [    0.218037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI)
> Driver
> [    0.218292] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7
> [    0.218296] PCI: setting IRQ 7 as level-triggered
> [    0.218302] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 7
> (level, low) -> IRQ 7
> [    0.218327] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [    0.218331] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [    0.218374] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
> bus number 1
> [    0.218413] ehci_hcd 0000:00:1d.7: debug port 1
> [    0.222307] ehci_hcd 0000:00:1d.7: cache line size of 32 is not
> supported
> [    0.228276] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xc0000000
> [    0.248214] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [    0.248407] usb usb1: configuration #1 chosen from 1 choice
> [    0.248450] hub 1-0:1.0: USB hub found
> [    0.248466] hub 1-0:1.0: 4 ports detected
> [    0.248556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [    0.248580] uhci_hcd: USB Universal Host Controller Interface driver
> [    0.248662] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 3
> (level, low) -> IRQ 3
> [    0.248675] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [    0.248680] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [    0.248731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
> bus number 2
> [    0.248763] uhci_hcd 0000:00:1d.0: irq 3, io base 0x00001800
> [    0.248891] usb usb2: configuration #1 chosen from 1 choice
> [    0.248929] hub 2-0:1.0: USB hub found
> [    0.248939] hub 2-0:1.0: 2 ports detected
> [    0.249280] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
> [    0.249285] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11
> (level, low) -> IRQ 11
> [    0.249293] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [    0.249297] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [    0.249348] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
> bus number 3
> [    0.249374] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
> [    0.249494] usb usb3: configuration #1 chosen from 1 choice
> [    0.249531] hub 3-0:1.0: USB hub found
> [    0.249541] hub 3-0:1.0: 2 ports detected
> [    0.249658] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at
> 0x60,0x64 irq 1,12
> [    0.256819] serio: i8042 KBD port at 0x60,0x64 irq 1
> [    0.256837] serio: i8042 AUX port at 0x60,0x64 irq 12
> [    0.257049] mice: PS/2 mouse device common for all mice
> [    0.257237] rtc_cmos 00:07: RTC can wake from S4
> [    0.257292] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> [    0.257312] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [    0.257498] device-mapper: uevent: version 1.0.3
> [    0.257666] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01)
> initialised: dm-devel@xxxxxxxxxx
> [    0.261311] device-mapper: multipath: version 1.1.0 loaded
> [    0.261316] device-mapper: multipath round-robin: version 1.0.0
> loaded
> [    0.261546] EISA: Probing bus 0 at eisa.0
> [    0.261554] Cannot allocate resource for EISA slot 1
> [    0.261558] Cannot allocate resource for EISA slot 2
> [    0.261561] Cannot allocate resource for EISA slot 3
> [    0.261577] EISA: Detected 0 cards.
> [    0.263806] cpuidle: using governor ladder
> [    0.263882] cpuidle: using governor menu
> [    0.264582] TCP cubic registered
> [    0.264827] NET: Registered protocol family 10
> [    0.265494] lo: Disabled Privacy Extensions
> [    0.265951] NET: Registered protocol family 17
> [    0.266206] Using IPI No-Shortcut mode
> [    0.266332] PM: Resume from disk failed.
> [    0.266354] registered taskstats version 1
> [    0.266637]   Magic number: 6:799:385
> [    0.266645] usb usb3: hash matches
> [    0.266703] thermal cooling_device0: hash matches
> [    0.266776] rtc_cmos 00:07: setting system clock to 2010-08-05
> 15:22:27 UTC (1281021747)
> [    0.266781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
> [    0.266783] EDD information not available.
> [    0.274223] input: AT Translated Set 2 keyboard
> as /devices/platform/i8042/serio0/input/input4
> [    0.421057] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD0A, max UDMA/100
> [    0.421063] ata1.00: 117210240 sectors, multi 16: LBA48
> [    0.436925] ata1.00: configured for UDMA/100
> [    0.444486] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6012, 1334, max
> UDMA/33
> [    0.500042] ata2.00: configured for UDMA/33
> [    0.847888] isapnp: No Plug & Play device found
> [    0.848123] scsi 0:0:0:0: Direct-Access     ATA      IC25N060ATMR04-0
> MO3O PQ: 0 ANSI: 5
> [    0.848357] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [    0.848577] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks:
> (60.0 GB/55.8 GiB)
> [    0.848635] sd 0:0:0:0: [sda] Write Protect is off
> [    0.848639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [    0.848669] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> [    0.848852]  sda: sda1 sda2 <
> [    0.877698] scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-R6012
> 1334 PQ: 0 ANSI: 5
> [    0.886515] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda
> tray
> [    0.886522] Uniform CD-ROM driver Revision: 3.20
> [    0.886716] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [    0.886810] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [    0.896256]  sda5 >
> [    0.896715] sd 0:0:0:0: [sda] Attached SCSI disk
> [    0.944847] Freeing initrd memory: 12207k freed
> [    0.962827] Freeing unused kernel memory: 660k freed
> [    0.963811] Write protecting the kernel text: 4680k
> [    0.963862] Write protecting the kernel read-only data: 1840k
> [    0.984439] udev: starting version 151
> [    1.260883] vga16fb: initializing
> [    1.260889] vga16fb: mapped to 0xc00a0000
> [    1.261021] fb0: VGA16 VGA frame buffer device
> [    1.261063] Linux agpgart interface v0.103
> [    1.284333] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
> [    1.303672] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC
> function
> [    1.304735] acpi device:01: registered as cooling_device2
> [    1.305041] input: Video Bus
> as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5
> [    1.305153] ACPI: Video Device [VGA] (multi-head: yes  rom: yes
> post: no)
> [    1.312427] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
> [    1.312431] e100: Copyright(c) 1999-2006 Intel Corporation
> [    1.312718] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
> [    1.312724] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11
> (level, low) -> IRQ 11
> [    1.335825] e100 0000:02:08.0: PME# disabled
> [    1.481000] agpgart-intel 0000:00:00.0: AGP aperture is 256M @
> 0xd0000000
> [    1.482170] e100: eth0: e100_probe: addr 0xc2004000, irq 11, MAC addr
> 00:08:0d:f8:25:c6
> [    1.482494] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3
> [    1.482500] ohci1394 0000:02:07.0: PCI INT A -> Link[LNKF] -> GSI 3
> (level, low) -> IRQ 3
> [    1.543768] Console: switching to colour frame buffer device 80x30
> [    1.552781] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3]
> MMIO=[c2006000-c20067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> [    1.932031] kjournald starting.  Commit interval 5 seconds
> [    1.932047] EXT3-fs: mounted filesystem with ordered data mode.
> [    2.824175] ieee1394: Host added: ID:BUS[0-00:1023]
> GUID[0000390000265a7c]
> [   34.337696] Adding 1485972k swap on /dev/sda5.  Priority:-1 extents:1
> across:1485972k
> [   34.380303] udev: starting version 151
> [   34.696156] toshiba_acpi: Toshiba Laptop ACPI Extras version
> 0.19-dev-acpikeys
> [   34.696161] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
> [   34.697095] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
> [   34.697099] toshiba_acpi: ktoshkeyd will check 2 times per second
> [   34.705969] shpchp: Standard Hot Plug PCI Controller Driver version:
> 0.4
> [   34.766750] lp: driver loaded but no devices found
> [   34.768125] intel_rng: FWH not detected
> [   34.797386] toshiba_acpi: Dropped 0 keys from the queue on startup
> [   34.927390] EXT3 FS on sda1, internal journal
> [   34.928468] parport_pc 00:09: activated
> [   34.928475] parport_pc 00:09: reported by Plug and Play ACPI
> [   34.928657] parport0: PC-style at 0x378 (0x778), irq 5, dma 3
> [PCSPP,TRISTATE,COMPAT,ECP,DMA]
> [   34.979206] lib80211: common routines for IEEE802.11 drivers
> [   34.979212] lib80211_crypt: registered algorithm 'NULL'
> [   34.999912] ppdev: user-space parallel port driver
> [   35.036446] lp0: using parport0 (interrupt-driven).
> [   35.098136] nvidia: module license 'NVIDIA' taints kernel.
> [   35.098141] Disabling lock debugging due to kernel taint
> [   35.674679] type=1505 audit(1281021782.905:2):
> operation="profile_load" pid=561 name="/sbin/dhclient3"
> [   35.675443] type=1505 audit(1281021782.905:3):
> operation="profile_load" pid=561
> name="/usr/lib/NetworkManager/nm-dhcp-client.action"
> [   35.675927] type=1505 audit(1281021782.905:4):
> operation="profile_load" pid=561
> name="/usr/lib/connman/scripts/dhclient-script"
> [   36.055141] ieee80211: 802.11 data/management/control stack,
> git-1.1.13
> [   36.055147] ieee80211: Copyright (C) 2004-2005 Intel Corporation
> <jketreno@xxxxxxxxxxxxxxx>
> [   36.087458] yenta_cardbus 0000:02:0b.0: CardBus bridge found
> [1179:0001]
> [   36.088780] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver,
> git-1.2.2
> [   36.088785] ipw2100: Copyright(c) 2003-2006 Intel Corporation
> [   36.198346] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps:
> 0x804713/0x0
> [   36.198356] synaptics: Toshiba Satellite M30 detected, limiting rate
> to 40pps.
> [   36.212394] yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0400, PCI irq
> 3
> [   36.212400] yenta_cardbus 0000:02:0b.0: Socket status: 30000007
> [   36.212406] pci_bus 0000:02: Raising subordinate bus# of parent bus
> (#02) from #03 to #06
> [   36.212418] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge I/O
> window: 0x3000 - 0x3fff
> [   36.212423] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0x3000-0x3fff: clean.
> [   36.212687] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge
> Memory window: 0xc2000000 - 0xc20fffff
> [   36.212691] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge
> Memory window: 0x20000000 - 0x23ffffff
> [   36.220480] ipw2100 0000:02:0a.0: PCI INT A -> Link[LNKD] -> GSI 11
> (level, low) -> IRQ 11
> [   36.221155] ipw2100: Detected Intel PRO/Wireless 2100 Network
> Connection
> [   36.221178] ipw2100 0000:02:0a.0: firmware: requesting ipw2100-1.3.fw
> [   36.285207] type=1505 audit(1281021783.517:5):
> operation="profile_load" pid=680
> name="/usr/share/gdm/guest-session/Xsession"
> [   36.287227] type=1505 audit(1281021783.517:6):
> operation="profile_replace" pid=681 name="/sbin/dhclient3"
> [   36.288078] type=1505 audit(1281021783.521:7):
> operation="profile_replace" pid=681
> name="/usr/lib/NetworkManager/nm-dhcp-client.action"
> [   36.290416] type=1505 audit(1281021783.521:8):
> operation="profile_replace" pid=681
> name="/usr/lib/connman/scripts/dhclient-script"
> [   36.290619] input: SynPS/2 Synaptics TouchPad
> as /devices/platform/i8042/serio1/input/input6
> [   36.310692] type=1505 audit(1281021783.541:9):
> operation="profile_load" pid=685 name="/usr/bin/evince"
> [   36.444228] type=1505 audit(1281021783.677:10):
> operation="profile_load" pid=685 name="/usr/bin/evince-previewer"
> [   36.461339] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 4
> (level, low) -> IRQ 4
> [   36.461387] Intel ICH 0000:00:1f.5: setting latency timer to 64
> [   36.463663] type=1505 audit(1281021783.693:11):
> operation="profile_load" pid=685 name="/usr/bin/evince-thumbnailer"
> [   36.480370] eth1: Radio is disabled by RF switch.
> [   36.498675] nvidia 0000:01:00.0: power state changed by ACPI to D0
> [   36.498737] nvidia 0000:01:00.0: power state changed by ACPI to D0
> [   36.498961] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
> [   36.498965] PCI: setting IRQ 10 as level-triggered
> [   36.498971] nvidia 0000:01:00.0: PCI INT A -> Link[LNKG] -> GSI 10
> (level, low) -> IRQ 10
> [   36.500553] NVRM: loading NVIDIA UNIX x86 Kernel Module  173.14.22
> Sun Nov  8 20:26:31 PST 2009
> [   36.646048] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0x100-0x3af: clean.
> [   36.647005] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0x3e0-0x4ff: clean.
> [   36.647412] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0x820-0x8ff: clean.
> [   36.647771] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0xc00-0xcf7: clean.
> [   36.650185] pcmcia_socket pcmcia_socket0: cs: IO port probe
> 0xa00-0xaff: clean.
> [   36.780994] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [   36.784166] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
> [   36.805641] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [   36.811164] apm: BIOS not found.
> [   37.462380] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
> [   37.462397] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x
> mode
> [   37.462433] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode
> [   37.756088] AC'97 1 does not respond - RESET
> [   37.756293] AC'97 1 access is not valid [0xffffffff], removing mixer.
> [   37.756300] Unable to initialize codec #1
> [   37.814964] intel8x0_measure_ac97_clock: measured 58356 usecs (2811
> samples)
> [   37.814968] intel8x0: clocking to 48000
> [   47.408036] eth0: no IPv6 routers present
> [   66.936048] usb 1-2: new high speed USB device using ehci_hcd and
> address 2
> [   67.004337] hub 1-0:1.0: unable to enumerate USB device on port 2
> [   67.272043] usb 2-2: new full speed USB device using uhci_hcd and
> address 2
> [   67.418013] usb 2-2: not running at top speed; connect to a high
> speed hub
> [   67.452175] usb 2-2: configuration #1 chosen from 1 choice
> [   67.545413] Initializing USB Mass Storage driver...
> [   67.545554] scsi2 : SCSI emulation for USB Mass Storage devices
> [   67.545737] usbcore: registered new interface driver usb-storage
> [   67.545741] USB Mass Storage support registered.
> [   67.553395] usb-storage: device found at 2
> [   67.553399] usb-storage: waiting for device to settle before scanning
> [   72.556052] usb-storage: device scan complete
> [   72.559215] scsi 2:0:0:0: Direct-Access     Kingston DataTraveler 2.0
> 1.00 PQ: 0 ANSI: 2
> [   72.559733] sd 2:0:0:0: Attached scsi generic sg2 type 0
> [   72.587169] sd 2:0:0:0: [sdb] 3905407 512-byte logical blocks: (1.99
> GB/1.86 GiB)
> [   72.590257] sd 2:0:0:0: [sdb] Write Protect is off
> [   72.590263] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08
> [   72.590267] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [   72.606155] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [   72.606163]  sdb: sdb1
> [   72.767132] sd 2:0:0:0: [sdb] Assuming drive cache: write through
> [   72.767141] sd 2:0:0:0: [sdb] Attached SCSI removable disk
> [  136.448096] usb 2-2: USB disconnect, address 2
> [  324.248082] usb 2-2: new full speed USB device using uhci_hcd and
> address 3
> [  324.409375] usb 2-2: configuration #1 chosen from 1 choice
>
> Module                  Size  Used by
> nls_iso8859_1           3249  0
> nls_cp437               4919  0
> vfat                    8933  0
> fat                    47767  1 vfat
> usb_storage            39425  0
> binfmt_misc             6587  1
> snd_intel8x0           25588  2
> snd_ac97_codec        100646  1 snd_intel8x0
> ac97_bus                1002  1 snd_ac97_codec
> snd_pcm_oss            35308  0
> joydev                  8708  0
> snd_mixer_oss          13746  1 snd_pcm_oss
> snd_pcm                70662  3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> snd_seq_dummy           1338  0
> pcmcia                 33024  0
> snd_seq_oss            26726  0
> snd_seq_midi            4557  0
> snd_rawmidi            19056  1 snd_seq_midi
> snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
> snd_seq                47263  6
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_timer              19098  2 snd_pcm,snd_seq
> snd_seq_device          5700  5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> ipw2100                66395  0
> yenta_socket           20408  1
> snd                    54148  14
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> rsrc_nonstatic         10015  1 yenta_socket
> libipw                 39896  1 ipw2100
> nvidia               7087672  24
> ppdev                   5259  0
> lib80211                5046  1 libipw
> pcmcia_core            32964  3 pcmcia,yenta_socket,rsrc_nonstatic
> parport_pc             25962  1
> psmouse                63245  0
> serio_raw               3978  0
> soundcore               6620  1 snd
> snd_page_alloc          7076  2 snd_intel8x0,snd_pcm
> shpchp                 28820  0
> toshiba_acpi            8662  0
> lp                      7028  0
> parport                32635  3 ppdev,parport_pc,lp
> fbcon                  35102  71
> ohci1394               26950  0
> e100                   28211  0
> video                  17375  0
> tileblit                2031  1 fbcon
> font                    7557  1 fbcon
> bitblit                 4707  1 fbcon
> softcursor              1189  1 bitblit
> intel_agp              24119  1
> mii                     4381  1 e100
> output                  1871  1 video
> ieee1394               81181  1 ohci1394
> vga16fb                11385  1
> vgastate                8961  1 vga16fb
> agpgart                31724  2 nvidia,intel_agp
>
>



[Index of Archives]     [Linux Media Development]     [Asterisk]     [DCCP]     [Netdev]     [X.org]     [Xfree86]     [Fedora Women]     [Linux USB]

  Powered by Linux