Hi everybody I'm Cristian Iturri from Argentina, this is the first time
I write to this list after fighting with an external Dell USB Modem (I
lost the battle).
Next oponent is the SmartLink (with SL2800 chip) Internal PCI Modem.
I've installed a PCI Modem on my computer wich I use as an Asterisk PBX.
I've ran the scanModem tool and this is the ModemData.txt info
-------------------------- System information ----------------------------
CPU=i686, CentOS
Kernel , ALSA_version=
Linux version 2.6.18-92.1.22.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx) (gcc
version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Dec 16 12:03:43
EST 2008
scanModem update of: 2010_05_29
/etc/lsb-release not found
Presently install your Linux Distributions dkms package. It provides for
automated driver updates,
following upgrade of your kernel. For details see
http://linux.dell.com/projects.shtml#dkms
There are no blacklisted modem drivers in /etc/modprobe* files
Potentially useful modem drivers now loaded are:
Attached USB devices are:
ID 413c:2106 Dell Computer Corp.
If a cellphone is not detected, see
http://ubuntuforums.org/archive/index.php/t-878554.html
A sample report is:
http://linmodems.technion.ac.il/bigarch/archive-nineth/msg00578.html
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@xxxxxxxxxxxxx
Candidate PCI devices with modem chips are:
04:01.0 Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT (rev 02)
High Definition Audio cards can host modem chips.
For candidate card in slot 04:01.0, firmware information and bootup
diagnostics are:
PCI slot PCI ID SubsystemID Name
---------- --------- --------- --------------
04:01.0 2000:2800 163c:2800 Modem: Smart Link Ltd.
SmartPCI2800 V.92 PCI Soft DFT
Modem interrupt assignment and sharing:
169: 12 16 IO-APIC-level uhci_hcd:usb5
--- Bootup diagnostics for card in PCI slot 04:01.0 ----
PCI: Cannot allocate resource region 0 of device 0000:04:01.0
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt for device 0000:04:01.0 disabled
The PCI slot 04:01.0 of the modem card may be disabled early in
a bootup process, but then enabled later. If modem drivers load
but the modem is not responsive, read DOCs/Bootup.txt about possible
fixes.
Send dmesg.txt along with ModemData.txt to discuss@xxxxxxxxxxxxx
if help is needed.
=== Finished firmware and bootup diagnostics, next deducing cogent
software. ===
Predictive diagnostics for card in bus 04:01.0:
Modem chipset detected on
NAME="Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT "
CLASS=0703
PCIDEV=2000:2800
SUBSYS=163c:2800
IRQ=169
IDENT=slamr
For candidate modem in: 04:01.0
0703 Modem: Smart Link Ltd. SmartPCI2800 V.92 PCI Soft DFT
Primary device ID: 2000:2800
Support type needed or chipset: slamr
The modem is supported by the Smartlink
plus the slmodemd helper utility. Read the
DOCs/Smartlink.txt and Modem/DOCs/YourSystem.txt for follow through
guidance.
For 2.6.18-92.1.22.el5 compiling drivers is necessary. As of October
2007 the current packages at
http://linmodems.technion.ac.il/packages/smartlink/ are the
ungrab-winmodem-20070505.tar.gz and slmodem-2.9.11-20080126.tar.gz
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
I've verified the dmesg log and it says:
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
PCI: Cannot allocate resource region 0 of device 0000:04:01.0
blablabla
ACPI: PCI Interrupt 0000:04:01.0[A] -> GSI 16 (level, low) -> IRQ 169
ACPI: PCI interrupt for device 0000:04:01.0 disabled
next I've downloaded and compiled/installed both
ungrab-winmodem-20090716.tar.gz and slmodem-2.9.11-20100303.tar.gz
modprobe ungrab-winmodem goes OK but
modprobe slamr shows this "FATAL: Error inserting slamr
(/lib/modules/2.6.18-92.1.22.el5/extra/slamr.ko): Cannot allocate memory"
Can anyone give me some help on this please?
