-------------------------- System information ---------------------------- CPU=i686, Ubuntu , ALSA_version=1.0.21 Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 scanModem update of: 2010_05_29 Distrib_ID=Ubuntu DistribCodeName=lucid AptRepositoryStem=http://kambing.ui.ac.id/ubuntu/ The dkms driver upgrade utilities are installed, There are no blacklisted modem drivers in /etc/modprobe* files Potentially useful modem drivers now loaded are: Attached USB devices are: ID 0eab:511f If a cellphone is not detected, see http://ubuntuforums.org/archive/index.php/t-878554.html A sample report is: http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html If a USB modem or cellphone is attached and was not detected, please provide available information in your request to discuss@xxxxxxxxxxxxx Candidate PCI devices with modem chips are: 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) High Definition Audio cards can host modem chips. For candidate card in slot 00:1f.6, firmware information and bootup diagnostics are: PCI slot PCI ID SubsystemID Name ---------- --------- --------- -------------- 00:1f.6 8086:24c6 1179:0001 Modem: Intel Corporation 82801DB/DBL/DBM Modem interrupt assignment and sharing: 4: 99 XT-PIC-XT Intel 82801DB-ICH4 --- Bootup diagnostics for card in PCI slot 00:1f.6 ---- [ 0.065139] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.065146] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.065184] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.065189] pci 0000:00:1f.6: PME# disabled [ 0.165489] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 0.165498] serial 0000:00:1f.6: PCI INT B disabled // dmsg.txt CPU0 0: 45563 XT-PIC-XT timer 1: 240 XT-PIC-XT i8042 2: 0 XT-PIC-XT cascade 3: 1068 XT-PIC-XT uhci_hcd:usb2, ohci1394, yenta 4: 99 XT-PIC-XT Intel 82801DB-ICH4 5: 1 XT-PIC-XT parport0 7: 106 XT-PIC-XT ehci_hcd:usb1 8: 0 XT-PIC-XT rtc0 9: 82 XT-PIC-XT acpi 10: 21441 XT-PIC-XT nvidia 11: 257 XT-PIC-XT uhci_hcd:usb3, eth1, eth0 12: 41294 XT-PIC-XT i8042 14: 9176 XT-PIC-XT ata_piix 15: 5352 XT-PIC-XT ata_piix NMI: 0 Non-maskable interrupts LOC: 0 Local timer interrupts SPU: 0 Spurious interrupts PMI: 0 Performance monitoring interrupts PND: 0 Performance pending work RES: 0 Rescheduling interrupts CAL: 0 Function call interrupts TLB: 0 TLB shootdowns TRM: 0 Thermal event interrupts THR: 0 Threshold APIC interrupts MCE: 0 Machine check exceptions MCP: 2 Machine check polls ERR: 0 MIS: 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) [ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff6a000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff6a000 - 000000001ff6b000 (reserved) [ 0.000000] BIOS-e820: 000000001ff6b000 - 000000001ff70000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff70000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x1ff60 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-D3FFF write-back [ 0.000000] D4000-D7FFF write-protect [ 0.000000] D8000-DFFFF uncachable [ 0.000000] E0000-E3FFF write-back [ 0.000000] E4000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FE0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009f800 (usable) [ 0.000000] modified: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000d0000 - 00000000000d4000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000001ff60000 (usable) [ 0.000000] modified: 000000001ff60000 - 000000001ff6a000 (ACPI data) [ 0.000000] modified: 000000001ff6a000 - 000000001ff6b000 (reserved) [ 0.000000] modified: 000000001ff6b000 - 000000001ff70000 (ACPI NVS) [ 0.000000] modified: 000000001ff70000 - 0000000020000000 (reserved) [ 0.000000] modified: 00000000ffb80000 - 00000000ffc00000 (reserved) [ 0.000000] modified: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-000000001ff60000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 001fc00000 page 2M [ 0.000000] 001fc00000 - 001ff60000 page 4k [ 0.000000] kernel direct mapping tables up to 1ff60000 @ 7000-c000 [ 0.000000] RAMDISK: 1f364000 - 1ff4fc85 [ 0.000000] ACPI: RSDP 000f7a10 00014 (v00 TOSHIB) [ 0.000000] ACPI: RSDT 1ff63fd8 00034 (v01 TOSHIB 750 00970814 MASM 06110000) [ 0.000000] ACPI: FACP 1ff69d03 00084 (v02 TOSHIB 750 20030101 MASM 61100000) [ 0.000000] ACPI: DSDT 1ff6400c 05CF7 (v01 TOSHIB A0007 20030806 MSFT 0100000E) [ 0.000000] ACPI: FACS 1ff6bfc0 00040 [ 0.000000] ACPI: SSDT 1ff69d87 0021D (v01 TOSHIB A0007 00970814 MSFT 0100000E) [ 0.000000] ACPI: DBGP 1ff69fa4 00034 (v01 TOSHIB 750 00970814 MASM 61100000) [ 0.000000] ACPI: BOOT 1ff69fd8 00028 (v01 TOSHIB 750 00970814 MASM 06110000) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 1ff60000 [ 0.000000] low ram: 0 - 1ff60000 [ 0.000000] node 0 low ram: 00000000 - 1ff60000 [ 0.000000] node 0 bootmap 00008000 - 0000bfec [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 001ff60000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008dbeb8] TEXT DATA BSS ==> [0000100000 - 00008dbeb8] [ 0.000000] #4 [001f364000 - 001ff4fc85] RAMDISK ==> [001f364000 - 001ff4fc85] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [00008dc000 - 00008df1cc] BRK ==> [00008dc000 - 00008df1cc] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000c000] BOOTMAP ==> [0000008000 - 000000c000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0001ff60 [ 0.000000] HighMem 0x0001ff60 -> 0x0001ff60 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0001ff60 [ 0.000000] On node 0 totalpages: 130811 [ 0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3963 pages, LIFO batch:0 [ 0.000000] Normal zone: 991 pages used for memmap [ 0.000000] Normal zone: 125825 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] APIC: disable apic facility [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dfb80000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u4194304 [ 0.000000] pcpu-alloc: s36056 r0 d21288 u4194304 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129788 [ 0.000000] Kernel command line: root=UUID=92632947-46db-4876-a96e-bd0ed1f661e2 ro quiet splash [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 2618240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 495564k/523648k available (4679k kernel code, 27428k reserved, 2116k data, 660k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xe0760000 - 0xff7fe000 ( 496 MB) [ 0.000000] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) [ 0.000000] .init : 0xc07a3000 - 0xc0848000 ( 660 kB) [ 0.000000] .data : 0xc0591d23 - 0xc07a2e88 (2116 kB) [ 0.000000] .text : 0xc0100000 - 0xc0591d23 (4679 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1596.081 MHz processor. [ 0.008005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.16 BogoMIPS (lpj=6384324) [ 0.008027] Security Framework initialized [ 0.008060] AppArmor: AppArmor initialized [ 0.008069] Mount-cache hash table entries: 512 [ 0.008222] Initializing cgroup subsys ns [ 0.008228] Initializing cgroup subsys cpuacct [ 0.008233] Initializing cgroup subsys memory [ 0.008245] Initializing cgroup subsys devices [ 0.008248] Initializing cgroup subsys freezer [ 0.008251] Initializing cgroup subsys net_cls [ 0.008279] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008283] CPU: L2 cache: 1024K [ 0.008288] mce: CPU supports 5 MCE banks [ 0.008303] Performance Events: [ 0.008306] no APIC, boot with the "lapic" boot parameter to force-enable it. [ 0.008309] no hardware sampling interrupt available. [ 0.008312] p6 PMU driver. [ 0.008330] ... version: 0 [ 0.008332] ... bit width: 32 [ 0.008335] ... generic registers: 2 [ 0.008337] ... value mask: 00000000ffffffff [ 0.008340] ... max period: 000000007fffffff [ 0.008343] ... fixed-purpose events: 0 [ 0.008345] ... event mask: 0000000000000003 [ 0.008350] Checking 'hlt' instruction... OK. [ 0.025007] SMP alternatives: switching to UP code [ 0.033508] Freeing SMP alternatives: 19k freed [ 0.033519] ACPI: Core revision 20090903 [ 0.045005] ACPI: setting ELCR to 0200 (from 0c98) [ 0.045140] ftrace: converting mcount calls to 0f 1f 44 00 00 [ 0.045145] ftrace: allocating 21780 entries in 43 pages [ 0.048117] Enabling APIC mode: Flat. Using 0 I/O APICs [ 0.048123] weird, boot CPU (#0) not listed by the BIOS. [ 0.048126] SMP motherboard not detected. [ 0.048130] Local APIC not detected. Using dummy APIC emulation. [ 0.048133] SMP disabled [ 0.048361] Brought up 1 CPUs [ 0.048366] Total of 1 processors activated (3192.16 BogoMIPS). [ 0.049537] CPU0 attaching NULL sched-domain. [ 0.049725] devtmpfs: initialized [ 0.050232] regulator: core version 0.5 [ 0.052030] Time: 15:22:27 Date: 08/05/10 [ 0.052091] NET: Registered protocol family 16 [ 0.052235] EISA bus registered [ 0.052245] ACPI: bus type pci registered [ 0.052526] PCI: PCI BIOS revision 2.10 entry at 0xfd981, last bus=4 [ 0.052529] PCI: Using configuration type 1 for base access [ 0.053732] bio: create slab <bio-0> at 0 [ 0.054736] ACPI: EC: Look up EC in DSDT [ 0.056917] ACPI Warning: Package List length (0x10) larger than NumElements count (0x6), truncated [ 0.056923] (20090903/dsobject-515) [ 0.058577] ACPI: Interpreter enabled [ 0.058589] ACPI: (supports S0 S3 S4 S5) [ 0.058614] ACPI: Using PIC for interrupt routing [ 0.060153] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 0.064041] ACPI: Power Resource [PFAN] (off) [ 0.064235] ACPI: No dock devices found. [ 0.064502] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.064550] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.064668] pci 0000:00:1d.0: reg 20 io port: [0x1800-0x181f] [ 0.064722] pci 0000:00:1d.1: reg 20 io port: [0x1820-0x183f] [ 0.064784] pci 0000:00:1d.7: reg 10 32bit mmio: [0xc0000000-0xc00003ff] [ 0.064843] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.064849] pci 0000:00:1d.7: PME# disabled [ 0.064939] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.064944] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.064969] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.064976] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.064984] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.064991] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.064999] pci 0000:00:1f.1: reg 20 io port: [0x1840-0x184f] [ 0.065007] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.065051] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff] [ 0.065058] pci 0000:00:1f.5: reg 14 io port: [0x1880-0x18bf] [ 0.065065] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff] [ 0.065073] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff] [ 0.065103] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.065108] pci 0000:00:1f.5: PME# disabled [ 0.065139] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff] [ 0.065146] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f] [ 0.065184] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.065189] pci 0000:00:1f.6: PME# disabled [ 0.065226] pci 0000:01:00.0: reg 10 32bit mmio: [0xc1000000-0xc1ffffff] [ 0.065232] pci 0000:01:00.0: reg 14 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.065251] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.065304] pci 0000:00:01.0: bridge 32bit mmio: [0xc1000000-0xc1ffffff] [ 0.065308] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.065352] pci 0000:02:07.0: reg 10 32bit mmio: [0xc2006000-0xc20067ff] [ 0.065359] pci 0000:02:07.0: reg 14 32bit mmio: [0xc2000000-0xc2003fff] [ 0.065400] pci 0000:02:07.0: supports D1 D2 [ 0.065403] pci 0000:02:07.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065408] pci 0000:02:07.0: PME# disabled [ 0.065439] pci 0000:02:08.0: reg 10 32bit mmio: [0xc2004000-0xc2004fff] [ 0.065446] pci 0000:02:08.0: reg 14 io port: [0x3000-0x303f] [ 0.065483] pci 0000:02:08.0: supports D1 D2 [ 0.065486] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065491] pci 0000:02:08.0: PME# disabled [ 0.065525] pci 0000:02:0a.0: reg 10 32bit mmio: [0xc2005000-0xc2005fff] [ 0.065603] pci 0000:02:0b.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.065624] pci 0000:02:0b.0: supports D1 D2 [ 0.065627] pci 0000:02:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065632] pci 0000:02:0b.0: PME# disabled [ 0.065668] pci 0000:02:0d.0: reg 10 32bit mmio: [0xc2006800-0xc20069ff] [ 0.065714] pci 0000:02:0d.0: supports D1 D2 [ 0.065717] pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.065722] pci 0000:02:0d.0: PME# disabled [ 0.065750] pci 0000:00:1e.0: transparent bridge [ 0.065755] pci 0000:00:1e.0: bridge io port: [0x3000-0x3fff] [ 0.065760] pci 0000:00:1e.0: bridge 32bit mmio: [0xc2000000-0xc20fffff] [ 0.065790] pci_bus 0000:00: on NUMA node 0 [ 0.065795] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.065836] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.065870] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.067978] ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 7 11) [ 0.068133] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 11) [ 0.068248] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 11) *0, disabled. [ 0.068392] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11) [ 0.068530] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *11) [ 0.068667] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 7 11) [ 0.068803] ACPI: PCI Interrupt Link [LNKG] (IRQs *10) [ 0.068938] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *7 11) [ 0.069080] vgaarb: device added: PCI:0000:01:00.0,decodes=io +mem,owns=io+mem,locks=none [ 0.069086] vgaarb: loaded [ 0.069239] SCSI subsystem initialized [ 0.069303] libata version 3.00 loaded. [ 0.069398] usbcore: registered new interface driver usbfs [ 0.069417] usbcore: registered new interface driver hub [ 0.069447] usbcore: registered new device driver usb [ 0.069606] ACPI: WMI: Mapper loaded [ 0.069609] PCI: Using ACPI for IRQ routing [ 0.069802] NetLabel: Initializing [ 0.069804] NetLabel: domain hash size = 128 [ 0.069807] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.069824] NetLabel: unlabeled traffic allowed by default [ 0.069870] Switching to clocksource tsc [ 0.072001] AppArmor: AppArmor Filesystem Enabled [ 0.072001] pnp: PnP ACPI init [ 0.072001] ACPI: bus type pnp registered [ 0.072630] pnp: PnP ACPI: found 11 devices [ 0.072634] ACPI: ACPI bus type pnp unregistered [ 0.072639] PnPBIOS: Disabled by ACPI PNP [ 0.072653] system 00:00: iomem range 0x0-0x9ffff could not be reserved [ 0.072657] system 00:00: iomem range 0xe0000-0xeffff could not be reserved [ 0.072661] system 00:00: iomem range 0xf0000-0xfffff could not be reserved [ 0.072665] system 00:00: iomem range 0x100000-0x1ff5ffff could not be reserved [ 0.072669] system 00:00: iomem range 0x1ff60000-0x1ff6bfff could not be reserved [ 0.072673] system 00:00: iomem range 0x1ff6c000-0x1ff6ffff could not be reserved [ 0.072677] system 00:00: iomem range 0x1ff70000-0x1ff7ffff has been reserved [ 0.072681] system 00:00: iomem range 0x1ff80000-0x1fffffff has been reserved [ 0.072684] system 00:00: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.072688] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved [ 0.072701] system 00:0a: ioport range 0x1e0-0x1e7 has been reserved [ 0.072705] system 00:0a: ioport range 0x480-0x48f has been reserved [ 0.072708] system 00:0a: ioport range 0x680-0x6ff has been reserved [ 0.072712] system 00:0a: ioport range 0x1000-0x107f has been reserved [ 0.072716] system 00:0a: ioport range 0x10ac-0x10ac has been reserved [ 0.072720] system 00:0a: ioport range 0x1100-0x111f has been reserved [ 0.072724] system 00:0a: ioport range 0x1180-0x11bf has been reserved [ 0.072728] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.072732] system 00:0a: ioport range 0xe000-0xe07f has been reserved [ 0.072736] system 00:0a: ioport range 0xe080-0xe0ff has been reserved [ 0.072739] system 00:0a: ioport range 0xe400-0xe47f has been reserved [ 0.072752] system 00:0a: ioport range 0xe480-0xe4ff has been reserved [ 0.072756] system 00:0a: ioport range 0xe800-0xe87f has been reserved [ 0.072760] system 00:0a: ioport range 0xe880-0xe8ff has been reserved [ 0.072764] system 00:0a: ioport range 0xec00-0xec7f has been reserved [ 0.072768] system 00:0a: ioport range 0xec80-0xecff has been reserved [ 0.107518] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] [ 0.107523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.107526] pci 0000:00:01.0: IO window: disabled [ 0.107531] pci 0000:00:01.0: MEM window: 0xc1000000-0xc1ffffff [ 0.107535] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xefffffff [ 0.107547] pci 0000:02:0b.0: CardBus bridge, secondary bus 0000:03 [ 0.107550] pci 0000:02:0b.0: IO window: 0x003400-0x0034ff [ 0.107556] pci 0000:02:0b.0: IO window: 0x003800-0x0038ff [ 0.107561] pci 0000:02:0b.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.107567] pci 0000:02:0b.0: MEM window: 0x28000000-0x2bffffff [ 0.107573] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.107577] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.107583] pci 0000:00:1e.0: MEM window: 0xc2000000-0xc20fffff [ 0.107589] pci 0000:00:1e.0: PREFETCH window: 0x20000000-0x23ffffff [ 0.107607] pci 0000:00:1e.0: setting latency timer to 64 [ 0.107618] pci 0000:02:0b.0: enabling device (0000 -> 0003) [ 0.107834] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3 [ 0.107837] PCI: setting IRQ 3 as level-triggered [ 0.107843] pci 0000:02:0b.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3 [ 0.107851] pci 0000:02:0b.0: setting latency timer to 64 [ 0.107856] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.107860] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.107864] pci_bus 0000:01: resource 1 mem: [0xc1000000-0xc1ffffff] [ 0.107867] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.107871] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] [ 0.107875] pci_bus 0000:02: resource 1 mem: [0xc2000000-0xc20fffff] [ 0.107878] pci_bus 0000:02: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.107882] pci_bus 0000:02: resource 3 io: [0x00-0xffff] [ 0.107885] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff] [ 0.107889] pci_bus 0000:03: resource 0 io: [0x3400-0x34ff] [ 0.107892] pci_bus 0000:03: resource 1 io: [0x3800-0x38ff] [ 0.107896] pci_bus 0000:03: resource 2 pref mem [0x20000000-0x23ffffff] [ 0.107899] pci_bus 0000:03: resource 3 mem: [0x28000000-0x2bffffff] [ 0.107951] NET: Registered protocol family 2 [ 0.108081] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.108485] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.108616] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 0.108742] TCP: Hash tables configured (established 16384 bind 16384) [ 0.108745] TCP reno registered [ 0.108835] NET: Registered protocol family 1 [ 0.108919] pci 0000:01:00.0: Boot video device [ 0.108932] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 0.109036] Simple Boot Flag at 0x36 set to 0x1 [ 0.109131] cpufreq-nforce2: No nForce2 chipset. [ 0.109159] Scanning for low memory corruption every 60 seconds [ 0.109317] audit: initializing netlink socket (disabled) [ 0.109335] type=2000 audit(1281021747.106:1): initialized [ 0.122770] Trying to unpack rootfs image as initramfs... [ 0.138713] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.140991] VFS: Disk quotas dquot_6.5.2 [ 0.141084] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.146422] fuse init (API version 7.13) [ 0.146583] msgmni has been set to 968 [ 0.146912] alg: No test for stdrng (krng) [ 0.147004] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.147009] io scheduler noop registered [ 0.147011] io scheduler anticipatory registered [ 0.147014] io scheduler deadline registered [ 0.147079] io scheduler cfq registered (default) [ 0.147236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.147266] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.147468] ACPI: AC Adapter [ADP1] (on-line) [ 0.147557] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.147606] ACPI: Lid Switch [LID] [ 0.147661] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.147667] ACPI: Power Button [PWRB] [ 0.147728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.147732] ACPI: Power Button [PWRF] [ 0.148654] fan PNP0C0B:00: registered as cooling_device0 [ 0.148661] ACPI: Fan [FAN] (off) [ 0.148839] Marking TSC unstable due to TSC halts in idle [ 0.148876] processor LNXCPU:00: registered as cooling_device1 [ 0.156226] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.156237] ACPI: Thermal Zone [THRM] (40 C) [ 0.156338] Switching to clocksource acpi_pm [ 0.157109] ACPI Warning for \_SB_.BAT1._BIF: Return Package type mismatch at index 12 - found Integer, expected String/Buffer (20090903/nspredef-1012) [ 0.157516] ACPI: Battery Slot [BAT1] (battery present) [ 0.157530] isapnp: Scanning for PnP cards... [ 0.164805] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.165478] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4 [ 0.165482] PCI: setting IRQ 4 as level-triggered [ 0.165489] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 0.165498] serial 0000:00:1f.6: PCI INT B disabled [ 0.166759] brd: module loaded [ 0.167391] loop: module loaded [ 0.167498] input: Macintosh mouse button emulation as /devices/virtual/input/input3 [ 0.167632] ata_piix 0000:00:1f.1: version 2.13 [ 0.167643] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.167871] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 0.167875] PCI: setting IRQ 11 as level-triggered [ 0.167880] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 0.167936] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.172243] scsi0 : ata_piix [ 0.215863] scsi1 : ata_piix [ 0.217126] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1840 irq 14 [ 0.217130] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1848 irq 15 [ 0.217766] Fixed MDIO Bus: probed [ 0.217815] PPP generic driver version 2.4.2 [ 0.217910] tun: Universal TUN/TAP device driver, 1.6 [ 0.217913] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.218037] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.218292] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 7 [ 0.218296] PCI: setting IRQ 7 as level-triggered [ 0.218302] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 7 (level, low) -> IRQ 7 [ 0.218327] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.218331] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.218374] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.218413] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.222307] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.228276] ehci_hcd 0000:00:1d.7: irq 7, io mem 0xc0000000 [ 0.248214] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.248407] usb usb1: configuration #1 chosen from 1 choice [ 0.248450] hub 1-0:1.0: USB hub found [ 0.248466] hub 1-0:1.0: 4 ports detected [ 0.248556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.248580] uhci_hcd: USB Universal Host Controller Interface driver [ 0.248662] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 3 (level, low) -> IRQ 3 [ 0.248675] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.248680] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.248731] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.248763] uhci_hcd 0000:00:1d.0: irq 3, io base 0x00001800 [ 0.248891] usb usb2: configuration #1 chosen from 1 choice [ 0.248929] hub 2-0:1.0: USB hub found [ 0.248939] hub 2-0:1.0: 2 ports detected [ 0.249280] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 0.249285] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 0.249293] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.249297] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.249348] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.249374] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 0.249494] usb usb3: configuration #1 chosen from 1 choice [ 0.249531] hub 3-0:1.0: USB hub found [ 0.249541] hub 3-0:1.0: 2 ports detected [ 0.249658] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.256819] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.256837] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.257049] mice: PS/2 mouse device common for all mice [ 0.257237] rtc_cmos 00:07: RTC can wake from S4 [ 0.257292] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 [ 0.257312] rtc0: alarms up to one month, y3k, 114 bytes nvram [ 0.257498] device-mapper: uevent: version 1.0.3 [ 0.257666] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 0.261311] device-mapper: multipath: version 1.1.0 loaded [ 0.261316] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.261546] EISA: Probing bus 0 at eisa.0 [ 0.261554] Cannot allocate resource for EISA slot 1 [ 0.261558] Cannot allocate resource for EISA slot 2 [ 0.261561] Cannot allocate resource for EISA slot 3 [ 0.261577] EISA: Detected 0 cards. [ 0.263806] cpuidle: using governor ladder [ 0.263882] cpuidle: using governor menu [ 0.264582] TCP cubic registered [ 0.264827] NET: Registered protocol family 10 [ 0.265494] lo: Disabled Privacy Extensions [ 0.265951] NET: Registered protocol family 17 [ 0.266206] Using IPI No-Shortcut mode [ 0.266332] PM: Resume from disk failed. [ 0.266354] registered taskstats version 1 [ 0.266637] Magic number: 6:799:385 [ 0.266645] usb usb3: hash matches [ 0.266703] thermal cooling_device0: hash matches [ 0.266776] rtc_cmos 00:07: setting system clock to 2010-08-05 15:22:27 UTC (1281021747) [ 0.266781] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.266783] EDD information not available. [ 0.274223] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 0.421057] ata1.00: ATA-6: IC25N060ATMR04-0, MO3OAD0A, max UDMA/100 [ 0.421063] ata1.00: 117210240 sectors, multi 16: LBA48 [ 0.436925] ata1.00: configured for UDMA/100 [ 0.444486] ata2.00: ATAPI: TOSHIBA DVD-ROM SD-R6012, 1334, max UDMA/33 [ 0.500042] ata2.00: configured for UDMA/33 [ 0.847888] isapnp: No Plug & Play device found [ 0.848123] scsi 0:0:0:0: Direct-Access ATA IC25N060ATMR04-0 MO3O PQ: 0 ANSI: 5 [ 0.848357] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.848577] sd 0:0:0:0: [sda] 117210240 512-byte logical blocks: (60.0 GB/55.8 GiB) [ 0.848635] sd 0:0:0:0: [sda] Write Protect is off [ 0.848639] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.848669] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.848852] sda: sda1 sda2 < [ 0.877698] scsi 1:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R6012 1334 PQ: 0 ANSI: 5 [ 0.886515] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 0.886522] Uniform CD-ROM driver Revision: 3.20 [ 0.886716] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 0.886810] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 0.896256] sda5 > [ 0.896715] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.944847] Freeing initrd memory: 12207k freed [ 0.962827] Freeing unused kernel memory: 660k freed [ 0.963811] Write protecting the kernel text: 4680k [ 0.963862] Write protecting the kernel read-only data: 1840k [ 0.984439] udev: starting version 151 [ 1.260883] vga16fb: initializing [ 1.260889] vga16fb: mapped to 0xc00a0000 [ 1.261021] fb0: VGA16 VGA frame buffer device [ 1.261063] Linux agpgart interface v0.103 [ 1.284333] agpgart-intel 0000:00:00.0: Intel 855PM Chipset [ 1.303672] [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [ 1.304735] acpi device:01: registered as cooling_device2 [ 1.305041] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input5 [ 1.305153] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no) [ 1.312427] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.312431] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.312718] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 [ 1.312724] e100 0000:02:08.0: PCI INT A -> Link[LNKE] -> GSI 11 (level, low) -> IRQ 11 [ 1.335825] e100 0000:02:08.0: PME# disabled [ 1.481000] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000 [ 1.482170] e100: eth0: e100_probe: addr 0xc2004000, irq 11, MAC addr 00:08:0d:f8:25:c6 [ 1.482494] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 3 [ 1.482500] ohci1394 0000:02:07.0: PCI INT A -> Link[LNKF] -> GSI 3 (level, low) -> IRQ 3 [ 1.543768] Console: switching to colour frame buffer device 80x30 [ 1.552781] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[3] MMIO=[c2006000-c20067ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 1.932031] kjournald starting. Commit interval 5 seconds [ 1.932047] EXT3-fs: mounted filesystem with ordered data mode. [ 2.824175] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0000390000265a7c] [ 34.337696] Adding 1485972k swap on /dev/sda5. Priority:-1 extents:1 across:1485972k [ 34.380303] udev: starting version 151 [ 34.696156] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19-dev-acpikeys [ 34.696161] toshiba_acpi: HCI method: \_SB_.VALZ.GHCI [ 34.697095] toshiba_acpi: Toshiba hotkeys are sent as ACPI events [ 34.697099] toshiba_acpi: ktoshkeyd will check 2 times per second [ 34.705969] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 34.766750] lp: driver loaded but no devices found [ 34.768125] intel_rng: FWH not detected [ 34.797386] toshiba_acpi: Dropped 0 keys from the queue on startup [ 34.927390] EXT3 FS on sda1, internal journal [ 34.928468] parport_pc 00:09: activated [ 34.928475] parport_pc 00:09: reported by Plug and Play ACPI [ 34.928657] parport0: PC-style at 0x378 (0x778), irq 5, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 34.979206] lib80211: common routines for IEEE802.11 drivers [ 34.979212] lib80211_crypt: registered algorithm 'NULL' [ 34.999912] ppdev: user-space parallel port driver [ 35.036446] lp0: using parport0 (interrupt-driven). [ 35.098136] nvidia: module license 'NVIDIA' taints kernel. [ 35.098141] Disabling lock debugging due to kernel taint [ 35.674679] type=1505 audit(1281021782.905:2): operation="profile_load" pid=561 name="/sbin/dhclient3" [ 35.675443] type=1505 audit(1281021782.905:3): operation="profile_load" pid=561 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 35.675927] type=1505 audit(1281021782.905:4): operation="profile_load" pid=561 name="/usr/lib/connman/scripts/dhclient-script" [ 36.055141] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 36.055147] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx> [ 36.087458] yenta_cardbus 0000:02:0b.0: CardBus bridge found [1179:0001] [ 36.088780] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2 [ 36.088785] ipw2100: Copyright(c) 2003-2006 Intel Corporation [ 36.198346] Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb1, caps: 0x804713/0x0 [ 36.198356] synaptics: Toshiba Satellite M30 detected, limiting rate to 40pps. [ 36.212394] yenta_cardbus 0000:02:0b.0: ISA IRQ mask 0x0400, PCI irq 3 [ 36.212400] yenta_cardbus 0000:02:0b.0: Socket status: 30000007 [ 36.212406] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06 [ 36.212418] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 36.212423] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 36.212687] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0xc2000000 - 0xc20fffff [ 36.212691] yenta_cardbus 0000:02:0b.0: pcmcia: parent PCI bridge Memory window: 0x20000000 - 0x23ffffff [ 36.220480] ipw2100 0000:02:0a.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 36.221155] ipw2100: Detected Intel PRO/Wireless 2100 Network Connection [ 36.221178] ipw2100 0000:02:0a.0: firmware: requesting ipw2100-1.3.fw [ 36.285207] type=1505 audit(1281021783.517:5): operation="profile_load" pid=680 name="/usr/share/gdm/guest-session/Xsession" [ 36.287227] type=1505 audit(1281021783.517:6): operation="profile_replace" pid=681 name="/sbin/dhclient3" [ 36.288078] type=1505 audit(1281021783.521:7): operation="profile_replace" pid=681 name="/usr/lib/NetworkManager/nm-dhcp-client.action" [ 36.290416] type=1505 audit(1281021783.521:8): operation="profile_replace" pid=681 name="/usr/lib/connman/scripts/dhclient-script" [ 36.290619] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6 [ 36.310692] type=1505 audit(1281021783.541:9): operation="profile_load" pid=685 name="/usr/bin/evince" [ 36.444228] type=1505 audit(1281021783.677:10): operation="profile_load" pid=685 name="/usr/bin/evince-previewer" [ 36.461339] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 4 (level, low) -> IRQ 4 [ 36.461387] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 36.463663] type=1505 audit(1281021783.693:11): operation="profile_load" pid=685 name="/usr/bin/evince-thumbnailer" [ 36.480370] eth1: Radio is disabled by RF switch. [ 36.498675] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 36.498737] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 36.498961] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10 [ 36.498965] PCI: setting IRQ 10 as level-triggered [ 36.498971] nvidia 0000:01:00.0: PCI INT A -> Link[LNKG] -> GSI 10 (level, low) -> IRQ 10 [ 36.500553] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 36.646048] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 36.647005] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 36.647412] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 36.647771] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 36.650185] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 36.780994] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.784166] e100: eth0 NIC Link is Up 100 Mbps Full Duplex [ 36.805641] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 36.811164] apm: BIOS not found. [ 37.462380] agpgart-intel 0000:00:00.0: AGP 2.0 bridge [ 37.462397] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode [ 37.462433] nvidia 0000:01:00.0: putting AGP V2 device into 4x mode [ 37.756088] AC'97 1 does not respond - RESET [ 37.756293] AC'97 1 access is not valid [0xffffffff], removing mixer. [ 37.756300] Unable to initialize codec #1 [ 37.814964] intel8x0_measure_ac97_clock: measured 58356 usecs (2811 samples) [ 37.814968] intel8x0: clocking to 48000 [ 47.408036] eth0: no IPv6 routers present [ 66.936048] usb 1-2: new high speed USB device using ehci_hcd and address 2 [ 67.004337] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 67.272043] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 67.418013] usb 2-2: not running at top speed; connect to a high speed hub [ 67.452175] usb 2-2: configuration #1 chosen from 1 choice [ 67.545413] Initializing USB Mass Storage driver... [ 67.545554] scsi2 : SCSI emulation for USB Mass Storage devices [ 67.545737] usbcore: registered new interface driver usb-storage [ 67.545741] USB Mass Storage support registered. [ 67.553395] usb-storage: device found at 2 [ 67.553399] usb-storage: waiting for device to settle before scanning [ 72.556052] usb-storage: device scan complete [ 72.559215] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 2.0 1.00 PQ: 0 ANSI: 2 [ 72.559733] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 72.587169] sd 2:0:0:0: [sdb] 3905407 512-byte logical blocks: (1.99 GB/1.86 GiB) [ 72.590257] sd 2:0:0:0: [sdb] Write Protect is off [ 72.590263] sd 2:0:0:0: [sdb] Mode Sense: 0b 00 00 08 [ 72.590267] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 72.606155] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 72.606163] sdb: sdb1 [ 72.767132] sd 2:0:0:0: [sdb] Assuming drive cache: write through [ 72.767141] sd 2:0:0:0: [sdb] Attached SCSI removable disk [ 136.448096] usb 2-2: USB disconnect, address 2 [ 324.248082] usb 2-2: new full speed USB device using uhci_hcd and address 3 [ 324.409375] usb 2-2: configuration #1 chosen from 1 choice Module Size Used by nls_iso8859_1 3249 0 nls_cp437 4919 0 vfat 8933 0 fat 47767 1 vfat usb_storage 39425 0 binfmt_misc 6587 1 snd_intel8x0 25588 2 snd_ac97_codec 100646 1 snd_intel8x0 ac97_bus 1002 1 snd_ac97_codec snd_pcm_oss 35308 0 joydev 8708 0 snd_mixer_oss 13746 1 snd_pcm_oss snd_pcm 70662 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 1338 0 pcmcia 33024 0 snd_seq_oss 26726 0 snd_seq_midi 4557 0 snd_rawmidi 19056 1 snd_seq_midi snd_seq_midi_event 6003 2 snd_seq_oss,snd_seq_midi snd_seq 47263 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 19098 2 snd_pcm,snd_seq snd_seq_device 5700 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ipw2100 66395 0 yenta_socket 20408 1 snd 54148 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device rsrc_nonstatic 10015 1 yenta_socket libipw 39896 1 ipw2100 nvidia 7087672 24 ppdev 5259 0 lib80211 5046 1 libipw pcmcia_core 32964 3 pcmcia,yenta_socket,rsrc_nonstatic parport_pc 25962 1 psmouse 63245 0 serio_raw 3978 0 soundcore 6620 1 snd snd_page_alloc 7076 2 snd_intel8x0,snd_pcm shpchp 28820 0 toshiba_acpi 8662 0 lp 7028 0 parport 32635 3 ppdev,parport_pc,lp fbcon 35102 71 ohci1394 26950 0 e100 28211 0 video 17375 0 tileblit 2031 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit intel_agp 24119 1 mii 4381 1 e100 output 1871 1 video ieee1394 81181 1 ohci1394 vga16fb 11385 1 vgastate 8961 1 vga16fb agpgart 31724 2 nvidia,intel_agp
