Try [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem Phone = 6045551212 ISDN = 0 Password = mypassword New PPPD = yes Username = beepzap Modem = /dev/ttySL0 Baud = 115200 Carrier Check = no ## the two below are for your USB modem, not the modem using the slamr driver. # Modem = /dev/ttyUSB1 # Baud = 9600 MarvS On Fri, Jun 25, 2010 at 8:18 AM, <beepzapmdm.amabel@xxxxxxxxxxxx> wrote: > As Jacques requested, here's a copy of my /etc/wvdial.conf > > --- start of /etc/wvdial.conf ---- > > [Dialer Defaults] > Init1 = ATZ > Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 > Modem Type = Analog Modem > Phone = 6045551212 > ISDN = 0 > Password = mypassword > New PPPD = yes > Username = beepzap > Modem = /dev/ttyUSB1 > Baud = 9600 > Carrier Check = no > > > --- end of /etc/wvdial.conf ---- > > I anonymized: > the phone number, password, and username. > > > Thanks. > > > >
