Tim, Sorry. Wasn't under Linux previously. Per below, just command "make" Marv ----------- agrsm06pci-2.1.80~20100106$ make make -C /lib/modules/2.6.32-23-generic/build M=/usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106 modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-23-generic' CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.o /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function ‘x_linux_dbg_print_crit’: /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:349: warning: the frame size of 1540 bytes is larger than 1024 bytes /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c: In function ‘x_linux_dbg_print’: /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrsoftmodem.c:337: warning: the frame size of 1540 bytes is larger than 1024 bytes CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/hda.o CC [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/serial26.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.o Building modules, stage 2. MODPOST 2 modules WARNING: could not find /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/.agrmodemlib.o.cmd for /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodemlib.o CC /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.mod.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrmodem.ko CC /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.mod.o LD [M] /usr/src/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106/agrserial.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-23-generic' marv@marvmac:~/pkg/agrsm/0620/agrsm06pci-2.1.80~20100106$ ls -l *.ko -rw-r--r-- 1 marv staff 1677955 2010-07-30 21:24 agrmodem.ko -rw-r--r-- 1 marv staff 18961 2010-07-30 21:24 agrserial.ko On Fri, Jul 30, 2010 at 4:02 AM, Timothy Pang <timothy.pang@xxxxxxxxxxxx> wrote: > > Dear Marvin, > > Here is the make module: > > demo2:/tmp/modem/agrsm06pci-2.1.80~20100106 # make module > make: *** No rule to make target `module'. Stop. > > > Thanks/Timothy > > >> -----Original Message----- >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> To: Timothy Pang <timothy.pang@xxxxxxxxxxxx>, Linmodems <discuss@xxxxxxxxxxxxx> >> Date: 2010-07-29 18:40 >> Subject: Re: Re[2]: Install problem when using USB modem in SUSE enterprise server 10 >> >> Do: >> $ make module >> >> Please send to the List. I am not the expert in this package >> >> MarvS >> >> On Wed, Jul 28, 2010 at 11:22 PM, Timothy Pang >> <timothy.pang@xxxxxxxxxxxx> wrote: >> > >> > Dear Mavin, >> > >> > Many Thanks your billion reply! I had try to install the agrsm06pci-2.1.80~20100106.tar.gz but got the below error. Any idea? >> > >> > ------------------------------------------------------------------------------------------------------------------------------------------------- >> > demo1:/tmp/tim/New Modem # tar xzvf agrsm06pci-2.1.80~20100106.tar.gz >> > agrsm06pci-2.1.80~20100106/ >> > agrsm06pci-2.1.80~20100106/agrmodemlib.o_shipped >> > agrsm06pci-2.1.80~20100106/agr_auxinst >> > agrsm06pci-2.1.80~20100106/dkms.conf >> > agrsm06pci-2.1.80~20100106/agrmodem.h >> > agrsm06pci-2.1.80~20100106/agrinst >> > agrsm06pci-2.1.80~20100106/postinst >> > agrsm06pci-2.1.80~20100106/serial26.c >> > agrsm06pci-2.1.80~20100106/agrsm-test >> > agrsm06pci-2.1.80~20100106/config.h >> > agrsm06pci-2.1.80~20100106/agruninst >> > agrsm06pci-2.1.80~20100106/1stReadme.txt >> > agrsm06pci-2.1.80~20100106/agrsm.conf >> > agrsm06pci-2.1.80~20100106/agr_softmodem >> > agrsm06pci-2.1.80~20100106/LICENSE >> > agrsm06pci-2.1.80~20100106/Module.markers >> > agrsm06pci-2.1.80~20100106/agrsoftmodem.c >> > agrsm06pci-2.1.80~20100106/8250.h >> > agrsm06pci-2.1.80~20100106/hda_codec.h >> > agrsm06pci-2.1.80~20100106/linuxif.h >> > agrsm06pci-2.1.80~20100106/Kbuild >> > agrsm06pci-2.1.80~20100106/Makefile >> > agrsm06pci-2.1.80~20100106/AgereMdmDaemon >> > agrsm06pci-2.1.80~20100106/hda.c >> > agrsm06pci-2.1.80~20100106/modules.order >> > demo1:/tmp/tim/New Modem # cd agrsm >> > bash: cd: agrsm: No such file or directory >> > demo1:/tmp/tim/New Modem # ls >> > agrsm06pci-2.1.80~20100106 agrsm-11c11040-2.1.80~20091225.tar.bz2 >> > agrsm06pci-2.1.80~20100106.tar.gz >> > demo1:/tmp/tim/New Modem # cd agrsm06pci-2.1.80~20100106 >> > demo1:/tmp/tim/New Modem/agrsm06pci-2.1.80~20100106 # ls >> > 1stReadme.txt agrmodemlib.o_shipped config.h linuxif.h >> > 8250.h agrsm.conf dkms.conf Makefile >> > AgereMdmDaemon agrsm-test hda.c Module.markers >> > agr_auxinst agr_softmodem hda_codec.h modules.order >> > agrinst agrsoftmodem.c Kbuild postinst >> > agrmodem.h agruninst LICENSE serial26.c >> > demo1:/tmp/tim/New Modem/agrsm06pci-2.1.80~20100106 # make >> > make -C /lib/modules/2.6.16.60-0.54.5-bigsmp/build M=/tmp/tim/New Modem/agrsm06pci-2.1.80~20100106 modules >> > make[1]: Entering directory `/usr/src/linux-2.6.16.60-0.54.5-obj/i386/bigsmp' >> > make[1]: *** No rule to make target `Modem/agrsm06pci-2.1.80~20100106'. Stop. >> > make[1]: Leaving directory `/usr/src/linux-2.6.16.60-0.54.5-obj/i386/bigsmp' >> > make: *** [default] Error 2 >> > demo1:/tmp/tim/New Modem/agrsm06pci-2.1.80~20100106 # sudo make install >> > make: *** No rule to make target `install'. Stop. >> > ------------------------------------------------------------------------------------------------------------------------------------------------ >> > >> > Thanks/Timothy >> > >> >> -----Original Message----- >> >> From: Marvin Stodolsky <marvin.stodolsky@xxxxxxxxx> >> >> To: Timothy Pang <timothy.pang@xxxxxxxxxxxx>, Linmodems <discuss@xxxxxxxxxxxxx> >> >> Date: 2010-07-29 07:16 >> >> Subject: Re: Install problem when using USB modem in SUSE enterprise server 10 >> >> >> >> Timothy >> >> >> >> This software Agere packages agrsm06pci-2.1.80~20100106.tar.gz or >> >> agrsm-11c11040-2.1.80~20091225.tar.bz2 at >> >> http://linmodems.technion.ac.il/packages/ltmodem/11c11040/ should in >> >> principle support your USB modem, But there is yet to be a success >> >> report despite several tries. >> >> Loading agrmodem, agrserial will create a port /dev/ttyAGS3, which is >> >> the true modem port. >> >> >> >> MarvS >> >> >> >> On Tue, Jul 27, 2010 at 10:40 PM, Timothy Pang >> >> <timothy.pang@xxxxxxxxxxxx> wrote: >> >> > Dear Marvin, >> >> > >> >> > >> >> > >> >> > I am appreciate that if you would tell me how to setup the USB modem in SUSE >> >> > enterprise 10? As I know e.g for the COM will use ttyS0 but usb should >> >> > ttyUSB0 or others. But in /var/log/messages only show as below. Didn't show >> >> > ttyUSB0 or others. Please advise where can I found it and set it ! If no, >> >> > How can I set in inittab ? >> >> > >> >> > >> >> > >> >> > # modem getty >> >> > >> >> > mo:235:respawn:/usr/sbin/mgetty –s 38400 /dev/modem >> >> > >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: new high speed USB device using >> >> > ehci_hcd and address 8 >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: new device found, idVendor=047e, >> >> > idProduct=2892 >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: new device strings: Mfr=1, Product=2, >> >> > SerialNumber=0 >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: Product: Agere USB2.0 V.92 SoftModem >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: Manufacturer: Agere Systems >> >> > Jul 26 08:08:55 demo1 kernel: usb 1-4: configuration #2 chosen from 1 choice >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > 03: USB 00.0: 0000 Unclassified device >> >> > >> >> > [Created at usb.123] >> >> > >> >> > UDI: /org/freedesktop/Hal/devices/usb_device_47e_2892_noserial_if0 >> >> > >> >> > Unique ID: 1Yic.Yt+jriS6j2B >> >> > >> >> > Parent ID: k4bc.eTsZyIgHxO4 >> >> > >> >> > SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:2.0 >> >> > >> >> > SysFS BusID: 1-1:2.0 >> >> > >> >> > Hardware Class: unknown >> >> > >> >> > Model: "Agere (Lucent) Agere USB2.0 V.92 SoftModem" >> >> > >> >> > Hotplug: USB >> >> > >> >> > Vendor: usb 0x047e "Agere (Lucent)" >> >> > >> >> > Device: usb 0x2892 "Agere USB2.0 V.92 SoftModem" >> >> > >> >> > Revision: "2.00" >> >> > >> >> > Speed: 480 Mbps >> >> > >> >> > Module Alias: "usb:v047Ep2892d0200dcFFdsc00dp00icFFisc00ip00" >> >> > >> >> > Config Status: cfg=no, avail=yes, need=no, active=unknown >> >> > >> >> > Attached to: #2 (Hub) >> >> > >> >> > >> >> > >> >> > Your help will be very very appreciated! >> >> > >> >> > >> >> > >> >> > Many Thanks/Timothy >> > >> > > >
